Vestil Pvc48gy

15" H x 44" W x 84.88" D

Unique performance, convenience, and safety features are built into every lift master boom. Fabricated from structural steel with welding to meet AWS creates a rugged and durable boom that will provide long term service. This unit comes with an infinitely adjustable locking screw. A safety restraint secures the boom to the fork truck for safe operation.

The Edge-O-Dock leveler permanently attaches to face of dock. It is recommended for docks to be at least 48 inches high. When the trailer departs, the lip drops automatically behind the face of the bumpers. Concrete recess is not required. It comes complete with bumpers and installation instructions. Standard Ramping is 29 inches; models FM/PP/PE 3066 and 3072 are 29-13/16 inches, with a 36-5/8 inches long ramping length available. A steel dock edge, or approach ramp is required for proper installation. The Hydraulic Hand Pump system is used to lift the leveler and extend the lip. The operator rotates the relief valve allowing the deck to descend down and rest upon the trailer. Unit comes complete with hand pump, wall mount brackets, cylinder, One-hundred Eighty (180) inch hydraulic line and oil. Truck must pull out for leveler to return to stored position.

The Pneumatic Tire Hydraulic Elevating Carts are designed to be ergonomically friendly for use in landscaping and construction sites. The unit is constructed of powder coated welded steel for long lasting durability, while moving smoothly on pneumatic tires over the roughest of conditions. The cart can be elevated or lowered with the foot actuated pump and can be held in place while in use with the additional safety stops.

An eight-wheel dolly can be a major benefit in many conditions. The large oversized wheels give the unit and any material on board, a smooth vessel to move goods in-between areas. Yellow adjustable plate fitted to the rear of the unit. The plate acts as a barrier for items that fit snuggly on the dolly. When the plate is down, it makes room for any oversized products that are too long to fit perfectly square onto the platforms of the dolly. The front of the dolly is an open design that makes it easy to secure any sort of pulling device that may be used. Also included is a strap that can be used to pull the unit, by mechanical or manual means. The eight-wheel unit provides added capacity to the unit by including two extra wheels to the center of the dolly for a more solid foundation.

The Fixed Height Aluminum Gantry Cranes are ideal for the manufacturing and maintenance facilities. The aluminum construction is easily manageable and can be simply assembled for immediate use. The unit has a fixed height for working in a permanent or semi-permanent environment. The phenolic casters allow the user to move the crane from workstation to workstation and smoothly roll over rough surfaces, while not marring. Do not move units while loaded.

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

DC powered portable hydraulic lifts are user friendly providing reliable, powerful lifting when moving and positioning loads. Units roll easily on two rigid and two swivel poly-on-steel casters and include a foot operated brake. Not for use with pallets. All welded steel construction with chrome uprights. Variety of attachments available.

This Portable Drum Lifter/Rotator/Transporter is air powered. For use with steel and fiber drums.

Store steel drums in the vertical position with this non-flammable heavy-duty, one-hundred (100) percent Recycled, Vertical Steel Retention Basin. The basin is constructed of steel to resist extreme heat environments. The rugged steel construction provides durability and repairability. Four way fork entry. Basins are stackable when empty to provide more space in a warehouse or storage area.

This portable drum lifter/rotator/transporter features a rotation mechanism that provides rotation of the drum. The mechanism raises and lowers the drum. For use with steel and fiber drums.

Lift items from ground to van floor height then rotate cargo into the area. Unit is designed for vertical lifting only. Do not use the unit for lifting personnel or overhead lifting.

The Portable Worksite Lift is ideal for positioning loads where they are needed. It includes a lifting platform and an overhead lifting boom for unique applications. It features a manual hand crank cable winch with hook. Portability is easy with the phenolic swivel casters and a push handle. The unit knocks down in three pieces- base, platform and upright. It's ideal for storage in tight places and for transportation in the back of a vehicle.

The Tilt Master Straddle lifts and positions filled tote boxes or baskets without the need of a fork truck or lift table using the newly designed heavy-duty tilt master. The tilter will function as transporters by moving completed products from work station to work station without waiting for a fork truck. It features a folding ergonomic handle for quick and easy maneuverability. This Lift has a thin profile to allow the user to get as close to the load as possible. The unit has a standard floor lock and rolls easily on the phenolic steering wheels. Lift is designed to be used with virtually any kind of container or pallet and is powered by an AC electric motor that. The unit comes standard with a push-button hand control on a coil cord.

