Tile Grout & Mortar

The Armor SX5000 WB is a PRO-Grade water-based penetrating water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

I’ve got a fairly long and steep concrete driveway that is starting to show its age a little bit. There has been some minor cracking from the freeze-thaw cycle each winter. I decided to try the Armour SX5000 water-based sealant to see if it would improve the situation. I have delayed writing this review for a bit as I wanted to driveway to go through at least one winter season. I first pressure washed the entire driveway surface which is pretty time consuming. I then applied the Armour sealant with a manual pump sprayer. This part went fairly quickly. The trick is to get the sealant covering the driveway well, but not so much as to create puddles that aren’t absorbed. I made sure there was no rain in the forecast for a couple of days. Initially, I did half of the driveway first and the first day that it rained the difference on the two sides was very noticeable. Water on the coated side was beading and running off and on the other side it was being absorbed into the concrete. My driveway has now gone through two winters and the sealant is still somewhat effective, but I think I will need to coat it again this fall.. Bryan. Halifax, NS. Fri Mar 27 2026

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption, including cracking, spalling, pitting, dusting, mold, mildew, and algae growth.

Good sealer for concrete driveway. Robert. Butte, MT. Thu Apr 02 2026

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a high gloss wet look finish.The Armor AR500 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Fantastic sealer. Anonymous. Thu Apr 16 2026

Our Starlike EVO Classic Collection Epoxy Tile Grout allows you to achieve a flawless, high-performance tile installation with ease. This advanced two-part epoxy grout also works as a Class R2T adhesive, so you can rely on strong vertical grip and excellent bonding strength. Whether you're upgrading your bathroom, designing a kitchen backsplash, installing tile in a pool area, or tackling a sauna project, you’ll get reliable, long-lasting results indoors or outdoors. The smooth consistency and easy cleanup make your home improvement work faster and more efficient, whether you're a DIYer or a seasoned professional. Enjoy rich, stable color that stays true and won’t bleed onto your tile surfaces. It works beautifully with porcelain, natural stone, glass mosaics, metallic tiles, and more. No matter the surface or room, you’ll be able to grout joint widths from 1 mm to 15 mm with ease. Your finished surface will be crack-resistant, waterproof, stain-resistant, and strong enough to handle high-moisture, high-traffic areas. You won’t have to worry about chemical damage or discoloration, even in swimming pools, saunas, or Turkish baths. With a working time of about one hour and walkable surfaces in just 24 hours, you’ll keep your project on schedule without sacrificing quality. You can count on Starlike EVO Classic Collection Epoxy Tile Grout for a professional-grade finish that’s safe to use, low in VOCs, and non-corrosive.

Works very well, just a little difficult to clean up tools and such if you're working solo and trying to beat the clock on installing the grout and cleaning up.. Anonymous. Washington. Sat May 30 2026

Our NEW Starlike EVO grout is a Two-component, acid-resistant epoxy grout for laying and grouting all types of tiles and mosaics with joints 1mm (3/64) to 15 mm (19/32) in. width. World's leading high-performance and high-fashion grouting material. This Litokol Epoxy grout is extremely easy to install and maintain. Can also be used as an adhesive. We also offer several The Tile Doctor Shimmer / Glitter additives that you can add to any of our colors. Product with ultra-low volatile organic compound (VOC) emissions. When applying grout to the tile we recommend using The Tile Doctor Epoxy Float. This float is specially designed to spread grout into joints when grouting tile with epoxy-based grout.

Great color match for what I needed. Zarinah. Los Angeles, CA. Wed Jun 03 2026

The Armor SX5000 is a PRO-Grade solvent-based Silane Siloxane water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Great product for protecting concrete. Be careful with how you want to apply this product. I used a plastic container and sprayer, and this sealer literally melted the plastic/ spraying wand. I had to buy stailess steel sprayer to apply this sealer. Also, use a very good quality gloves to avoid any skin rash. It would be great if the supplier supplied MSDS sheet and warning label to not to use any plastic sprayer. Product is excellent, easy to apply! I hope it will keep my concrete in great condition for next 3-4 years.. Junaid. Edmonton, AB. Mon Sep 15 2025

This is a hand caulking guns. Rotating and ergonomic handle enables you to efficiently get around corners easily to meet the needs of different working angles. It is perfect for re-pointing walls, filling gaps between slabs and re-pointing walls and grouting floor and wall tiles.

