Prime-Line Door Stops

Machine screws have a uniform diameter along their entire length and are designed to screw into threaded holes or to be used in combination with machine screw hex nuts. Other nuts can be used other than just hex head nuts, washers can also make your assembly easier as well. Make sure the inside diameter matches the screw size. Typically they are most often used in machinery and appliances, however they can have a multitude of different uses. The first dimension is the size of the threaded shaft of the screw and the second dimension is the length of the screw. Each package contains 10 screws.

These door stops are constructed of diecast and come in a brass plated finish. They feature a rigid shaft construction and a white rubber tip to cushion and prevent unwanted damage to nearby walls. This rigid door stops mount over the baseboard with a wood screw insert affixed behind the base of the stops, they are easy to install and used by many.

This is a drop down door holder that is 4 inch in length with a rubber tip. The 3 hole mounting with a spring-loaded design that retracts in the up position when not in use.

My door is heavy and I needed a drop down holder.. Elizabeth. AB. Fri Dec 30 2022

These step-on door holders are constructed of diecast material and come in an aluminum painted color. These step-on door holders measure a full 9-inches in overall height from tip to tip when fully extended, with a 1-1/4 inch reach. Door holders like these operate with a simple downward press of the plastic foot pedal to engage the bolt, and a downward press of the steel tab to disengage and retract the bolt into its housing, all without having to bend, kneel or squat. These plunger bolt type door holders are designed for use with all swinging doors in both residential and commercial applications. They feature a spring-loaded mechanism that helps keep them in the upright, stored position when not in use, and they're designed to hold swinging doors open at a desired location, with replacement tips available under model 658-1054. Door-mounted holders like these are easy to install and are used by many. Installation fasteners are included with each door holder.

Do you have a need for a door stop and want a wooden one rather than metal? You now have that option when you choose to purchase these oak wood door stops. These dome type floor stops are constructed of solid sapelly wood and a rubber bumper. These floor stops are designed to stop low swinging doors from damaging adjacent walls and furnishings. Each package includes all the necessary installation fasteners. Dome type floor stops like these are used by many and are easy to install. Installation note: the predrilled hole in the stopper has a tight tolerance by design to hold the stop securely in place once installed.

These 30-degree hinge pin door stops are constructed of diecast and come in a brass plated finish. They feature an adjustable screw that allows for controlled stopping at various angles of the door swing and dual rubber tips for cushioning stops. These types of door stops require no fasteners to install, as they are mounted onto the door’s hinge or hinges.

These 30-degree hinge pin door stops are constructed of diecast. They feature an adjustable screw that allows for controlled stopping at various angles of the door swing and dual rubber tips for cushioning stops. These types of door stops require no fasteners to install, as they are mounted onto the door’s hinge or hinges. These doorstops will work with hinge barrel pins that have a maximum outside diameter of 5/16 in., and they can be installed on one, two, or three hinges of a door. Doorstops like these are simple to install and they are used by many.

Sonja. Caswell Beach. Sun Feb 22 2026

These wall mount door stops are constructed of zinc alloy (cast Zamak) and come in a chrome plated finish. These door stops feature a 2 in. projection and a black rubber tip. They are designed for use with all swinging doors and have 1-5/8 in. mounting hole centers. Door stops like these are designed to prevent damages from hard closing doors to adjacent walls and furnishings, in addition to the doors own knob or lever hardware. Wall-mounted door stops like these are easy to install and are used by many. Tamper resistant T-27 Torx security fasteners for installation of all components. These fasteners feature tamper-resistant 6-lobe security drives with center pins.

These door holders are constructed of a heavy duty diecast material and come in a beautiful finish. Each of these door holders feature a 4-inch, drop-down reach and have replaceable black rubber tips. These kick stand type, drop down door holders are designed for use with all swinging doors in both residential and commercial applications. They also feature a spring-loaded mechanism that helps keep them in the upright, stored position when not in use. Door holders like these are designed to hold swinging doors open at a desired location, with replacement tips available under model number 658-1051. Door-mounted holders like these are easy to install and are used by many. Installation fasteners are included with each door holder.

This wall stop is constructed of a stamped steel cover, a retainer plate and a protruding concave rubber bumper. The steel cover comes in a brushed stainless steel finish and the rubber bumper is gray in color. The cover and bumper attach to the retainer plate with a concealed fastener, which fastens the entire assembly to the wall with a single wall anchor through the center of the stop. This item will not repair holes caused by door knobs, but can prevent them when installed correctly.