The Manual Operation, Portable Drum Lifter/Rotator/Transporter features pivoting straddle legs for access to drums on pallets. Legs will manually pivot and lock into place with locking pin. The unit is good to use with steel and fiber drums.

205" H x 88" W x 240" D

The adjustable height steel gantry crane is designed for transporting and positioning materials along the length of the beam. The crane's beam height can be adjusted to better conform to the working conditions making it both ergonomically friendly and cost-effective. Unit comes with standard four-position locking swivel casters with roller bearings. Locks the rigging in 1 of 4 positions; you can set the wheels and push the gantry crane forward, back, left or right. Do not move units while loaded. The hoist and trolley can be ordered separately. A painted blue finish protects the unit. Designed for semi-permanent or permanent applications.

Transport plants, flowers, trees, shrubs, rocks, and similar materials or parts with this landscape, nursery & agriculture cart. The cart is rugged and easy to maneuver with their large pneumatic tires. This platform cart has mesh sides and bottoms to allow dirt, small rocks, and water to drain through.

love it! Ive carried bags of mulch and potting mix as well as large, heavy pots around the yard! What a back saver!!!. Caroline. TX. Thu Jul 28 2022

6.125" H x 14" W x 18" D

72.25" H x 68.88" W x 50" D

Unique portable Economical Drum Transporter is designed to lift and transport drums with a top lip. Steel jaw securely grips the top lip of the drum. DC Powered lift mechanism. Straddle legs rotate for access to drums on pallets. All welded steel construction Powder coated with a safety yellow finish.

This traction-drive cart features built-in traction-drive system for easy transportability. Ideal for applications including mail rooms, hospitals, supermarkets, hotels and warehouses. Features electric drive motor with batteries for power. Internal battery charger is included. Variable throttle speed control for precise maneuvering and positioning is located in the handle. Cart rolls smoothly on non-marking solid foam filled wheels. Speed control is conveniently located in handle. Handle pivots back towards operator and includes horn, automatic brake and emergency stop. Each shelf includes a non-slip tread plate surface. Includes on-board charger and battery level indicator.

3600 lbs Wireless Electric Trailer Dolly:Built for heavy-duty towing, this electric dolly offers stability and security with an anti-tip design and deep-tread tires for smooth performance on hard surfaces. Adjustable height and hitch ball for versatile compatibility. Precision control and intelligent protection for ease of use.

Great. Anonymous. Fri Apr 17 2026

62.5" H x 25.5" W x 46.4375" D

This solid steel Pallet Lifter contains tapered forks to allow easy access under pallets. Main support contains handles to allow personnel to position the unit. Large square head serves as a counterweight to keep the unit level without a load.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

Fully Electric Pallet Jack: Up to 4400 lbs Load Capacity: Our electric pallet jack supports up to 4400 lbs with a high-strength steel frame and 2.1-inch thick forks. It easily handles 6° inclines, with a compact 52.76-inch turning radius. A full charge takes 4-5 hours, providing 6 hours of continuous use. Includes security features for efficient, secure handling. Ideal for warehouses and loading platforms!

Constructed of reinforced rubber to provide a sure grip on virtually any surface. Curved surface contours to fit tires. Rubber resists tearing, abrasion, ozone weathering, etc. The functional design is durable in all weather conditions.

The hefty lift is a user-friendly, portable hydraulic lift. The lift provides reliable, powerlifting when moving and positioning loads. It includes a removable platform for operation requiring forks. The non-slip chain is used for accurate positioning while the Lift rolls easily on two rigid and two swivel poly-on-steel casters that include a foot-operated brake. The unit has an all-welded construction with a chrome platform and uprights. Not for use with pallets.

The Economy Portable Drum Lifter/Rotator/Transporter make it easy to lift, transport and tilt drums. Ideal for use in warehouse environments when moving drums to and from racks. Drums can be locked in a vertical position to avoid spills or a horizontal position for draining through a faucet. A manual hand crank allows the drum to tilt. Raise the drums with a manual hand or foot pump operation. This model has a clamp style cradle which securely grips around the drum. For use with steel drums only.

The unique portable Roll Dolly is designed for moving, holding, and dispensing rolls of material right where they are needed. Integral turntable easily rotates on ball bearings to allow for dispensing. Upright post detaches to allow for easy loading of larger rolls. Portable on lockable swivel casters steel construction and powder coat finish.