So far it works great. I have a lot more to do so I hope it hold up. I am sure it will. Patti. Trail, BC. Mon Jun 15 2026

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Amazing coverage for our aggregate sidewalk. The sealer not only lives up to harsh winters here in the North, but is amazingly beautiful in the summer! This is the only product we will buy for our concrete need.. Johna. Pittsburgh, PA. Mon Sep 11 2023

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

very happy with the price for the product was kept well inform about were was the product at certain time and it was well package. Richard. Brampton, ON. Fri Jul 24 2026

Ultimate nano floor finishes with nanoformulation technology - a medium sheen penetrating topical. A protective nano-thin coating that creates a durable, crystal clear finish specifically designed to bond to the micro-pores of today’s porcelain tiles, LVT, and more. This new AC technology has the easiest, safest, and fastest application in the industry, is self-leveling, and protects against spills and stains. It also enhances the beauty of any porcelain, ceramic, and LVT tile colors and patterns while leaving a desirable medium sheen finish. This will also seal the grout joints and make for easy, fast, and effortless maintenance of the floor.

This is amazing. I used it to install vinyl tile and it make the job so much easier. Simple to use and extremely affective. I highly recommend this for any job you have with vinyl flooring.. Cecelia. Watertown, NY. Fri Jun 12 2026

The Armor AX25 combines two great products into one! With the AX25, you get a penetrating water repellent sealer, and a high gloss acrylic coating - all packed into one amazing product!The Armor AX25 is a solvent-based siloxane-infused acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AX25 is a fantastic sealer if you are looking to bring out dull and faded surfaces, enhance surfaces with a high gloss wet look finish, and provide superior water repellency benefits to the surface. The Armor AX25 also doubles as a cure and seal and can be applied to new concrete.The Armor AX25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Bought AX-25 to reseal my pool deck and lanai. This stamped concrete deck has to be resealed every 2-3 years. Used tint from another company (very good stuff). However, I decide to give Foundation Armor a try for sealing. I am very pleased and find this to give a better appearance than the sealant I used before from the tint provider. Gloss seems much brighter and just seemed to go down easier. Of course it will a year or two before I know for sure, but so far it looks great.. Rosetejas. Se Texas. Wed Jul 12 2023

The Armor S2000 is a ready-to-use sodium silicate densifier designed to increase the strength and reduce the porosity of poured concrete surfaces. It penetrates deep into the substrate where it chemically reacts to form a calcium silicate hydrate barrier within the pores that reduces and increases the strength and density of the concrete by up to 45%. It will help to reduce concrete dusting and reduce the movement of subsurface water and moisture through the concrete. The Armor S2000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete surfaces. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film.

perfect. Keith. Sun Oct 30 2022

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor AR500 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Seals great and gives the surface a nice shine!. Bobbi. Evans City, PA. Mon Jun 15 2026

The Armor SC25 is a fast-acting cost-effective penetrating water repellent sealer specifically formulated for white, or very light unsealed concrete surfaces. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SC25 is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed white and very light concrete. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Love it. Stef Newman. Clifton, TX. Mon Jun 07 2021

The Armor WL550 is a penetrating, matte wet look water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption. It will darken the surface to slightly enhance any dull and faded coloring. The Armor WL550 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and masonry. It works entirely below the surface and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Worked well and water beads on marble lanai and pool deck pavers. It is not matte but more of a low gloss that I expect to dull from the sun.. Mark. Sw Florida. Thu Mar 14 2024

