Dimmable Transformers Under $250

The 120 Watt; 24 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “pop-off”. The power supply is rated up to 120-watts at 24-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Suitable for both dry and wet locations. Includes: One 120W, 24V LED Power Supply.

Powering my led undercounter lights very effectively. No flicker, no heat to speak of (using 9M of 24 VDC LED strips.. William. Mesa, AZ. Fri Jun 05 2026

The 24-Volt Universal+ Dimming LED Power Supply features a high power factor and works equally well with TRIAC forward phase and ELV reverse phase dimming. The compact and lightweight driver delivers smooth, flicker-free dimming from 0-100% with no pop-on or pop-off. With a power factor or 0.95+, the highly efficient dimmable driver meets most state regulatory requirements. Ideal for new or upgrade undercabinet LED lighting projects. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Suitable for both dry and damp locations.

Experience smooth, flicker-free brightness control of LED lighting with WaveLine Power 24-volt dimmable transformers. The low voltage AC to DC LED power supply converts standard 120V AC input into stable, low-voltage DC output for 24V LED strip lights, tape lights, puck lights, under cabinet lighting, and other low-voltage LED fixtures. Compatible with TRIAC (forward phase) dimming and most AC wall dimmer switches, this LED driver delivers consistent performance, dependable quality, and exceptional value. WaveLine power supplies are ideal for residential and commercial installations for dependable low-voltage power and consistent dimming.

Arrived very quickly. Great quality. Purchasing. New York, NY. Tue May 19 2026

This class 2, UL & cUL listed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

I had an exterior LED light fixture that had an electronic transformer that failed. The number were not exactly the same on this replacement but the input and output specifications were the same. I received and installed it and everything is working perfectly.. Tim. Surrey, BC. Tue Mar 02 2021

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home. This fixture features separate line volt and low volt wiring compartments and is UL listed for added convenience.

Needed with tape lights along with wire.. Dorene. Kearny, NJ. Sun Dec 29 2019

The Armacost Lighting; 12 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED lighting driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “pop-off”. The power supply is rated up to 60-watts at 12-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes: 1) 60W, 12V Power Supply, 1) Detachable AC Power Cord

Works great with the Armacost LED tape lights. Installed quickly with an approved brand dimmer.. Robert. Queen Creek, AZ. Wed Aug 19 2020

The Armacost Lighting 60-Watt; 24-Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on”or “pop-off”. The power supply is rated up to 60-watts at 24-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes: 1) 60W, 24V Power Supply, 1) Detachable AC Power Cord

Lisa. Kimball, MI. Mon Aug 22 2022

Enjoy the unique benefits of this magnetic, outdoor lighting solution. Perfect for landscape lighting , it's compatible with LED bulbs and offers dusk-to-dawn illumination . This product also features convenient timer and dimming capabilities.

Great power supply for 12v applications.. Robert. US. Sat Mar 26 2022

Discover precise, flicker-free dimming performance with the WaveLine 12 Volt Dimmable LED Transformer. The AC to DC LED power supply converts standard 120V AC input into stable, low voltage 12V DC output, ideal for LED strip lights, tape lights, puck lights, under cabinet lighting, cove lighting, and other LED systems. Engineered for compatibility with TRIAC (forward phase) dimming and most standard AC wall dimmers, this 24V LED transformer provides smooth brightness control from full output to low dim levels without buzzing or drop-off. WaveLine power supplies are designed for reliability, efficiency, and exceptional value.

Perfect for what I needed!. Sherry. Cordele, GA. Tue Apr 21 2026

This class 2, UL & cUL listed enclosed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Enclosure cover is easy to remove. The transformer has knockouts on three sides with clips for line voltage wiring. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

I haven’t connected this to my outdoor lights yet, but am excited to light up my small walkway with much needed light!. Karen. Gladewater, TX. Thu Dec 19 2019

This class 2, UL & cUL listed enclosed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Enclosure cover is easy to remove. The transformer has knockouts on three sides with clips for line voltage wiring. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

Transformer worked just as it should for our cabinet lights.. Michelle. Denver, CO. Sun Dec 31 2017

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home. It is also UL listed for added convenience.

Very good responses, and delivery. Robert. Aiken, SC. Mon Jul 15 2019

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home. This fixture features separate line volt and low volt wiring compartments and is UL listed for added convenience.

