Tile Grout Sealers

The Armor SX5000 is a PRO-Grade solvent-based Silane Siloxane water-repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Great product for protecting concrete. Be careful with how you want to apply this product. I used a plastic container and sprayer, and this sealer literally melted the plastic/ spraying wand. I had to buy stailess steel sprayer to apply this sealer. Also, use a very good quality gloves to avoid any skin rash. It would be great if the supplier supplied MSDS sheet and warning label to not to use any plastic sprayer. Product is excellent, easy to apply! I hope it will keep my concrete in great condition for next 3-4 years.. Junaid. Edmonton, AB. Mon, 15 Sep 2025

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption, including cracking, spalling, pitting, dusting, mold, mildew, and algae growth.

Good sealer for concrete driveway. Robert. Butte, MT. Wed, 01 Apr 2026

The Armor AR350 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable low gloss surface film. The Armor AR350 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a low gloss wet-look finish. The Armor AR350 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great service and always in stock with very competitive prices too. Bob. Newark Delaware. Sun, 13 Sep 2026

The Armor S2000 is a ready-to-use sodium silicate densifier designed to increase the strength and reduce the porosity of poured concrete surfaces. It penetrates deep into the substrate where it chemically reacts to form a calcium silicate hydrate barrier within the pores that reduces and increases the strength and density of the concrete by up to 45%. It will help to reduce concrete dusting and reduce the movement of subsurface water and moisture through the concrete. The Armor S2000 is made from high-quality, non-recycled, US-manufactured resins. It is designed for unsealed concrete surfaces. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film.

It left a slight white speckle pattern on my black concrete, but worked to harden the polished concrete floors.. Max. Bishops Cove, NL. Sat, 26 Sep 2026

Ultimate nano floor finishes with nanoformulation technology - a medium sheen penetrating topical. A protective nano-thin coating that creates a durable, crystal clear finish specifically designed to bond to the micro-pores of today’s porcelain tiles, LVT, and more. This new AC technology has the easiest, safest, and fastest application in the industry, is self-leveling, and protects against spills and stains. It also enhances the beauty of any porcelain, ceramic, and LVT tile colors and patterns while leaving a desirable medium sheen finish. This will also seal the grout joints and make for easy, fast, and effortless maintenance of the floor.

This is amazing. I used it to install vinyl tile and it make the job so much easier. Simple to use and extremely affective. I highly recommend this for any job you have with vinyl flooring.. Cecelia. Watertown, NY. Fri, 12 Jun 2026

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great product. Dennis Menzo . Michigan. Wed, 30 Sep 2026

The Armor SX5000 WB is a PRO-Grade water-based penetrating water repellent sealer. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SX5000 WB is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed concrete, brick, pavers, natural stone, and porous masonry. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Satisfactory. Hedley. Thomaston, ME. Mon, 27 Jul 2026

The Armor AG BROWN SEAL is a solvent-based acrylic sealer designed to enhance, seal, and protect exposed aggregate concrete surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss brown-tinted surface film. The Armor AG BROWN SEAL is a fantastic sealer if you are looking to bring out dull and faded exposed aggregate concrete, and enhance them with a brown-tinted high gloss wet look finish.The Armor AG BROWN SEAL is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Amazing coverage for our aggregate sidewalk. The sealer not only lives up to harsh winters here in the North, but is amazingly beautiful in the summer! This is the only product we will buy for our concrete need.. Johna. Pittsburgh, PA. Sun, 10 Sep 2023

Great product!! I have used many, but I find this one to be the best!!. Dorothy. North Scituate, RI. Thu, 12 Aug 2021

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor AR500 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

The product went on exactly as described. It is working perfectly. I appreciate the care that was made in the delivery and the manufacturing of the product.. Keith. Sandusky Bay, Ohio. Tue, 30 Jun 2026

The Armor LV25 is a solvent-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor LV25 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor LV25 also doubles as a cure and seal and can be applied to new concrete. The Armor LV25 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Awesome product 2 coates and protected. I used this in the summer to seal stucco on my chimney and it really is armor against water damage. Can I give the sealer 6 stars?. Duke Of Babes. Tue, 12 Nov 2024

Great product! Highly recommend.. Shelli. Fri, 16 Jan 2026

General Finishes High Performance (HP) polyurethane is a unique finish that combines the best qualities of urethane and acrylic. This specialized blend makes it incredibly tough, durable, and water-resistant, making it ideal for high-wear surfaces like tables and cabinets. Unlike many water-based finishes, HP is formulated to resist common issues like foaming, sagging, and running. It also offers all the user-friendly benefits of a PolyAcrylic Blend, meaning it won't yellow and cleans up easily with water. Plus, it's enhanced with UV absorbers to protect the underlying stains, paints, and wood. HP is a fast-drying, low-odor, and non-flammable alternative to traditional lacquers, perfect for interior woodwork, furniture, and cabinets. With a quick 15-minute dry time and only 2-4 hours needed between coats, you can finish your projects quickly.