These 90-degree hinge pin door stops are constructed of diecast and come in a brass plated finish. They feature an adjustable screw that allows for controlled stopping at various angles of the door swing and dual rubber tips for cushioning stops. These types of door stops require no fasteners to install, as they are mounted onto the door’s hinge or hinges. These doorstops will work with hinge barrel pins and they can be installed on one, two, or three hinges of a door. Doorstops like these are simple to install and they are used by many.

These heavy-duty door stops are constructed of diecast and come in a brass plated finish. They feature a rigid shaft construction and a white rubber tip to cushion and prevent unwanted damage to nearby walls. This rigid door stop is mounted over the baseboard with a wood screw insert affixed to the base of the stop. Doorstops like these are easy to install and used by many.

These heavy-duty door stops are constructed of spring steel wire and come in a chrome-plated finish. They feature a separate mounting base and screw to allow for use of longer screws where broken baseboards are a problem. These door stops also feature flexible wire construction and a rubber tip to cushion and prevent unwanted damage to nearby walls. Doorstops like these are easy to install and used by many.

This floor stop is constructed of a solid steel and comes in a brushed aluminum finish. Its rubber bumper is designed to stop a swinging door from damaging adjacent walls and furnishings, and it comes with dual mounting holes. It features a tall 2-11/16 inch reach and a 2-1/2 inch base. This item includes 2 wood screws and 2 plastic anchors required for installation.

This is a baseboard-mounted rigid doorstop. Easy to install. Used to prevent doors from opening too far and hitting the wall.

These wall protectors are constructed of rigid vinyl and they come with a textured surface. They feature a self-adhesive backing which allows them to be easily mounted in place. Designed to protect interior walls from impact damage by shielding between the point of contact of the walls and door knobs. Wall protectors can sometimes be used also to conceal small holes in walls caused by door knobs.

Easy to install and good glue. Myraida. US. Mon Aug 19 2024

This door stop is constructed of a cast brass alloy and comes in a brushed chrome finish. It includes a rubber bumper, a hook and keeper to both stop a swinging door and hold it open. It features a tall 3-1/4 inch reach and a wide 2-1/8 inch diameter base. This item includes all necessary fasteners and plastic anchors required for installation, including a large concealed center bolt for strongest mount.

They feature a separate mounting base and screw to allow for use of longer screws where broken baseboards are a problem. These door stops also feature flexible wire construction with reach, and a rubber tip to cushion and prevent unwanted damage to adjacent walls. The mounting bases of these door stops have a large outside diameter. Doorstops like these are easy to install and are used by many.

Door stop appears as expected. Has nice finish and no surprises. Time will tell if the plating holds up but there are no indications of lesser quality. Soft plastic cap is not as nice as the old rubber material but will probably last a lot longer. So, satisfied that this was a good choice for my home renovation project.. Stephen. US. Wed Oct 08 2025

These door stops are constructed of spring steel wire and come in a brass plated finish. They feature a flexible wire construction with a 3 in. reach, and a rubber tip to cushion and prevent unwanted damage to nearby walls. This flexible door stops is mounted at the baseboard with an affixed wood screw insert found at the base of the stop. Doorstops like these are easy to install and used by many.

Doorstop wedges like these are designed for use under swinging doors, where the bottom of the door swings at only maximum above the surface of the floor. These doorstop wedges are easy to use and they are used by many.

They feature a flexible wire construction with a reach, and a rubber tip to cushion and prevent unwanted damage to nearby walls. This flexible door stop is mounted at the baseboard with an affixed wood screw insert found at the base of the stop. Doorstops like these are easy to install and used by many.

These door stops are constructed of spring steel wire and come in an antique brass plated finish. They feature a flexible wire construction with a 3 in. reach, and a rubber tip to cushion and prevent unwanted damage to nearby walls. This flexible door stop is mounted at the baseboard with an affixed wood screw insert found at the base of the stop. Doorstops like these are easy to install and used by many.

Good value. Tabassum. Los Angeles, CA. Mon Apr 20 2026

Do you have a need for a door stop and want a wooden one rather than metal? You now have that option when you choose to purchase these sapelly wood door stops. With the pre-installed magnet this door stop will also hold your door open. These dome type floor stops are constructed of solid sapelly wood and an installed magnet. These floor stops are designed to stop low swinging doors from damaging adjacent walls and furnishings. Each package includes all the necessary installation fasteners. Dome type floor stops like these are used by many and are easy to install.

Use the Prime-Line wall shield to protect interior walls from impact damage by shielding the point of contact on the wall from a door knob. The shield wall protectors can also be used to conceal small holes in walls and prevent further damage caused by a doorknob. These wall shield protectors are constructed from rigid vinyl. They have a ivory finish with a paintable smooth surface, allowing you to easily match the protector to any wall. Quickly mount the 5 inch diameter wall hole covers in place using the self-adhesive backing. Please refer to the line art for dimensions and compare with your needs before purchasing.