We had to call for an install question but otherwise it was great for us!. Lisa. Las Vegas, NV. Mon Aug 22 2016

Black plugged in Led driver with constant voltage

Feel like a big kid with these new toys.. Jerry. US. Fri Jun 21 2024

The Armacost Lighting 15 Watt; 12 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED lighting driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “drop-off”. The power supply is rated up to 15-watts at 12-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes: 1) 15W, 12V Power Supply, 1) Detachable AC Power Cord

UL & cUL listed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. WAC transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Secondary wiring for transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

These transformers allow me to use the WAC puck Zenon lights. They work well and do the job. Not really too much to them.. Izzac. El Paso, TX. Tue Sep 10 2013

UL & cUL listed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. WAC transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Secondary wiring for transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

The quality of This 60W Class II Enclosed Electronic Transformer is good. It worked out well for me and was exactly what I was expecting.. Kelly. CA. Thu Jul 03 2014

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home. UL listed and features an on/off toggle switch, this transformer will only add to your convenience.

Only place on the Web to have the part I needed. Plus quick service and a great product.. Joseph. Mon Jan 16 2023

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home.

Anonymous. Sun Dec 14 2025

This class 2, UL & cUL listed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home.

worked perfectly with our undercabinet lighting;. Erica. Valhalla, NY. Wed Oct 19 2016

This manufacturer understands the benefits of offering a complete lighting system and solution. The range of accessories is fully compatible with each of our LED products.

Make lighting your water feature or landscape quick and easy with the low voltage transformer with photocell. Aquascape low-voltage transformers provide an economical solution for operating halogen and LED lighting fixtures. The transformer includes a photocell that turns lights on at dusk, allowing you to set the lights to 4-, 6-, and 8-hour intervals. It also provides the option of manual on/off override. The transformer includes a quick-connect fitting and 25' of extension cable, making installation easier than ever. The unit is constructed of durable epoxy-sealed housing, ensuring years of trouble-free use.

This manufacturer understands the benefits of offering a complete lighting system and solution. The range of accessories is fully compatible with each of LED products.

Erin. Gaithersburg, MD. Sun Apr 02 2017

Plug In Convenience A standard US plug lets this LED driver connect directly to 120V outlets—no hardwiring required—making installs fast and simple when in‑wall wiring is impractical. Perfect for under‑cabinet lighting, LED strips, DIY projects, and rapid commercial rollouts that need time‑saving solutions. Note: For 110–277V input, hardwiring is required. Ultra Slim Profile The ultra thin design fits where most drivers cannot, slipping neatly under cabinets, inside ceilings, or behind furniture panels for a clean, concealed look. It’s built for residential and commercial jobs where limited space and finished appearance matter. Broad Dimming Compatibility This plug‑in driver supports ELV, MLV, TRIAC, 0–10V, 1–10V, PWM, and potentiometer dimming—offering rare 5‑in‑1 dimming flexibility so one unit covers a wide range of systems and reduces the need for multiple driver models. Compatible with Lutron dimmers and compatible with Leviton dimmers as well as other popular brands. See attachment for specific models. Certified Safety ETL listed and compliant with UL8750, the driver carries Class 2 and Class P ratings and includes short‑circuit, overload, and thermal protection in a compact package. Specifications Wattage: 60W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Dry Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%

24V 100W Led Power Supply 100V-240V AC to 24V DC Low Voltage LED Transformer with 24V JST Ports, ETL Listed Black Dimmable LED Driver 24V for LED Strip Lights and Cabinet Lights

100W 24V Led Power Supply 100V-240V AC to 24V DC Converter Constant Voltage LED Transformer with 24V JST Ports, ETL Listed White Dimmable LED Driver 24V for LED Strip Lights and Cabinet Lights…

Weatherproof Heavy Duty Build The driver is housed in an IP65 rated aluminum enclosure with NEMA 4X protection to block moisture, dust, and corrosion. The interior is fully potted for long term stability, making it ideal for patios, yards, and enclosed lightboxes that face harsh or damp conditions. Ultra Slim Fit for Narrow Spaces An ultra slim profile allows the power supply to slip into tight signage frames, lightboxes, and architectural fixtures where space is limited. It provides a clean, hidden installation option for installers who need a low profile solution. 5-in-1 Dimming Support This LEONLITE driver supports TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming for broad compatibility across systems. It works with Lutron dimmers and Leviton dimmers as well as other popular brands. Certified Safe and Stable Output ETL listed and tested to UL standards, the unit carries Class P ratings and includes overload, overheat, and short circuit protection to reduce site risk. The aluminum housing helps dissipate heat and delivers a consistent 24VDC output for long LED strip or signage runs. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