Ultimate Porcelain Tile Sealer with Hybrid Formulation Technology is a VOC-compliant, easy-to-use, fast-curing sealer for all porcelain tiles. Use before grouting to protect the micro-pores of porcelain tiles from staining during the grouting process and to make the grout cleanup much easier and faster. Use after installation to help keep the tiles clean, easier to maintain, and looking like new for years to come. Easy wipe-on application!

Did a wonderful job even camouflage some scratches.. Jennifer. FL. Thu, 22 Oct 2026

The Armor AR500 is a solvent-based acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AR500 is a fantastic sealer if you are looking to bring out dull and faded surfaces, and enhance surfaces with a high gloss wet look finish.The Armor AR500 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Fantastic sealer. Anonymous. Wed, 15 Apr 2026

The Armor SC25 is a fast-acting cost-effective penetrating water repellent sealer specifically formulated for white, or very light unsealed concrete surfaces. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SC25 is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed white and very light concrete. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Love it. Stef Newman. Clifton, TX. Sun, 06 Jun 2021

The Armor SC25 is a fast-acting cost-effective penetrating water repellent sealer specifically formulated for white, or very light unsealed concrete surfaces. It penetrates deep into the substrate where it chemically reacts to form a hydrophobic barrier within the pores that reduces surface water absorption by up to 95%. The Armor SC25 is made from high quality, non-recycled, US manufactured resins. It is designed for unsealed white and very light concrete. It works entirely below the surface, won’t change the look or color of the substrate, and won’t leave a surface film. By reducing surface water absorption, cracking, spalling, pitting, mold, mildew, algae, staining, and other damage and deterioration caused by surface water absorption will also be reduced.

Facile à utiliser. Paul. Boucherville, QC. Sat, 03 Sep 2022

The Armor AX25 combines two great products into one! With the AX25, you get a penetrating water repellent sealer, and a high gloss acrylic coating - all packed into one amazing product!The Armor AX25 is a solvent-based siloxane-infused acrylic sealer designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface and enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor AX25 is a fantastic sealer if you are looking to bring out dull and faded surfaces, enhance surfaces with a high gloss wet look finish, and provide superior water repellency benefits to the surface. The Armor AX25 also doubles as a cure and seal and can be applied to new concrete.The Armor AX25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

I applied the Foundation Armor AX25 to my concrete driveway this fall, and the final result is outstanding. For prep, I made sure to thoroughly degrease the entire surface first. I applied two coats using a 3/8" solvent-resistant nap roller, and it laid down perfectly with absolutely no lap marks—which is usually my biggest concern with rolled clear coats. Coverage was right on the money. It took about four gallons to get two solid coats down on a double driveway plus a 20x3 foot walkway. I rolled it out on a day when it hit 20°C (68°F), dropping down to about 7°C (45°F) overnight, and it cured beautifully without any issues. I also mixed in SharkGrip for traction. Slip-resistant additives can sometimes dull a clear coat or cause it to streak, but the AX25 maintained a brilliant, high-gloss wet look even with the aggregate mixed in. It looks amazing and cured to a hard, professional-grade finish. Highly recommended.. Jeff. Calgary, AB. Mon, 05 Oct 2026

ULTIMATE NANO FLOOR FINISH with NANO FORMULATION TECHNOLOGY - A medium sheen penetrating topical. A protective nano-thin coating that creates a durable, crystal clear finish specifically designed to bond to the micro-pores of today’s porcelain tiles, LVT, and more. This new AC Technology has the easiest, safest and fastest application in the industry, is self-leveling, and protects against spills and stains. It also enhances the beauty of any porcelain, ceramic, and LVT tiles colors and patterns while leaving a desirable medium sheen finish. This will also seal the grout joints and make for easy, fast, and effortless maintenance of the floor.

