WAC Landscape Lighting Step & Deck Lights

These are high-quality lights at a great price.. Michelle. Cleveland, OH. Wed Oct 03 2018

lights up steps good. Hope. Emerald Isle, NC. Tue May 26 2026

Vertical rectangle step light designed for safety and style on stairways, patios, decks, balcony areas, walkways, and building perimeters. Features an architectural design. Energy-efficient for long-lasting outdoor lighting solutions. Creates an attractive, romantic impression at night.

small,but adequate as a night light. Ewa. White Haven, PA. Sat Oct 27 2018

just the right amount of light on my deck steps.. Diane. Olney, MD. Sun Apr 19 2020

love it, fits flush. it's s bit to bright. i would like to be dimmable but it's not.. Ban. CA. Wed Aug 05 2020

This LED 12V high-performance and durable strip light is IP66-rated for wet locations and integrates smoothly with outdoor 12V transformers, offering diode-free, COB technology illumination. Energy-efficient at only 1.5W per foot, it provides 100 lumens per foot with a 90+ color rendering index. This UV-stabilized, IP66-rated strip is ideal for any setting, including water features. Easy to install with push-in connectors and cuttable for custom lengths. Safe for wet locations and long-lasting with a 50000-hour lifespan, this strip is perfect for creating inviting and efficient outdoor lighting. A magnetic or electronic 12V power supply is required. We suggest a WAC landscape lighting stainless steel outdoor power supply: (75W) 9075-TRN-SS, (150W) 9150-TRN-SS, (300W) 9300-TRN-SS, (600W) 9600-TRN or you can easily connect to an existing 12V landscape lighting system for ease of installation. 1ft, 5ft, or 10ft sections and may be cut in the field at the end of a run (note: unused strip is not useable after field cut, so order sizes according to project needs). A maximum 35ft run length can be created for a single continuous run of strip light. Use with T24-OD-IC6-WT power cable to connect the tape to the power supply.

Create dynamic, eye-catching stunning vignettes with the WAC Colorscaping system. Striking and dramatic. Colorscaping luminaires illuminate an outdoor kitchen, bar, or stone wall in living color. Colorscaping is a state-of-the-art fully tunable landscape lighting system where each luminaire can be individually controlled or grouped from the myWAC iOS or Android app. Every Colorscaping fixture can be adjusted from 2700K to 6500K and millions of bright and vibrant colors. Colorscaping fixtures connect to a patented WAC power supply. WAC Colorscaping fixtures are installed to the power supply using standard 12-2 landscape wire making the system incredibly simple to install and retrofit onto an existing landscape lighting system. Data is communicated to Colorscaping fixtures through the 12-2 low voltage landscape cable using PLC (power line communication) technology that sends data signals between the power supply and Colorscaping fixtures, eliminating the need to run secondary wires that can be found in competing smart or color changing landscape systems. A wifi-powered WAC Colorscaping power supply can control all fixtures with no wifi range limitation to your fixtures as long as the power supply is within wifi range (Cat45 port is available on the power supply for a more reliable hardwired internet connection). The WAC Colorscaping power supply features two shared power banks that can be used to power both Colorscaping and basic 12V landscape lighting fixtures on a single system, activating complete smart controls for Colorscaping fixtures and basic smart features for non-Colorscaping fixtures, including timer/scheduler, on/off, and brightness control. The WAC Colorscaping power supply has multiple 12V taps that can autodetect voltage drop and send a guaranteed balanced 12V to each landscape lighting fixture on the system. The WAC Colorscaping power supply has 16-quick adjust color settings that you can interface with to easily toggle and test your Colorscaping fixtures.

