8-9.99 Inch Vent Covers

𝐌𝐀𝐃𝐄𝐋𝐘𝐍 𝐂𝐀𝐑𝐓𝐄𝐑 𝐅𝐋𝐎𝐎𝐑 𝐑𝐄𝐆𝐈𝐒𝐓𝐄𝐑𝐒 𝐎𝐑 𝐖𝐀𝐋𝐋 𝐑𝐄𝐆𝐈𝐒𝐓𝐄𝐑 𝐕𝐄𝐍𝐓 𝐂𝐎𝐕𝐄𝐑: The Madelyn Carter Floor Registers or wall registers are a stylish and durable option for your home's air ventilation. This air vent cover is made from high-quality material, making it strong and long-lasting. These designs are perfect for modern homes, and the registers come in a variety of finishes and sizes to match your decor. They are easy to install and will fit most standard floor ducts. Upgrade your home's ventilation system with the Madelyn Carter Floor Registers. 𝐇𝐈𝐆𝐇-𝐐𝐔𝐀𝐋𝐈𝐓𝐘 𝐕𝐄𝐍𝐓 𝐂𝐎𝐕𝐄𝐑𝐒 𝐅𝐎𝐑 𝐖𝐀𝐋𝐋: Combining quality materials and innovative design, these heat vent covers complement modern, clean designs in any space. It includes sturdy adjustable dampers and a beautiful, long-lasting finish that lasts for years. Control your airflow and elevate your home with this register. 𝐒𝐏𝐄𝐂𝐈𝐅𝐈𝐂𝐀𝐓𝐈𝐎𝐍𝐒: • 𝐁𝐫𝐚𝐧𝐝: Madelyn Carter • 𝐈𝐭𝐞𝐦 𝐍𝐚𝐦𝐞: Wall Vent Covers • 𝐍𝐮𝐦𝐛𝐞𝐫 𝐨𝐟 𝐏𝐢𝐞𝐜𝐞𝐬: 1 • 𝐒𝐩𝐞𝐜𝐢𝐚𝐥 𝐅𝐞𝐚𝐭𝐮𝐫𝐞𝐬: Easy to Install 𝐒𝐓𝐑𝐎𝐍𝐆 𝐕𝐄𝐍𝐓 𝐂𝐎𝐕𝐄𝐑: Durability reigns supreme with Cast Brass, Cast Iron, Cast Aluminum, and Steel options, and the heavy-duty metal dampers, this floor register cover boasts strength and longevity. You can use this vent cover in high-traffic areas of your home or office without worrying about dents from furniture, or rust.

I can’t say enough about these vents. I had been looking and looking everywhere and could not find anything. As soon as I saw these, I knew that they were perfect for me. The quality is excellent. I opened the box and put it in and this is what I have. I ordered more so that every vent in my house is this. If I could explain in one word, I would say.”elegant’.. Donna. London, KY. Sun Apr 26 2026

Madelyn Carter floor registers or wall register vent cover: The Madelyn Carter floor registers or wall registers are a stylish and durable option for your home's air ventilation. This air vent cover is made from high-quality material, making it strong and long-lasting. These designs are perfect for modern homes, and the registers come in a variety of finishes and sizes to match your decor. They are easy to install and will fit most standard floor ducts. Upgrade your home's ventilation system with the Madelyn Carter floor registers. High-quality vent covers for the wall: Combining quality materials and innovative design, these heat vent covers complement modern, clean designs in any space. It includes sturdy adjustable dampers and a beautiful, long-lasting finish that lasts for years. Control your airflow and elevate your home with this register. Specifications: • Brand: Madelyn Carter • Item Name: wall vent covers • Number of pieces: 1 • Special Features: easy to install and replaceable Strong vent cover: Durability reigns supreme with cast brass, cast iron, cast aluminum, and steel options, and the heavy-duty metal dampers, this floor register cover boasts strength and longevity. You can use this vent cover in high-traffic areas of your home or office without worrying about dents from furniture, or rust.

