Clear Cabinet & Drawer Hardware

The 18” sample pack is an introductory pack of cabinet hero’s best-selling products. It features the “slimline”, a low profile slip-on cover with minimal appearance to guard the edge of a cabinet door or drawer front. As well as the “drip ramp”, a versatile kitchen cabinet protector specifically designed for high moisture areas under the sink or on a trash pull-out door. Both protectors fit flat top, 0.75" thick doors and drawer fronts even on tight fit euro-style & inset cabinets. Comes in 18” lengths but can be cut to fit smaller doors/drawer fronts. Children and pets are safe.

They were a test model and they fit perfectly! I will be buying several ore right after the holidays.. Rosalind. Staten Island, NY. Wed Dec 25 2024

Cabinet drawer precision alignment kit with 3/16" drill bit, to easily mount knobs and pulls to your cabinets with precision. Door guide features a cluster of knob hole placements and center to center hole template for the following: 3" (both low and high placement), 3-1/2", 96mm (3-3/4"), & 4". Drawer guide features center to center hole template for the following: 64mm (2-1/2"), 3", 3-1/2", 96mm (3-3/4"), 4", 4-1/2", & 128mm (5-1/16").

Helpful and easy to use.. Kelsey. Sioux Falls, SD. Sun Apr 05 2026

Cultivate a secure, worry-free living environment for your loved ones with our 6ft Clear Silicone Edge Protector Trim. Measuring a sleek and low-profile 2/5 x 2/5 inches, this premium flexible guard is meticulously crafted from 100% premium grade silicone, offering exceptional cushioning that outperforms standard thin plastics. Its highly transparent, crystal-clear appearance blends seamlessly into any furniture color or finish, remaining virtually unnoticeable from a distance and preserving your home's original design integrity. Engineered with convenient pre-taped adhesive backing, it eliminates the messy installation process of traditional guards—simply peel, position, and press onto any cleaned surface including wood, glass, metal, and marble. Gentle on your home yet remarkably durable, it withstands high thermal environments up to 400°F and can be cleanly removed with a hairdryer without leaving a trace of residue or damaging your delicate furniture finishes.

Cabinet door precision alignment guide, to easily mount knobs and pulls to your cabinets with precision. Features a cluster of knob hole placements, and center-to-center hole template for the following: 3" (both low and high placement), 3-1/2", 96mm (3-3/4"), & 4". A 3/16" drill bit is recommended for drilling final mounting holes for your hardware.

Easy to use and a "god-send" for my project, allowing for a very professional installation of cabinet hardware. So glad I came across this on Wayfair!. Helen. San Antonio, TX. Wed Sep 25 2024

These shelf pegs are constructed of plastic and come in a clear finish for increased concealment. They are designed to receive 3/4 inch thick shelves and can support a maximum of 5 pounds each, per peg. The main feature of these shelf pegs is the self-locking tabs that secure the 3/4 inch thick shelves in place, preventing tipping and rotating of shelves. The 1/4 inch outside diameter pegs have a 5/16 inch depth and feature serrated stems for a stronger grip. See Prime-Line parts U 10181 for 5/8 inch thick shelves, and U 11301 for 3/8 inch thick shelves (w/5mm outside diameter peg). Adjustment Tip: To remove and relocate these support pegs, the tabs which lock in the shelves must be pushed in and held in while twisting the shelf upward in a clockwise direction if lifting the shelf from the left side. If shelf will be lifted upward starting from the right side, push and hold in the locking tabs of the support pegs (on the right) while twisting the shelf upward in a counter-clockwise direction from the right side. To accomplish this task a third or fourth hand may be required. Another option would be to slide in a couple of old credit cards or business cards in between the shelf's edge and the locking tab of the support pegs... this may assist causing the locking tabs to be pressed in by the cards when pushing up on one side of the shelf. Make sure the cards to be used are no longer needed as it is possible they will scratch and no longer be useful. Once the shelf is removed from its supports, the supports can be pulled out from the cabinet and relocated to desired height.

These are 5 mm. pin, clear plastic locking shelf pegs. Constructed from mold injected clear plastic. They feature self-locking tabs to prevent tilt-up on 5/8 thick shelves and keeping them secure in place. The pegs fit into 5 mm. holes in bookshelves or cabinets in your home or office. Each package contains 4 shelf support pegs. To install simply push the pin in the hole and gently place the 5/8 in. shelf in the locking area, to remove press the locking piece of plastic in to lift your shelf up.

This is a is a Mini style plastic shelf support peg. 1/4 in. diameter peg. Used by a variety of furniture manufacturers to support shelves within cabinets. Each peg has a 5 lb. maximum safe load.

These Shelf Support Pegs by Prime-Line Products are constructed from heavy-duty plastic and come clear in color. These types of shelf support pegs are commonly used in bookcases, stereo, and storage cabinets to support adjustable glass and wood shelving at up to 25 lbs. per support peg. These shelf support pegs feature a 1/4 in. peg diameter and they are easy to install. Use pliers to remove any stubborn/stuck pegs. Avoid using levels where the hole's diameter has been widened.

This is a Mini style plastic shelf support 5 mm. diameter peg. Often used in stereo and display cabinets by various furniture manufacturers. Each peg has a 5 lb. maximum safe load.

This is a plastic shelf support peg with a 5 mm. diameter steel peg. Provides extra strength where needed. Used by a variety of cabinet manufacturers. Each peg has a 15 lb. maximum safe load.

