Hardwired Metal Transformers

This 300-watt pro-series transformer is supplied with a 3' grounded line cord and is epoxy encapsulated with a stainless steel enclosure. Features (12v-15v) multi-tap outputs and circuit breaker protection. A modular timer and photocell are available.

This unit very well made and easy to use / hook-up. The 300w has plenty of extra power for system growth and it looks good, too. Would go with it again. Scott. Sewickley, PA. Fri Jun 03 2016

This 600-watt pro-series transformer is supplied with a 3' grounded line cord and is epoxy encapsulated with a stainless steel enclosure. Features (12v-15v) multi-tap outputs and circuit breaker protection. A modular timer and photocell are available.

Socrates. Bloomington, IN. Wed May 27 2026

This 900-watt pro-series transformer is supplied with a 3' grounded line cord and is epoxy encapsulated with a stainless steel enclosure. Features (12v-15v) multi-tap outputs and circuit breaker protection. A modular timer and photocell are available.

works perfectly for outdoor lighting. Michael. New York, NY. Mon May 08 2017

The 300W Pro-Contractor Series Transformer makes it easy to add multiple home runs from a single unit, reducing clutter and installation time. Its angled terminal blocks provide clear visibility and effortless wire connections, while the side-swing door stays completely out of the way, ensuring quick and easy wire access. Inside, a high-efficiency toroidal core delivers lighter weight, quieter operation, and superior performance over traditional EI cores. Plus, this transformer is designed to power a complete low voltage lighting system and supports compatible fixtures and lamps operating between 9V and 15V.

Protect outdoor lighting from power surges and program exterior lights with this Standard Transformer. Features (1) 12v tap and an automatic timer in a damp-rated composite resin block. Plugged into a standard outlet, converting 120v line voltage to a safer, energy-efficient 12v low voltage for landscape lighting. Lights can be controlled by an automatic timer + photocell combo that turns on at dusk and can be set for 4hr, 6hr, or 8hr periods, and by an On/Off switch.

Only a couple weeks of use. Seems well built and solid. Works like a charm so far. I’ve got 2 lines (14 gauge) connected to the terminals.. Marcel. Houston, TX. Wed May 27 2026

Single Phase to 3-Phase Rotary Converter:The rotary phase converter generates stable three-phase power output, making it easy to start hard-to-run equipment and power multiple machines simultaneously. Built with a durable structure and integrated automatic protection, it ensures secure, efficient, and dependable operation.

Excellent quality - perfect for our outdoor lighting system!. Sharon. St Petersburg, FL. Wed Apr 25 2018

5000W Step Up Down Converter Transformer：80% Maximum Load & Output Voltage Display & Portable Design

This is a great piece of equipment. Very useful and great for protecting home or business appliances.. Anonymous. Sun Aug 16 2026

Single Phase to 3-Phase Rotary Converter:The rotary phase converter generates stable three-phase power output, making it easy to start hard-to-run equipment and power multiple machines simultaneously. Built with a durable structure and integrated automatic protection, it ensures secure, efficient, and dependable operation.

This class 2, UL & cUL listed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

I had an exterior LED light fixture that had an electronic transformer that failed. The number were not exactly the same on this replacement but the input and output specifications were the same. I received and installed it and everything is working perfectly.. Tim. Surrey, BC. Tue Mar 02 2021

Single Phase to 3-Phase Rotary Converter:The rotary phase converter generates stable three-phase power output, making it easy to start hard-to-run equipment and power multiple machines simultaneously. Built with a durable structure and integrated automatic protection, it ensures secure, efficient, and dependable operation.

The 600W Pro-Contractor Series Transformer makes it easy to add multiple home runs from a single unit, reducing clutter and installation time. Its angled terminal blocks provide clear visibility and effortless wire connections, while the side-swing door stays completely out of the way, ensuring quick and easy wire access. Inside, a high-efficiency toroidal core delivers lighter weight, quieter operation, and superior performance over traditional EI cores. Plus, this transformer is designed to power a complete low voltage lighting system and supports compatible fixtures and lamps operating between 9V and 15V.

The 900W Pro-Contractor Series Transformer makes it easy to add multiple home runs from a single unit, reducing clutter and installation time. Its angled terminal blocks provide clear visibility and effortless wire connections, while the side-swing door stays completely out of the way, ensuring quick and easy wire access. Inside, a high-efficiency toroidal core delivers lighter weight, quieter operation, and superior performance over traditional EI cores. Plus, this transformer is designed to power a complete low voltage lighting system and supports compatible fixtures and lamps operating between 9V and 15V.