My gorgeous bathroom- all Wayfair!. Kristen. Plover, WI. Sat Sep 05 2026

This Imperial floor register replaces supply air floor vent covers in residential and mobile home HVAC applications. It features an all steel heavy-duty construction with a rigid 4-mm top plate that is powder-coated cast iron for a rustic finish, enhancing surrounding interiors with a premium, grounded look. Built to resist everyday wear and corrosion, it is designed for long-term use in high-traffic areas such as living rooms, hallways, and kitchens. An integrated boot houses an easy-to-use damper for multi-directional airflow control from fully open to fully closed. The stamped steel Templar design enhances structural strength while promoting widespread air diffusion to improve comfort and system efficiency. The smooth surface is easy to clean, and installation is quick—simply drop it into the floor opening; no complex tools are required. Important: Size refers to the opening; actual unit is slightly larger for proper coverage. Measure opening before ordering.

The floor registers make my floors look so much better these are just what I was looking for.. Laura. Nevada City, CA. Fri Nov 04 2022

The SteelCrest Distinction: This beautiful designer fixed return grille is made from solid, white powder coated, rust-resistant galvanized steel and is designed for timeless beauty and un-paralleled efficiency for your heating and cooling system.

Looks great in my living room, fits perfectly as described. Mindy. Morgantown, WV. Mon Jul 08 2024

Madelyn Carter floor registers or wall register vent cover: The Madelyn Carter Floor Registers or wall registers are a stylish and durable option for your home's air ventilation. This air vent cover is made from high-quality material, making it strong and long-lasting. These designs are perfect for modern homes, and the registers come in a variety of finishes and sizes to match your decor. They are easy to install and will fit most standard floor ducts. Upgrade your home's ventilation system with the Madelyn Carter Floor Registers. High-quality vent covers for the wall: Combining quality materials and innovative design, these heat vent covers complement modern, clean designs in any space. It includes sturdy adjustable dampers and a beautiful, long-lasting finish that lasts for years. Control your airflow and elevate your home with this register. Specifications: • Brand: Madelyn Carter • Item Name: Wall Vent Covers • Number of Places: 1 • Special Features: Easy to Install and replaceable Strong ven cover: Durability reigns supreme with Cast Brass, Cast Iron, Cast Aluminum, and Steel options, and the heavy-duty metal dampers, this floor register cover boasts strength and longevity. You can use this vent cover in high-traffic areas of your home or office without worrying about dents from furniture, or rust.

Easy upgrade from the original cheap builder vent covers. The black goes with everything and elevates the look.. Lonnie. Newmarket, NH. Thu Sep 17 2026

Refresh a room by replacing existing registers with the oversized Old Victorian smooth cast iron floor register. Durable cast iron and a Victorian-inspired design make this a top choice for your home.

With a striking pattern of overlapping lines, the Wicker floor register lends a bold and stylish look to floors. Crafted of heavy-duty cast iron, this register conveniently includes louvers that may be removed, if desired.

They look great, but I had to send them back because they didn't fit.. Janet. Hailey, ID. Tue Apr 29 2025

Madelyn Carter Floor Registers or Wall Register Vent Cover: The Madelyn Carter Floor Registers, or wall registers, are a stylish and durable option for your home's air ventilation. This air vent cover is made from high-quality material, making it strong and long-lasting. These designs are perfect for modern homes, and the registers come in a variety of finishes and sizes to match your décor. They are easy to install and will fit most standard floor ducts. Upgrade your home's ventilation system with the Madelyn Carter Floor Registers. High-quality vent covers for the wall: Combining quality materials and innovative design, these heat vent covers complement modern, clean designs in any space. It includes sturdy, adjustable dampers and a beautiful, long-lasting finish that lasts for years. Control your airflow and elevate your home with this register. Strong vent cover: Durability reigns supreme. With cast brass, cast iron, cast aluminum, and steel options, and heavy-duty metal dampers, this floor register cover boasts strength and longevity. You can use this vent cover in high-traffic areas of your home or office without worrying about dents from furniture or rust.

Beautiful work of art, heavy and substantial. Anonymous. Mon Jun 15 2026

The SteelCrest Distinction: This beautiful designer supply vent is made from solid, white powder coated, rust-resistant galvanized steel and is designed for timeless beauty and un-paralleled efficiency for your heating and cooling system.