Epoxy Elite EVO Acid-resistant 2-part epoxy mortar for the installation and grouting of ceramic tiles and mosaics with 1/32” to 5/8” (1 to 15 mm) joints. For virtually all areas of application, indoor and outdoor floors and walls, also rated for pool and steam environments. Product with ultra-low emission of volatile organic substances (VOC) the ZHERORISK formulations provides an innovation which are safer for the installer, the jobsite and have no transportation or environmental negatives like all of the other epoxy grouting products. Innovative new approach to Epoxy Mortar that enables a smoother matt finish. Epoxy Elite EVO is a commercial product that can be used as a non-sag setting material and grouting product. Extremely easy to install and maintain (follow specific instructions for this product). 2-part anti-acid epoxy mortar. Part A consists of a mixture of epoxy resin, fine-grain siliceous aggregates, pigments and specific organic additives. Component B consists of an innovative organic catalyst. The 2 parts, once mixed together at room temperature will have a full 60 minutes of application and cleaning time, and forms a creamy mixture with excellent smoothness, also for no-drip vertical application. Once hardened, the product has ultra-high performance in terms of mechanical and chemical resistance. The grout is industrial grade performance even when subjected to enzymatic cleaners and other harsh environments. When applying grout to tile we recommend using The Tile Doctor Green Epoxy Float. This float is specially designed to spread grout into joints when grouting tile with epoxy-based grout.

The Armor SX5000 WB is a PRO-Grade water-based penetrating water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Satisfactory. Hedley. Thomaston, ME. Mon Jul 27 2026

Epoxy Elite EVO Acid-resistant 2-part epoxy mortar for the installation and grouting of ceramic tiles and mosaics with 1/32” to 5/8” (1 to 15 mm) joints. For virtually all areas of application, indoor and outdoor floors and walls, also rated for pool and steam environments. Product with ultra-low emission of volatile organic substances (VOC) the ZHERORISK formulations provides an innovation which are safer for the installer, the jobsite and have no transportation or environmental negatives like all of the other epoxy grouting products. Innovative new approach to Epoxy Mortar that enables a smoother matt finish. Epoxy Elite EVO is a commercial product that can be used as a non-sag setting material and grouting product. Extremely easy to install and maintain (follow specific instructions for this product). 2-part anti-acid epoxy mortar. Part A consists of a mixture of epoxy resin, fine-grain siliceous aggregates, pigments and specific organic additives. Component B consists of an innovative organic catalyst. The 2 parts, once mixed together at room temperature will have a full 60 minutes of application and cleaning time, and forms a creamy mixture with excellent smoothness, also for no-drip vertical application. Once hardened, the product has ultra-high performance in terms of mechanical and chemical resistance. The grout is industrial grade performance even when subjected to enzymatic cleaners and other harsh environments. When applying grout to tile we recommend using The Tile Doctor Green Epoxy Float. This float is specially designed to spread grout into joints when grouting tile with epoxy-based grout.

This product is the best. The absolute best ! Sure it's expensive but well worth it.. Monique. QC. Sun Dec 21 2025

Ultimate Porcelain Tile Sealer with Hybrid Formulation Technology is a VOC-compliant, easy-to-use, fast-curing sealer for all porcelain tiles. Use before grouting to protect the micro-pores of porcelain tiles from staining during the grouting process and to make the grout cleanup much easier and faster. Use after installation to help keep the tiles clean, easier to maintain, and looking like new for years to come. Easy wipe-on application!

Top. Sandy. Fresno, TX. Fri Mar 20 2026

1600 Unsanded Grout. A premium, factory prepared, polymer fortified unsanded portland cement grout designed to be mixed with water. Formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments. Provides a grout joint that is dense, hard and durable.

Great product!! I have used many, but I find this one to be the best!!. Dorothy. North Scituate, RI. Thu Aug 12 2021

Ultimate Granite Clean & Seal- New AC Technology allows for this unmatched performance of granite cleaner and sealer in-1!

Smells really good. Clean granite to a shine. Description match product.. Dionne. Scarborough, ON. Tue Mar 01 2022

PERMACOLOR® Grout is a high-performance, fast-setting polymer-fortified grout that provides a tile grout joint that is dense and hard. PERMACOLOR Grout is color-consistent and features built-in Microban® antimicrobial protection to keep the grout surface looking newer for longer. High-performance grout with Water Dispersion Technology™ for enhanced strength, stain resistance, and lasting results.

