Beige Vent Covers

For over two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom, every room in between your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your style, we’ll make every step of the process as seamless and worry-free as possible.

Works great!. Kelsey. Richmond, VA. Sat Jul 11 2026

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom—and every room in between—your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we’ll make every step of the process as seamless and worry-free as possible.

Excellent. Classic but modern. Good material. Tom. USA. Thu Jun 04 2026

A cold air return vent is usually much larger than a standard heating vent. They are normally wall-mounted and are positioned in line with the baseboard. They are typically made of oak, but species from the common to the exotic are also available. Handcrafted, and designed for wall applications, these returns provide an aesthetically pleasing look to any home. Precision-spaced louvers allow maximum airflow.

Perfect intake grate. Took stain really well!. Susan. Vancouver, BC. Sat Jun 13 2026

Give your room a high-end finishing touch with the Pasteur Brass Floor Register. Ideal for a space in need of a bold accent, this product features a geometric grille that will liven up any decor.

[This review was collected as part of a promotion.] These vent covers are just beautiful and very well made. Very sturdy, not cheap and flimsy at all!!. Melissah. Wed Apr 08 2020

Give your room a high-end finishing touch with the Pasteur Brass Floor Register. Ideal for a space in need of a bold accent, this product features a geometric grille that will liven up any decor.

Really solid vent cover. Much, much better than expected. Quality built and fit perfectly. Definitely worth the money.. Greg. Wed Jun 09 2021

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom and every room in between your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we'll make every step of the process as seamless and worry-free as possible.

What an amazing upgrade for so little money it makes the room finished. Kristin. Lone Tree, CO. Sun Sep 13 2026

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom and every room in between your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we'll make every step of the process as seamless and worry-free as possible.

This is a nice register and looks good with the tile. Bkk. Fri Sep 15 2023

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom and every room in between your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we'll make every step of the process as seamless and worry-free as possible.

Teri. Port Sanilac, MI. Tue Jul 21 2026

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom and every room in between your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we'll make every step of the process as seamless and worry-free as possible.

Featuring a modern geometric design, the Baer wall register is a sleek accent for your space. Made of steel and covered with a corrosion-resistant finish, this product is as durable as it is stylish. Adjustable louvers control the direction of airflow easily. Mounting clips are included for quick installation.

The first unit came with a small paint chip and dent, but we received a replacement for free. The design quality is satisfactory. I am considering doing all of the vents in the house with the same size this exact style.. Vlad. Thu Jul 30 2026

Cold air return vent is usually much larger than a standard heating vent. They are normally wall mounted and are positioned in line with the baseboard. They are typically made of oak, but species from the common to the exotic are also available. Handcrafted, designed for wall applications, these returns provide an aesthetically pleasing look to any home. Precision spaced louvers allow maximum airflow.

Very high quality...exactly what I needed to stain and match my existing woodwork.. Paul. Lutz, FL. Fri Sep 25 2026

2 Pack Value Set 4"×10" Floor Wall Air Vent Register, Adjustable Walkable Heavy Duty Steel Vent Covers, Anti-Rust Durable Floor Vent Grilles for Household Indoor Use

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom and every room in between your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we'll make every step of the process as seamless and worry-free as possible.

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom and every room in between your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we'll make every step of the process as seamless and worry-free as possible.

Anonymous. Fri Nov 29 2024

Imperial "Pop-Up" floor register can be used as a conventional floor register or as an air deflector when open. Perfect to blow air from under a couch or out away from the wall. Made of polystyrene plastic these registers can be easily cleaned and will never rust. These items can be used in the ceiling by simply by putting screws through the "knockout" at each end. Be sure when sizing your registers you measure the hole they are going into. These come in 2 sizes 4 x 10 hole size (5.25 x 11.25 overall) or 4 x 12 hole size (5.25 x 13.25 overall).

Am very happy with this item Just what I needed!. Eugenia. Dingmans Ferry, PA. Tue Apr 08 2025

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 steel countersink screws. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom and every room in between your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we'll make every step of the process as seamless and worry-free as possible.