The registers are really pretty and add a specialness to the walls. Well made.. Linda. Decatur, GA. Mon May 30 2022

With a striking pattern of overlapping lines, the Wicker floor register lends a bold and stylish look to floors. Crafted of heavy-duty cast iron, this register conveniently includes louvers that may be removed, if desired.

For the CleanVent contemporary pattern refer to the How to Measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling, not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improperly installed, crooked, or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner airflow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. For example, a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Good looking register!. Anonymous. Mon Jun 15 2026

For over two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom, every room in between your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your style, we’ll make every step of the process as seamless and worry-free as possible.

I recently installed the Honeycomb Brass Floor Register from Signature Hardware, and it’s truly elevated the look of my space. The antique brass finish adds a touch of timeless elegance, and the honeycomb design is both classic and eye-catching without being overly ornate. Installation was a breeze — it mounts from the front and fits snugly into the duct opening. I appreciate that the mounting hardware is concealed, giving it a clean, seamless appearance. The solid brass construction feels sturdy and built to last, and it’s clear this isn’t just a decorative piece — it’s functional and well-made. If you're looking to upgrade your vent covers with something that blends style and substance, this register is a fantastic choice. I’ll definitely be ordering more for the rest of the house!. Michael. Mon Jul 07 2025

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

Proselect products represent quality and value to our trade professionals; from HVAC supplies, accessories and the tools needed for installation, to water filtration systems, hydronics and more, our diverse offering of quality products help get the job done.

Simple product, quick shipping. Better size selection than big box stores.. Michael. Mon May 05 2025

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom—and every room in between—your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we’ll make every step of the process as seamless and worry-free as possible.

Perfection! Such a pretty accent for our home.. Nancy. Wiggins, MS. Fri Mar 20 2026

ORDERING CORRECT SIZE: Always measure the duct opening size to determine which size to purchase. This size fits a standard duct opening of 6"x24". To measure your duct opening for 6"x24" vent, simply measure the width and length of the inside edges of the duct opening. The width should be 6 inches, and the length should be 24 inches. Ensure your measurements are taken from edge to edge for an accurate fit. Do not measure the old vent cover, remove the old vent and measure the duct opening. EASE OF INSTALLATION: FOR FLOOR: installation is gravity drop. The Achtek Vent from Registers and Hardware fits seamlessly into floor openings without the need for tools ensuring a quick and hassle-free setup. This makes the installation process smooth and efficient, ensuring your vent covers are securely and aesthetically installed. FOR WALL/CEILING: Counter sunk screw holes, provided with matching screws. DURABILITY & QUALITY MATERIAL: Handcrafted in Solid Sand Cast Aluminum with heavy gauge face plate thickness of approx. 1/4" (6.35 mm), these vent covers are built for durability. Aluminum metal has property of being rust and corrosion resistant in any weather condition. STURDY: Our vent covers are suitable for cool and hot airflow as well as fireplace grills. The heat-cured, fine grain powder-coated finish ensures durability and long-lasting performance. This is made of solid cast aluminum with a thickness of 1/4". They are recommended for light to medium traffic and occasional stepover. RUST-RESISTANT: The durable metal construction ensures easy maintenance and long-lasting quality. Rust-free metal makes Achtek vent covers ideal for both residential and commercial use and may be used indoors as well as outdoors. VERSATILE USAGE: Suitable for kitchens, bathrooms, living rooms, bedrooms, dining rooms, offices, dens, foyers, hallways, porches, and garages, these versatile vents ensure proper ventilation throughout your space. DESIGN: The Achtek design is an octagonal design representing the number eight which is symbolic of Renewal and Regeneration and as per Feng Shui is considered a symbol of protection and to ward off negativity. It is also seen as a symbol of good health and fortune. QUIET OPERATION: Our vents are crafted to operate quietly and prevent any rattling noises, ensuring a peaceful and enjoyable environment in your space. RECYCLABLE AND SUSTAINABLE: Upgrade your home with our recyclable and sustainable vent covers, designed to combine eco-friendly materials with lasting durability. Each cover is thoughtfully crafted to minimize environmental impact while enhancing the beauty and functionality of your space. By choosing our vent covers, you are making a conscious decision to support a greener future without compromising on quality or style. Perfect for any renovation, they offer a seamless blend of sustainability and performance. Invest in a better tomorrow with vent covers that are built to last and made from recyclable Aluminum metal.