Anonymous. Thu Jul 02 2026

Laticrete Spectralock Grout Part C is a high-performance epoxy grout designed for demanding residential and commercial installations. Part of the renowned Laticrete Spectralock Grout Part C system, this grout offers superior strength, durability, and resistance to stains, making it ideal for use in high-traffic areas and wet environments. Its color consistency ensures a seamless finish, while its non-sag properties make it perfect for both wall and floor applications, including large-format tiles. Laticrete Spectralock Grout Part C features an advanced epoxy formula that resists mold, mildew, and staining, offering long-lasting protection and ease of maintenance. It is ideal for use in kitchens, bathrooms, pools, and other areas exposed to heavy moisture or cleaning. Whether you're installing tiles in a commercial or residential setting, Laticrete Spectralock Grout Part C provides the ultimate combination of performance and aesthetics.

Parfait. Stephane. Sat Oct 18 2025

Ultimate High Gloss Sealer- A high gloss topical protective coating that creates a durable, crystal clear finish on the slate, saltillo, concrete pavers, and more. This new AC Technology has the easiest, safest and fastest application in the industry, is self-leveling, and penetrates the substrate to protect against oil and water-based stains.

Definitely high gloss. Works well for my application.. Prue. Connecticut. Thu May 07 2026

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Excellent product. Used it to seal our curbing. Perfect color and added the wet look like it says. Anonymous. Thu Apr 30 2026

ARDEX TLT 700 is a one-component, high modulus, mildew resistant multi-purpose elastomeric hybrid adhesive and neutral curing sealant that hardens in reaction with moisture. ARDEX TLT 700 is extremely flexible with excellent bond strength, making it suitable for a wide range of applications. It is ideal for replacing tiles or for use as a general shower, kitchen and bathroom repair adhesive and sealant for fitting accessories such as soap holders. ARDEX TLT 700 is shrinkage free and can be used to fill movement joints. Use on interior or exterior walls and floors. ARDEX TLT 700 is ideal for bonding most construction materials, including glass, tiles, ceramics, wood, plastic and metal.

1500 Sanded Grout is formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments and provides a grout joint that is dense, hard and durable. For grout joint widths of 1/16" (1.5 mm) up to 3/8" (9 mm). 1500 Sanded Grout is a premium, factory prepared grout designed to be mixed with water. 1500 Sanded Grout is formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments and provides a grout joint that is dense, hard and durable.

PERMACOLOR® Grout is a high-performance, fast-setting polymer-fortified grout that provides a tile grout joint that is dense and hard. PERMACOLOR Grout is color-consistent and features built-in Microban® antimicrobial protection to keep the grout surface looking newer for longer. High-performance grout with Water Dispersion Technology™ for enhanced strength, stain resistance, and lasting results.

It ARRIVED A DAY LATE FROM SAID DAY OF DELIVERY, I NEEDED IT THE DAY BEFORE BUT I WAS ABLE TO GET THE JOB DONE, THE BAGS ARE WAY SMALLER THAN YOU THINK IT WOULD BE SO IF YOUR DOING A JOB DEFINITELY ORDER 1-2 BAGS EXTRA, I ORDER 1 BAG EXTRA AND I NEEDED IT TO FINISH THE JOB OTHERWISE ITS A GOOD PRODUCT, I HAD TO MATCH EXISTING PATIO SO I HAD TO USE THE SAME GROUT OTHERWISE I USE POWER-GROUT NOT CHEAP BUT IT LOOKS GREAT AND WILL LAST A LIFETIME IF DONE CORRECTLY,I GIVE 4 STARS FOR THE ONE DAY DELAY. George. Shirley, NY. Sun Jun 14 2026

TruColor RapidCure is a patented, water-based, premium grout offering the ultimate in color accuracy, water resistance, stain protection and crack protection. This breakthrough formulation installs up to 50 percent faster than traditional grouts, and never needs to be sealed. Its perfect balance of flexibility and toughness enables it to exhibit unmatched performance.

