Chehabi Rectangular Metal Outdoor Dining Table

Love this Table, perfect!

Just what I wanted. I wanted aluminum as it won't rust and if aluminum were to oxidize it can be refinished easily with fine grit sandpaper and then repainted. The table is heavy enough for stability but easy enough to move if you want. I purchased benches for this table. During the assembly process I did grease the bolts before snugging up (snug, not tight Hercules) and used my own tools rather than the skinny wrench provided. I did make one modification and that was in the table support to underneath table attachment. There is a weld threaded in the middle that the table support sits on (table is upside down for assembly) and then you bolt the pieces together. The weld is not flush with under table surface making the support rock and placing a lot of stress on the weld when you tighten. I placed hard rubber strips around the weld distributing the force around the weld. Rubber strips were thicker than the weld itself.

Love this table! It was easy to put together and sturdy. Looks great on our deck.

This was a bad purchase. I returned the first one and the second was even worse!!!

Not Happy, holes don't line up for support bar,scratch in table top, base legs completely uneven. I'm sending it back. Too much money for a table with 3 different issues.

The first table we received came with misaligned holes so we were unable to attach the legs. Wayfair customer service was able to send a replacement at no charge. The second table only took about 10 min to put together. It seems sturdy to hold up in our Michigan climate. Finding the matching bench was tricky because it is called the Oyler bench, but it is a perfect match.

This is a great table. We have a small rooftop deck so we needed a very specific size to fit the space. Others mentioned it’s small but that’s why I love it! We also had no issues putting it together - did not need to add or adjust any holes so maybe we just got lucky! Took about 30 min by myself. Can seat 4-6. For now we have 4 chairs but we could add two more on the end. Plenty of room to add head chairs to the table with the overhang. Overhang is about 8”. Our table is directly in the sun so yes it’s gets pretty hot because it’s metal but we have an umbrella for shade. I also bought a plastic sheet to cover the top. Stabilization bar is approximately 13” off the ground when trying to buy an umbrella stand. Very happy with this purchase!

The Amauli Table looks great! It's a bit darker than I expected which was a good thing. It's a dark neutral gray on the warm side. I bought this for its styling as well as the fact that it's narrow for a 6 person table. Like others have said, some of the holes on the brace did not align, and we had to drill new holes. Otherwise, the assembly is relatively easy. I also ordered the Oyler bench. I wasn't sure it was a match because the names are different. It would be helpful if it was more obvious that it's a companion piece. I will see how it wears, I plan to cover when it's not in use. Happy so far.

It’s a nice looking table when matched with the Oyler Bench, but I was hoping for something a bit more substantial. The table top seems a bit undersized, a couple inches wider would give people sitting at the table more leg room and not have to scrunch up to the table top. There’s already some scratches, but since it lives outside that’s to be expected, but still unfortunate.

This table is easy to move and is light weight. I wanted a narrow table to fit on our patio. This table was the perfect size. Not as wide as most tables. Still seats six just fine. Looks great. Love that it will not rust.