Downrods & Sloped Ceiling Adapters Lighting Components

Just what we needed to hang fan on a 20" sloped ceiling!!. Francesca. FL. Tue Aug 20 2024

0 to 90-degree ceiling adapter compatible with select pendants. Electro-plated or powder-coated aluminum, brass, and steel.

Looks good - would buy this fixture again. Jk. Georgia. Sun Jun 19 2016

Small size ceiling adapter to allow you to install varieties sizes chandelier or flush mount ceiling light in narrow ceilings

I have a slanted ceiling. I bought this for the 16 globe light chandelier and it worked great.. Ed. Sat Sep 06 2025

I used this for a chandelier that I bought. Worked fine. Anonymous. Sun Sep 20 2026

Sloped Ceiling Adapter in multiple finishes, for vaulted or cathedral ceilings.

Still had a small gap from the ceiling. Kevin. Hampstead, NH. Mon Sep 08 2025

Sleek and versatile sloped ceiling mount for products to be mounted on an angled ceiling.

Mary. US. Fri Jun 20 2025

Nice . Garry. Brooklyn, NY. Mon Jul 06 2020

Electro-plated or powder-coated aluminum, brass, and steel.

Sloped Ceiling Cable Gripper

This worked perfect!! Was able to make the chandelier that we loved work on a slanted ceiling!!. Megan. Dallas, TX. Sun Mar 22 2026

This 24" Ceiling Fan Downrod maximizes your ceiling fan's cooling benefits by providing the proper height. Tapered threaded ends ensure a deeper connection and stronger bond for maximum durability. For optimum performance and safety, ceiling fan blades should be at least 7 feet from the floor but no higher than 8 to 9 feet in order to best cool a room. For ceilings 9 feet and higher, an extension down rod is required to bring the ceiling fan down to the proper height above the floor.

0 to 90-degree ceiling adapter compatible with select pendants. Electro-plated or powder-coated aluminum, brass, and steel.

A life saver for a slanted ceiling!. Lori. Oconomowoc, WI. Sat Apr 11 2026

Electro-plated or powder-coated aluminum, brass, and steel.

Perfect, just what we needed for extending our light. Easy to use and attach and matched well with the light. Isobel. Sat Sep 12 2026

0 to 90-degree ceiling adapter compatible with select pendants. Electro-plated or powder-coated aluminum, brass, and steel.

PVC constructed Concrete Pour Kit for WAC Landscape Lighting. Light fits perfectly snug into pour kit.

Just what I needed to install lighting in concrete. It is a heavy grade plastic.. Melinda. Rockwood, TN. Wed Sep 19 2018

So important for fixtures to hang properly and have stability. A must with slope ceilings. Robin. Baltimore, MD. Sat Apr 15 2017

Cal Lighting Ht Track Adopter For Low Voltage Pendant, Vertical, 12V, 50W Max W/Transformer – Designed for H-type three-wire single-circuit track systems, this vertical track adapter provides a convenient way to install compatible low-voltage pendant lighting. The durable plastic construction is available in a brushed steel finish and supports 12V lighting with a maximum capacity of 50W with transformer. Measuring approximately 5 inches long, it is ideal for living rooms, offices, bedrooms, and kitchens. Ships in one carton and requires little to no assembly.

Slope adapter kit in the Vintage Oak finish, for vaulted or cathedral ceilings

Cal Lighting Ht Track Adopter For Low Voltage Pendant, Vertical, 12V, 50W Max W/Transformer – Designed for H-type three-wire single-circuit track systems, this vertical track adapter provides a convenient way to install compatible low-voltage pendant lighting. The durable plastic construction features a dark bronze finish and supports 12V lighting with a maximum capacity of 50W with transformer. Measuring approximately 5 inches long, it is ideal for living rooms, offices, bedrooms, and kitchens. Ships in one carton and requires little to no assembly.

