𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄⫸ All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our return air covers are made-to-order and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐄𝐒𝐂𝐑𝐈𝐏𝐈𝐎𝐍⫸ Our metal register covers help transform a rooms appearance with minimal effort. They are designed to sit on top of the floor and can be held down by screws. The registers are black powder coated, this finish gives a protective coating that will resist staining or corrosion. With a 1/16” thickness and a well-defined cut, these registers will not only last a lifetime but will also enhance the look of any room. We include 2 steel black counter sink screws. INSTALLATION These floor vents are 1/16" thick metal with a powder coated black. -Comes with 2 holes for installation so that customers can drill them. -No dampers included. -Design size has to match the duct opening size. Predrill first our floors before installing the screws. Check video of Installation. 𝐇𝐎𝐖 𝐓𝐎 𝐌𝐄𝐀𝐒𝐔𝐑𝐄⫸ We go by the duct opening because that is the Airflow you will need. Please order by the DUCT OPENING or HOLE SIZE to ensure proper fit. Note: if your duct opening is 6x10, the overall size of the vent will be 8x12. This will allow you to have 1" border with one hole on the right and another on the left so you can drill it in your floor. If you need a custom size, please contact us. Sizes : Duct opening 4x10, Vent size 6x12 Duct opening 6x10, Vent size 8x12 Duct opening 4x12, Vent size 6x14 Duct opening 6x12, Vent size 8x14 𝐍𝐎𝐓𝐄⫸ : Our register DO NOT come with louvers or dampers box to control airflow. Since our products are made to order and are considered custom orders, we don't take any returns or exchanges unless it has been damage while shipping or for having manufacturer issues. We are not responsible for wrong dimensions given by the contractors or customers. So PLEASE double check your dimensions and / or opening area before purchase.

Sierra Grates registers, grilles & vents are crafted for beauty, durability, and design. Our floor registers are designed to fit snugly and come in different sizes for your consideration. Our beautiful designs, specially engineered dampers, and ease of installation make it a simple and effective way to upgrade your home! Constructed of durable steel and a faceplate 1.5mm thick, our vents are powder coated for a finish that can handle everyday wear and tear and still look good! Our air vent covers promise superior quality, design, and value. Beautifully made and built to last, these floor registers will add a touch of modern elegance to any room for years to come. Create a seamless look in your home with a set of vent covers that easily match existing decor. With adjustable dampers, this floor vent cover is customizable and simple to use. The dampers are not directional and successfully turn the airflow on or off. Combining quality materials and innovative design, this floral design vent cover compliments modern, clean designs in any space. It includes sturdy adjustable dampers and a beautiful, long-lasting finish that lasts for years. Control your airflow and elevate your home with this register.

These grates are sturdy, fit as described, and add vintage charm to an old Charleston SC brick house I’m renovating. I used them in every room and they retain the vintage charm yet are fresh, clean, and slightly ornate for a fresh look.. Janice. Charleston, SC. Mon Aug 18 2025

Imperial's collection series of decorative floor registers with stylish and charming templar designs. Crafted for beauty, and durability and designed to compliment trending floor finishes. 1.55mm solid steel face plate with textured powder coat painted finish. High impact polystyrene damper body is rust-proof. Adjustable multi-directional airflow.

Details make such a huge difference. Replaced generic vents in all rooms of manufactured home. People notice! Bedrooms, livingroom, bathrooms, dining room.. Sharon. Grass Valley, CA. Tue Jun 09 2026

𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄⫸ All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our return air covers are made-to-order and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐄𝐒𝐂𝐑𝐈𝐏𝐈𝐎𝐍⫸ Our metal register covers help transform a rooms appearance with minimal effort. They are designed to sit on top of the floor and can be held down by screws. The registers are black powder coated, this finish gives a protective coating that will resist staining or corrosion. With a 1/16” thickness and a well-defined cut, these registers will not only last a lifetime but will also enhance the look of any room. We include 2 steel black counter sink screws. INSTALLATION These floor vents are 1/16" thick metal with a powder coated black. -Comes with 2 holes for installation so that customers can drill them. -No dampers included. -Design size has to match the duct opening size. Predrill first our floors before installing the screws. Check video of Installation. 𝐇𝐎𝐖 𝐓𝐎 𝐌𝐄𝐀𝐒𝐔𝐑𝐄⫸ We go by the duct opening because that is the Airflow you will need. Please order by the DUCT OPENING or HOLE SIZE to ensure proper fit. Note: if your duct opening is 6x10, the overall size of the vent will be 8x12. This will allow you to have 1" border with one hole on the right and another on the left so you can drill it in your floor. If you need a custom size, please contact us. Sizes : Duct opening 4x10, Vent size 6x12 Duct opening 6x10, Vent size 8x12 Duct opening 4x12, Vent size 6x14 Duct opening 6x12, Vent size 8x14 𝐍𝐎𝐓𝐄⫸ : Our register DO NOT come with louvers or dampers box to control airflow. Since our products are made to order and are considered custom orders, we don't take any returns or exchanges unless it has been damage while shipping or for having manufacturer issues. We are not responsible for wrong dimensions given by the contractors or customers. So PLEASE double check your dimensions and / or opening area before purchase.

𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄⫸ All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our return air covers are made-to-order and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐄𝐒𝐂𝐑𝐈𝐏𝐈𝐎𝐍⫸ Our metal register covers help transform a rooms appearance with minimal effort. They are designed to sit on top of the floor and can be held down by screws. The registers are black powder coated, this finish gives a protective coating that will resist staining or corrosion. With a 1/16” thickness and a well-defined cut, these registers will not only last a lifetime but will also enhance the look of any room. We include 2 steel black counter sink screws. INSTALLATION These floor vents are 1/16" thick metal with a powder coated black. -Comes with 2 holes for installation so that customers can drill them. -No dampers included. -Design size has to match the duct opening size. Predrill first our floors before installing the screws. Check video of Installation. 𝐇𝐎𝐖 𝐓𝐎 𝐌𝐄𝐀𝐒𝐔𝐑𝐄⫸ We go by the duct opening because that is the Airflow you will need. Please order by the DUCT OPENING or HOLE SIZE to ensure proper fit. Note: if your duct opening is 6x10, the overall size of the vent will be 8x12. This will allow you to have 1" border with one hole on the right and another on the left so you can drill it in your floor. If you need a custom size, please contact us. Sizes : Duct opening 4x10, Vent size 6x12 Duct opening 6x10, Vent size 8x12 Duct opening 4x12, Vent size 6x14 Duct opening 6x12, Vent size 8x14 𝐍𝐎𝐓𝐄⫸ : Our register DO NOT come with louvers or dampers box to control airflow. Since our products are made to order and are considered custom orders, we don't take any returns or exchanges unless it has been damage while shipping or for having manufacturer issues. We are not responsible for wrong dimensions given by the contractors or customers. So PLEASE double check your dimensions and / or opening area before purchase.

-𝐈𝐌𝐏𝐎𝐑𝐓𝐀𝐍𝐓 𝐍𝐎𝐓𝐄- All covers must be ORDERED BY DUCT OPENING SIZE! Do not measure your existing cover. If you are unsure about which size to purchase, please send us a message. Our products are made-to-order in the USA and are considered custom orders; we DO NOT take any returns or exchanges unless they have been damaged while shipping or have manufacturer issues. We are not responsible for the wrong dimensions given by the contractors or customers. P.O. BOXES will NOT be accepted. 𝐃𝐞𝐬𝐜𝐫𝐢𝐩𝐭𝐢𝐨𝐧: This product includes 2 pieces. A support wood box unit is installed between the hardwood floors around the duct opening, and the decorative metal vent that “drops in” in the support box with magnets locking it safely. This allows you to change the vent for other designs if you would like something different in the future, perhaps when updating home décor. PLEASE ORDER BASED ON YOUR DUCT OPENING Each design includes the following sizes Duct opening: 4"x10", Vent size: 6"X12", Box unit: 7" x 13". Duct opening: 4"x12", Vent size: 6"X14", Box unit: 7" x 15". Duct opening: 6"x10", Vent size: 8"X12", Box unit: 9" x 13". Duct opening: 6"x12", Vent size: 8"X14", Box unit: 9" x 15". -𝐈𝐧𝐬𝐭𝐚𝐥𝐥𝐚𝐭𝐢𝐨𝐧: The register comes integrated with a box unit that makes installation easy. The box unit its ideal for ¾” thick hardwood floors but it can be custom to the thickness you need. It can be nailed in place on top of the duct opening and the wood floor installation cut around the box. The decorative metal vent is held in the box unit by magnets, making it easily removable from the box when needed. The box unit can also be stained at the same time as the floor to make it a seamless, invincible look. The installation can be done while the floor is being installed, or you can router out your hardwood floors around the opening if they have already been installed. With the included wooden support box installed around the duct opening, the decorative magnetic metal vent 1/16” thickness will drop in place. The vent is held in the box by magnets, making it easy to remove when needed. -𝐃𝐞𝐬𝐢𝐠𝐧 𝐦𝐚𝐭𝐞𝐫𝐢𝐚𝐥: The Flush metal registers will give you a seamless and invisible look between the floor and the register. Upscaling your floor to a high-quality craftsman work not only increases the elegance but also the value of your home. -𝐁𝐞𝐧𝐞𝐟𝐢𝐭𝐬: The Flush registers will give you a seamless and invisible look between the floor and the register. With a 1/16” metal thickness and a defined detailed cut, these registers will enhance the look and will last you a life time!. The metal vents are black powder coated; this finish gives a protective coating that will resist staining or corrosion. These registers do not come with Dampers or louvers to direct air flow. We currently offer these registers in 4 different sizes. If another size is needed, please contact us and we will work on your project.