The 12-Volt Universal+ Dimming LED Power Supply features a high power factor and works equally well with TRIAC forward phase and ELV reverse phase dimming. The compact and lightweight driver delivers smooth, flicker-free dimming from 0-100% with no pop-on or pop-off. With a power factor or 0.95+, the highly efficient dimmable driver meets most state regulatory requirements. Ideal for new or upgrade undercabinet lighting projects. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Suitable for both dry and damp locations.

The 24-Volt Universal+ Dimming LED Power Supply features a high power factor and works equally well with TRIAC forward phase and ELV reverse phase dimming. The compact and lightweight driver delivers smooth, flicker-free dimming from 0-100% with no pop-on or pop-off. With a power factor or 0.95+, the highly efficient dimmable driver meets most state regulatory requirements. Ideal for new or upgrade undercabinet LED lighting projects. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes one power supply and one detachable AC power cord.

This class 2, UL & cUL listed enclosed electronic transformer is the perfect solution for wiring multiple low voltage fixtures. Class 2 transformers are intrinsically safer transformers because they are compartmentalized to allow no greater than 5 amps of current to be drawn on each compartment. Enclosure cover is easy to remove. The transformer has knockouts on three sides with clips for line voltage wiring. Secondary wiring for class 2 transformers does not require conduit sheathed cable or clamp wiring techniques. This transformer has a low minimum load requirement of 1W to allow the use of LED products. Maybe dimmed using an electronic low voltage dimmer.

I did not install these as I will leave it up to my electrician! Will post a photo when it is complete. Cynthia. Fairburn, GA. Fri Apr 24 2020

The Armacost Lighting 120 Watt; 12 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED lighting driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “pop-off”. The power supply is rated up to 120-watts at 12-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and wet locations. Enclosure option available. Includes: 1) 120W, 12V Power Supply

Ok not the right unit for my halogen bulbs. Gregory. Lincoln, CA. Sat Jul 26 2025

Compatibility and Versatile Applications Our 24V 96W Magnetic LED Driver with Triac/MLV and ELV dimming delivers broad compatibility for residential projects. It powers 24V LED strip lights, LED bulbs, and other low voltage fixtures, and works seamlessly with most standard dimmer switches. The LEONLITE LED driver is compatible with Lutron dimmers and compatible with Leviton dimmers, as well as other popular brands. Installation Requirements and Notes Designed for straightforward installation, the driver includes clear wiring instructions to make setup simple. Not for surface mounting. Install only in an electrical box with a volume bigger than 20 cubic inches. Smooth Dimming Performance Experience stable, flicker free dimming from 1% to 100% for precise lighting control. Certifications Protections and Warranty This unit is UL, cUL, and FCC listed and carries Class 2, Class P and Type HL ratings. Built in protections guard against short circuit, overload, and over temperature conditions. Backed by a hassle free 3 year guarantee and attentive after sales support. Specifications Wattage: 96W Input voltage: 120V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Slim Profile for Hidden Installations This ultra-slim 24V LED driver is built for tight spaces like ceilings, baseboards, and recessed walls. Its low-profile housing lets installers tuck the power supply out of sight in display shelves, cabinet lighting, and commercial millwork so wiring stays hidden and the finished look stays clean. Broad Dimming Support for Fewer Headaches The power supply accepts TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming, simplifying dimmer selection across jobs and reducing site troubleshooting. Expect smooth, flicker-free dimming across systems, and broad compatibility with Lutron, Leviton, and other popular brands. Certified Safety Designed for demanding commercial use, the driver meets UL8750 and is ETL listed, with Class 2 and Class P ratings. Built-in short circuit, overheat, and overload protection help reduce jobsite risk and support code compliance in retail, office, and architectural lighting installations. Stable 24V Output Accepting 110–277V AC input, this constant voltage driver delivers regulated 24V DC with up to 90% load efficiency, maintaining brightness over long cable runs for signage, cove lighting, and other low voltage zones. Specifications Wattage: 60W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%

