White Plastic Sliding Door Lock With Brushing Primeline U 9868

The Lumley Pendant brings a touch of urban edge to traditional spaces with a compact, dome-shaped shade and a clean metal frame. An adjustable hanging length lets you fine-tune the drop and makes it especially striking when you group multiples at staggered heights over a kitchen island or in an entryway.

Beyond beautiful! these are amazing. They are larger in scale than what they appear in this photo where they are being used as a night table lamp. They have a cafe vibe to them and look very rich. They give a beautiful golden glow. perfect to read by and to hang out by. But they are not extremely bright lights b/c of the large hood. So, plan on having alternative lighting if you need the room to be bright. Gorgeous lights!. Cami. Hagerstown, MD. Wed Jun 10 2020

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Dianna. North Vancouver, BC. Mon May 22 2023

This is an extruded aluminum sliding doorkeeper. It is surface mounted for hook-style latches. The dimensions are 2-1/2 in. in length, with a 1-1/2 in. width. It is used by Viking doors.

This sliding closet door bottom guide is constructed of plastic and comes white in color. Each bottom guide mounts with 2 fasteners and they are designed to accommodate 1-3/8 in. bypassing closet doors. This pack supplies 2 pairs of by-passing doors, or one 3-panel door system. The mounting holes of these floor guides are spaced apart at 4-3/16 in. from center to center, and they feature 1-1/8 in. tall supports. These bypassing sliding closet door bottom guides are easy to install and are used by a variety of closet door manufacturers.

Hi This is a good design for bi-fold doors with good spacing between doors. Ed. FL. Sun Jun 09 2024

This is a white flush mounted handle and latch set used by many patio door manufacturers. It has a steel hook latch with 1 inch standard spacing. This handle set will fit a minimum door thickness of 15/16 inch and up to a maximum thickness of 1-1/8 inch. It is 5-11/16 inch long and 7/8 inch wide with 5-1/8 inch mounting holes. Made of diecast metal, the handles fit flush into the screen door frame with an inside automatic locking feature.

was easy to install.. Gerald. Sacramento, CA. Sat Jun 28 2025

The Prime-Line C 1226 Diecast Sliding Door Handle Replacement Set includes four different latches with different hook lengths to accommodate most popular flush lock punch-outs. It is non-handed allowing it to be used on both left and right-handed glass sliding doors. This glass sliding door handle replacement set fits all popular flush lock punch-outs using a 6-5/8 inch hole center spacing, and it is used to replace damaged or missing flush mounted hook style handle sets on sliding glass doors ranging from 1 inch to 1-1/8 inch thick. Designed to last for everyday use, the sliding glass door handle set features a diecast construction with a white finish. This item includes installation instructions and all the fasteners necessary for the installation of this handle set, including the 2-11/16 inch keeper that mounts on the jamb. To ensure this handle works for you, match the style and type of locking mechanism as well as the measurement of the mounting hole centers (from center-2-center) to your door.

This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in a white finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.

This window guide is constructed from nylon. It features a snap-in design and helps keep your windows energy efficient. Used on Pacific, old-style windows.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

Has your sliding screen door handle broken, cracked, or worn out? Restore security and function with this replacement sliding screen door handle and latch set. Designed for both left- and right-hand sliding screen doors, this non-handed handle set fits 1/2 inch extruded and roll-formed doors with 3 inch mounting hole centers. Each set includes an inside pull, outside pull with an integrated steel latch, and mounting hardware for a quick and easy installation. The latch measures 2-13/16 inch long with a 1/2 inch projection and slides vertically to engage Prime-Line keeper A 148 (not included). Constructed of durable black plastic housing with a corrosion-resistant steel latch, this handle set provides a long-lasting, reliable replacement to keep your sliding screen door secure and functional.

Franca. Manotick, ON. Mon Apr 07 2025

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. This is a surface-mounted, cross-bolt locking device

This sliding patio door keyed locking unit by Prime-Line Products is constructed of diecast and comes in a corrosion-resistant, white-painted finish. This locking device is designed to convert non-locking Prime-Line patio door handle sets (model number: C 1174, C 1176 and C 1178) to keyed locking handles. This lock features a 5-pin tumbler with 2 keys. The lock body is solid brass construction with a hardened break-away tailpiece. Use to replace damaged key cylinders in most surface mount handles.

