Nickel Cabinet & Drawer Hardware

This Sugatsune single arm with damper is an accessory/replacement part for the X600 series lateral opening door hinge, adding the soft-close damping action. It's rated for doors up to 52.91 lb. (24 kg), 21.65 to 25.59 in. (550-650 mm) wide, and 23.62 to 94.49 in. (600-2400 mm) tall, with a door thickness of 0.59 to 0.94 in. (15-24 mm). It's made from steel and aluminum with a nickel/anodized finish, measures 2.17 in. (55 mm) high and 13.39 in. (340 mm) wide with a 3.07 in. (78 mm) depth, and weighs about 2.28 lb. per piece. It mounts with 3.5 x 15 mm self-tapping screws. Certified to RoHS 3.

These shelf support pegs are constructed from heavy-duty steel and come plated in a bright nickel finish. They are designed to fit into 5 mm. (3/16 in.) diameter holes, making them perfect for most metrically sized imported cabinets and bookshelves. Each peg has a 25 lb. maximum safe load. Can be used for many heavier-duty applications such as in furniture with glass shelves. Shelf support pegs are easy to install and are used by a variety of manufacturers.

Does what I needed it to. Jessica. Fri Aug 23 2024

These shelf support pegs are constructed from steel and come finished in a nickel plated color. They are designed to attach to Knape & Vogt 255 & 233 Pilaster standards. Each peg has a 20 lb. maximum safe load capacity. Can be used in a variety of applications. Shelf support pegs are easy to install and are used by a variety of manufacturers.

Just what I ordered. Barbara. Newark De. Fri May 01 2026

This Sugatsune mechanism swings a cabinet door forward and down to open, with a soft close on the way back up, for doors weighing 8.8-11.0 lb. It's made from steel and plastic with a nickel/gray finish, measures 13.94 in. (354 mm) high, 6.99 in. (177.5 mm) long, and 0.93 in. (23.5 mm) wide, and fits doors from 14.17 to 15.75 in. (360-400 mm) tall and 23.62 to 35.43 in. (600-900 mm) wide. It weighs about 7 lb. per set, mounts with 3.5 x 15 mm self-tapping screws, and operates between 41 and 95 F (5-35 C). Certified to RoHS 3.

This is the aluminum bar for the Sugatsune SLU-ELAN sliding door system, finished in nickel. It measures 55.35 in. (1406 mm) long with a 0.87 in. (22 mm) section, and is ordered to suit the door opening it runs. Supplied as a bar only. It is certified to RoHS 3. Weighs about 1.2 lb. per piece.

These Prime-Line U 10169 Steel Shelf Support Pegs make sure your shelves stay in place, with a 20 pound maximum safe load per peg. Constructed of steel, the shelving pegs come with a plated finish and are strong and durable. These shelving support pegs are easy to install and used in many shelf support applications. Each shelving peg has a 1/4 inch diameter with 5/32 inch screw mounting hole. For further dimensional information, please see the line drawing.

Nice to have extras in case the others fall out and get lost . Toni. Oldsmar, FL. Wed May 06 2026

Item not match original but still able to use 2 for wider framed cupboards. Have ordered correct design since.. Anonymous. Manitoba, MB. Thu Aug 17 2023

These are really cool. They are not substantial in weight but I think well do the job just fine. Last name starts with S so it made these even cooler to me. Michelle. Malaga, NJ. Fri Feb 02 2024

This product that I purchased was SO disappointing. It was absolutely garbage. The quality was like something from the hardware store for $2.99. The finish was coming off in the package. It cost me $20 to send it back. I will hesitate to purchase from wayfair again. Paula. Kingston, ON. Wed Apr 03 2024

High quality. Anonymous. Fri Feb 28 2025

Anonymous. Sun May 05 2024

supplies this Sugatsune Aluminum made of aluminum in a nickel finish. WARNING: This product can expose you to nickel, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to www.P65WARNINGs.ca.gov.

supplies this Sugatsune Ultra Thin Magnetic Catch With Strike Plate - MC-YN001P made of steel in a nickel finish. Manufactured in Japan. Unique ultra thin magnetic catch design ideal for tight spaces Counterplate included Strong magnetic force Max. Temperature: 80C (176F)

Double Roller Catch with two wheels. Solid metal construction allows for long lasting durability. Each piece is manufactured with extra care to ensure a lasting product.

These are really cool. They are not substantial in weight but I think well do the job just fine. Last name starts with S so it made these even cooler to me. Michelle. Malaga, NJ. Fri Feb 02 2024