Strong Compatibility and Versatile Applications Our 12V 60W Magnetic LED Driver with Triac/MLV and ELV dimming works with most standard dimmer switches and powers 12V LED strip lights, LED bulbs and other low voltage fixtures. It is an excellent choice for residential projects. LEONLITE LED driver is compatible with Lutron and Leviton dimmers as well as other popular brands. Easy Installation Designed for straightforward setup, the driver includes clear wiring instructions to make installation smooth. Do not surface mount. Install only in an electrical box with a volume greater than 20 cubic inches. Smooth, Flicker Free Dimming Enjoy high quality dimming from 1 percent to 100 percent without flicker. Certifications, Protections and Warranty This 12V 60W LED driver is UL, cUL and FCC listed and is rated Class 2, Class P and Type HL. Built in protection features include short circuit protection, overload protection and over temperature protection. The product is backed by a hassle free three year guarantee and our responsive after sales service. Specifications Wattage: 60W Input voltage: 120V Output voltage: 12V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

The Armacost Lighting 24 Watt; 12 Volt Universal Dimming LED Power Supply delivers stable and energy-efficient, low-voltage power to any LED lighting installation. The LED lighting driver is designed using high-performance, professional grade electronics that provide stable 0 or 100% dimming free of any “pop-on” or “pop-off”. The power supply is rated up to 24-watts at 12-volts. For the best results use Armacost Lighting LED lights, switches and dimming light controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations. Includes: 1) 24W, 12V Power Supply, 1) Detachable AC Power Cord

Came quickly. Wish the electrician was as fast, then well see how it works. Pam. Greeley, CO. Tue Feb 09 2021

Slim Profile for Hidden Installations This ultra-slim 24V LED driver is built for tight spaces like ceilings, baseboards, and recessed walls. Its low-profile housing lets installers tuck the power supply out of sight in display shelves, cabinet lighting, and commercial millwork so wiring stays hidden and the finished look stays clean. Broad Dimming Support for Fewer Headaches The power supply accepts TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming, simplifying dimmer selection across jobs and reducing site troubleshooting. Expect smooth, flicker-free dimming across systems, and broad compatibility with Lutron, Leviton, and other popular brands. Certified Safety Designed for demanding commercial use, the driver meets UL8750 and is ETL listed, with Class 2 and Class P ratings. Built-in short circuit, overheat, and overload protection help reduce jobsite risk and support code compliance in retail, office, and architectural lighting installations. Stable 24V Output Accepting 110–277V AC input, this constant voltage driver delivers regulated 24V DC with up to 90% load efficiency, maintaining brightness over long cable runs for signage, cove lighting, and other low voltage zones. Specifications Wattage: 96W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%

Faster Job Site Wiring This 24V 60W LEONLITE LED driver includes a junction box with a snap on terminal cover, seven knockouts, and four mounting tabs to speed up wiring and keep installations neat and efficient on job sites. Safety Rated with Built-in Protections The driver is UL, cUL, and FCC listed and meets Class 2, Class P, SELV, and NEMA 4X requirements. Built in short circuit, overload, and over temperature protection help ensure reliable, code friendly operation. Five Way Dimming Flexibility Supports five dimming methods in one unit: Triac, 0-10V, 1-10V, PWM, and potentiometer, so it integrates easily into most control systems. The LEONLITE driver is compatible with Lutron and Leviton dimmers and many other popular brands. Adjustable Output and Flicker Free Performance The maximum output voltage is adjustable from 17V to 25V for fine tuning brightness and compensating for voltage drop over long runs. Smooth dimming from 1% to 100% is achieved without flicker. Dependable Guarantee Backed by a hassle free 3-year guarantee, providing solid after sales support and peace of mind for your projects. Specifications Wattage: 60W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

Make sure you have all of the necessary components to fulfill the lighting look you desire. This electronic transformer will aid in keeping your lovely W.A.C. light fixtures shining brightly and beautifully throughout your home. This transformer is UL listed and will only add to your convenience.