This sliding door handle set is constructed from die-cast and comes finished in white. It features inside and outside pulls with a thumb lever and a reversible handle. This handle set is mortise style and uses E-2000 to the key lock.

Perfect size replacement. Mary. US. Thu Jun 22 2023

This is a sliding window lock that is keyed and securely locks window in closed or ventilating position. Securely locks window in closed or ventilating position.

Surface-mounted closer is fully rust and weather resistant making it suitable for exterior use. A single torsion spring is ideal for swinging screen doors and pool gates up to 57 lbs. (26kg) with an adjustable closing speed. Neat, compact, and durable white-painted housing is made of diecast zinc. Reversible handing. Do not overtighten, turning past 4 hole positions will cause this item to fail.

This adhesive-backed weather-stripping is constructed of dual fin protective barriers that are woven down the center of the pile material. This weatherseal weatherization product highlights the insulating benefits of Owens Corning's Air Sealing Technology which are designed to resist air, water, sound, mold, mildew, dust and insects from entering the home. This item can be used on virtually every door and window in a residence to improve the energy efficiency of the home by sealing the gaps and leaks around the doors and windows which allow outside air to enter, and inside conditioned air to escape. Most energy experts agree that a properly weather-stripped home will pay for the cost of weatherizing in energy savings in less than one season alone. Replacement is easy with this backer because it features an easy-2-install, peel-n-stick application that is designed to simplify your weather-sealing projects with an effectively sealed perimeter around your windows and doors. This pile weatherstrip comes in with a Lifetime Warranty, and it's guaranteed not to break down like other felt and foam tape weather seal products. This patented installation system allows for easy installation without the need to remove window parts or glass.

Kristy. Sun Jul 05 2026

"The Prime-Line C 1253 Sliding Patio Door Handle is a non-keyed slide door handle replacement. It is reversible for use on left or right sliding patio doors. Use the sliding door handle replacement to replace or upgrade the slide door handle on a variety of patio doors. The door handle hook has a diecast inside and outside pull. The hook latch is constructed of steel. The sliding glass door handle set has mounting holes 4-15/16 inch on center. The hook and handle fits 1-1/4 inch to 1-3/8 inch thick doors. Mounting hardware included. A Phillips head screwdriver is required for installation. Please refer to the line art and compare to your needs before purchasing.

It looks way better then our old handle.. Anonymous. South Carolina. Tue Apr 19 2022

These are white plastic pull tabs. They have a 1/4 inch span x 15/16 inch width x 1-1/16 inch height. Designed to install in the channel and aid in removal of window screen. Installed under the screen spline in the channel

The Prime-Line C 1194 Diecast and Wood Patio Sliding Glass Door Handle is an internal locking, hook style handle set and is non-handed allowing it to be used on both left and right-handed patio sliding doors. This sliding glass door handle set features an automatic unlatching option designed to prevent accidental lockouts, and it is used to replace damaged or missing internal locking hook-style handle sets on a majority of sliding glass doors. This glass sliding door handle set is constructed of mixed materials including wood and diecast components. The outside non-keyed locking pull and the inside support of the handle for sliding glass door are constructed of diecast and come finished in a white-painted color. The inside pull of the handle hardware set for sliding glass door is made of natural wood and is finished in a smooth, clear finish. The sliding glass door handle replacement is designed to fit 1 inch thick internally latching type doors using a 3-1/2 inch hole center spacing. Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.

Finally hardware that fits old sliding doors!. Marine. Bal Harbour, FL. Tue Nov 19 2024

If your sliding glass door handle is old, damaged or missing, don’t get a brand new door – just replace the door handle! This non-keyed Sliding Glass Door Handle Set makes the DIY project a breeze. Installation is quick and easy, all fasteners necessary are included, and the set is non-handed, allowing it to be used on both left and right-handed patio sliding doors. It is a clamp style with a surface mount and fits 4-15/16 inch hole spacing. The handle set fits on doors measuring 1 to 1-1/2 inch thick. If mounting on thicker doors, longer screws need to be purchased separately. The door handle set is constructed of diecast materials with a painted black finish, perfect for your black sliding door. Installation is quick and easy! Instructions and all fasteners necessary for the installation of this sliding door handle set are included in packaging. Due to the surface mounting, no mortising is required. The outside non-keyed pull is different in shape than the inside pull, and it can be changed to a locking outside pull using Prime-Line’s model numbers E 2000 or C 1120 (purchase separately). *Product Selection Tip: Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.

