Primeline S 4066

Chrome

Elevate Collection is a perfect combination of sleek line styling with a chic contemporary look. This collection will appeal to those who seek a clean design, as well as for those who appreciate a minimalist space.

Looks very pretty in the powder room. The glass is thick, not skimpy.. Randy. Playa Del Rey, CA. Wed May 27 2026

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Mon Jun 23 2025

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

These T-27 Torx screws are used together with T-27 barrel nuts where tamper-proof installation hardware is preferred. The heads require a specific screwhead to install or remove the typical Torx head cannot be used.

Satin Nickel

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Mon Jul 08 2024

White

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

This is a foam screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.145 inch in diameter. It is a top quality, round, smooth polyethylene with a flexible foam core. This is also an excellent substitute for metal spline. Color is black. 500 ft. per roll.

Zinc Plated, 3.6" H x 3.8" W x 0.85" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole. These stainless steel screws are rust and corrosion resistant.

Prime-Line MP1583 Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 72 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Anonymous. Sun Nov 02 2025

These Prime-Line U 10169 Steel Shelf Support Pegs make sure your shelves stay in place, with a 20 pound maximum safe load per peg. Constructed of steel, the shelving pegs come with a nickel plated finish and are strong and durable. These shelving support pegs are easy to install and used in many shelf support applications. Each shelving peg has a 1/4 inch diameter with 5/32 inch screw mounting hole. For further dimensional information, please see the line drawing.

Nice to have extras in case the others fall out and get lost. Toni. Oldsmar, FL. Tue May 05 2026

This casement window cam handle is constructed from heavy bronze casting. It features a 9/16 in. hook projection and 1-3/8 in. mounting hole centers. This type of cam handle is typically used on steel windows and it is easy to install.

8.4" H x 3.75" W x 0.95" D, White

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

9-1/2 Inch

This Prime-Line H 3571 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

EXACTLY what I needed and works like new.. Anonymous. Wed Oct 02 2024

Chrome

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted latch and it features a side- or face-mountable keeper with installation fasteners for both. This patio sliding screen door latch can be used on both single-active panel and dual-active panel sliding screen doors. These sliding screen door latches are extremely versatile. Sliding screen door locks like these provide secure latching capabilities as a primary or secondary latch. Secures sliding screen door from accidentally opening by pets or other animals. Order yours today and make your sliding screen door secure again.

This was a good alternative to the latch I wanted that you had but was out of stock.. Kevin. Minneapolis, MN. Mon Feb 06 2023

Gray, 30.13" H x 3.75" W x 1" D

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Fri Feb 20 2026

Aluminum

This is a left-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has an attractive finish with mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

Designed for use with a concealed latching mechanism, it assembles easily with a push nut fastener. This lever set has a 1-5/8 in. outside diameter, and it features an overall reach of 2-13/16 inches with a flat, slotted emergency-access knob on the exterior. Lever sets like these are used to replace broken and missing lever and knob sets of concealed latches. This Lever set is used by Sanymetal for use with steel doors, and it is easy to install. Note: Assembly will be permanent upon the first unification of both parts. Attempting to separate the inside and outside knobs once joined may damage the internal push nut component.

Aluminum

This Prime-Line H 3959 is a universal folding crank handle that fits most casement operator crank spindles. It is diecast construction with a aluminum finish. The universal spline system fits most casement operators. It is easy to install. The folding design is often used to replace the normal crank handle to avoiding interference with window blinds.

These one-way screws and barrel nuts are constructed of steel and come in a chrome-plated finish. They feature one-way, tamper-proof drive heads that prevent them from being loosened and removed once installed. The security drive heads of these fasteners allow for easy installation with a flat screwdriver, but require the use of a one-way screw remover tool. See item number 650-7901 for screw sizes 6-8, model number 650-7902 for sizes 8-10, and model number 650-7903 for sizes 12-14, or model number 650-7904, which includes one of each one-way screw remover hand tools.

These Truth Hardware Sash Locks by Prime-Line Products are constructed of high pressure, corrosive resistant, diecast zinc and they come in a bronze baked-enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The mounting holes are spaced apart evenly, and they feature backset holes. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. These locks are easy to install and used by many.

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Fri Feb 13 2026

This strike and keeper is constructed from Chrome Plated Zamak. Keeper is 1-1/4 inches X 2-3/8 inch X 2-9/16. Fits on 1-1/4 inch round edge posts and is used on inswing applications for Throw Latch (Emergency Entrance) and is ADA Compliant.

