Armacost Lighting 421503

The Armacost Lighting RibbonFlex Home Dim to Warm LED Tape Light Kit is a perfect all-around solution for any kitchen, bedroom or living room installation. At full brightness, the LED strip light kit’s color temperature is Soft-Bright (3000K). When the LED kit is dimmer, the color temperature transitions to a Warm-White (1800K) glow. The lighting kit features an RF (Radio Frequency) remote that allows control of dimming and LED lighting effects. Control up to three kits with a single remote for larger, custom installations. Cannot be used with AC dimming switches.

At 3000K the color temperature of these LED lights is ideal—it’s slightly yellow, so it blends well with my incandescent bulbs, and it’s better than hideous florescent lights. As the lights are dimmed, they get more yellow. The remote is very handy for turning on and dimming; there are 4 levels with individual buttons (100%, 50%, 25%, and 10%), and there also are up/down buttons for more steps in between and below 10%. So many steps for an LED light is unusual—and great. I'm not sure why, but there are also flickering/light pattern options. The power pack on the cord has two holes so that you can screw it into place, which is nice. After installation, some areas of the self-adhesive strip were sagging and needed to be pressed back. If it continues, I expect I’ll need a little glue to keep it in place.. Savannah. San Francisco, CA. Tue Mar 16 2021

The Armacost Lighting RibbonFlex Pro 24V Continuous LED Strip Light is the perfect solution for seamless accent lighting. Using Chip-on-Board (COB) technology, the LED strip light produces a seamless strip of light that is free of spots or breaks. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are longer lasting and create a premium look. COB LED light tape is ideal for many applications including above and under cabinet lighting, tray ceiling lighting, and toe kicks. They are especially perfect for installations next to shiny surfaces like counter tops or floors. Use with an Armacost Lighting 24V power supply (required) and optional dimmer or switch, both sold separately.

awesome. Frank. Sat May 30 2026

The 24 Volt Dimmable Potted LED Driver from Armacost Lighting features professional grade, high-performance electronics that provide smooth, flicker-free 5% to 100% LED light dimming.ÿ The high power factor LED power supply delivers stable and energy-efficient dimming and low-voltage power to any LED light installation. Potted for insulation and noise reduction, the power supply cannot be removed from the enclosure. For the best results use Armacost Lighting LED lights, switches and AC dimming LED light controls. Suitable for both dry and damp locations.

Deborah. Orland Park, IL. Fri Oct 17 2025

Discover seamless waterproof LED tape lighting with 24V COB Outdoor LED Strip Lights from Armacost Lighting. The continuous LED light strips utilize Chip-on-Board (COB) technology, to produce smooth, bright, and spot-free illumination. With IP67 weatherproof protection, flexible LED strip lights are suitable for both indoor and outdoor environments. Designed to meet the needs of lighting professionals, it features top-quality components for superior longevity and a premium appearance. It's ideal for outdoor LED accent lighting on decks, porches, docks, and patios. Pair it with an Armacost Lighting 24V power supply (required) and optional dimmer or switch (sold separately) for the ultimate lighting experience.

The Armacost Lighting RibbonFlex Pro 24V Continuous LED Strip Light is the perfect solution for seamless accent lighting. Using Chip-on-Board (COB) technology, the LED strip light produces a seamless strip of light that is free of spots or breaks. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are longer lasting and create a premium look. COB LED light tape is ideal for many applications including above and under cabinet lighting, tray ceiling lighting, and toe kicks. They are especially perfect for installations next to shiny surfaces like counter tops or floors. Use with an Armacost Lighting 24V power supply (required) and optional dimmer or switch, both sold separately.

