Brass Cabinet & Drawer Hardware

These shelf support pegs from Prime-Line are constructed from heavy-duty steel and come plated in a brass plated finish. They are designed to fit into 7mm (9/32 in.) diameter holes, making them perfect for most metrically sized imported cabinets and bookshelves. These pegs feature a 25-pound (per peg) maximum safe load capacity and can be used for many heavier-duty applications such as in furniture with glass shelves. These shelf support pegs are easy to install and are used by many manufacturers.

This drawer and cabinet lock is constructed of a diecast cylinder and stamped steel mounting plate. The lock comes in a brass-plated finish and it fits up to a 7/8 in. thick panel. The lock cylinder uses a Chicago keyway, ILCO (1041T) and it comes complete with two keys, a keeper and installation fasteners. Can be used on both cabinet doors and drawers. Not available keyed alike.

Absolutely beautiful lock that fit the missing one in a favorite old desk perfectly, but the keys were very poor quality. Not brass as shown, but some kind of pot metal that appeared to be punched, not cut. Edges were very rough and I had to have them smoothed.. Anonymous. Wed Mar 26 2025

This is a cabinet door pull handle. It comes with a chrome-plated finish and mounting holes 3 in. on the center. Used by a variety of RV and cabinet manufacturers. Screws are included for easy installation.

These cabinet knob backplates are constructed of stamped steel and come in a polished brass plated finish. Backplates like these are used on both cabinet doors and drawer faces to prevent the wearing of finished wood, and the unsightly accumulation of dirt and grime. They feature a large 2-13/16 in. outside diameter and they project outward a total of 3/16 in. These cabinet knob backplates do not include any installation fasteners, but they come with pre-punched holes for quick and easy installation.

This fine architectural wire mesh creates an all-purpose weave that will accommodate any application. Improve or create kitchen cabinets, hutches, curios and other furniture or project. Our selection of brass wire meshes and grilles will give a look of distinction to your kitchen or bar cabinets. These architectural meshes have a beautiful satin brass finish like no other.

Attached to doors of black bookcases for immediate striking upgrade.. Izabela. Greenwich, CT. Sat Apr 26 2025

This cabinet door elbow catch by prime line products is constructed of cast zinc and it comes in a beautiful corrosion-resistant, cast aluminum finish. Typically it is used to keep cabinet doors and drawers from being easily opened. It is designed with a spring-loaded latch that will automatically latch when installed properly. All necessary mounting hardware is included for a quick and easy installation. For best results, follow the installation instructions included with each package.

These Prime-Line U 10170 Steel Shelf Support Pegs make sure your shelves stay in place, with a 20 pound maximum safe load per peg. Constructed of steel, the shelving pegs come with a polished brass finish and are strong and durable. These shelving support pegs are easy to install and used in many shelf support applications. Each shelving peg has a 5mm diameter with 5/32 inch screw mounting hole. For further dimensional information, please see the line drawing.

Secure your closet or cabinet doors with this durable magnetic catch. This single magnet catch measures 2 inches by 1 inch with a total projection of 1/2 inches when fully installed. This hardware also features a center-to-center distance of 1-5/8 inches between the two screw slots. All of the necessary mounting hardware is included for a hassle-free installation. Stone Harbor Hardware products are manufactured with durable materials to create a long-lasting and high-quality product that matches other Stone Harbor Hardware items of the same finish. Check out the rest of Stone Harbor Hardware’s items to explore more hardware solutions for your home.

It is constructed of cast zinc and it comes in a beautiful corrosion-resistant, bright brass-plated finish. Typically it is used to keep cabinet doors and drawers from being easily opened. It is designed with a spring-loaded latch that will automatically latch when installed properly. All necessary mounting hardware is included for a quick and easy installation. For best results, follow the installation instructions included with each package.

These Prime-Line U 10168 Steel Shelf Support Pegs make sure your shelves stay in place, with a 20 pound maximum safe load per peg. Constructed of steel, the shelving pegs come with a polished brass finish and are strong and durable. These shelving support pegs are easy to install and used in many shelf support applications. Each shelving peg has a 1/4 inch diameter with 5/32 inch screw mounting hole. For further dimensional information, please see the line drawing.

