This Large LED Bath Vanity Light blends sophisticated details with vintage touches into a streamlined light for bathrooms, en suites, and powder rooms. This bright, Etched White Glass tube can be securely mounted vertically or horizontally - hidden mounting hardware on the 4.75" dia. backplate ensures a clean, silhouette. Illuminated by a 36w integrated LED unit, it is dimmable with a CL-type dimmer (SSL7A). Cast aluminum Chrome bracelet around the cylindrical shade, with matching caps at either end.
Stylish and high quality. Lights are extremely bright at full voltage, so definitely use a dimmer control. The only difficulty I had was the install clearance. I installed four of these over a double sink vanity cabinet and the far left fixture is only 2 in from the left side wall. Likewise, the far right fixture is only 1/2 in from the quarter round tile. Unfortunately, the wall canopies each have attachment screws on the sides and it was virtually impossible to place these screws into the canopy holes, much less tighten them with a screwdriver. If your side clearance is tight, be aware of this. Would have been easy if the screws were on top and bottom of canopy instead of left and right. I ended up installing the screws with a pair of needle nose pliers and about a half hour of frustration. Still, it was impossible to tighten them fully since the screws are flat head and tighten flush with the countersink on the canopy side. If I had more clearance, installation would have been simple. We'll protected packaging and very stylish and well made lights.. Joe375. San Jose, CA. Sun Sep 12 2021
