Strike 10 Amd B

Polished Brass

Our security strike plates and latch guards are your first line of defense against forced entry. For use on both wood and metal door jambs, our products work with most grade 1, 2, and 3 locksets. Whether you have single or double locks, you can count on First Watch Security to be part of your home security.

Oil Rubbed Bronze, 2.5" H x 2.25" W x 0.05" D

These standard latch strikes are constructed of steel and come in a satin nickel or oil-rubbed bronze finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with each package. These latch strikes are used by many to replace most residential interior and exterior door strikes. * Adjustment tip: To eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.

Needed this strike for an extra deep door jamb, it worked perfectly. Rob. Whitby, ON. Sat Apr 11 2026

This maximum security combination strike is constructed of stamped steel and it comes plated in a classic bronze finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3-inch. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush installation.

fits standard 1 3/4 deep door. Daniel. Thu Sep 11 2025

Our plates and latch guards are your first line of defense against forced entry. For use on both wood and metal door jambs, our products work with most Grade 1, 2, and 3 locksets.

These door latch strike plates are constructed of stamped steel and come in a stainless steel finish. They feature an adjustable tab to allow for best engagement of the door latch, and they are used to replace most interior and exterior residential latch strikes. This item includes fasteners and 2 strike plates per package. These plates measure 1-7/16 inch wide x 2-1/4 inch tall and have mounting holes 1-5/8 inch on center.

Polished Brass

Our plates and latch guards are your first line of defense against forced entry. For use on both wood and metal door jambs, our products work with most Grade 1, 2, and 3 locksets.

Finally a lip strike long enough!! As you can see, the current lip strike has been drilled many times, so there is no more wood to secure the top part. This extra long strike will absolutely make a difference as I can drill into a different part of the frame. I love that it came with different lengths of screw. It will be a breeze to install.. Megan. Smyrna, GA. Thu Aug 28 2025

5.4" H x 3.75" W x 0.65" D, Satin Nickel

These door latch strike plates are constructed of stamped steel and come in a beautiful finish. They feature an adjustable tab to allow for best engagement of the door latch, and they are used to replace most interior and exterior residential latch strikes. This item includes fasteners and 2 strike plates per package. These plates measure 1-7/16 inch wide x 2-1/4 inch tall and have mounting holes 1-5/8 inch on center.

This slide latch and strike combo kit is constructed of stamped stainless steel with black rubber bumpers, and it comes in a satin finish. One-way installation fasteners are included with this latch.

Matte Black

Quickly and easily replace your existing extended lip strike plate with one from Stone Harbor Hardware that features beautiful, non-flaking finishes to match any decor. This hardware measures 2-1/4 inches tall, 4-1/2 inches wide, and 1/16 inches thick. The screw holes on the strike measure 1-5/8 inches from center-to-center. The size of our extended lip strikes are listed by the distance from the center of the screw holes to the edge of the lip. The overall width of these strikes is always larger than the listed strike width within the product name. For example, this strike plate features a listed width of 4 inches but has an overall width of 4-1/2 inches. All of the necessary mounting hardware is included for a hassle-free installation. Stone Harbor Hardware products are manufactured with durable materials to create a long-lasting and high-quality product that matches other Stone Harbor Hardware items of the same finish. Check out the rest of Stone Harbor Hardware’s items to explore more hardware solutions for your home.

Really nice but came with a scratch. Sabrina. Etobicoke, ON. Mon Nov 17 2025

Our plates and latch guards are your first line of defense against forced entry. For use on both wood and metal door jambs, our products work with most Grade 1, 2, and 3 locksets.

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

Polished Brass

works great in rooms that you dont want to hear a door engage. We used in the meditation room. Catherine. Southampton, NY. Sun Aug 16 2020

This standard T-strike is constructed of solid brass and comes in a classic bronze finish. It can be used on both wood and metal jambs, and it is compatible with most Grade 2 locksets. This security strike meets ANSI A156.2. It features an easy to install design with 2-1/8 in. hole centers. For best results, follow the installation instructions included with each package. These strikes are easy to install using only a few simple tools. For further dimensional information, please see the line drawing.