For a transformer to be used with under cabinet lights. WAC Lighting is always reliable in stock availability and turnaround.. Jacquie Cao. Yonkers, NY. Sun Oct 28 2012

Black plugged in Led driver with constant voltage

Professional-grade 12V dimmable LED driver with potted enclosure for reliable, flicker-free dimming. Supports Forward-Phase, Reverse-Phase, ELV, MLV, and Triac dimming. Energy-efficient power supply for residential and commercial LED installations in dry and damp locations. Delivers smooth 0-100% dimming performance with Armacost Lighting LED systems.

Faster Job Site Wiring This 24V 200W LEONLITE LED driver includes a junction box with a snap on terminal cover, seven knockouts, and four mounting tabs to speed up wiring and keep installations neat and efficient on job sites. Safety Rated with Built-in Protections The driver is UL, cUL, and FCC listed and meets Class P, SELV, and NEMA 4X requirements. Built in short circuit, overload, and over temperature protection help ensure reliable, code friendly operation. Five Way Dimming Flexibility Supports five dimming methods in one unit: Triac, 0-10V, 1-10V, PWM, and potentiometer, so it integrates easily into most control systems. The LEONLITE driver is compatible with Lutron and Leviton dimmers and many other popular brands. Adjustable Output and Flicker Free Performance The maximum output voltage is adjustable from 17V to 25V for fine tuning brightness and compensating for voltage drop over long runs. Smooth dimming from 1% to 100% is achieved without flicker. Dependable Guarantee Backed by a hassle free 3-year guarantee, providing solid after sales support and peace of mind for your projects. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Wet location Working temp: -4°F-113°F Material: Aluminum alloy Maximum Load: 90%

The Armacost Lighting Universal Dimming 24V LED Driver provides steady low voltage power to LED lighting installations. The energy-efficient LED power supply is designed using professional, high-performance components that provide stable 0% to 100% dimming free of any “pop-on” or “drop-off”. For the best results use with Armacost Lighting LED strip lights lights, puck lights, switches and dimming controls. Plug-in or hardwire with detachable AC power cord. Suitable for both dry and damp locations.

The 12-Volt Universal+ Dimming LED Power Supply features a high power factor and works equally well with TRIAC forward phase and ELV reverse phase dimming. The compact and lightweight driver delivers smooth, flicker-free dimming from 0-100% with no pop-on or pop-off. With a power factor of 0.95+, the highly efficient dimmable driver meets most state regulatory requirements. Ideal for new or upgrade undercabinet lighting projects. For the best results use Armacost Lighting LED lights, switches, and dimming light controls. Plug-in or hardwire with a detachable AC power cord. Suitable for both dry and damp locations. Includes one power supply and one detachable AC power cord.

Slim Profile for Hidden Installations This ultra-slim 24V LED driver is built for tight spaces like ceilings, baseboards, and recessed walls. Its low-profile housing lets installers tuck the power supply out of sight in display shelves, cabinet lighting, and commercial millwork so wiring stays hidden and the finished look stays clean. Broad Dimming Support for Fewer Headaches The power supply accepts TRIAC, ELV, 0-10V, 1-10V, PWM, and potentiometer dimming, simplifying dimmer selection across jobs and reducing site troubleshooting. Expect smooth, flicker-free dimming across systems, and broad compatibility with Lutron, Leviton, and other popular brands. Certified Safety Designed for demanding commercial use, the driver meets UL8750 and is ETL listed, with Class P ratings. Built-in short circuit, overheat, and overload protection help reduce jobsite risk and support code compliance in retail, office, and architectural lighting installations. Stable 24V Output Accepting 110–277V AC input, this constant voltage driver delivers regulated 24V DC with up to 90% load efficiency, maintaining brightness over long cable runs for signage, cove lighting, and other low voltage zones. Specifications Wattage: 200W Input voltage: 110-277V Output voltage: 24V DC Dimming range: 1%-100% Waterproof rating: Damp location Working temp: -4°F-113°F Material: Plastic Maximum Load: 90%

24V dimmable LED driver with potted enclosure from Armacost Lighting delivers professional-grade dimming control. Features Forward-Phase, Reverse-Phase, ELV, MLV, and Triac compatibility for seamless 0-100% flicker-free dimming. Stable, energy-efficient power supply for any low-voltage LED installation. Sealed potted design ensures durability in dry and damp environments. Pairs perfectly with Armacost Lighting LED lights and dimming controls.