This extruded carbon filter is the most widely used carbon block device in the world and provides previously unattainable performance at the lowest price point. The filter simultaneously removes free chlorine and organic chemicals that contribute to taste and odor while providing the particulate filtration and dirt-holding capacity. The filter is optimized for applications where it performs the role of both a sediment and activated carbon filter. The extrusion process allows the production of a carbon block with more carbon, but a lower pressure drop. This enables the filter to deliver extended life while removing sediment, chlorine, taste, odor, and organic contaminants from water, aqueous solutions, or suspensions. This filter is also widely used in filtering organic solvents. The workhorse filter is ideal for use with residential and commercial water purification systems, food service, pre, and posts RO systems.

A powerful, multi-functional filter cartridge for residential and commercial water purification systems. Heavy Metals ReductionFI-PB1 extruded activated carbon filters reduce soluble lead using an ion-exchange filter medium with high specificity for soluble lead. Particulate filtration is used to intercept insoluble lead-containing particles. Standard 2.50” O.D. x 9.75” L filters will reduce lead, meeting the performance requirements of NSF Standard 53 protocol for over 2,500 gallons when operating at a flow of 0.75 GPM. Chemical AdsorptionFI-PB1 filters offer high levels of chemical reduction in potable drinking water, including chlorine and other compounds that contribute to taste and odor. Particulate, Cyst and Turbidity ReductionFI-PB1 filters provide 99.98% reduction of 3-4 µm particulates, 99.96% reduction of 1-2 µm particulates, and are high-performance sediment filters with extended life. Graded-density pre-filtration combined with high dirt capacity extruded activated carbon provide several times greater life than molded filters. Standard filters are finished with an outer polypropylene spun-bonded pre-filtration medium overlying a second polypropylene melt-blown pre-filtration medium. A protective polypropylene netting is applied to the exterior of the cartridge. Polypropylene end caps with compression gaskets fit most standard housings. FI-PB1 filters consist of activated carbon particles fused into a uniform block with enhanced adsorptive capacity and efficiency. FI-PB1 filters flow in a radial (outside-to-inside) direction, providing increased dirt capacity and low-pressure drop. Unlike granular activated carbon (GAC) filters, cartridges will not channel or bypass due to the extreme uniformity of their extruded activated carbon core.

The ultimate polishing carbon filter is an exceptional value for general applications where long life, high purity, and low change-out frequency are required. This Inline Carbon Filter can be used on icemakers, refrigerators, beverage equipment, drinking fountains, under-the-counter systems, RO systems, and in conjunction with purification systems. Cap and body are spin-welded together producing a smooth, consistent seal without the use of glues or binders that may cause contamination. The threaded connections are precision cut by the machine resulting in the most accurate and repeatable thread possible. Composed of acid-washed carbon media, this water carbon filter is designed for maximum chlorine, taste, and odor reduction.

Put the final refreshing touches on your water with the Brio stage-4 post-carbon coconut carbon replacement filter. A replacement filter that's compatible with Brio clpourosc420ro water cooler, the stage-4 post-carbon filter reduces any lingering impurities in water by using activated coconut carbon, a form of carbon that's been processed to produce a large surface area with microscopic pores. This type of filter is incredibly efficient at meticulously adsorbing chlorine, VOCs, and any remaining particulates. The Brio stage 4 filter - the final one in a thorough 4-stage filtration process - ensures your water looks great and tastes fantastic.

Reduce the chlorine taste and odor in your water with the Brio stage-2 pre-carbon granular activated carbon replacement water filter, which is compatible with Brio water-cooler model CLPOURO420SCV2 and old version clpourosc420ro. The second filter is a 4-stage filtration system, the stage-2 water filter is specifically designed to improve the taste and appearance of water, as well as capture small particulate matter and contaminants, maximizing the efficiency of the stage-3 reverse osmosis membrane. The stage-2 filter is a granular activated carbon filter and is both food-grade and B.P.A. free. The granular activated carbon, itself, is made from raw coconut shells, which are naturally high in carbon. The shells are ground up and heated to increase or activate the surface area of the carbon. The number of tiny pores on each granule increases exponentially during the heating process. And the more pores there are, the more places there are for tiny particulates to get adsorbed or trapped. An essential component to a water filtration system, the Brio stage-2 granular activated carbon pre-carbon filter will protect your entire filtration system and leave your water looking great and tasting even better.

Each PUR water filter is certified to reduce mercury and certain industrial pollutants as well as reduce chlorine (taste and odor) and more. The filter lasts up to 2 months and gives you 40 gallons (or 640 8oz cups) of cleaner, great-tasting water. PUR’s superior filter technology uses activated carbon and ion exchange media and is certified to reduce 2x more contaminants than Brita's® leading pitcher filter. The dispenser has a slim, space-saving design that fits easily in the fridge. Large 30 Cup Capacity Dispenser.

easy to assemble and fits nicely in the fridge!. Sarah H. Illinois. Thu Jun 04 2026