Absolutely beautiful! This vent is really heavy and the quality is top knotch! You definitely don't have to worry about this breaking or bending if you put weight on top of it! Really beautiful way to cover an otherwise unslightly duct hole... Suzanne. Antigonish, NS. Mon Oct 30 2023

The CleanVent speaker pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Just used for our recently master bath remodel - love it! Love that it’s magnetic - makes it easy to make off an clean! (Dust) Really heavy duty and quality materials.. Kristie. San Antonio, TX. Sun Mar 26 2023

For over two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom - and every room in between - your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your style, we'll make every step of the process as seamless and worry-free as possible.

Modern contemporary pattern. Refer to the How to Measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling, not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden airflow tabs. It is easily repositioned when installed, which can fix the problem of improperly installed, crooked, or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner airflow tabs are .040 stainless steel and can be positioned in any direction.

I was having so much trouble with my bathroom vent until I found this vent cover. I love and I like that fact that you can order it in different sizes. I will be purchasing more of these for the rent of the bathrooms.. Joyce. North Wildwood, NJ. Thu May 14 2026

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

With a striking pattern of overlapping lines, the Wicker floor register lends a bold and stylish look to floors. Crafted of heavy-duty cast iron, this register conveniently includes louvers that may be removed, if desired.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 steel countersink screws. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom—and every room in between—your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we’ll make every step of the process as seamless and worry-free as possible.

To measure your size correctly, remove the existing vent cover and measure the size of the duct. The duct opening size is what should be ordered. The Ribbon grille is a resin (polyurethane) decorative vent cover that is light in weight yet sturdy and strong. Grilles are unfinished and ready for you to primer and paint to achieve the perfect color for your setting. Each grille is made using a casting process that allows for a three-dimensional look. Grilles will not rust and are not prone to corrosion which makes them excellent for high-humidity areas and dry areas alike. Ribbon grilles are flat on the back and have no inserts. Grilles should not be used on the floor and are only for wall and ceiling applications for central air conditioning and heating systems. Due to the nature of the curing process, grilles can vary very slightly in size so please take the measurements as an approximate size. All grilles should be installed using the provided screws to ensure a safe application. Please note, that these grilles are intended to be primed/painted and will come in an off-white beige color.

Pefect for painting and worked perfectly. Brittany. Midlothian, VA. Sat Jul 18 2026

The CleanVent Tropical Pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Exactly what I needed for our very modern home. Easy to install and works very well. A bit of a wait on shipping, but well worth it. Yesha. Makawao, HI. Wed Jul 08 2026

This rectangular vent grille features a clean matte white finish that seamlessly integrates with any modern interior design. The sleek rectangular design incorporates four horizontal linear slots with dark interior channels that create an attractive contrast against the white frame. Unlike standard grilles with visible mounting screws, this model uses hidden fasteners for a cleaner, more professional appearance. The matte white powder-coated finish resists fading and yellowing over time while maintaining its pristine look. The dust-resistant design features smooth surfaces that prevent buildup and make cleaning effortless. This versatile grille works perfectly for both ceiling and wall installations, making it ideal for residential and commercial HVAC applications. The modern linear aesthetic complements contemporary architecture and interior designs, from minimalist kitchens to sophisticated office spaces. The durable construction ensures long-lasting performance while the streamlined profile maintains optimal airflow efficiency. This grille represents a significant upgrade from traditional vents, offering superior aesthetics without compromising functionality.

Fits perfectly and really updated my kitchen!. Linda. Rancho Mirage, CA. Sat Aug 01 2026

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom—and every room in between—your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we’ll make every step of the process as seamless and worry-free as possible.