Single Phase to 3-Phase Rotary Converter:The rotary phase converter generates stable three-phase power output, making it easy to start hard-to-run equipment and power multiple machines simultaneously. Built with a durable structure and integrated automatic protection, it ensures secure, efficient, and dependable operation.

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home.

worked perfectly with our undercabinet lighting;. Erica. Valhalla, NY. Wed Oct 19 2016

The Magnetix Collection is a seamless, built-in track system designed to integrate effortlessly into walls or ceilings. Its magnetic design allows lighting components to be placed anywhere along the track, offering flexible, modern illumination that adapts to your space.

The 150W Pro-Contractor Series Transformer makes it easy to add multiple home runs from a single unit, reducing clutter and installation time. Its angled terminal blocks provide clear visibility and effortless wire connections, while the side-swing door stays completely out of the way, ensuring quick and easy wire access. Inside, a high-efficiency toroidal core delivers lighter weight, quieter operation, and superior performance over traditional EI cores. Plus, this transformer is designed to power a complete low voltage lighting system and supports compatible fixtures and lamps operating between 9V and 15V.

Strong Compatibility and Versatile Applications Our 12V 60W Magnetic LED Driver with Triac/MLV and ELV dimming works with most standard dimmer switches and powers 12V LED strip lights, LED bulbs and other low voltage fixtures. It is an excellent choice for residential projects. LEONLITE LED driver is compatible with Lutron and Leviton dimmers as well as other popular brands. Easy Installation Designed for straightforward setup, the driver includes clear wiring instructions to make installation smooth. Do not surface mount. Install only in an electrical box with a volume greater than 20 cubic inches. Smooth, Flicker Free Dimming Enjoy high quality dimming from 1 percent to 100 percent without flicker. Certifications, Protections and Warranty This 12V 60W LED driver is UL, cUL and FCC listed and is rated Class 2, Class P and Type HL. Built in protection features include short circuit protection, overload protection and over temperature protection. The product is backed by a hassle free three year guarantee and our responsive after sales service. Specifications Wattage: 60W Input voltage: 120V Output voltage: 12V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Compatibility and Versatile Applications Our 24V 96W Magnetic LED Driver with Triac/MLV and ELV dimming delivers broad compatibility for residential projects. It powers 24V LED strip lights, LED bulbs, and other low voltage fixtures, and works seamlessly with most standard dimmer switches. The LEONLITE LED driver is compatible with Lutron dimmers and compatible with Leviton dimmers, as well as other popular brands. Installation Requirements and Notes Designed for straightforward installation, the driver includes clear wiring instructions to make setup simple. Not for surface mounting. Install only in an electrical box with a volume bigger than 20 cubic inches. Smooth Dimming Performance Experience stable, flicker free dimming from 1% to 100% for precise lighting control. Certifications Protections and Warranty This unit is UL, cUL, and FCC listed and carries Class 2, Class P and Type HL ratings. Built in protections guard against short circuit, overload, and over temperature conditions. Backed by a hassle free 3 year guarantee and attentive after sales support. Specifications Wattage: 96W Input voltage: 120V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Single Phase to 3-Phase Rotary Converter:The rotary phase converter generates stable three-phase power output, making it easy to start hard-to-run equipment and power multiple machines simultaneously. Built with a durable structure and integrated automatic protection, it ensures secure, efficient, and dependable operation.

Single Phase to 3-Phase Rotary Converter:The rotary phase converter generates stable three-phase power output, making it easy to start hard-to-run equipment and power multiple machines simultaneously. Built with a durable structure and integrated automatic protection, it ensures secure, efficient, and dependable operation.

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home. This fixture features separate line volt and low volt wiring compartments and is UL listed for added convenience.

Needed with tape lights along with wire.. Dorene. Kearny, NJ. Sun Dec 29 2019

Dynamic Warmth With Flexible CCT Options This driver offers Dim To Warm performance plus 7CCT support, making it ideal for tunable LED strips. As you lower the dim level the light naturally shifts to a warmer tone, and the 7CCT capability lets you select precise color temperatures according to the LED strip specification. Speedy On Site Wiring Designed for fast installation, the included junction box features a snap on terminal cover, seven knockouts, and four mounting tabs so electricians can complete clean, efficient wiring and move through job sites more quickly. Certified Durability and Built In Protection This 24V 200W LED driver is UL, cUL, and FCC listed and is rated Class P, SELV, and NEMA 4X. It includes built in safeguards against short circuit, overload, and over temperature conditions to protect fixtures and installations. Five Way Dimming for Broad Compatibility Enjoy versatile control options with Triac / 0-10V / 1-10V / PWM / Potentiometer 5-in-1 dimming. The LEONLITE LED driver is compatible with Lutron and Leviton dimmers as well as many other popular brands, simplifying integration into existing control systems. Adjustable Voltage Output and Confident Warranty Easily fine tune brightness or compensate for voltage drop with the adjustable max output from 17V to 25V. For peace of mind the product is backed by a hassle free 3-year unlimited guarantee and responsive after sales support. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC CCT: 2700K-6500K Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