Linda. Moorefield Wv. Thu, 06 Aug 2026

Pure Silicone sealant is a specially formulated, neutral-cure, 100% silicone sealant for a variety of substrates such as ceramic tile, slate, wood, metal, glass, fiberglass, laminate, and plastic. For use as a flexible barrier between horizontal and vertical surfaces or any other changes in the plane such as expansion joints in non-traffic areas, fixtures, tub surrounds, sinks, toilets, vanities, electrical plumbing penetrations, floors, walls, and ceilings. Pure Silicone is designed for use in interior, exterior, intermittent wet and dry installations. Pure Silicone has superior elongation and flexibility for use in the change of plane joint applications.

Fine. Anonymous. Sat, 23 Sep 2023

General Finishes' Exterior 450 Stains are low VOC premium quality, exterior pigmented water-based wood stains designed for outdoor projects with vertical surfaces such as garage doors, entrance doors and furniture. Can be applied to wood, MDF, and fiberglass and are also made with more than 50% RENEWABLE RESOURCES formulated from sustainable materials that decrease the carbon footprint. These stains are not recommended for large horizontal surfaces such as decks. Exterior 450 Stains contain U.V. absorbers to protect the finish and mildewcides to slow mold and mildew growth, but will not prevent the wood from changing color in sunlight.

General Finishes Water-Based Wood Stains have high-quality pigments that produce rich, dark, uniform colors on hard-to-stain woods like maple and pine. This stain is low odor, low VOC, and noncombustible with water clean up. Looking for a “green” environment-friendly finish? These stains are now formulated with more than 50% RENEWABLE RESOURCES from sustainable materials that decrease the carbon footprint.

Ultimate porcelain tile sealer with hybrid formulation technology is a VOC-compliant, easy-to-use, fast-curing sealer for all porcelain tiles. Use before grouting to protect the micro-pores of porcelain tiles from staining during the grouting process and to make the grout cleanup much easier and faster. Use after installation to help keep the tiles clean, easier to maintain, and looking like new for years to come. Easy wipe-on application!

Good quality. Edith. Sun, 22 Dec 2024

The Armor WB25 is a water-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will protect the surface with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete.The Armor WB25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

best ever. John. North Olmsted, OH. Thu, 03 Jun 2021

Ultimate Grout Easy - This new AC Technology is a VOC Free formula designed to prevent grout from staining when applied prior to grouting and also makes for an effortless grout clean-up.

The grout appears to be very easy to use. Cheryl. Severn, MD. Tue, 08 Aug 2023

General Finishes TransTint® dyes are premium, concentrated liquid colorants engineered to blend seamlessly with a wide variety of bases, giving woodworkers unmatched flexibility when creating stains and toners. Designed for exceptional grain clarity and rich, even color saturation, TransTint® delivers a depth and brilliance that traditional wood stains simply cannot match. Unlike standard stains, TransTint® dyes penetrate deeply, amplify natural grain patterns, and offer an expansive palette of vibrant hues that professionals rely on for everything from fine furniture and cabinetry to instruments and restoration work. TransTint® dyes are compatible with a wide range of mediums including water, alcohol, shellac, lacquer, and the following General Finishes products that help you achieve professional grade color results.

The Armor LV25 is a solvent-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will darken the surface enhance any dull and faded coloring, and protect the surface with a durable high gloss surface film. The Armor LV25 is a fantastic sealer if you are looking to bring out dull and faded surfaces and enhance surfaces with a high gloss wet-look finish. The Armor LV25 also doubles as a cure and seal and can be applied to new concrete. The Armor LV25 is made from high-quality, non-recycled, US-manufactured resins. It is non-yellowing, breathable, and has low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great product, high quality and speedy delivery. Anonymous. Mon, 13 Apr 2026

Enduro-Var II is a reformulation of our original oil-modified, ambering, water-based topcoat. It replaces original Endurovar and is made with more than 70% RENEWABLE RESOURCES formulated from sustainable materials that decrease the carbon footprint and is compatible with ALL GF products. The newer environment-friendly formula dries to a lighter amber than the previous formula, is highly water-resistant, and is both sprayable and brushable.

Ultimate High Gloss Sealer- A high gloss topical protective coating that creates a durable, crystal clear finish on the slate, saltillo, concrete pavers, and more. This new AC Technology has the easiest, safest and fastest application in the industry, is self-leveling, and penetrates the substrate to protect against oil and water-based stains.

I like the product worked great. Cindy. Arcadia, FL. Wed, 09 Mar 2022

Pure Silicone sealant is a specially formulated, neutral-cure, 100% silicone sealant for a variety of substrates such as ceramic tile, slate, wood, metal, glass, fiberglass, laminate and plastic. For use as a flexible barrier between horizontal and vertical surfaces or any other changes in plane such as expansion joints in non-traffic areas, fixtures, tub surrounds, sinks, toilets, vanities, electrical plumbing penetrations, floors, walls and ceilings. Pure Silicone is designed for use in interior, exterior, intermittent wet and dry installations. Pure Silicone has superior elongation and flexibility for use in change of plane joint applications.