The Armor WB15 is a water-based acrylic sealer designed to seal and protect concrete and paver surfaces with a durable low gloss surface film. The Armor WB15 is a fantastic sealer if you are looking to enhance surfaces with a low gloss finish.The Armor WB15 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

The folks at Foundation Armor were very helpful in helping us find a low gloss sealer for our stamped concrete. We applied 2 coats and it came out looking great.. Anonymous. Pembroke New Hampshire. Sat May 06 2023

PERMACOLOR® Grout is a high-performance, fast-setting polymer-fortified grout that provides a tile grout joint that is dense and hard. PERMACOLOR Grout is color-consistent and features built-in Microban® antimicrobial protection to keep the grout surface looking newer for longer. High-performance grout with Water Dispersion Technology™ for enhanced strength, stain resistance, and lasting results.

Kate. Thu May 14 2026

Hydroment Vivid is a rapid curing, premium grade, stain resistant cementitious grout developed with the scientific breakthroughs of Bostik’s HyDrix and Color Suspension Technologies for demanding commercial and residential projects. It offers consistent color technology with enhanced stain and efflorescence protection.

Color: PARCHMENT Never before has a pre-mixed grout offered the superior strength and performance of an epoxy grout, now found in SPECTRALOCK® 1! This patented, professional grade grout offers all the benefits of SPECTRALOCK® epoxy grout without the hassle of mixing. It provides exceptional durability, extreme versatility, and excellent color consistency – even grouting in the most demanding applications. Providing exceptional versatility and excellent color consistency, SPECTRALOCK 1 is stainproof^ and available in a wide variety of colors to match any design. It exceeds ANSI A118.19 as well as meets or exceeds ANSI A118.3* specific test designation 5.6, of which no comparable product on the market can claim. No other grout currently offers the strength, quality and application opportunities in a true, pre-mixed grout.

The Armor LV25 is a solvent-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor LV25 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor LV25 also doubles as a cure and seal and can be applied to new concrete. The Armor LV25 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Awesome product 2 coates and protected. I used this in the summer to seal stucco on my chimney and it really is armor against water damage. Can I give the sealer 6 stars?. Duke Of Babes. Wed Nov 13 2024

Pure Silicone sealant is a specially formulated, neutral-cure, 100% silicone sealant for a variety of substrates such as ceramic tile, slate, wood, metal, glass, fiberglass, laminate and plastic. For use as a flexible barrier between horizontal and vertical surfaces or any other changes in plane such as expansion joints in non-traffic areas, fixtures, tub surrounds, sinks, toilets, vanities, electrical plumbing penetrations, floors, walls and ceilings. Pure Silicone is designed for use in interior, exterior, intermittent wet and dry installations. Pure Silicone has superior elongation and flexibility for use in change of plane joint applications.

PERMACOLOR® Grout is a high-performance, fast-setting polymer-fortified grout that provides a tile grout joint that is dense and hard. PERMACOLOR Grout is color-consistent and features built-in Microban® antimicrobial protection to keep the grout surface looking newer for longer. High-performance grout with Water Dispersion Technology™ for enhanced strength, stain resistance, and lasting results.

The Armor WL550 is a penetrating, matte wet look water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption. It will darken the surface to slightly enhance any dull and faded coloring. The Armor WL550 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Used this WL550 sealer on a powerwashed 20+ year old patio. This product did a good job reviving some color without the fake looking shine of sealers with glossy finishes. I wouldn't call it a 100% "wet look' when done -- would have preferred a little darker -- but given the age of the patio, the results were pretty good. I used about 2 1/3 gallons to cover 365 sq ft using a pump sprayer. Product had a strong odor, but it dissipated soon after the job. Haven't yet evaluated the sealing properties, but my main purpose was to improve the look.. Debra. Arlington Heights, IL. Sun Jun 02 2024

1500 Sanded Grout is formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments and provides a grout joint that is dense, hard and durable. For grout joint widths of 1/16" (1.5 mm) up to 3/8" (9 mm). 1500 Sanded Grout is a premium, factory prepared grout designed to be mixed with water. 1500 Sanded Grout is formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments and provides a grout joint that is dense, hard and durable.

General Finishes TransTint® dyes are premium, concentrated liquid colorants engineered to blend seamlessly with a wide variety of bases, giving woodworkers unmatched flexibility when creating stains and toners. Designed for exceptional grain clarity and rich, even color saturation, TransTint® delivers a depth and brilliance that traditional wood stains simply cannot match. Unlike standard stains, TransTint® dyes penetrate deeply, amplify natural grain patterns, and offer an expansive palette of vibrant hues that professionals rely on for everything from fine furniture and cabinetry to instruments and restoration work. TransTint® dyes are compatible with a wide range of mediums including water, alcohol, shellac, lacquer, and the following General Finishes products that help you achieve professional grade color results.