The AG10 Series features extruded solid recycled aluminum bars with weld-lock construction for maximum durability. Designed for custom heating and ventilation, these ‘drop-in’ bar grilles are easy to install and ideal for HVAC applications in residential and commercial locations. Whether your supply/return air vent grille needs are for new construction, traditional renovation, or a period restoration, the AG10 Series provides optimal airflow with fixed blades and is beautifully constructed with a high-quality finish that will complement any room.

the quality of grills is amazing!it looks fantastic! Delivery- as always, in perfect manner/time frame.. Boguslaw. Woodside, NY. Wed Aug 30 2023

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a duct opening will have an overall vent size of approximately, allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

The CleanVent ellispe pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Debbi. Deltona, FL. Tue May 21 2024

Refresh a room by replacing existing registers with the oversized Old Victorian smooth cast iron floor register. Durable cast iron and a Victorian-inspired design make this a top choice for your home.

This 4-inch roof vent cap crafted from galvanized steel for exceptional durability and long-lasting performance. 4 in roof cap can be used with 4 inch duct and exhaust fans for house ventilation. Equipped with a 90mm*75mm evenly spaced mesh cover, the vent cap effectively blocks small animals, birds, rain, snow, leaves, and debris from entering, while maintaining optimal ventilation to keep your space safe and well-aired. Ideal for home roof ventilation systems, this vent cap is also perfect for installation in kitchens, bathrooms, attics, and other areas.

This sleek OKUN linear air vent features a modern square design with a pristine matte white finish that seamlessly blends into any ceiling or wall installation. The grille showcases four horizontal louvers with a sophisticated linear pattern that provides excellent airflow distribution while maintaining an ultra-clean aesthetic. The innovative hidden screw design eliminates visible fasteners for a flawless appearance, while the dust-resistant construction prevents buildup and maintains long-term performance. The fade-resistant matte white coating ensures the finish won't yellow or discolor over time, unlike standard plastic grilles. The precision-manufactured louvers allow optimal air circulation with minimal noise, making it perfect for residential and commercial HVAC systems. Installation is versatile for both ceiling and wall mounting, adapting to various architectural styles from contemporary to traditional. The square format and neutral finish complement any interior design scheme while the robust construction ensures reliable operation. This premium air vent combines functional performance with aesthetic appeal, delivering professional-grade ventilation without compromising visual design elements.

The vent cover arrived quickly and in good condition. I like the modern, clean style and the screws are hidden. The installation instructions are clear and remind you multiple times to measure the opening and purchase the cover appropriate for the space. There is no wheel or mechanism to open and close the baffles. You use your fingers or a screwdriver which could be a pain if you are using it in a ceiling or other difficult to access area. I have not installed yet but as I said its pretty straightforward as long as I have the right size.. Sharon. Wilkes Barre, PA. Mon May 04 2026

With a striking pattern of overlapping lines, the Wicker floor register lends a bold and stylish look to floors. Crafted of heavy-duty cast iron, this register conveniently includes louvers that may be removed, if desired.

Refresh a room by replacing existing registers with the oversized Old Victorian smooth cast iron floor register. Durable cast iron and a Victorian-inspired design make this a top choice for your home.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

For more than two decades, Signature Hardware has provided beautifully crafted products that make a house your home. From the kitchen to the bathroom—and every room in between—your Signature style starts here. At Signature Hardware, we do things the right way. When you find a product that compliments your individual style, we’ll make every step of the process as seamless and worry-free as possible.

This register looks great and is durable enough but the finish is beyond flat to a fault. If you step on it with any dust or dirt on the bottom of your shoe that substance transfers and depending upon what it is could be difficult to remove. A matte or eggshell semi-gloss finish might prevent that. I'm going to have to paint all of these to keep that from happening.. Particular Builder. Tue Oct 26 2021

𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: It is ¾” thick and designed to sit FLUSH on this sized hardwood floors. We also accept custom made orders to your specific thickness. Please contact us directly. The register comes integrated with a box unit that makes installation easy. Our registers DO NOT come with louvers or dampers box to control airflow. Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"x12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"x14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"x12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"x14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic vent ½” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 steel countersink screws. Decorative screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