Cal Lighting Ht Track Adopter For Low Voltage Pendant, Vertical, 12V, 50W Max W/Transformer – Designed for H-type three-wire single-circuit track systems, this vertical track adapter provides a convenient way to install compatible low-voltage pendant lighting. The durable plastic construction features a rust finish and supports 12V lighting with a maximum capacity of 50W with transformer. Measuring approximately 5 inches long, it is ideal for living rooms, offices, bedrooms, and kitchens. Ships in one carton and requires little to no assembly.

The PP20 power pack switches the lighting load on and off utilizing our patented relay circuit protection

[This review was collected as part of a promotion.] This is a great product all around it's exactly what I needed and was made well instructions were great and had no issues with installation. After installation I uncountered no problems it works as should nice and solid piece. Cassa. Minneapolis Minnesota. Thu Aug 11 2022

Perfect match to my fans and will raise them up nicely as I have low ceilings.. Anonymous. Ohio. Sat Apr 11 2020

This item worked perfectly with my new ceiling fan!. John. Bozeman. Sat Jun 24 2023

0 to 90-degree ceiling adapter compatible with select pendants. Electro-plated or powder-coated aluminum, brass, and steel.

Perfect match with the WAC transformers. Neville. Fountain Hills, AZ. Tue Sep 05 2017

0 to 90-degree ceiling adapter compatible with select pendants. Electro-plated or powder-coated aluminum, brass, and steel.

The LEM08 emergency LED driver enables the lighting fixture to deliver a minimum of 90 minutes of illumination during a loss of normal AC power. It is UL listed for factory or field installation with indoor, damp location luminaries utilizing 20-50VDC output voltage. When normal AC power fails, the LEM08 immediately drives the LED load at the reduced light output for a minimum of 90 minutes. When AC power is present, the emergency LED driver ensures the sealed, maintenance-free, high-temperature nickel-cadmium batteries are fully charged within 24 hours after a discharge and remains fully charged until the next loss of AC power. The included test switch/pilot light provides visual and manual means of monitoring the system operation.

Versatile Lighting Solution: Delivers soft yet crisp illumination, perfect for portrait, event, and on-location photography such as weddings, proms, and corporate events.

Add an industrial look to your Steampunk Lamps, hanging lights and small chandeliers with this Wall and Ceiling Mount Bracket Pulley. To add your light cord, simply pull out the pin, remove the wheel, put your cord in the pulley and replace the wheel and pin. Pulley wall bracket is perfect to hang a light in the kitchen, a pendant lamp over the dining room table, or thread rope through the pulley for use in your work room or garage. This Vintage Style Rope Pulley Bracket measures 6 3/4" tall, 3/4" thick, and protrudes 5" from the wall or ceiling. Ceiling Mount Light Cord and Rope Pulley Steampunk Decor Bracket ships brand new with our 100% customer satisfaction guarantee.

Finally installed the two I ordered. Lifted up an empty medium size cloth suitcase which is why I purchased the bullies. Not very good. Very rarely am I disappointed in products I have ordered through Wayfair. However, this time I am VERY DISAPPOINTED !. Linda. Santa Rosa, CA. Thu Nov 05 2020

A perfect, under-stated look for our mid-century modern home! Love the square design.. Melissa. Dallas, PA. Sun Jul 26 2020

The add-on standoff adapter allows for overlapping Bola Disc groupings.

Was exactly what we needed to hang our new lighting from a sloped ceiling.. Kate. Minneapolis, MN. Mon Aug 10 2020

It’s a very pretty fan, works well with a good strong air flow and looks great in our family room!. Gail. Dripping Springs, TX. Sun Jun 14 2020

I made a great decision to buy this product comes with two I changed some of the lights to e27 multicolored spot lights and walla. Night scenes horror scenes Mood scenes. Will recommend Highly. Note pictures taken with flash did not help the cause butt look at the surrounding awesome. I give this product an awesome review any questions email me [email protected]. Hector. Kissimmee, FL. Thu Dec 24 2015

The LEM04 emergency LED driver enables the lighting fixture to deliver a minimum of 90 minutes of illumination during a loss of normal AC power. It is UL Listed for factory or field installation with indoor, damp location luminaires utilizing 20-50VDC output voltage.