Brushed Nickel Triple Track Bypass Sliding Barn Door Hardware Kit (for Door Thickness 1-1/4in ~ 1-3/8in), Three 4ft Long Flat Tracks, for Three Interior Doors (Doors not Included）

Features

• Three-door full bypass system. A true triple bypass consists of three individual tracks where each door can slide on its track independently. All three doors can overlap 100% and can slide from one end to the other with no limitations or interference.
• Track 8ft and under is only one piece track. For the one piece bar, the spacing between two mounting holes is 16 inches. Track 9ft and above are connected by 2 or 3 tracks using a junction plate, so the spacing between the holes where the bars connect is not 16 inches, and a header board is needed.
• Minimal gaps. Triple Bypass would give you an immediate thought of a "BIG GAP" bypass system, but our upgraded triple bypass system now has minimal spacing between each door. For example, when a standard door thickness (1-3/8 in) is used, the gaps between each door will range from 1 to 1 1/2 in. The gap between the front face of the outer door and the wall is now about 8 inches compared to our previous system, which was 11 inches. Now that the doors are close to one another, this brings you optimal privacy.
• Larger, more accessible opening. Compared to our double-track bypass and our previous triple bypass, this system offers a larger available opening. For example, if our triple bypass is applied in a setup with no available wall space, this hardware provides 2/3 of the opening size once the doors are stacked and pushed to one side.
• Easy to install. Our bracket has been upgraded; therefore, finding bracket hole placements and aligning tracks are no longer needed. The steps for installation have been reduced due to the brackets being mostly pre-assembled. You will also receive a step-by-step installation manual with U.S. standard measurements, simple instructions, and informative diagrams.