Class II 300W 12V Electronic Transformer EN-12300-RB2

Features

• Secondary wiring for Class 2 transformers does not require conduit sheathed cable or clamp wiring techniques
• To be used with button lights or anywhere class II power is required
• Note: Track Lighting is not universal. W.A.C. Lighting products can only be used with W.A.C. Lighting products or the warranty is void.
• 1W minimum load
• Use for all initial installations to ensure safe and primary side connections in a wiring compartment
• All connections must be made in an enclosure for proper installations
• The non-metallic sheathed cable may be used for secondary wiring in walls and ceilings
• Drop down to a smaller gauge wire if space in fixture does not permit secure connection directly with the non-metallic sheathed cable
• Built-in auto reset, soft start, short and overload circuit
• Input: 50/60Hz