Works very well.. Anonymous. Sat Jan 25 2025

They feature a separate mounting base and screw to allow for use of longer screws where broken baseboards are a problem. These door stops also feature flexible wire construction with a reach, and a rubber tip to cushion and prevent unwanted damage to nearby walls. The mounting bases of these door stops have a large outside diameter. Doorstops like these are easy to install and used by many.

These hexagon-shaped wall protectors are constructed of rigid vinyl and they come in an ivory color. They feature a self-adhesive backing which allows them to be easily mounted in place. Designed to protect interior walls from impact damage by shielding between the point of contact of the walls and doorknobs. Wall protectors can sometimes be used also to conceal small holes in walls caused by doorknobs.

These dome type floor stops are constructed of cast brass and a rubber bumper, and they come in a beautifl finish. These floor stops are designed to stop low swinging doors from damaging adjacent walls and furnishings, and they include the necessary installation fasteners. Dome type floor stops like these are used by many and are easy to install. 658-1027 comes in a satin nickel finish and 658-1030 come sin a brushed chrome finish.

They feature a separate mounting base and screw to allow for use of longer screws where broken baseboards are a problem. These door stops also feature flexible wire construction with reach, and a rubber tip to cushion and prevent unwanted damage to adjacent walls. The mounting bases of these door stops have a large outside diameter. Doorstops like these are easy to install and are used by many.

These stop mount door silencers are constructed of pliable rubber and come gray in color. They are designed for use on hollow metal door jambs and require a 1/4-inch hole to insert into. These door bumpers feature an overall length of 1/2-inch, with a projected cushion of 1/8-inch once installed. Door silencers like these are designed to reduce loud latching hardware from hard closing doors. Rubber bumpers like these are easy to install and are used by many.

This door knob bumper is constructed of clear vinyl and comes with a recessed mounting hole and fastener for a simple, yet reliable install. This door bumper features a 3/4 in. projection which helps prevent holes in walls, and because of its clear construction, it offers almost unnoticeable protection once mounted. This bumper is easy to install and remove for painting purposes and it is used by many. This item does not include an adhesive backing.

Bought this and it was too small. Decided to keep it instead of paying postage to return. I’m sure we will use it at some point. Debra. US. Mon Jun 15 2026

Use a Prime-Line J 4648 Wall Shield to protect interior walls from impact damage by shielding the contact point of the wall and the doorknob. The doorknob protectors have a wall mount design with a threaded collar and base for added protection. Constructed of solid brass, the wall pads have a bronze finish. The convex bumper is included. Each square doorknob protector measures 1 inch in diameter with a 9/16 inch projection. Please refer to the wall stopper line art drawing for dimensions and compare it to your needs before purchasing.

Protect interior walls from damage and maintain a clean, finished appearance with this five inch wall protector. Designed to shield wall surfaces from repeated contact with door knobs, this wall guard helps prevent dents, scuffs, punctures, and other impact damage commonly caused by swinging doors. It is an ideal solution for homes, apartments, offices, rental properties, and commercial spaces where protecting walls can reduce maintenance and repair costs. Constructed from durable rigid vinyl, this wall protector is built to withstand everyday impact while providing long-lasting performance. The smooth white finish blends with most interior décor and features a paintable surface, allowing it to be customized to match existing wall colors and finishes. In addition to preventing future damage, it can also be used to conceal small holes, blemishes, and other imperfections caused by door hardware. Measuring five inches in diameter, this wall protector provides ample coverage around the point of contact between the door knob and wall surface. The self-adhesive backing allows for fast and easy installation without the need for tools, fasteners, or additional adhesives. Simply position the protector over the desired location and press firmly into place. Whether you are repairing damaged walls, preventing future impact marks, or completing a home improvement project, this wall protector provides a simple, affordable, and effective solution. Its durable construction, paintable finish, and quick installation make it a practical addition to any interior space.

Cool little wall protector that just sticks to your wall. Seems like it will be there for some time and won’t be coming off on its own. We have cream walls and it is a stark white color but it does not look weird with an overall view of the room.. Olivia. Memphis, TN. Fri Apr 25 2025

These 2 in. square wall protectors are constructed of rigid vinyl and they come ivory in color with a textured surface. They feature a self-adhesive backing which allows them to be easily mounted in place. These wall protectors are designed to protect interior walls from impact damage by shielding between the point of contact of the walls and door knobs. These wall protectors can sometimes be used also to conceal small holes in walls caused by door knobs.