Create dynamic, eye-catching stunning vignettes with the WAC Colorscaping system. Celebrate artful illumination with Colorscaping wall cylinder, wall wash, and accent lights from WAC landscape lighting. Heighten drama to render visual impact on magnificent tree trunk and branch silhouettes, brilliant colorful scenery on your hedgerow, or a swath of light washing a facade. Customize your experiences and enjoy your passion for color and the language of light with unbridled enthusiasm and a nearly endless palette. Colorscaping is a state-of-the-art fully tunable landscape lighting system where each luminaire can be individually controlled or grouped from the Mywac IOS or Android app. Every Colorscaping fixture can be adjusted from 2700k to 6500k and millions of bright and vibrant colors. Colorscaping fixtures connect to a patented WAC power supply that is sold in 150W (8150CS-TRN-SS) and 300W (8300CS-TRN-SS) capacities. Wac Colorscaping fixtures are installed to the power supply using standard 12-2 landscape wire making the system incredibly simple to install and retrofit onto an existing landscape lighting system. Data is communicated to colorscaping fixtures through the 12-2 low voltage landscape cable using plc (power line communication) technology that sends data signals between the power supply and Colorscaping fixtures, eliminating the need to run secondary wires that can be found in competing smart or color changing landscape systems. A wifi-powered WAC Colorscaping power supply can control all fixtures with no wifi range limitation to your fixtures as long as the power supply is within the wifi range (cat45 port is available on the power supply for a more reliable hardwired internet connection). The WAC Colorscaping power supply features two shared power banks that can be used to power both colorscaping and basic 12V landscape lighting fixtures on a single system, activating complete smart controls for Colorscaping fixtures, and basic smart features for Non-Colorscaping fixtures, including timer/scheduler, on/off, and brightness control (note: does not make Non-Colorscaping fixtures color tunable). The Wac Colorscaping power supply has multiple 12V taps that can autodetect voltage drop and send a guaranteed balanced 12V to each landscape lighting fixture on the system. The WAC Colorscaping power supply has 16-quick adjust color settings that you can interface with to easily toggle and test your Colorscaping fixtures.

120V step and wall lights by WAC Lighting are offered in a variety of styles and can be installed onto a standard 2in x 4in the electrical junction box. These luminaires offer enhanced energy-efficient functionality and optimized light output to adequately illuminate stairs, walls, and walkways with little or no glare and are perfect for indoor or outdoor applications. Factory-sealed and water are tight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.

Theses are for our stairs for safety at night, love them!!. Susan. Fairbanks, AK. Thu Oct 23 2025

Landscape 2" recessed luminaire for step and wall light applications.

Create dynamic, eye-catching stunning vignettes with the WAC Colorscaping system. Striking and dramatic. Colorscaping luminaires illuminate an outdoor kitchen, bar, or stone wall in living color. Colorscaping is a state-of-the-art fully tunable landscape lighting system where each luminaire can be individually controlled or grouped from the myWAC iOS or Android app. Every Colorscaping fixture can be adjusted from 2700K to 6500K and millions of bright and vibrant colors. Colorscaping fixtures connect to a patented WAC power supply. WAC Colorscaping fixtures are installed to the power supply using standard 12-2 landscape wire making the system incredibly simple to install and retrofit onto an existing landscape lighting system. Data is communicated to Colorscaping fixtures through the 12-2 low voltage landscape cable using PLC (power line communication) technology that sends data signals between the power supply and Colorscaping fixtures, eliminating the need to run secondary wires that can be found in competing smart or color changing landscape systems. A wifi-powered WAC Colorscaping power supply can control all fixtures with no wifi range limitation to your fixtures as long as the power supply is within wifi range (Cat45 port is available on the power supply for a more reliable hardwired internet connection). The WAC Colorscaping power supply features two shared power banks that can be used to power both Colorscaping and basic 12V landscape lighting fixtures on a single system, activating complete smart controls for Colorscaping fixtures and basic smart features for non-Colorscaping fixtures, including timer/scheduler, on/off, and brightness control. The WAC Colorscaping power supply has multiple 12V taps that can autodetect voltage drop and send a guaranteed balanced 12V to each landscape lighting fixture on the system. The WAC Colorscaping power supply has 16-quick adjust color settings that you can interface with to easily toggle and test your Colorscaping fixtures.

120V step and wall lights by WAC Lighting are offered in a variety of styles and can be installed onto a standard 2in x 4in the electrical junction box. These luminaires offer enhanced energy-efficient functionality and optimized light output to adequately illuminate stairs, walls, and walkways with little or no glare and are perfect for indoor or outdoor applications. Factory-sealed and watertight with an ip66 rating for protection against high-pressure water jets and outdoor elements. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and are recommended for use in coastal or marine environments.