Dimensions: 7/8" Projection; 1 1/2" Threaded Bolt.

Perfect - great fit. Anonymous. NY. Thu Jul 14 2022

This Drawer and Cabinet Lock by Prime-Line Products is constructed of diecast and steel components and it comes in a brass plated finish. This lock features a 7/8 in. outside cylinder diameter with a 5/16 in. bolt throw, and a 7/8 in. cylinder length that will accommodate up to 7/8 in. thick panels. This drawer and cabinet lock can be mounted to metal or wood; door and drawer panels, and it comes complete with installation fasteners. This model number is keyed different, but is also available keyed alike, and it uses Ilco Y-13 keyway.

Deltana Solid Brass cabinet finials are designed to fit Deltana cabinet hinges. They are available in a number of fine finishes.

Does the job!. Retreat At Running Springs. Lake Tenkiller, Oklahoma. Mon Nov 14 2022

Perfect for my vintage dresser. Margaret. Aiken, SC. Mon Aug 01 2022

This drawer and cabinet lock makes it easy to secure your drawers, important files and small items. It is constructed of diecast and steel components with a brass finish, and features a 3/4 inch outside cylinder diameter with a 5/8 inch length that will accommodate up to 5/16 inch thick panels. It’s durable, strong and installation is simple and easy. This drawer and cabinet lock can be mounted to metal or wood, door and/or drawer panels. It comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys and fasteners. The lock is keyed different with a Yale Y-11 keyway.

perfect!!. Colby. Mon Aug 28 2023

This Drawer and Cabinet Lock by Prime-Line Products is constructed of diecast and steel components and it comes in a brass plated finish. This lock features a 7/8 in. outside cylinder diameter with a 5/16 in. bolt throw, and a 7/8 in. cylinder length that will accommodate up to 7/8 in. thick panels. This drawer and cabinet lock can be mounted to metal or wood; door and drawer panels, and it comes complete with installation fasteners. This model number is keyed different, but is also available keyed alike, and it uses Ilco Y-13 keyway.

This cabinet and drawer lock by Prime-Line products is constructed of diecast and stamped steel materials, and it comes in a beautiful corrosion-resistant, brass-plated finish. This lock features a spring-loaded, self-latching design, and it fits up to 1 in. thick panels. Use this lock on cabinet doors and drawers where safe storage of items is desired. These cabinet and door locks are excellent for keeping important or dangerous items out of the reach and access of little hands. Not available keyed alike.

This drawer and cabinet lock makes it easy to secure your drawers, important files, and small items. It is constructed of diecast and steel components with a brass finish and features a 3/4 in. outside cylinder diameter with a 1-1/8 in. length that will accommodate up to 13/16 in. thick panels. It is durable and strong and installation is simple and easy. This drawer and cabinet lock can be mounted to metal or wood, door and/or drawer panels. It comes complete with 3 cams, a trim collar, 2 reversible rotation washers, 2 keys, and fasteners. The lock is keyed differently from a Yale Y-11 keyway.

A precious bar made from solid brass and designed to keep all your precious belongings safe. This precious bar consists of two vertical solid brass pulls and a solid brass horizontal fixing bar. The fixing bar features our signature linear-knurl pattern and is attached with an elegant brass fashion chain. The fixing bar can be secured in place with our solid brass padlock, with 'B+P' logo etched into it. They work great on cabinet doors, free-standing furniture, console units and just about anything that has two side-by-side openable doors.

Looks awesome. Is a total head turner.. Jason. Fri Apr 10 2026

Dimensions: 15" Long; The chain is adjustable.

These cabinet drawer pulls are constructed of diecast and come in a brass-plated finish. They feature a 3 in. hole center spacing and a wide base which allows for a sure grip. The opening and closing of drawers and cabinet doors are easy with these pulls. The sleek style of these drawer pulls makes them ideal for use on all cabinetry drawers and doors throughout the home and office. Each pull has a 3/4 in. reach and includes a pair of 1 in. fastener. These drawer pulls are sold in quantities of 5 pulls per bag, each individually packaged with 1 pull and 2 fasteners per bag, and they are used by many cabinet doors and drawer manufacturers.