This mortise cup closet door pull is constructed of stamped steel and comes finished in satin nickel. The outside diameter of this pull is 2-1/8 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Works perfectly inside the closet doors.. Karen. East Amherst, NY. Tue Apr 11 2023

This mortise cup closet door pull is constructed of stamped steel and comes finished in satin nickel. The outside diameter of this pull is 1-3/4 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Moved into a hone that had hard plastic finger pulls on every closet door that were original to the house and so yellowed. These were a godsend and made our doors look great.. Margaret. Springfield, PA. Sun May 16 2021

This mortise cup closet door pull is constructed of stamped steel and comes finished in classic bronze. The outside diameter of this pull is 2 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Will serve its purpose have yet to install.. Lorraine. Chatsworth, CA. Fri Feb 12 2021

This mortise cup closet door pull is constructed of stamped steel and comes finished in classic bronze. The outside diameter of this pull is 2-1/8 inch and it has a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.

Hard to find color combo...a bit pricey for what you get, but It is a more hard to find item. Michael. Greenfield, WI. Fri Apr 17 2020

This mortise cup closet door pull is constructed of stamped steel and comes finished in silver. The outside diameter of this pulls vary and they have a depth of 5/16 inch. These mortise cups set flush in the door and are used on by-passing closet panel doors to provide a pull for ease of opening and closing, and it they are used by many manufacturers. This item includes 2 pulls and 4 nails per package. Installation tip: to avoid damaging the pulls during installation; use a pair of needle nose pliers to hold the nails while hammering, then finish driving the nails with a nail set to seat them in place. Silicone glue may be required if the hole has worn larger.