3000K, 32.8 ft

RibbonFlex Pro White 12 Volt LED Light Strips with COB (Chip-on-Board) illumination. COB LED lights produce a seamless strip of light, free of LED spots common with traditional SMD tape lighting. Ideal for under cabinet accent lighting or installations adjacent to shiny surfaces. Enjoy uniform light distribution from 12V LED strip lights in residential and commercial applications; they also work great for marine and RV lighting. Use with an Armacost Lighting 12V power supply (required) and optional dimmer or switch, both sold separately.

Standard 24 Volt LED Power Supplies from Armacost Lighting deliver energy-efficient power to LED light installations. The non-dimming LED drivers are designed using professional grade electronics that provide stable power output, ideal for LED strip lights and under cabinet lighting. No minimum load required. Plug-in or hardwire with detachable AC power cord. For best results use with Armacost Lighting products. Not compatible with 120V AC dimmers.

RibbonFlex Pro 24 Volt White CCT Tunable LED Tape Light from Armacost Lighting is an innovative custom color temperature lighting solution, perfect for any accent lighting installation, including under cabinets, bedrooms, bathrooms, or living rooms. The unique tunable technology allows you to select shades of white from warm (2700K) to cool (5000K) using the Proline CCT Tunable White LED Controller (sold separately). These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high-quality, professional-grade components that are long-lasting and create a premium look. LED tape light can be used as-is or cut to size for custom installations. Cut strip light pieces can be securely reconnected using the included tape connectors to extend the length or go around corners. An Armacost Lighting 24V power supply is required and sold separately.

The Armacost Lighting RibbonFlex Pro 24V Continuous LED Strip Light is the perfect solution for seamless accent lighting. Using Chip-on-Board (COB) technology, the LED strip light produces a seamless strip of light that is free of spots or breaks. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are longer lasting and create a premium look. COB LED light tape is ideal for many applications including above and under cabinet lighting, tray ceiling lighting, and toe kicks. They are especially perfect for installations next to shiny surfaces like counter tops or floors. Use with an Armacost Lighting 24V power supply (required) and optional dimmer or switch, both sold separately.

Check the power source voltage. They came in the “all you need” bundle mismatched without a connection between the two. I wanted lighting not a project. Nathalie. Prescott, AZ. Tue Apr 21 2026

Armacost Lighting’s RibbonFlex Pro 24 Volt White LED Strip Light Tape is perfect for large LED lighting projects. Ideal for a variety of accent lighting applications, including above or under cabinet lighting, tray ceiling lighting, and shelving lighting, these LED strip lights are designed to meet the layout and installation requirements of lighting professionals. LED tape light can be used as-is or cut as needed for a custom installation. Use the included tape connectors to securely reconnect cut strip light pieces. RibbonFlex Pro LED Tape Light is part of Armacost Lighting’s premium-quality component-based system. Pair with an Armacost Lighting 24V power supply (required) and optional dimmer or switch for complete dimming and power control, both sold separately.

RibbonFlex Pro 24 Volt White Dim-to-Warm LED Tape Light from Armacost Lighting is a unique solution for LED accent lighting installations where a warm glow-dimming effect is desired, including under cabinets, bedrooms, bathrooms, or living rooms. Take your lighting installation to the next level with Dim-to-Warm technology, which automatically warms the white LED lights from 3000K to 1800K as they are dimmed. Pair with a low-voltage LED dimmer, such as the ProLine White or Single Color LED Controller (sold separately). These LED strip lights are designed to meet lighting professionals’ layout and installation needs and feature long-lasting quality, professional-grade components that create a premium look. An Armacost Lighting 24V power supply is required and sold separately.

Armacost Lighting’s RibbonFlex Pro 24 Volt White LED Strip Light Tape is perfect for large LED lighting projects. Ideal for a variety of accent lighting applications, including above or under cabinet lighting, tray ceiling lighting, and shelving lighting, these LED strip lights are designed to meet the layout and installation requirements of lighting professionals. LED tape light can be used as-is or cut as needed for a custom installation. Use the included tape connectors to securely reconnect cut strip light pieces. RibbonFlex Pro LED Tape Light is part of Armacost Lighting’s premium-quality component-based system. Pair with an Armacost Lighting 24V power supply (required) and optional dimmer or switch for complete dimming and power control, both sold separately.