It was perfect and super easy to install on my own. The old lock had broken so I just needed a replacement for my old sliding glass door.. Anonymous. Wed Sep 20 2023

These shower door guides are constructed from white molded plastic. They are used to keep your shower doors properly aligned. They come complete with fasteners for a quick and easy installation.

These Truth Hardware Sash Locks by Prime-Line Products are constructed of high pressure, corrosive resistant, diecast zinc and they come in a white baked-enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The mounting holes are spaced apart evenly, and they feature backset holes. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. These locks are easy to install and used by many.

This nesting operator crank handle and cover are designed for use on Truth Entrygard casement and awning window operators with 11/32 inch spindles. The crank handle is constructed of diecast zinc and it comes in a white enamel finish. Engineered to resist rust and corrosion. The operator cover is constructed of molded plastic, and it features a sleek nestling design to cuddle the folding crank resulting in a 1-3/4 inch low-profile projection. This style of cover and folding crank surpasses others where obstruction of window coverings is an issue, This operator cover also conceals the operator hardware. The window crank features a set screw at the base of the handle allowing it to lock onto the spindle, and a swivel knob at the tip for ease of operation. Overall reach on this crank extends out 4-1/8 inch when in use, and both the operator crank handle and cover are easy to install.

These bottom mounted door guides help to keep your bypassing doors on track. They feature a snap-in design that makes for easy installation. Designed for steel frame bypassing doors. Fits Cox brand doors.

This is a patio door deadbolt lock. Considered as one of the industry’s most effective, high-security locking devices, this lock is a must-have to reinforce the security of your patio sliding door. Both new and experienced burglars always look for the most vulnerable entry point to break into a home, preferring doors and windows that are out of view and equipped only with factory-installed locking hardware. Patio sliding doors fit that description, and most criminals know that a manufacturer’s locking hardware can be breached. Adding this high-security locking device to a sliding patio door will significantly reduce the burglar’s chances of success. Aggressive home invaders arrive with pry bars of different types to force a sliding door open by prying, spreading and lifting the active panel to disengage, stock door locks. Fortunately, for both homeowners and renters, this lock provides over 1,000 lbs. of forced entry-load tension to help stop them. Use of this patio door deadbolt lock will keep your family safe and secure, from not only the would-be burglars, but also the little ones who sometimes try to get out. Too often do small children become victims of the dangers that exist on the exterior side of easy-to-open patio doors, but use of these door locks mounted at heights above their reach will help ensure their safety. Child-proofing your patio door with this lock will help prevent them from accessing swimming pools, large pets, ungated yards, and many other potential dangers. This lock is constructed of an extruded aluminum housing and keeper bracket, dual steel bolts and other plastic components. The lock body mounts on the face of the active panel with four fasteners, and the keeper bracket mounts inside the jamb with three fasteners. This lock features a sleek, low-profile design with white-painted metal and black plastic components. It features a double-locking action mechanism and it is easy to install with a few simple tools. Installation fasteners

These are spline channel pull tabs. Constructed of white plastic. Designed to fit 5/16 in. and 3/8 in. screen frames. Allows for frames to be removed from windows easily for cleaning.

This white finish patio door handle is a surface with hook latch style. Often found on older patio doors, it mounts on the door's inside frame and the hook latch catches the keeper mounted on the jamb.

This white diecast outside handle can replace a multiple outside handles. It will fit most applications that require any of the following mounting holes of 3 in., 3-1/2 in., 3-15/16 in., 4-15/16 in., 5-5/8 in. or 6-7/8 in. on center. It can be keyed with installing the Prime-Line part E 2000 key cylinder. Minimum and maximum door width of 1 in.

Arrived quickly and has a nice weight and feel to it. Would have given it 5 stars but my only complaint is the hardware included is only 2” and were way too short to be able to fit through the existing handle and door frame. Would have been. I e to have a couple of screw size options. So make sure to have extra on hand of various sizes, I needed 2 12” (8-32) to be able to actually install the handle. Happy with price, quality and, once I had the right hardware, easy to install. Would recommend.. River. Hazelton, BC. Tue Jul 19 2022

This white finish patio door handle is a surface with a hook latch style. Often found on older style patio doors, it is mounted on the door's inside the frame and the hook latch engages the keeper mounted on the jamb. It has a 7/8 in. low handle height. It is a white extruded aluminum inside handle with an anti-lift feature on the hook latch. The hook latch has a 7/16 in. profile. Mounting holes are 4-15/16 in. on center. It can be keyed by installing Prime-Line part E 2071.