The Armor WB15 is a water-based acrylic sealer designed to seal and protect concrete and paver surfaces with a durable low gloss surface film. The Armor WB15 is a fantastic sealer if you are looking to enhance surfaces with a low gloss finish.The Armor WB15 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective low gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

The folks at Foundation Armor were very helpful in helping us find a low gloss sealer for our stamped concrete. We applied 2 coats and it came out looking great.. Anonymous. Pembroke New Hampshire. Fri, 05 May 2023

Exterior 450 Topcoat is a tintable clear-drying low VOC finish suitable for vertical exterior surfaces, such as fences, patio furniture, garage doors and entrance doors. It is not recommended as a deck finish. Exterior 450 is fortified with UV absorbers to stabilize and protect the integrity the finish*, and built-in mildewcides to slow mold and mildew growth.

General Finishes' Exterior 450 Stains are low VOC premium quality, exterior pigmented water-based wood stains designed for outdoor projects with vertical surfaces such as garage doors, entrance doors and furniture. Can be applied to wood, MDF, and fiberglass and are also made with more than 50% RENEWABLE RESOURCES formulated from sustainable materials that decrease the carbon footprint. These stains are not recommended for large horizontal surfaces such as decks. Exterior 450 Stains contain U.V. absorbers to protect the finish and mildewcides to slow mold and mildew growth, but will not prevent the wood from changing color in sunlight.

Enduro-Var II is a reformulation of our original oil-modified, ambering, water-based topcoat. It replaces original Endurovar and is made with more than 70% RENEWABLE RESOURCES formulated from sustainable materials that decrease the carbon footprint and is compatible with ALL GF products. The newer environment-friendly formula dries to a lighter amber than the previous formula, is highly water-resistant, and is both sprayable and brushable.

The Armor WB25 is a water-based acrylic cure and seal designed to enhance, seal, and protect concrete and paver surfaces. It will protect the surface with a durable high gloss surface film. The Armor WB25 is a fantastic sealer if you are looking to enhance surfaces with a high gloss finish. The Armor WB25 also doubles as a cure and seal and can be applied to new concrete.The Armor WB25 is made from high quality, non-recycled, US manufactured resins. It is non-yellowing, breathable, and low VOC. The protective high gloss film will reduce damage and deterioration caused by surface abrasion and water absorption including cracking, spalling, pitting, dusting, and the growth of mold, mildew, and algae.

Great product. Ron. Niagara Falls, NY. Sat, 21 Jan 2023

ARDEX TLT 700 is a one-component, high modulus, mildew resistant multi-purpose elastomeric hybrid adhesive and neutral curing sealant that hardens in reaction with moisture. ARDEX TLT 700 is extremely flexible with excellent bond strength, making it suitable for a wide range of applications. It is ideal for replacing tiles or for use as a general shower, kitchen and bathroom repair adhesive and sealant for fitting accessories such as soap holders. ARDEX TLT 700 is shrinkage free and can be used to fill movement joints. Use on interior or exterior walls and floors. ARDEX TLT 700 is ideal for bonding most construction materials, including glass, tiles, ceramics, wood, plastic and metal.

General Finishes TransTint® dyes are premium, concentrated liquid colorants engineered to blend seamlessly with a wide variety of bases, giving woodworkers unmatched flexibility when creating stains and toners. Designed for exceptional grain clarity and rich, even color saturation, TransTint® delivers a depth and brilliance that traditional wood stains simply cannot match. Unlike standard stains, TransTint® dyes penetrate deeply, amplify natural grain patterns, and offer an expansive palette of vibrant hues that professionals rely on for everything from fine furniture and cabinetry to instruments and restoration work. TransTint® dyes are compatible with a wide range of mediums including water, alcohol, shellac, lacquer, and the following General Finishes products that help you achieve professional grade color results.

General Finishes High Performance (HP) polyurethane is a unique finish that combines the best qualities of urethane and acrylic. This specialized blend makes it incredibly tough, durable, and water-resistant, making it ideal for high-wear surfaces like tables and cabinets. Unlike many water-based finishes, HP is formulated to resist common issues like foaming, sagging, and running. It also offers all the user-friendly benefits of a PolyAcrylic Blend, meaning it won't yellow and cleans up easily with water. Plus, it's enhanced with UV absorbers to protect the underlying stains, paints, and wood. HP is a fast-drying, low-odor, and non-flammable alternative to traditional lacquers, perfect for interior woodwork, furniture, and cabinets. With a quick 15-minute dry time and only 2-4 hours needed between coats, you can finish your projects quickly.