3000W Step Up Down Converter Transformer：80% Maximum Load & Output Voltage Display & Portable Design

This large, heavy, powerful, quiet converter runs all of the appliances I acquired while living in Europe. As the frequency is not converted (in my case its input is 225VAC at 60Hz and its output is 250VAC at 60Hz), items with motors (such as power tools) that expect 50Hz will run faster than designed, while items with resistance (such as my Sigg Raclette grill) are indifferent. Very pleased!. Byron Matthews. Mount Airy, MD. Tue Aug 04 2026

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home. This fixture features separate line volt and low volt wiring compartments and is UL listed for added convenience.

We had to call for an install question but otherwise it was great for us!. Lisa. Las Vegas, NV. Mon Aug 22 2016

Quality product you get what you pay for.. Neville. Fountain Hills, AZ. Tue Sep 05 2017

Single Phase to 3-Phase Rotary Converter:The rotary phase converter generates stable three-phase power output, making it easy to start hard-to-run equipment and power multiple machines simultaneously. Built with a durable structure and integrated automatic protection, it ensures secure, efficient, and dependable operation.

The 75W Pro-Contractor Series Transformer makes it easy to add multiple home runs from a single unit, reducing clutter and installation time. Its built-in mechanical timer eliminates the need for additional accessories while the transformer's angled terminal blocks provide clear visibility and effortless wire connections. Its side-swing door stays completely out of the way, ensuring quick and easy wire access. Inside, a high-efficiency toroidal core delivers lighter weight, quieter operation, and superior performance over traditional EI cores. Plus, this transformer is designed to power a complete low voltage lighting system and supports compatible fixtures and lamps operating between 9V and 15V.

Weatherproof Heavy Duty Build The driver is housed in an IP65 rated aluminum enclosure with NEMA 4X protection to block moisture, dust, and corrosion. The interior is fully potted for long term stability, making it ideal for patios, yards, and enclosed lightboxes that face harsh or damp conditions. Ultra Slim Fit for Narrow Spaces An ultra slim profile allows the power supply to slip into tight signage frames, lightboxes, and architectural fixtures where space is limited. It provides a clean, hidden installation option for installers who need a low profile solution. 5-in-1 Dimming Support This LEONLITE driver supports TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming for broad compatibility across systems. It works with Lutron dimmers and Leviton dimmers as well as other popular brands. Certified Safe and Stable Output ETL listed and tested to UL standards, the unit carries Class P ratings and includes overload, overheat, and short circuit protection to reduce site risk. The aluminum housing helps dissipate heat and delivers a consistent 24VDC output for long LED strip or signage runs. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

This class 2, UL & cUL listed enclosed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Enclosure cover is easy to remove. The transformer has knockouts on three sides with clips for line voltage wiring. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

Transformer worked just as it should for our cabinet lights.. Michelle. Denver, CO. Sun Dec 31 2017

This timer is much better than the original one I had installed. It's easier to set and allows 2 (on and off) options so you can set it for early morning and night. I love the early morning setting when you need to leave for an early airline flight. Additionally, it's excellent for keeping accurate time and it's also easy to install, just plug it in.. Mary. Frederick, MD. Thu Feb 02 2017

This class 2, UL & cUL listed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

Slim Profile for Hidden Installations This ultra-slim 24V LED driver is built for tight spaces like ceilings, baseboards, and recessed walls. Its low-profile housing lets installers tuck the power supply out of sight in display shelves, cabinet lighting, and commercial millwork so wiring stays hidden and the finished look stays clean. Broad Dimming Support for Fewer Headaches The power supply accepts TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming, simplifying dimmer selection across jobs and reducing site troubleshooting. Expect smooth, flicker-free dimming across systems, and broad compatibility with Lutron, Leviton, and other popular brands. Certified Safety Designed for demanding commercial use, the driver meets UL8750 and is ETL listed, with Class 2 and Class P ratings. Built-in short circuit, overheat, and overload protection help reduce jobsite risk and support code compliance in retail, office, and architectural lighting installations. Stable 24V Output Accepting 110–277V AC input, this constant voltage driver delivers regulated 24V DC with up to 90% load efficiency, maintaining brightness over long cable runs for signage, cove lighting, and other low voltage zones. Specifications Wattage: 60W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home. This transformer is UL listed and will only add to your convenience.