The Armacost Lighting chip on board (cob) soft-bright white (3000k) LED tape light kit is an easy-to-install solution for seamless accent lighting. Using cob technology, the LED strip light kit eliminates visible LED dots (diodes) creating a continuous strip of light that is free of spots or breaks. The cob-led kit is easy to install using the 3m peel-and-stick backings. The LED kit is easily controlled from up to 50 ft. Away using the rf (radio frequency) remote control.

Installed under the cabinets at the kitchen. Very good quality and easy to install. Katerina. Woodbridge, CT. Wed Mar 13 2024

Armacost Lighting's RibbonFlex Lux 24V White CCT COB LED Strip Light Kit combines tunable white LED temperature selection technology with chip-on-board design to create a smooth and seamless light display. The selectable LEDs are adjustable between Warm White (2700K) and Daylight (5000K). Choose your desired color temperature, dim from 100% to 0% brightness, and save favorite settings with the sleek, ergonomic LED controller.

Armacost Lighting?s 12 Volt Standard LED Power Supply delivers energy-efficient, low voltage power to any LED lighting installation. The constant voltage LED driver is designed using high-performance, professional grade electronics that provide stable low voltage power output.ÿ No minimum load required. Plug-in or hardwire with detachable AC power cord. Not compatible with 120V AC dimmers. For best results use with Armacost Lighting LED products.

Discover seamless waterproof LED tape lighting with 24V COB Outdoor LED Strip Lights from Armacost Lighting. The continuous LED light strips utilize Chip-on-Board (COB) technology, to produce smooth, bright, and spot-free illumination. With IP67 weatherproof protection, flexible LED strip lights are suitable for both indoor and outdoor environments. Designed to meet the needs of lighting professionals, it features top-quality components for superior longevity and a premium appearance. It's ideal for outdoor LED accent lighting on decks, porches, docks, and patios. Pair it with an Armacost Lighting 24V power supply (required) and optional dimmer or switch (sold separately) for the ultimate lighting experience.

The Armacost Lighting RibbonFlex Pro 24V Continuous LED Strip Light is the perfect solution for seamless accent lighting. Using Chip-on-Board (COB) technology, the LED strip light produces a seamless strip of light that is free of spots or breaks. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are longer lasting and create a premium look. COB LED light tape is ideal for many applications including above and under cabinet lighting, tray ceiling lighting, and toe kicks. They are especially perfect for installations next to shiny surfaces like counter tops or floors. Use with an Armacost Lighting 24V power supply (required) and optional dimmer or switch, both sold separately.

Easy to install as a DYI project!. Tammy Sue. Thu Feb 27 2025

The Armacost Lighting RibbonFlex Pro 24V Continuous LED Strip Light is the perfect solution for seamless accent lighting. Using Chip-on-Board (COB) technology, the LED strip light produces a seamless strip of light that is free of spots or breaks. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are longer lasting and create a premium look. COB LED light tape is ideal for many applications including above and under cabinet lighting, tray ceiling lighting, and toe kicks. They are especially perfect for installations next to shiny surfaces like counter tops or floors. Use with an Armacost Lighting 24V power supply (required) and optional dimmer or switch, both sold separately.

The RibbonFlex LUX AC Dimmable White Continuous LED Strip Light Kit from Armacost Lighting features COB (Chip on Board) technology for a clean, spot-free LED light illumination. Traditional LED tape light can leave "LED dot" reflections on shiny surfaces, but COB tape light produces a continuous glow, making it perfect for accent and under cabinet lighting. The white LED light is fully dimmable and can be easily paired with a standard 120 volt in-wall dimmer switch (sold separately). Complete tape light kit comes fully assembled, including plug-in LED power supply.