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a white-painted finish. It is a left-handed lock and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with its keeper and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Thu Jul 17 2025

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This patio door handle set has matching inside and outside pulls. It features a white finish that is non-handed and used by a variety of manufacturers. This is a low profile non-keyed handle set.

This is a reversible, anti-lift window and door lock. It securely locks your window or door in palace to allow both ventilation and also helps preventing the window or patio door from being lifted out of the track. Each is constructed from extruded aluminum and then the body is painted white. They are easy to put in place and secure with the included thumb screw. Order yours today.

These bi-fold door guide caps are constructed of plastic and come 25 per pack. These replacement caps slide onto the tops of bi-fold guide rods to allow for smooth operation of doors. Use these caps to replace any worn or missing caps of matching dimensions to repair any poor, or rough-operating bi-fold doors. These caps are easy to install and used by many.

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Wed Feb 01 2023

This is an aluminum latch bolt guard plate, used for both inswinging and out swinging interior and exterior doors. These latch bolt guards help protect against an unwanted forced entry by reinforcing the jamb and bolt area. The inswing application will require some mortising to your jamb, while the outswing application should not require any mortising to your jamb, however, each door may be different.

Racicot. Lauderdale Lakes, FL. Sat Jan 06 2024

This sliding patio door handle set is constructed of diecast and features a keyed exterior pull. This handle set is a flush mounted, hook style handle set and it is non-handed allowing it to be used on both left and right-handed patio sliding doors. This handle set fits all popular flush lock punch-outs using a 6-5/8 in. hole center spacing, and it is used to replace damaged or missing flush mounted, hook style handle sets on sliding glass doors ranging from 1 in. to 1-1/8 in. thick door frames. This item is packaged complete with a keyed cylinder lock, 2 keys and 4 different hook lengths. Installation instructions and all fasteners necessary for the installation of this handle set are included in packaging, including the 2-11/16 in. keeper that mounts on the jamb. Product selection tip: besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

Has the roller on your screen door damaged or missing? This is a roller is used on bottom mount installations. It is a 1-1/4 inch high density polyethylene roller with a 3/8 inch axle hole. The 1/4-20 x 3/4 inch carriage bolt inserts into the 3/8 inch diameter high density polyethylene bushing which allows the roller to turn on the bushing/axle smoothly. The carriage bolt is then secured in the bottom rail with a nut. Order your roller replacement now to repair your sliding screen door.

The Prime-Line Sliding Glass Door Handle Set is soundly constructed to ensure its reliability and overall longevity. The non-keyed replacement sliding door handle mounts on the inside frame of an older style door and latches onto an extrusion on the jamb. Easily convert the slide door handle replacement into a keyed cylinder lock to increase the handles functionality and security features. Constructed from diecast extruded aluminum, the sliding door handle replacement comes finished in a stylish finish with woodgrain accents. The handle is the ideal choice for the discerning homeowner looking to enhance their doors style and flair. The handle is a 2 inch tall inside handle. The latch clamp of the handle set has a 1/4 inch profile and 1/2 inch projection when in locked position.

Great fit so glad to be able to fix my door!!!. Judy. Memphis, TN. Sat Mar 04 2023

Standard reversible surface mount for left or right-handed mortise-locking doors that have 3-15/16 on center mounting holes. The diecast inside pull has a wood handle, diecast thumb turn, and steel latch activator. The outside pull is diecast and keyed. A mortise lock is not included and is sold separately.

Very nice interior wood handle. Great quality.. Biserka. Burtonsville, MD. Sat May 25 2024

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

Just what we needed for my son’s windows!. Samantha. Erlanger, KY. Thu Aug 18 2022

This is a right-handed Dyad casement operator with a white finish. The actuating arm is jointed with a clip on the end that catches onto the stud bracket that fits onto the sash. Hardened steel arms, worm drive and gears are protected with a corrosive resistant finish. The mounting holes are a blind tap meaning that the screws thread through the window frame and into the back of the operator housing.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This casement operator cover is constructed from high impact plastic and it comes white in color. It fits Pella casement operators and similar styled casement windows. This is a right-hand operator replacement cover for Pella casement windows, as determined (handing) by facing the window from the inside; looking out. For left-hand operators of the same style, see Prime-Line part H 4095.