For a transformer to be used with under cabinet lights. WAC Lighting is always reliable in stock availability and turnaround.. Jacquie Cao. Yonkers, NY. Sun Oct 28 2012

Slim Profile for Hidden Installations This ultra-slim 24V LED driver is built for tight spaces like ceilings, baseboards, and recessed walls. Its low-profile housing lets installers tuck the power supply out of sight in display shelves, cabinet lighting, and commercial millwork so wiring stays hidden and the finished look stays clean. Broad Dimming Support for Fewer Headaches The power supply accepts TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming, simplifying dimmer selection across jobs and reducing site troubleshooting. Expect smooth, flicker-free dimming across systems, and broad compatibility with Lutron, Leviton, and other popular brands. Certified Safety Designed for demanding commercial use, the driver meets UL8750 and is ETL listed, with Class 2 and Class P ratings. Built-in short circuit, overheat, and overload protection help reduce jobsite risk and support code compliance in retail, office, and architectural lighting installations. Stable 24V Output Accepting 110–277V AC input, this constant voltage driver delivers regulated 24V DC with up to 90% load efficiency, maintaining brightness over long cable runs for signage, cove lighting, and other low voltage zones. Specifications Wattage: 96W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%

Faster Job Site Wiring This 24V 200W LEONLITE LED driver includes a junction box with a snap on terminal cover, seven knockouts, and four mounting tabs to speed up wiring and keep installations neat and efficient on job sites. Safety Rated with Built-in Protections The driver is UL, cUL, and FCC listed and meets Class P, SELV, and NEMA 4X requirements. Built in short circuit, overload, and over temperature protection help ensure reliable, code friendly operation. Five Way Dimming Flexibility Supports five dimming methods in one unit: Triac, 0-10V, 1-10V, PWM, and potentiometer, so it integrates easily into most control systems. The LEONLITE driver is compatible with Lutron and Leviton dimmers and many other popular brands. Adjustable Output and Flicker Free Performance The maximum output voltage is adjustable from 17V to 25V for fine tuning brightness and compensating for voltage drop over long runs. Smooth dimming from 1% to 100% is achieved without flicker. Dependable Guarantee Backed by a hassle free 3-year guarantee, providing solid after sales support and peace of mind for your projects. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Pool Rated Safety UL listed and fully compliant with NEC 680.23, this transformer is built specifically for underwater lighting in pools and spas. It includes grounded metal shielding and isolated high and low voltage compartments to deliver a higher level of protection than standard landscape transformers. Automatic Circuit Protection Equipped with a built in circuit breaker, the unit automatically shuts off under overload or short conditions to help prevent shock and protect equipment. That extra layer of protection is ideal for wet areas like swimming pools, spas, and water features. Adjustable Low Voltage Output The transformer converts 120V AC into safe 12V/13V/14V outputs. The multi tap design lets you compensate for voltage drop so underwater LED lights stay bright and consistent, even on long wire runs in large pool or landscape systems. Durable Weather Resistant Housing Housed in a fully enclosed iron case, this transformer resists water, dust, and outdoor exposure for reliable performance both indoors and out. It is backed by a 12-month warranty for added peace of mind. Fast Clean Installation Wiring is flexible with 8 knockouts and 2 rubber-grommeted knockouts, plus separate high and low voltage compartments. Rear support points and the included mounting brackets make it easy to mount the unit off the wall for better airflow and a neat installation. Specifications Wattage: 300W Input voltage: AC 120V Output voltage: AC 12V/13V/14V Waterproof rating: Wet location Working temp: 5°F-104°F Material: Iron Maximum Load: 80%