The lighting looks great. The connectors that are provided are horrible and did not work. I had to solder the wiring onto the light strips.. Brent. Canada. Mon Jan 27 2025

The Armacost Lighting RibbonFlex Pro 24V Continuous LED Strip Light is the perfect solution for seamless accent lighting. Using Chip-on-Board (COB) technology, the LED strip light produces a seamless strip of light that is free of spots or breaks. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are longer lasting and create a premium look. COB LED light tape is ideal for many applications including above and under cabinet lighting, tray ceiling lighting, and toe kicks. They are especially perfect for installations next to shiny surfaces like counter tops or floors. Use with an Armacost Lighting 24V power supply (required) and optional dimmer or switch, both sold separately.

RibbonFlex Pro 24 Volt White LED Strip Light Tape from Armacost Lighting is ideal for under cabinet lighting, tray ceiling lighting, toe kicks, architectural LED lighting, RVs, boats, motor homes, and commercial lighting projects. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature premium, professional-grade components that create a high-quality look. LED tape light can be used as-is or cut as needed for custom installations using the included tape connectors to securely reconnect cut strip pieces. RibbonFlex Pro LED Tape Light is part of Armacost Lighting’s premium-quality component-based system. Pair with a 24V power supply (required) and an optional dimmer or switch for complete dimming and power control, both sold separately.

3000K

RibbonFlex Pro LED Tape Light is the perfect LED light strip for low-voltage, energy-efficient accent lighting projects. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are long-lasting and create a premium look. 12V Strip lights are easy-to-install and feature 3M adhesive backing for a permanent hold. The LED light tape is ideal for many applications including under cabinet lighting, tray ceiling lighting, toe kicks, RVs, boats, motor homes, and commercial spaces. RibbonFlex Pro LED Tape Light is part of the premium-quality component-based system, designed for custom installations.

4000K, 16.4 ft

RibbonFlex Pro White 12 Volt LED Light Strips with COB (Chip-on-Board) illumination. COB LED lights produce a seamless strip of light, free of LED spots common with traditional SMD tape lighting. Ideal for under cabinet accent lighting or installations adjacent to shiny surfaces. Enjoy uniform light distribution from 12V LED strip lights in residential and commercial applications; they also work great for marine and RV lighting. Use with an Armacost Lighting 12V power supply (required) and optional dimmer or switch, both sold separately.

Discover seamless waterproof LED tape lighting with 24V COB Outdoor LED Strip Lights from Armacost Lighting. The continuous LED light strips utilize Chip-on-Board (COB) technology, to produce smooth, bright, and spot-free illumination. With IP67 weatherproof protection, flexible LED strip lights are suitable for both indoor and outdoor environments. Designed to meet the needs of lighting professionals, it features top-quality components for superior longevity and a premium appearance. It's ideal for outdoor LED accent lighting on decks, porches, docks, and patios. Pair it with an Armacost Lighting 24V power supply (required) and optional dimmer or switch (sold separately) for the ultimate lighting experience.

2-Pin SureLock Pro Tape to Wire Channel Connectors from Armacost Lighting are a fast and easy way to connect 2 channel sections of tape light into 1 continuous strip. No soldering is required to make a secure, reliable connection for 2C tape light. Compatible with indoor Ribbon Flex circuits. Great for large or custom undercabinet and accent LED lighting installations for residential, commercial, RV and boating.

The Armacost Lighting RibbonFlex Pro 24V Continuous LED Strip Light is the perfect solution for seamless accent lighting. Using Chip-on-Board (COB) technology, the LED strip light produces a seamless strip of light that is free of spots or breaks. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are longer lasting and create a premium look. COB LED light tape is ideal for many applications including above and under cabinet lighting, tray ceiling lighting, and toe kicks. They are especially perfect for installations next to shiny surfaces like counter tops or floors. Use with an Armacost Lighting 24V power supply (required) and optional dimmer or switch, both sold separately.