The CleanVent classic pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Sleek. Virginia. Tue Sep 15 2026

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, invincible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

Add a clean, decorative finish to your wall or ceiling supply vent with this unfinished wooden register made from a 1/4" thick birch wood panel. Each register is crafted to fit the selected duct opening size and includes 2 installation holes with 2 standard steel countersink screws. Decorative brass screws may be available as a selectable option. The natural unfinished wood surface can be painted or stained to match your room, trim, ceiling, or wall décor. White semigloss paint is available as a selectable option.  These registers are designed to screw into drywall. For the best fit, order by the actual duct opening size, not by the size of your existing cover. Remove the old register, measure the inside width and length of the duct opening, and select the matching size, with width listed first and length listed second. For example, a 6" x 10" duct opening will have an overall vent size of approximately 8" x 12", allowing a 1" border around the opening for installation. Please note that this decorative register cover does not include louvers or a damper box to redirect airflow. All our designs are airflow tested to guarantee maximum efficiency.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄⫸ All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our return air covers are made-to-order and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐄𝐒𝐂𝐑𝐈𝐏𝐈𝐎𝐍⫸ Our metal register covers help transform a rooms appearance with minimal effort. They are designed to sit on top of the floor and can be held down by screws. The registers are black powder coated, this finish gives a protective coating that will resist staining or corrosion. With a 1/16” thickness and a well-defined cut, these registers will not only last a lifetime but will also enhance the look of any room. We include 2 steel black counter sink screws. INSTALLATION These floor vents are 1/16" thick metal with a powder coated black. -Comes with 2 holes for installation so that customers can drill them. -No dampers included. -Design size has to match the duct opening size. Predrill first our floors before installing the screws. Check video of Installation. 𝐇𝐎𝐖 𝐓𝐎 𝐌𝐄𝐀𝐒𝐔𝐑𝐄⫸ We go by the duct opening because that is the Airflow you will need. Please order by the DUCT OPENING or HOLE SIZE to ensure proper fit. Note: if your duct opening is 6x10, the overall size of the vent will be 8x12. This will allow you to have 1" border with one hole on the right and another on the left so you can drill it in your floor. If you need a custom size, please contact us. Sizes : Duct opening 4x10, Vent size 6x12 Duct opening 6x10, Vent size 8x12 Duct opening 4x12, Vent size 6x14 Duct opening 6x12, Vent size 8x14 𝐍𝐎𝐓𝐄⫸ : Our register DO NOT come with louvers or dampers box to control airflow. Since our products are made to order and are considered custom orders, we don't take any returns or exchanges unless it has been damage while shipping or for having manufacturer issues. We are not responsible for wrong dimensions given by the contractors or customers. So PLEASE double check your dimensions and / or opening area before purchase.

The CleanVent contemporary pattern Refer to how to measure guide below to find your vent sizing. The ceiling vent is one of the most overlooked details in a room: the CleanVent sits flat to the ceiling making it part of the ceiling not an obstruction. The CleanVent brings a hint of design to your ceiling, eliminating the cluttered look of vents protruding into a flat ceiling. The CleanVent is a magnetic, screw-less, retrofit vent cover: featuring hidden air flow tabs. It is easily repositioned when installed, which can fix the problem of improper installed, crooked or misaligned vents. The CleanVent attaches via magnets screwed into the vent box itself, pulling the vent box tight to the ceiling which can eliminate vent sweating. Easily removed for cleaning and painting. Each CleanVent is manufactured in the USA out of .040 5052-H32 aluminum, (not plastic). The CleanVent and defusing screen are powder-coated in gloss white and can be painted. The Inner air flow tabs are .040 stainless steel and can be positioned in any direction. Please note the CleanVent sizes are for inside vent measurements, the overall size of the CleanVent is 1-1/2 inches bigger on all 4 sides for the frame around the vent opening. Example a 6 x 6 vent overall size is 9 x 9, which gives plenty of room for covering up ceiling stains and crooked installed vents.

Begonia. CA. Thu Nov 06 2025

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, Invisible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.