1500 Sanded Grout is formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments and provides a grout joint that is dense, hard and durable. For grout joint widths of 1/16" (1.5 mm) up to 3/8" (9 mm). 1500 Sanded Grout is a premium, factory prepared grout designed to be mixed with water. 1500 Sanded Grout is formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments and provides a grout joint that is dense, hard and durable.

PERMACOLOR® Grout is a high-performance, fast-setting polymer-fortified grout that provides a tile grout joint that is dense and hard. PERMACOLOR Grout is color-consistent and features built-in Microban® antimicrobial protection to keep the grout surface looking newer for longer. High-performance grout with Water Dispersion Technology™ for enhanced strength, stain resistance, and lasting results.

Pure Silicone sealant is a specially formulated, neutral-cure, 100% silicone sealant for a variety of substrates such as ceramic tile, slate, wood, metal, glass, fiberglass, laminate, and plastic. For use as a flexible barrier between horizontal and vertical surfaces or any other changes in the plane such as expansion joints in non-traffic areas, fixtures, tub surrounds, sinks, toilets, vanities, electrical plumbing penetrations, floors, walls, and ceilings. Pure Silicone is designed for use in interior, exterior, intermittent wet and dry installations. Pure Silicone has superior elongation and flexibility for use in the change of plane joint applications.

Fine. Anonymous. Sat Sep 23 2023

The Armor WB25 is a water-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will protect the surface with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete.The Armor WB25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great product. Ron. Niagara Falls, NY. Sat Jan 21 2023

Pure Silicone sealant is a specially formulated, neutral-cure, 100% silicone sealant for a variety of substrates such as ceramic tile, slate, wood, metal, glass, fiberglass, laminate and plastic. For use as a flexible barrier between horizontal and vertical surfaces or any other changes in plane such as expansion joints in non-traffic areas, fixtures, tub surrounds, sinks, toilets, vanities, electrical plumbing penetrations, floors, walls and ceilings. Pure Silicone is designed for use in interior, exterior, intermittent wet and dry installations. Pure Silicone has superior elongation and flexibility for use in change of plane joint applications.

General Finishes High Performance (HP) polyurethane is a unique finish that combines the best qualities of urethane and acrylic. This specialized blend makes it incredibly tough, durable, and water-resistant, making it ideal for high-wear surfaces like tables and cabinets. Unlike many water-based finishes, HP is formulated to resist common issues like foaming, sagging, and running. It also offers all the user-friendly benefits of a PolyAcrylic Blend, meaning it won't yellow and cleans up easily with water. Plus, it's enhanced with UV absorbers to protect the underlying stains, paints, and wood. HP is a fast-drying, low-odor, and non-flammable alternative to traditional lacquers, perfect for interior woodwork, furniture, and cabinets. With a quick 15-minute dry time and only 2-4 hours needed between coats, you can finish your projects quickly.

1600 Unsanded Grout. A premium, factory prepared, polymer fortified unsanded portland cement grout designed to be mixed with water. Formulated from a blend of high strength portland cement, graded aggregates, polymers and color-fast pigments. Provides a grout joint that is dense, hard and durable.

Color: TOSTED ALMOND Never before has a pre-mixed grout offered the superior strength and performance of an epoxy grout, now found in SPECTRALOCK® 1! This patented, professional grade grout offers all the benefits of SPECTRALOCK® epoxy grout without the hassle of mixing. It provides exceptional durability, extreme versatility, and excellent color consistency – even grouting in the most demanding applications. Providing exceptional versatility and excellent color consistency, SPECTRALOCK 1 is stainproof^ and available in a wide variety of colors to match any design. It exceeds ANSI A118.19 as well as meets or exceeds ANSI A118.3* specific test designation 5.6, of which no comparable product on the market can claim. No other grout currently offers the strength, quality and application opportunities in a true, pre-mixed grout.