LED channels are useful for LED strip light installations where the lighting will be visible, such as on the underside of a shelf or in a display cabinet, or to soften lighting to minimize reflective hot spots on nearby surfaces. These 39 inch LED strip light diffusers, or aluminum extrusions, are made from high quality, double-anodized, aviation-grade aluminum alloy and they can be cut to length using a fine-tooth handsaw and run in sequence to create a longer fixture. Wide Surface Mount models are ideal for multicolor and outdoor LED strip light. The included brackets guarantee easy and secure mounting to the desired surface, and can also be used as connectors between channels. Channels come in pack of 5.

Armacost Lighting’s RibbonFlex Pro 24 Volt White LED Strip Light Tape is perfect for large LED lighting projects. Ideal for a variety of accent lighting applications, including above or under cabinet lighting, tray ceiling lighting, and shelving lighting, these LED strip lights are designed to meet the layout and installation requirements of lighting professionals. LED tape light can be used as-is or cut as needed for a custom installation. Use the included tape connectors to securely reconnect cut strip light pieces. RibbonFlex Pro LED Tape Light is part of Armacost Lighting’s premium-quality component-based system. Pair with an Armacost Lighting 24V power supply (required) and optional dimmer or switch for complete dimming and power control, both sold separately.

The Armacost Lighting RibbonFlex Pro 24V Continuous LED Strip Light is the perfect solution for seamless accent lighting. Using Chip-on-Board (COB) technology, the LED strip light produces a seamless strip of light that is free of spots or breaks. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are longer lasting and create a premium look. COB LED light tape is ideal for many applications including above and under cabinet lighting, tray ceiling lighting, and toe kicks. They are especially perfect for installations next to shiny surfaces like counter tops or floors. Use with an Armacost Lighting 24V power supply (required) and optional dimmer or switch, both sold separately.

Armacost Lighting’s RibbonFlex Pro 24 Volt White LED Strip Light Tape is perfect for large LED lighting projects. Ideal for a variety of accent lighting applications, including above or under cabinet lighting, tray ceiling lighting, and shelving lighting, these LED strip lights are designed to meet the layout and installation requirements of lighting professionals. LED tape light can be used as-is or cut as needed for a custom installation. Use the included tape connectors to securely reconnect cut strip light pieces. RibbonFlex Pro LED Tape Light is part of Armacost Lighting’s premium-quality component-based system. Pair with an Armacost Lighting 24V power supply (required) and optional dimmer or switch for complete dimming and power control, both sold separately.

Discover seamless waterproof LED tape lighting with 24V COB Outdoor LED Strip Lights from Armacost Lighting. The continuous LED light strips utilize Chip-on-Board (COB) technology, to produce smooth, bright, and spot-free illumination. With IP67 weatherproof protection, flexible LED strip lights are suitable for both indoor and outdoor environments. Designed to meet the needs of lighting professionals, it features top-quality components for superior longevity and a premium appearance. It's ideal for outdoor LED accent lighting on decks, porches, docks, and patios. Pair it with an Armacost Lighting 24V power supply (required) and optional dimmer or switch (sold separately) for the ultimate lighting experience.

The 120 Watt; 24 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “pop-off”. The power supply is rated up to 120-watts at 24-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Suitable for both dry and wet locations. Includes: One 120W, 24V LED Power Supply.

Powering my led undercounter lights very effectively. No flicker, no heat to speak of (using 9M of 24 VDC LED strips.. William. Mesa, AZ. Thu Jun 04 2026

The RibbonFlex Lux 24V Multicolor COB LED Strip Light Kit from Armacost Lighting combines versatile color changing RGB+W LED lights with innovative COB (Chip-on-Board) technology in a all-in-one LED lighting kit. COB tape light produces a continuous glow for seamless, spot-free illumination; ideal for shiny surfaces like kitchen countertops. The RGB+W LED strips produce a wide variety of colors plus a soft (3000K) white. Control color output, dynamic effects, dimming, and save four favorite settings with the included premium RF remote.