To measure your size correctly, remove the existing vent cover and measure the size of the duct. The duct opening size is what should be ordered. The Ribbon grille is a resin (polyurethane) decorative vent cover that is light in weight yet sturdy and strong. Grilles are unfinished and ready for you to primer and paint to achieve the perfect color for your setting. Each grille is made using a casting process that allows for a three-dimensional look. Grilles will not rust and are not prone to corrosion which makes them excellent for high-humidity areas and dry areas alike. Ribbon grilles are flat on the back and have no inserts. Grilles should not be used on the floor and are only for wall and ceiling applications for central air conditioning and heating systems. Due to the nature of the curing process, grilles can vary very slightly in size so please take the measurements as an approximate size. All grilles should be installed using the provided screws to ensure a safe application. Please note, that these grilles are intended to be primed/painted and will come in an off-white beige color.

Pefect for painting and worked perfectly. Brittany. Midlothian, VA. Sat Jul 18 2026

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a duct opening will have an overall vent size of approximately, allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

Give your room a high-end finishing touch with the Pasteur Brass Floor Register. Ideal for a space in need of a bold accent, this product features a geometric grille that will liven up any decor.

beautiful finish. Jamie. Naperville, IL. Mon Feb 03 2025

Add natural beauty to any interior or exterior project with distinct western red cedar or Douglas fir. Rustic wood brackets, corbels, rafter tails, and outlooks will contain unique colors, grains, textures, knots, sapwood & heartwood content, and possible sap bleeding, and even natural checking, splitting & natural cracks. These variations are what make the Rustic Collection stand out from the rest. Stand out from the cookie-cutter homes; by using any product from Ekena's Rustic Collection.

very well made but heavy. Also there are no mounting instructions or hardware.. Terri. Leesburg, VA. Wed Apr 06 2022

The SteelCrest Distinction: This beautiful designer fixed return grille is made from solid, white powder-coated, rust-resistant galvanized steel and is designed for timeless beauty and unparalleled efficiency for your heating and cooling system.

I ordered a number of these and I really like them. We painted them the same color as the ceiling and they take the paint well. They make the room look so much nicer than the standard type of register.. Anonymous. CA. Mon Mar 10 2025

The steel crest distinction: this beautiful designer fixed return grille is made from solid, white powder-coated, rust-resistant galvanized steel and is designed for timeless beauty and unparalleled efficiency for your heating and cooling system.

Love the design and quality of these registers. They are well made with a heavy material and even finish. Purchased these for my 125year old home and they look great with the overall character and charm of the home!. Bethany. Knoxville, IL. Sun Mar 14 2021

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 steel countersink screws. Decorative screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom and every room in between your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we'll make every step of the process as seamless and worry-free as possible.

Marlee. Shepherd, MT. Mon Mar 10 2025

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, invincible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

This product offers the authentic appearance of a real wood product, without the maintenance that can come with wood. Available in a variety of realistic wood textures, these gable vents can create both a decorative accent and allow nominal airflow. Ready-to-paint or gel stain, they are available in a diverse range of shapes, sizes, and faux wood textures. Add a decorative touch to your gable, with one of our easy-to-install faux wood gable vents!

Just what I was looking for!. Ingrid. Saratoga, CA. Mon Jun 16 2025

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 steel countersink screws. Decorative screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 steel countersink screws. Decorative may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 steel countersink screws. Decorative may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

The AG Dryer vent cover is made of aluminum with louvers and is popular with luxury residential buildings.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a duct opening will have an overall vent size of approximately, allowing a border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

Faux wood gable vents offer the authentic appearance of a real wood product, without the maintenance that can come with wood. These gable vents can create both a decorative accent and allow nominal airflow. Ready-to-paint or gel stain. Add a decorative touch to your gable, with one of our easy-to-install faux wood gable vents!

I only needed to create faux air flutes and these did just that! Cut them to size, painted and voila!. Lidia. Mississauga, ON. Thu Jul 30 2026

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

The SteelCrest Distinction: This beautiful designer hinged filter return grille is made from solid, oil rubbed bronze powder coated, rust-resistant, galvanized steel and is designed for timeless beauty and un-paralleled efficiency for your heating and cooling system.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

Faux wood gable vents offer the authentic appearance of a real wood product, without the maintenance that can come with wood. Available in a variety of realistic wood textures, these gable vents can create both a decorative accent and allow nominal airflow. Ready-to-paint or gel stain. Add a decorative touch to your gable, with one of our easy-to-install faux wood gable vents!

We were elated to finally find a round top gable vent with the dimensions that we needed! This product was exceptional in appearance, paintable, affordability and easy to install. Great product and happy customers!. Kristina M. Tue Jul 22 2025

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a duct opening will have an overall vent size of approximately , allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.