This 10 lb., 3 mm. clear plastic shelf pegs are commonly used to provide support for cabinet shelves. Each peg has a 10 lb. maximum safe load.

This is a shelf support peg with a 1/4 in. diameter. Comes in clear plastic construction. Typically you will find these used by a variety of cabinet manufacturers as well as bookshelf manufacturers. Each peg has a 5 lb. maximum safe load capacity. There are 8 shelf pegs per package and they are simple to install, just push them into the hole in your cabinet or bookshelf.

I got these shelf support pegs because a few of the ones that I already had needed to be replaced. They fit right into the holes. They appear to be stronger than the ones that were already there, so I’m hoping they will last longer.. Donald. NC. Tue Mar 25 2025

These shelf pegs are constructed of plastic and come in a clear finish for increased concealment. They are designed to receive 1/2 inch thick shelves and can support a maximum of 5 pounds each, per peg. The main feature of these shelf pegs is the self-locking tabs that secure the 1/2 inch thick shelves in place, preventing tipping and rotating of shelves. The 1/4 inch outside diameter pegs have a 5/16 inch depth and feature serrated stems for a stronger grip. Adjustment Tip: To remove and relocate these support pegs, the tabs which lock in the shelves must be pushed in and held in while twisting the shelf upward in a clockwise direction if lifting the shelf from the left side. If shelf will be lifted upward starting from the right side, push and hold in the locking tabs of the support pegs (on the right) while twisting the shelf upward in a counter-clockwise direction from the right side. To accomplish this task a third or fourth hand may be required. Another option would be to slide in a couple of old credit cards or business cards in between the shelf's edge and the locking tab of the support pegs. This may assist causing the locking tabs to be pressed in by the cards when pushing up on one side of the shelf. Make sure the cards to be used are no longer needed as it is possible they will scratch and no longer be useful. Once the shelf is removed from its supports, the supports can be pulled out from the cabinet and relocated to desired height.

These are shelf pegs. They are designed to support shelves in cabinets and bookshelves. Each shelf peg is constructed of mold injected clear plastic. To install push the 5 mm. outside diameter peg into the cabinet or bookshelf hole. Each peg has a 1/4 in. depth and they can support a maximum safe load of 5 lbs. each, per peg. Each package contains 8 shelf pegs. To remove simply take the shelf off the pegs and pull from the shelf peg hole.

Just what I needed.. Vanita. Gulfport, MS. Fri May 15 2026

This is a acrylic mirror retainer clip. thick glass mirrors with a ribbed universal design. Includes screws and anchors for mounting.

This was what I needed to secure my mirror.. Frances Bullock. Tue Aug 19 2025

These Shelf Support Pegs by Prime-Line Products are constructed of plastic and come clear in color. They feature grooved pegs for increased holding strength, while remaining easy to insert/install. Support pegs like these are commonly used by furniture manufacturers to support lightweight glass and shelving made of composite materials. The grooved pegs of these shelf supports have a 1/4 inch diameter and stretch 3/8 inches deep. Removal of broken pegs will be necessary prior to installing new.

Michael. Bowie, MD. Mon Jul 07 2025

This 13/16 in diameter roller features a 3-3/8 in. high bracket. Roller is a 5/16 in. in width. It mounts on the left side of your drawer when viewed from the rear. Contains 2 rollers and includes fasteners for a quick and easy installation.

Protect durable hard floor surfaces such as linoleum, laminate or ceramic tile floors from marring and scratches and carpet from denting and damage with SoftTouch smooth vinyl furniture caster cups. Not only will these furniture caster cups protect your beautiful flooring but their cupped design will keep caster wheels from rolling or furniture legs securely on the cup with no installation required. These long-lasting, heavy duty furniture caster cups are made of durable vinyl with a smooth bottom that will slide easily and damage free across your surfaces. Use the caster cups on tables, sofas, chairs, curio cabinets, desks and much more. Each pack includes 4- 1-13/16" furniture protector- they are an essential purchase for every household

These rubber cabinet door bumpers are made with clear and transparent glass cement material that instantly provides good cushioning, spacing, and stability when installed.

Great.. Doris. NC. Sun May 31 2026

Cabinet hero slimline door protector is a very low-profile guard that clips onto the top edge of a door or drawer to protect against the guard from nicks, chipping, peeling, and water drips. It can also click on the side and bottom of a door/drawer to protect it from nicks. The slimline fits flat top, 0.75" thick doors, and drawer fronts even on tight-fit euro-style & inset cabinets. Come in 18", 24", and 36" lengths - can be cut to fit smaller doors/drawer fronts. Children and pets are safe.

Easy to slip on over the top of the cabinet drawer and not very noticeable at all. I like that it protects the cabinet. We’re definitely order again.. Anonymous. US. Wed Dec 31 2025

Overall Size: 1" x 1 1/4"; 90 Degree Corner. They are intended for use with 3/16" (5 mm) glass or mirror panels.

Package content: 50 pack Shelf Supporter 5mm Clear Shelf Pins are used to support a shelf in place on any project with 5mm shelf holes.

Deborah. Davenport, IA. Wed Oct 30 2024

Package content: 100 pack Shelf Supporter 5mm Clear Shelf Pins are used to support a shelf in place on any project with 5mm shelf holes.

These fit perfect in my walk-in closet that was built by the previous owner of my house.. Laura. Fenton Mo. Tue Jan 10 2023