The little squares are great for protecting my wall from getting scratched by the dining chairs. Very easy to peal and stick.. Debra. Tucson, AZ. Sat Jun 20 2026

This is a wall protector. It is constructed of ivory vinyl and is self-adhesive. The surface is paintable and smooth. Helps to protect your walls from impact damage from a doorknob, and is ideal for repair on walls that have already sustained damage from a doorknob.

This is a set of two black rubber door bumpers that can be used on most closet or patio doors. Each bumper has a 1 inch diameter and 1-1/2 inch long black rubber bumper with steel insert washer. The rubber bumper is fastened on the appropriate door jamb to prevent slamming. Patio doors usually use one on the opposite side of the opened side to prevent slamming when the door is opened.

These heavy-duty door stops are constructed of diecast and come in a brass plated finish. They feature a rigid shaft construction with a reach, and a white rubber tip to cushion and prevent unwanted damage to nearby walls. This rigid door stop is mounted over the baseboard with a wood screw insert affixed to the base of the stop. Doorstops like these are easy to install and used by many.

Use the Prime-Line wall shield to protect interior walls from impact damage by shielding the point of contact on the wall from a door knob. The shield wall protectors can also be used to conceal small holes in walls and prevent further damage caused by a doorknob. These wall shield protectors are constructed from rigid vinyl. They have a white finish with a paintable textured surface, allowing you to easily match the protector to any wall. Quickly mount the 7 inch diameter wall hole covers in place using the self-adhesive backing. Please refer to the line art for dimensions and compare with your needs before purchasing.

Great product.. Anonymous. Fri Aug 16 2024

Do you have a drop-down or kick-down doorstop and the rubber is worn away or damaged? This is a replacement tip for drop-down door holders. The rubber tip is secured in place with a screw which is included. With the screw-in style, it makes replacement fast and easy when replacing worn-out tips. Order yours today.

These rubber bumper tips replace worn, damaged, and missing tips from restroom partition door stops and hangers. They are easy to install and are used by many.

These wall protectors are constructed of rigid vinyl and they come off-white in color with a textured surface. They feature a self-adhesive backing which allows them to be easily mounted in place. Designed to protect interior walls from impact damage by shielding between the point of contact of the walls and door knobs. Wall protectors can sometimes be used also to conceal small holes in walls caused by door knobs.

These door holders are constructed of a heavy cast iron material and come in an aluminum colored, painted finish. Each of these door holders feature a 4 inch, drop-down reach and have replaceable gray rubber tips. These kick stand type, drop down door holders are designed for use with all swinging doors in both residential and commercial applications. They also feature a spring-loaded mechanism that helps keep them in the upright, stored position when not in use. Door holders like these are designed to hold swinging doors open at a desired location, with replacement tips available under model numbers 658-1053 (gray), or 658-1052 (black). Door-mounted holders like these are easy to install and are used by many. Installation fasteners are included with each door holder.

These wall protectors are constructed of rigid vinyl and they come ivory in color with a textured surface. They feature a self-adhesive backing which allows them to be easily mounted in place. Designed to protect interior walls from impact damage by shielding between the point of contact of the walls and door knobs. Wall protectors can sometimes be used also to conceal small holes in walls caused by door knobs.

These wall mount door stops are constructed of zinc alloy (cast Zaman) and come in a chrome plated finish. These door stops feature a 2-in. projection and a black rubber tip. They are designed for use with all swinging doors and have 1-5/8-in. mounting hole centers. Door stops like these are designed to prevent damages from hard closing doors to adjacent walls and furnishings, in addition to the doors own knob or lever hardware. Wall-mounted door stops like these are easy to install and are used by many. Tamper resistant, one-way fasteners are included with each stop.

These door stops are constructed of diecast. They feature a rigid shaft construction with a 3 in. reach, and a white rubber tip to cushion and prevent unwanted damage to nearby walls. This rigid door stop is mounted over the baseboard with a wood screw insert affixed to the base of the stop. Doorstops like these are easy to install and used by many.

These are the perfect antique brass and will go well with her door hinges and doorknobs, we can’t wait to put it all together!. Michele. NY. Fri Sep 11 2026

This hook and bumper is constructed of zinc alloy (cast Zeman ) and comes in a chrome plated finish. It features dual hooks that ensure a non-slip off of garments, or bags, and a black rubber bumper on its tip. This hook and bumper has a small hook atop the end of the projecting arm, and another larger hook beneath the straight arm of the bumper. It is installed with two fasteners through the diamond shaped mounting base. The T-27 Torn security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.