This slim low-profile step and wall light are designed to surface mount onto any application without the need for an electrical box like traditional step and wall lights, enabling the versatility to install the WAC surface-mounted step and wall light anywhere you would like. This sleek and versatile step and wall light are sure to meet your expectations. UL and cUL are listed for exterior locations with an IP66 rating to withstand rain and continuous streams of water. Constructed from a corrosion-resistant aluminum alloy with a die-cast solid brass option for marine or coastal environments. Accepts an input voltage range of 9-15VAC and can tap into an existing landscape lighting power supply. If there is no existing power supply, this light will require a remote 12VAC transformer (EN-12100-RB2) sold separately to step down your 120VAC household voltage down to 12VAC. A 3ft lead wire is included for ease of installation.

120V step and wall lights by WAC Lighting are offered in a variety of styles and can be installed onto a standard 2in x 4in the electrical junction box. These luminaires offer enhanced energy-efficient functionality and optimized light output to adequately illuminate stairs, walls, and walkways with little or no glare and are perfect for indoor or outdoor applications. Factory-sealed and water are tight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.

This slim low-profile step and wall light are designed to surface mount onto any application without the need for an electrical box like traditional step and wall lights, enabling the versatility to install the WAC surface-mounted step and wall light anywhere you would like. This sleek and versatile step and wall light are sure to meet your expectations. UL and cUL are listed for exterior locations with an IP66 rating to withstand rain and continuous streams of water. Constructed from a corrosion-resistant aluminum alloy with a die-cast solid brass option for marine or coastal environments. Accepts an input voltage range of 9-15VAC and can tap into an existing landscape lighting power supply. If there is no existing power supply, this light will require a remote 12VAC transformer (EN-12100-RB2) sold separately to step down your 120VAC household voltage down to 12VAC. A 6ft lead wire is included for ease of installation.

120V step and wall lights by WAC Lighting are offered in a variety of styles and can be installed onto a standard 2in x 4in the electrical junction box. These luminaires offer enhanced energy-efficient functionality and optimized light output to adequately illuminate stairs, walls, and walkways with little or no glare and are perfect for indoor or outdoor applications. Factory-sealed and water are tight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.

120V step and wall lights by WAC Lighting are offered in a variety of styles and can be installed onto a standard 2in x 4in the electrical junction box. These luminaires offer enhanced energy-efficient functionality and optimized light output to adequately illuminate stairs, walls, and walkways with little or no glare and are perfect for indoor or outdoor applications. Factory-sealed and watertight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.

120V step and wall lights by WAC Lighting are offered in a variety of styles and can be installed onto a standard 2in x 4in the electrical junction box. These luminaires offer enhanced energy-efficient functionality and optimized light output to adequately illuminate stairs, walls, and walkways with little or no glare and are perfect for indoor or outdoor applications. Factory-sealed and water are tight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.

120V step and wall lights by WAC Lighting are offered in a variety of styles and can be installed onto a standard 2in x 4in the electrical junction box. These luminaires offer enhanced energy-efficient functionality and optimized light output to adequately illuminate stairs, walls, and walkways with little or no glare and are perfect for indoor or outdoor applications. Factory-sealed and water are tight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.

120V step and wall lights by WAC Lighting are offered in a variety of styles and can be installed onto a standard 2in x 4in the electrical junction box. These luminaires offer enhanced energy-efficient functionality and optimized light output to adequately illuminate stairs, walls, and walkways with little or no glare and are perfect for indoor or outdoor applications. Factory-sealed and watertight with an IP66 rating for protection against high-pressure water jets and outdoor elements. Cast using a special k-alloy aluminum that is engineered to withstand the most challenging environments over time. Stainless steel (-SS) or solid brass coated in bronze (-BBR) finishes are available for enhanced protection against corrosive elements and is recommended for use in coastal or marine environments.

Landscape 2" recessed luminaire for step and wall light applications.