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

Polished Brass

Our security strike plates and latch guards are your first line of defense against forced entry. For use on both wood and metal door jambs, our products work with most grade 1, 2, and 3 locksets. Whether you have single or double locks, you can count on First Watch Security to be part of your home security.

I ordered this for an old door I have. My house was built in 1929 so some of the things in it are hard to find. I could not fit it where I needed at my house but it isnt the parts fault I ended up giving it to a friend at a habitat house and it works great. Deborah. Keene, NY. Thu May 07 2026

Our security strike plates and latch guards are your first line of defense against forced entry. For use on both wood and metal door jambs, our products work with most grade 1, 2, and 3 locksets. Whether you have single or double locks, you can count on First Watch Security to be part of your home security.

Oops picked the wrong color! Exchanged and all is well.. Anonymous. Sat Mar 07 2026

Matte Black

Quickly and easily replace your existing extended lip strike plate with one from Stone Harbor Hardware that features beautiful, non-flaking finishes to match any decor. This hardware measures 2-1/4 inches tall, 3-1/2 inches wide, and 1/16 inches thick. The screw holes on the strike measure 1-5/8 inches from center-to-center. The size of our extended lip strikes are listed by the distance from the center of the screw holes to the edge of the lip. The overall width of these strikes is always larger than the listed strike width within the product name. For example, this strike plate features a listed width of 3 inches but has an overall width of 3-1/2 inches. All of the necessary mounting hardware is included for a hassle-free installation. Stone Harbor Hardware products are manufactured with durable materials to create a long-lasting and high-quality product that matches other Stone Harbor Hardware items of the same finish. Check out the rest of Stone Harbor Hardware’s items to explore more hardware solutions for your home.

0.5" H x 4" W x 5.5" D, Brass

This security deadbolt strike is constructed of stamped stainless steel and it comes in a satin finish. It features a 3/4 in. x 1-1/16 in. bolt opening to accommodate large bolt dimensions. This security strike is designed to replace the smaller deadbolt strike plates with a thicker 1/16 in. plate and two additional fasteners for maximum security. Installation of this strike will strengthen a locked door with the inclusion of two, 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot-hole drilling may be required for a flush install.

These door latch strike plates are constructed of stamped steel and come in a chrome finish. They feature an adjustable tab to allow for best engagement of the door latch, and they are used to replace most interior and exterior residential latch strikes. This item includes fasteners and 2 strike plates per package. These plates measure 1-7/16 inch wide x 2-1/4 inch tall and have mounting holes 1-5/8 inch on center.

This deluxe, non-handed sliding screen door latch and pull is constructed of diecast metal and it comes in a chrome plated finish. It is a surface mounted latch and keeper, designed for interior installations. Can be used on both single and double sliding doors alike, it is extremely versatile and easy to install. All the necessary mounting hardware is included for a quick and easy installation. Other colors are available for purchase.

Matte Black

Quickly and easily replace your existing extended lip strike plate with one from Stone Harbor Hardware that features beautiful, non-flaking finishes to match any decor. This hardware measures 2-1/4 inches tall, 2-1/2 inches wide, and 1/16 inches thick. The screw holes on the strike measure 1-5/8 inches from center-to-center. The size of our extended lip strikes are listed by the distance from the center of the screw holes to the edge of the lip. The overall width of these strikes is always larger than the listed strike width within the product name. For example, this strike plate features a listed width of 2 inches but has an overall width of 2-1/2 inches. All of the necessary mounting hardware is included for a hassle-free installation. Stone Harbor Hardware products are manufactured with durable materials to create a long-lasting and high-quality product that matches other Stone Harbor Hardware items of the same finish. Check out the rest of Stone Harbor Hardware’s items to explore more hardware solutions for your home.

good quality, color as expected. Rebecca. Warwick, RI. Mon Mar 09 2026

V1356 Rigid Strike Replacement Set - Aluminum

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

Matte Black

Polished Brass

1.88" H x 4" W x 6" D

These throw latch keepers are constructed of cast stainless steel and they come in a satin finish. They are ADA compliant, providing easy access when emergency entry is required. The keepers feature a slotted top & bottom opening for use with in-swinging left and right handed restroom stall doors. Keepers like these are manufactured in various dimensions for use with different latches, as well as in alternate finishes. These throw latch keepers are used by many, and they are simple to install. This item includes T-27 Torx security fasteners for installation of keeper. These fasteners feature tamper-resistant 6-lobe security drives with center pins.

