This is a bi-fold door guide pin assembly with a special nylon slide cap. It is used for a 11/16 in. track opening on a 1/4 in. outside diameter x 5-1/4 in. steel pin. Includes coil spring and cotter pin retainer.

This is the essential sliding pocket door hardware that brought sliding doors into the 21st century, the only complete pocket door system on the market, and is widely used throughout the industry for both new builds and refurbishments. The (soft closer in both directions-Soft Open/Soft Close) only works in conjunction with Eclisse's track and hardware and can be used with any Eclisse frame kit with a minimum door width of 24". Soft close and open with anti-slam incorporated, this is completely hidden inside of the track. This slows and softly approaches the door both during the closing as well as during the sliding into the counter-frame.

It was reasonable price and Great product .. Katherine. Oakland, NJ. Fri Jul 19 2024

This is a guide rod used in Benchmark bi-fold door systems. The 5/16 inch diameter, 5-1/4 inch long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 inch nylon cap on the end.

This is a guide rod used in Benchmark bi-fold door systems. The 5/16 inch diameter, 5-1/4 inch long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 inch nylon cap on the end.

This top guide pin assembly features a 7/16 in. diameter nylon cap. It includes a black plastic retainer sleeve and coil spring. Used by Float Away steel framed doors.

This guide rod is constructed from steel. It features a nylon constructed tip bushing and a spring-loaded design for self-adjustment. It fits on Slimfold and other similar styled doors.