Quayle Iron Wall Light (Set of 2)

Features

• Override mode(night): At setting this mode, the light will turn on 100% brightness and stay on for approximately 8 hours. It will go back to auto-mode after 8 hours or at dawn. Ideal for family events or holidays.
• 3 modes can be interchanged by your switch or power. If more than one light fixture is controlled by the same switch, please ensure that the mode of each fixture is synchronized. So we suggest setting the fixtures to the same mode before installation.
• The light fixture is compatible with an E26 incandescent bulb or dimmable LED bulb (suggest A19 or Edison bulb), please note that non-dimmable LED isn't compatible.
• Wide detective range: With a sensing distance of up to 40 and a detection angle of up to 220°, the light fixture turns a dark space into a bright lighting space. For better performance, please install the light at least 6 feet from the ground.
• Weather resistant: With a two-tone powder-coated black and woodgrain finish, the wall light is rated for wet locations and perfect for outdoor spaces such as the courtyard, garage, front porch, deck, etc.
• Auto mode(dusk; dawn): With a photocell sensor, the light will turn on low-level 30% brightness at dusk. When motion is detected, the light will turn to a high level of 100% brightness. It will turn off at dawn. Auto mode(energy; saving): Energy-saving in this mode. The light will not turn on at dusk. Only when motion is detected, the light will turn to high-level 100% brightness. It will automatically turn off at dawn.