General Finishes' Exterior 450 Stains are low VOC premium quality, exterior pigmented water-based wood stains designed for outdoor projects with vertical surfaces such as garage doors, entrance doors and furniture. Can be applied to wood, MDF, and fiberglass and are also made with more than 50% RENEWABLE RESOURCES formulated from sustainable materials that decrease the carbon footprint. These stains are not recommended for large horizontal surfaces such as decks. Exterior 450 Stains contain U.V. absorbers to protect the finish and mildewcides to slow mold and mildew growth, but will not prevent the wood from changing color in sunlight.

General Finishes' Exterior 450 Stains are low VOC premium quality, exterior pigmented water-based wood stains designed for outdoor projects with vertical surfaces such as garage doors, entrance doors and furniture. Can be applied to wood, MDF, and fiberglass and are also made with more than 50% RENEWABLE RESOURCES formulated from sustainable materials that decrease the carbon footprint. These stains are not recommended for large horizontal surfaces such as decks. Exterior 450 Stains contain U.V. absorbers to protect the finish and mildewcides to slow mold and mildew growth, but will not prevent the wood from changing color in sunlight.

Ultimate High Gloss Sealer- A high gloss topical protective coating that creates a durable, crystal clear finish on the slate, saltillo, concrete pavers, and more. This new AC Technology has the easiest, safest and fastest application in the industry, is self-leveling, and penetrates the substrate to protect against oil and water-based stains.

I used this to finish our concrete outdoor bar top. Looks great!. Sheri. Altadena, CA. Sat, 15 Mar 2025

Ultimate stone sealer - designed for deep penetration and immediate application on stone, grout, masonry, concrete, and more. Forever stone sealers have been either water-based or solvent-based. Each type had its benefits. Ultimate stone sealer now includes the best benefits from both formulas… our ‘hybrid’ formula is true water and solvent blend that’s faster, safer, and easier to use than any other traditional impregnating sealer available today. It penetrates the stone, leaves a natural look finish, and provides unmatched stain protection. This new ac technology allows for an extremely low residue ‘hybrid’ formula that is easier to use, has a low odor, and is non-flammable.

Ultimate Stone Enhance & Seal Matte Finish- For use on the porous stone such as slate, travertine, flagstone, grout, masonry, concrete, and more. Intensify the colors and "depth" of your stone with unrivaled stain protection in one. Forever stone color enhancers have been either water-based or solvent-based - Each type had its benefits. Ultimate Stone Enhance & Seal now includes the best benefits from both formulas. Our ‘HYBRID’ formula is true water and solvent blend that’s faster, safer, and easier to use than any other traditional color enhancer available today. This new AC Technology allows for a fast, easy application and leaves a beautiful enhanced matte finish on all types of stones. Environmentally friendly, non-flammable, low odor ‘Hybrid’ formula.

Pure Silicone sealant is a specially formulated, neutral-cure, 100% silicone sealant for a variety of substrates such as ceramic tile, slate, wood, metal, glass, fiberglass, laminate and plastic. For use as a flexible barrier between horizontal and vertical surfaces or any other changes in plane such as expansion joints in non-traffic areas, fixtures, tub surrounds, sinks, toilets, vanities, electrical plumbing penetrations, floors, walls and ceilings. Pure Silicone is designed for use in interior, exterior, intermittent wet and dry installations. Pure Silicone has superior elongation and flexibility for use in change of plane joint applications.

Ultimate Granite Clean & Seal- New AC Technology allows for this unmatched performance of granite cleaner and sealer in-1!

Smells really good. Clean granite to a shine. Description match product.. Dionne. Scarborough, ON. Tue, 01 Mar 2022

General Finishes TransTint® dyes are premium, concentrated liquid colorants engineered to blend seamlessly with a wide variety of bases, giving woodworkers unmatched flexibility when creating stains and toners. Designed for exceptional grain clarity and rich, even color saturation, TransTint® delivers a depth and brilliance that traditional wood stains simply cannot match. Unlike standard stains, TransTint® dyes penetrate deeply, amplify natural grain patterns, and offer an expansive palette of vibrant hues that professionals rely on for everything from fine furniture and cabinetry to instruments and restoration work. TransTint® dyes are compatible with a wide range of mediums including water, alcohol, shellac, lacquer, and the following General Finishes products that help you achieve professional grade color results.