Accessory packs to mount LED Tape Light Channels from Armacost Lighting. LED Tape Light Channels are ideal for installations where the lighting will be visible, such as on the underside of a shelf or in a display cabinet. Accessory packs available for Recess & Recess Drywall Mount, Corner Mount, Surface Mount, Deep & Wide Surface Mount, and Bendable LED strip light mounting channels.

32.8 ft, 2700K

RibbonFlex Pro White 12 Volt LED Light Strips with COB (Chip-on-Board) illumination. COB LED lights produce a seamless strip of light, free of LED spots common with traditional SMD tape lighting. Ideal for under cabinet accent lighting or installations adjacent to shiny surfaces. Enjoy uniform light distribution from 12V LED strip lights in residential and commercial applications; they also work great for marine and RV lighting. Use with an Armacost Lighting 12V power supply (required) and optional dimmer or switch, both sold separately.

Armacost Lighting’s RibbonFlex Pro 24 Volt White LED Strip Light Tape is designed to meet the layout and installation requirements of lighting professionals and feature high-quality, professional-grade components. that are long-lasting and create a premium look.is perfect for large LED lighting projects. With an industry-leading lifespan and higher lumens output, this is the perfect LED solution for architectural LED lighting, under cabinet lighting, tray ceiling lighting, toe kicks, RVs, boats, motor homes, and commercial lighting projects. Pair with an Armacost Lighting 24V power supply (required) and optional dimmer or switch for complete dimming and power control, both sold separately.

Armacost Lighting 12 Volt Potted LED Power Supplies deliver stable and energy-efficient dimming and low-voltage power to any LED light installation. The LED driver is potted for insulation plus noise reduction and cannot be removed from the enclosure.ÿ Featuring professional grade, high-performance electronics that provide smooth, flicker-free 5% to 100% LED light dimming. For the best results use Armacost Lighting LED lights, switches and AC dimming LED light controls. Suitable for both dry and damp locations.

Accessory packs to mount LED tape light channels from Armacost lighting. LED tape light channels are ideal for installations where the lighting will be visible, such as on the underside of a shelf or in a display cabinet. Accessory packs are available for corner mount, recess mount, surface mount, bendable, and u-shaped LED strip light mounting channels.

Armacost Lighting's Multicolor + White (RGB+W) RibbonFlex Pro 24 Volt Outdoor LED Strip Light Tape features advanced IP67 waterproof technology that is ideal for any outdoor LED accent lighting project, such as decks, porches, landscapes, vehicles, docks, and more. Multicolor + White LED strip light tape combines RGB (red, green, blue) color with white to product multiple color options and a pure soft white (3000K) light. IP67 tape light is 100% protected from dust and sand and protected against immersion in water between 5.9 – 39.37 inches (15cm – 1m) deep for up to 30 minutes. The 24V silicone coated LED tape light is great for longer length installations while still being energy efficient.

Adhesive light diffusers for LED strip lighting are the easiest DIY solution for smooth, dotless illumination in undercabinet installations. With quick, peel & stick adhesive backing, the frosted polycarbonate diffusion covers can be surface mounted with new or existing LED tape lighting. The smooth, easy to clean surface keeps your tape light fully encased, protecting it from dust and debris.

Worked well with my led strip of lights.. Anonymous. Baltimore, MD. Fri Apr 24 2026

RibbonFlex Pro 12 Volt White LED Strip Light Tape is part of Armacost Lighting's premium-quality component-based system, designed for custom installations. LED strips can be used as-is or cut to size as needed. Using the included tape connectors, cut strip light pieces can be securely reconnected to extend length of the installation or to go around obstacles. 12 Volt White LED tape light is ideal for variety of accent lighting applications, including above or under cabinet lighting, tray ceiling lighting, and shelving lighting. Use with an Armacost Lighting 12V power supply (required) and optional dimmer or switch, both sold separately.