Pallet rack lifting dollies are designed for moving empty fully-assembled pallet racking. These dollies are used with the pallet lifting dolly jack to hold racking frame feet.

Constructed of reinforced rubber to provide a sure grip on virtually any surface. Curved surface contours to fit tires. Rubber resists tearing, abrasion, ozone weathering, etc. The functional design is durable in all weather conditions.

The die table is designed to reduce back injuries and cumulative trauma disorders. It lifts heavy equipment to ergonomic working heights. The unit has a manually operated hydraulic foot pump and lift cylinder. The all welded steel construction will provide years of service and hard work. The small frame size allows unit to access hard to reach locations. Unit rolls smoothly on two rigid and two swivel with side brakes casters standard.

A cylinder truck transports cylinders safely. This unit comes complete with safety chains to secure the cylinders in place. Made of all-steel construction. The casters allow for portability without the need of a fork truck or pallet truck.

The heavy-duty plastic platform truck will not rust, discolor, or warp. Maintenance free and easy to clean. Honeycomb construction is reinforced for longer life. Extra square steel tube underneath platform to reinforce deck strength. This 4 wheel unit rolls smoothly on polyurethane casters.

67" H x 43.75" W x 79.13" D

The fully powered electric floor crane has an easy and quick operation. The unit raises and lowers loads with a push of a button. It can maneuver loads in warehouses and trailers. The heavy-duty rigid hook with a safety latch provides long service. The high-torque DC drive and lift motors handle heavy-duty jobs. The floor crane includes the integral battery charger, battery level gauge, and emergency battery disconnect. The truck rolls smoothly on poly-on-steel, steer, and load wheels. Ergonomic handle features easy to operate throttle with infinite adjustment of forward and reverse speeds, controlled lift/lower controls, adjustable length legs, proprietary safety-enhancing emergency reverse function, and horn. When the proprietary safety-enhancing emergency reverse function is actuated, the emergency reverse belly switch instantly reverses direction and moves the unit forward (away from the operator) until the switch is released or after 1.5 seconds have elapsed. The built-in safety circuit will automatically disable the entire unit if the emergency reverse belly switch is activated for more than 1.5 seconds after which the unit must be re-set to return to normal operating conditions. This state-of-the-art safety device provides a level of operator protection that is unmatched by any unit on the market today. Also includes an electromagnetic disc brake with an automatic dead-man feature that activates when the user releases the handle. Not recommended for use on incline surface and no greater than 4 degrees on a declined surface.

23.93" H x 24" W x 37.875" D

The Mechanical Post Table is an adjustable portable table that is well suited for a wide variety of material handling applications. It moves smoothly on two rigid and two swivel poly-on-steel casters. Provides positive height adjustment without a downward shift. It features a two-speed manual gear mechanism to move heavy loads.

97.87" H x 51" W x 72.5" D

The Portable Lift-and-Dump Hydraulic Drum Dumper is what you need to dump drums at variable heights. The HLD works similarly to the HDD but includes a lift cylinder that allows you to dump at various heights. Feature a four (4) push button pendant which allows the operator full independent control of both lift height and the dump angle.

Experience unmatched comfort and support with this electric wheelchair featuring 8-10 inch run-flat tires for safe travel on any surface. Its ergonomic seat and breathable cushion ensure all-day comfort. Easy to use with a 360-degree control lever and five-speed settings, it meets various mobility needs. With a lightweight, foldable design and a powerful 500W motor, this wheelchair offers a range of up to 15 miles, combining reliability with convenience for active lifestyles. Enhanced safety features like an electronic braking system and anti-tilt wheels provide peace of mind on every journey.

Claude. Quebec, QC. Mon May 04 2026

The Lite Load Lift is ideal for lifting and transporting loads from delivery trucks to docks, or use to inventory storage systems. This Lift is easy to operate with a hand winch operation and a steel construction. The unit rolls smoothly on poly-on-poly rear wheels, four swivel front casters and a hand operated floor lock. Located on the handle are two (2) rollers to ease loading into delivery trucks. 400 lb. capacity.

Use this aluminum folding handle platform truck with non-marking casters for safe transportation of stacks of paper, small parts and other lightweight equipment. Ideal for maintenance rooms, offices, schools, hospitals, etc. Plastic corner protectors enhance durability and protect surroundings. The unit has a rugged aluminum construction with single handle design.

