Broan NuTone Steel 390 CFM Convertible Wall Range Hood with Aluminum Filter PM390

Features

• Package includes power pack grille, washable aluminum mesh filter, power supply cord, manual, and warranty.
• A durable, powder-coated silver finish and a fully enclosed bottom ensure this hood is easy to clean and will not discolor.
• The enclosed lighting area is home to dual incandescent 40-watt candelabra bulbs (sold separately).
• Heat Sentry automatically turns the blower to high speed when excess cooking heat is detected.
• A one-piece, washable aluminum mesh filter means you can maintain optimum grease capture and keep the kitchen fresh.
• Can work in an ADA Compliant situation when wired to operate from a dedicated, standard 2-rocker or 3-rocker wall switch to turn the hood on or off.
• Three-speed slide controls provide 390 CFM of exhaust at 6.0 sones.
• The choice of a 6" round duct (includes damper and adapter) or non-ducted discharge allows you to make the right installation decision for your home.
• It is recommended duct air outside. Avoid venting the exhaust air into spaces within walls, ceilings, and attics to reduce the risk of fire
• Check your venting capabilities - Check if your home has installed ductwork. If it does, or you plan on getting it installed, you should look for a ducted (vented) or convertible range hood. If your home does not have installed ductwork, you should choose a ductless (non-vented) or convertible range hood.
• Measure your space - First, measure the width of your cooking surface from one side of the cooktop to the other. Next, measure the width of the area between cabinets where your range hood will live (if applicable). Then, measure the space between the cooking surface and the cabinets or ceiling above. There should be anywhere from 24 to 36 inches between the bottom of the range hood and the cooktop surface. Finally, measure the depth from front to back of the cooking surface.