Faster Job Site Wiring This 24V 96W LEONLITE LED driver includes a junction box with a snap on terminal cover, seven knockouts, and four mounting tabs to speed up wiring and keep installations neat and efficient on job sites. Safety Rated with Built-in Protections The driver is UL, cUL, and FCC listed and meets Class 2, Class P, SELV, and NEMA 4X requirements. Built in short circuit, overload, and over temperature protection help ensure reliable, code friendly operation. Five Way Dimming Flexibility Supports five dimming methods in one unit: Triac, 0-10V, 1-10V, PWM, and potentiometer, so it integrates easily into most control systems. The LEONLITE driver is compatible with Lutron and Leviton dimmers and many other popular brands. Adjustable Output and Flicker Free Performance The maximum output voltage is adjustable from 17V to 25V for fine tuning brightness and compensating for voltage drop over long runs. Smooth dimming from 1% to 100% is achieved without flicker. Dependable Guarantee Backed by a hassle free 3-year guarantee, providing solid after sales support and peace of mind for your projects. Specifications Wattage: 96W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Weatherproof Heavy Duty Build The driver is housed in an IP65 rated aluminum enclosure with NEMA 4X protection to block moisture, dust, and corrosion. The interior is fully potted for long term stability, making it ideal for patios, yards, and enclosed lightboxes that face harsh or damp conditions. Ultra Slim Fit for Narrow Spaces An ultra slim profile allows the power supply to slip into tight signage frames, lightboxes, and architectural fixtures where space is limited. It provides a clean, hidden installation option for installers who need a low profile solution. 5-in-1 Dimming Support This LEONLITE driver supports TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming for broad compatibility across systems. It works with Lutron dimmers and Leviton dimmers as well as other popular brands. Certified Safe and Stable Output ETL listed and tested to UL standards, the unit carries Class 2 and Class P ratings and includes overload, overheat, and short circuit protection to reduce site risk. The aluminum housing helps dissipate heat and delivers a consistent 24VDC output for long LED strip or signage runs. Specifications Wattage: 96W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Faster Job Site Wiring This 24V 60W LEONLITE LED driver includes a junction box with a snap on terminal cover, seven knockouts, and four mounting tabs to speed up wiring and keep installations neat and efficient on job sites. Safety Rated with Built-in Protections The driver is UL, cUL, and FCC listed and meets Class 2, Class P, SELV, and NEMA 4X requirements. Built in short circuit, overload, and over temperature protection help ensure reliable, code friendly operation. Five Way Dimming Flexibility Supports five dimming methods in one unit: Triac, 0-10V, 1-10V, PWM, and potentiometer, so it integrates easily into most control systems. The LEONLITE driver is compatible with Lutron and Leviton dimmers and many other popular brands. Adjustable Output and Flicker Free Performance The maximum output voltage is adjustable from 17V to 25V for fine tuning brightness and compensating for voltage drop over long runs. Smooth dimming from 1% to 100% is achieved without flicker. Dependable Guarantee Backed by a hassle free 3-year guarantee, providing solid after sales support and peace of mind for your projects. Specifications Wattage: 60W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Make sure you have all of the necessary components to fulfill the lighting look you desire. This 100W 120V Electronic Transformer box will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home.

Make sure you have all the necessary components to fulfill the lighting look you desire. This mini junction box is a component for the transformer accessory, providing aid for your lighting fixtures. The magnificent power will resonate brightly throughout your home.

We got this on clearance which was a plus. My husband, who is the one actually using it, says this is a good quality product.. E. Phoenix, AZ. Thu Feb 19 2015

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home.

Anonymous. Sun Dec 14 2025

The 8Trac Power Infeed is designed exclusively for the 8Trac power system, which powers our Boom Power Rail System and is required in order to make the Boom system fully operational. Please consult with your electrician before purchasing this product or other Boom Power Rail components to ensure that this system is compatible with the electrical wiring that exists within your office space.

Single Phase to 3-Phase Rotary Converter:The rotary phase converter generates stable three-phase power output, making it easy to start hard-to-run equipment and power multiple machines simultaneously. Built with a durable structure and integrated automatic protection, it ensures secure, efficient, and dependable operation.

Slim Profile for Hidden Installations This ultra-slim 24V LED driver is built for tight spaces like ceilings, baseboards, and recessed walls. Its low-profile housing lets installers tuck the power supply out of sight in display shelves, cabinet lighting, and commercial millwork so wiring stays hidden and the finished look stays clean. Broad Dimming Support for Fewer Headaches The power supply accepts TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming, simplifying dimmer selection across jobs and reducing site troubleshooting. Expect smooth, flicker-free dimming across systems, and broad compatibility with Lutron, Leviton, and other popular brands. Certified Safety Designed for demanding commercial use, the driver meets UL8750 and is ETL listed, with Class P ratings. Built-in short circuit, overheat, and overload protection help reduce jobsite risk and support code compliance in retail, office, and architectural lighting installations. Stable 24V Output Accepting 110–277V AC input, this constant voltage driver delivers regulated 24V DC with up to 90% load efficiency, maintaining brightness over long cable runs for signage, cove lighting, and other low voltage zones. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%