Love it, haven’t use it though. Marcelino. Phoenix, AZ. Wed Dec 02 2020

Empower caregivers to safely assist limited-mobility individuals with this electric stair climbing chair. Designed for straight stairs under 50 degrees, it offers reliable, efficient transport in homes and multi-story buildings without elevators. Crafted from durable aluminum alloy, it combines strength with a quick-fold design for easy storage and transport. The 81cm extended track ensures smooth, bump-free navigation over up to 3 steps, prioritizing stability and ease of use for both caregivers and users.

I can't climb the steps right now and this is the best thing that ever happened fir me. I can go out side without using a wheelchair which was a two person job. However, this works for me.. Deb. Philadelphia, PA. Wed May 20 2026

Transport plants, flowers, trees, shrubs, rocks, and similar materials or parts with this landscape, nursery & Agriculture cart. The cart is rugged and easy to maneuver with their large pneumatic tires. This cart has mesh sides and bottoms to allow dirt, small rocks, and water to drain through. Tow coupler is standard.

Use this all the time to move stuff around the yard. Jeffrey. San Bruno, CA. Mon Jan 25 2021

The JIFRAM EXTRUSIONS 48-in x 18-in raised plastic storage pallet 2-pack provides flexible elevated storage for garages, basements, attics, laundry rooms, warehouses, and other utility spaces. Each 4-in H low-profile storage pad is made from durable recycled plastic and supports up to 1000 lbs., helping keep boxes, tools, equipment, seasonal items, and supplies off damp or dirty floors. The ventilated surface promotes airflow and helps reduce direct contact with standing water, dirt, salt, and other floor debris. Use the pallets together for expanded raised floor storage or separately in different areas; no assembly or tools are required.

This was perfect for my garage. Keep stuff up off of floor. Very well made. Kym. US. Fri Mar 13 2026

The Lift & Tilt Scissor Lift performs both lifting and tilting operations. There is a restraining chain and lip to keep the load in place during tilting. Safety features include: electric toe guard to protect worker from pinch points during lowering of table, velocity fuses to hold platform position in an event of a hose or fitting failure, four (4) push-button hand pendant control, upper limit switch to stop travel at maximum height reducing motor wear, and maintenance prop. The end tilt is standard with a side tilt available. There is optional accordion skirting available for both the lifting and tilting portions of the table.

The steel fork lifter is designed to quickly and easily attach or remove forged steel forks from a carriage. The lifter features different hook points to balance a variety of fork lengths. Two tightening knobs are included to secure the fork to the lifter when being moved.

Finally an easy answer to lifting, storing, and transporting problems associated with LP tanks. This all-in-one LP Tank Truck allows users to transport LP tanks where needed. The built-in crane can be used to safely load full tanks into fork trucks. The crane pivots for maximum versatility. The crane boom is raised and lowered with a manual hand pump hydraulic lift. The tank attachment at the end of the boom automatically clamps to each end of the cylinder. The built-in racks are ideal for LP tank storage-racks. Store two (2) tanks in the vertical position and four (4) tanks in the horizontal position. Truck includes a push handle with casters for portability.

Use this aluminum folding handle platform truck with non-marking casters for safe transportation of stacks of paper, small parts, and other lightweight equipment. Ideal for maintenance rooms, offices, schools, hospitals, etc. Plastic corner protectors enhance durability and protect surroundings. The unit has a rugged aluminum construction with single handle design.

Philomena Ayres. Westlake Village, CA. Fri Jul 02 2021

3.5" H x 48" W x 48" D

A scale ramp is an ideal option for the electric digital floor scale. The unit features steel construction with a tread plate that provides a strong foundation for consistent use. This unit is portable and can be moved from workstation to workstation.

The Hitch mounted Jib Crane is ideal for on location operations, as well as, common secure transference of goods. The unit features a manual hand brake winch with cable and lifting hook for safe transporting. The welded steel construction with a powder coat black finish is durable and strong in the harshest of conditions. The offset design allows for full use of tailgate while winch is in operation. Unit is designed for vertical lifting only.

The hydraulic elevating cart minimizes worker bending and lifting through its ergonomic design and portability. The material can be easily loaded onto a cart from a table, lowered to a safe transporting height, and raised to unload at destination. The foot pump includes a soft-lowering down valve. The unit moves easily on four polyurethane casters, two swivels with brakes and two rigid. Features a single-speed foot pump and aluminum construction. Features an internal safety velocity fuse in each cylinder.