This deadbolt strike plate is constructed of stamped stainless steel and comes in a satin finish. It features an 1/8 in. thick, heavy gauge stainless steel base which allows for 3 in. screws to be anchored into the wall stud. This two-piece high security deadbolt strike replaces standard exterior residential deadbolt strikes adding increased security to entry doors. This item includes one two-piece strike plate per package with fasteners. Pilot holes for 3 in. screw installation, and additional, deeper chiseling may be required flush install.

Polished Brass

Oil Rubbed Bronze, 0.1" H x 2" W x 4.5" D

Dexter commercial hardware, provides the locksmith customer with a competitive option for locks, exits, and closers. With over 200 SKUs of grade 1, grade 2, and residential grade products, dexter commercial hardware is your solution for basic, cost-constrained jobs.

Lifetime Brass, 2" H x 1.75" W x 0.2" D

Polished Brass/Tan

I like this style of catch better than the kind that interlock. Releases easily from magnet w a gentle tug.. Rita. Tue May 12 2026

These door latch strike plates are constructed of stamped steel and come in an antique brass finish. They feature an adjustable tab to allow for best engagement of the door latch, and they are used to replace most interior and exterior residential latch strikes. This item includes fasteners and 2 strike plates per package. These plates measure 1-7/16 inch wide x 2-1/4 inch tall and have mounting holes 1-5/8 inch on center.

Great!. Natali. Tue Jun 02 2026

This door strike reinforcing kit by prime-line products is constructed of solid brass and comes in a beautiful, corrosion-resistant, classic bronze finish. This two-piece security strike kit allows for hole center flexibility in securing combination deadbolt and entry lock installation, as the two can be separate from one another as determined by existing door locking hardware. The deadbolt and entry lock strikes included in this kit replace most strikes and improves security with 3 in. Long screws are attached to the wall stud.

This strike and keeper is constructed from zinc alloy with a chrome plated finish. Often found on restroom partition walls that are 1-1/4 inch thick. They are easy to install.

Matte Black

Quickly and easily replace your existing full lip round corner blank strike plate with one from Stone Harbor Hardware that features beautiful, non-flaking finishes to match any decor. This hardware measures 2-1/4 inches tall, 1-3/4 inches wide, and 1/16 inches thick. The screw holes on the strike measure 1-5/8 inches from center-to-center. All of the necessary mounting hardware is included for a hassle-free installation. Stone Harbor Hardware products are manufactured with durable materials to create a long-lasting and high-quality product that matches other Stone Harbor Hardware items of the same finish. Check out the rest of Stone Harbor Hardware’s items to explore more hardware solutions for your home.

This door strike is constructed of extruded aluminum and it comes in a clear anodized finish. It can be used with 1-inch thick restroom partition doors that swing-out. This flat strike features a tall black rubber bumper that measure 1/2 inch wide x 6-inch in height. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

This outswing keeper is used with slide latch, fits on a square edge 3/4 inch post, it is constructed of satin cast stainless steel, the strike keeper measures 2-1/2 inch x 1-7/16 inch x 1-7/8 inch. The mounting holes are at 1-1/2 inch.

Satin Nickel, 11" H x 4" W x 1.25" D

This is a maximum security combo strike that fits 5-1/2 in. and 6 in. hole spacing's on center dead latch and deadbolt. Uses six 3 in. screws that install on the vertical side of the strike closest to the stop molding. These 3 in. screws allow for a strong hold as they drive into the jack stud to help prevent kick-ins. Three #8 x 3/4 in. screws install on the side of the strike closest to the door.

Steel

A strike plate made from solid with a finish and countersunk screw holes. Designed to complement Buster + Punch door hardware and latch accessories. Fits standard doors.

Antique Brass

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

2.75" H x 1.98" W x 0.44" D, Steel

A strike plate made from solid metal with a finish and countersunk screw holes. Designed to complement Buster + Punch door hardware and latch accessories. Fits 54mm doors.

Satin Chrome