Easy to work with and installed quickly. The included connectors were a big help. The wife loves them.. Robert. Queen Creek, AZ. Tue Aug 18 2020

Armacost Lighting’s RibbonFlex Pro 12 Volt White LED Strip Light Tape is the perfect LED light strip for low voltage, energy-efficient accent lighting projects. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high-quality, professional-grade components that are long-lasting and create a premium look. LED light tape is ideal for many applications including under cabinet lighting, tray ceiling lighting, toe kicks, RVs, boats, motor homes, and commercial spaces. RibbonFlex Pro LED Tape Light is part of Armacost Lighting’s premium-quality component-based system, designed for custom installations. Use with an Armacost Lighting 12V power supply (required) and optional dimmer or switch, both sold separately.

Accessory packs to mount LED Tape Light Channels from Armacost Lighting. LED Tape Light Channels are ideal for installations where the lighting will be visible, such as on the underside of a shelf or in a display cabinet. Accessory packs available for Recess & Recess Drywall Mount, Corner Mount, Surface Mount, Deep & Wide Surface Mount, and Bendable LED strip light mounting channels.

Armacost Lighting 12 Volt Potted LED Power Supplies deliver stable and energy-efficient dimming and low-voltage power to any LED light installation. The LED driver is potted for insulation plus noise reduction and cannot be removed from the enclosure.ÿ Featuring professional grade, high-performance electronics that provide smooth, flicker-free 5% to 100% LED light dimming. For the best results use Armacost Lighting LED lights, switches and AC dimming LED light controls. Suitable for both dry and damp locations.

Accessory packs to mount LED tape light channels from Armacost lighting. LED tape light channels are ideal for installations where the lighting will be visible, such as on the underside of a shelf or in a display cabinet. Accessory packs are available for corner mount, recess mount, surface mount, bendable, and u-shaped LED strip light mounting channels.

Armacost Lighting’s RibbonFlex Pro 24 Volt White LED Strip Light Tape is designed to meet the layout and installation requirements of lighting professionals and feature high-quality, professional-grade components. that are long-lasting and create a premium look.is perfect for large LED lighting projects. With an industry-leading lifespan and higher lumens output, this is the perfect LED solution for architectural LED lighting, under cabinet lighting, tray ceiling lighting, toe kicks, RVs, boats, motor homes, and commercial lighting projects. Pair with an Armacost Lighting 24V power supply (required) and optional dimmer or switch for complete dimming and power control, both sold separately.

RibbonFlex Pro 24 Volt White LED Strip Light Tape from Armacost Lighting is ideal for under cabinet lighting, tray ceiling lighting, toe kicks, architectural LED lighting, RVs, boats, motor homes, and commercial lighting projects. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature premium, professional-grade components that create a high-quality look. LED tape light can be used as-is or cut as needed for custom installations using the included tape connectors to securely reconnect cut strip pieces. RibbonFlex Pro LED Tape Light is part of Armacost Lighting’s premium-quality component-based system. Pair with a 24V power supply (required) and an optional dimmer or switch for complete dimming and power control, both sold separately.

The Armacost Lighting RibbonFlex Pro 24V Continuous LED Strip Light is the perfect solution for seamless accent lighting. Using Chip-on-Board (COB) technology, the LED strip light produces a seamless strip of light that is free of spots or breaks. These LED strip lights are designed to meet the layout and installation requirements of lighting professionals and feature high quality, professional-grade components that are longer lasting and create a premium look. COB LED light tape is ideal for many applications including above and under cabinet lighting, tray ceiling lighting, and toe kicks. They are especially perfect for installations next to shiny surfaces like counter tops or floors. Use with an Armacost Lighting 24V power supply (required) and optional dimmer or switch, both sold separately.