These anchor clips are constructed of cast stainless steel and they come in a satin finish. Together they feature a 1/4 in. offset and two (2) pre-punched installation mounting holes. This item includes one pair of clips; an inside and outside leaf, and they are used for fastening partition panels to restroom partition pilasters. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

These one-way barrel nuts are constructed of steel and come in a chrome plated finish. They feature a tamper-proof head which prevents them from being loosened or removed once installed. These fasteners are manufactured with #10-24 thread and have a reach of 5/8 in., with a 1/4 in. shaft outside diameter, and a 7/16 in. head diameter. One-way barrel fasteners like these are commonly used with one-way shoulder screws in commercial restroom applications. Installation of these types of security fasteners requires only the use of a (flat head) slotted screwdriver, while the removal of these fasteners requires a one-way screw remover tool.

White

Try this new and improved design that is easy to operate and add an extra layer of security to your home with this Prime-Line Door Reinforcement Lock with integral pull. Designed to withstand 800 pounds of force that provides an unparalleled level of protection! This reinforcement lock has a spring-loaded design, solid brass construction and a white finish with an additional integral finger pull for easy operation. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and the door reinforcement lock comes with 3-inch hardened screws. Extra home security and peace of mind are well within reach and doesn’t have to come with the high price tag of an alarm system!

This reinforcement lock is very good quality. It was very easy to install, although I measured wrong the first time and had to move it. So, be careful and make sure you can close the door once it’s fully installed. It seems to be strong enough to withstand an intruder.. Melanie. US. Mon Mar 10 2025

The slide latch features an "occupied" or in-use exterior indicator that changes from green to red when the latch is engaged, and it displays the green color, or unoccupied state, announcing its availability for use when the door is unlocked. Toilet partition knob sets and latches like these are used to replace broken and missing knob sets of concealed latches used in thick steel door panel systems, which are designed to provide privacy in restroom partition stalls. This latch is a 3-component piece lockset that features a simple snap-together assembly, without the need for any additional fasteners. This slide latch knob set is used by Metpar and many other restroom partition manufacturers, and it is easy to install.

This OUTSWING door latch set is constructed of zinc alloy (cast zamak) and comes in a chrome plated finish. These are the components included with this kit: One #650-2770 hook, one #650-6638 door stop, one #650-7265 top pivot hinge, #650-7262 bottom pivot hinge with 5/8 inch pintle, one #650-6530 strike & keeper, one ADA #650-9093 lever set, one #650-7205 candle cam and one #650-7663 pivot hinge pin, one (pair) of #650-2701 back-2-back door pulls with T-27 Torx security fasteners for installation of all components. These fasteners feature tamper-resistant 6-lobe security drives with center pins.

Surface-mounted hinge set, RH-in/LH-out, with fasteners, stamped stainless steel. Use with accurate, all American, amp, American sanitary, fiat, flush metal, global, general, met par, mills manufacturers.

This strike and keeper is constructed from Satin Stamped Stainless Steel. It features mounting holes 1-7/8 inch on center. Fits square edge posts Used on outswing applications for 3/4 inch doors.

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Lock cylinder fell out as soon as I tried to pull out the key. Also doesn't even work on my door lever handle.. Anonymous. Fri Feb 06 2026

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

This strike and keeper is constructed from zinc alloy with a chrome plated finish. Often found on restroom partition walls that are 1-1/4 inch thick. They are easy to install.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Viren. Tustin, CA. Sat May 11 2024

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed brass finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

This outswing keeper is used with slide latch, fits on a square edge 3/4 inch post, it is constructed of satin cast stainless steel, the strike keeper measures 2-1/2 inch x 1-7/16 inch x 1-7/8 inch. The mounting holes are at 1-1/2 inch.

This is a bronze finish left-handed, 9-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on a bronze finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90 degrees. The plastic roller on the end of the steel arm insure a smooth operation as it slides through the Prime-Line part TH 22397 track. When installing, the housing easily fastens down to the window sill.

This is a right-handed casement locking handle made of heavy cast white bronze with a polished finish. It has mounting holes 1-3/8 in. on the center. Used by a wide variety of commercial window manufacturers. For the left-handed version use Prime-Line part H 3602.

This Truth Hardware Maxim Locking Handle by Prime-Line Products is designed for use with Truth hardware only. It is constructed of diecast zinc and comes in a beautiful, corrosion-resistant, white-painted finish that will match other existing Truth hardware in the same white finish. The dimensions are 3/4 in. in width, has a 1-3/8 in. projection, and a 3-13-16 in. height. Features a multipoint lock for maximum security. Self-tapping Installation fasteners are included.

Christina. AB. Fri Sep 20 2024

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This maximum security combination strike is constructed of stamped steel and it comes plated in a satin nickel finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush install.

Matched perfectly with our new door entry combo. Secure for sure. What a difference.. Anonymous. Sat Mar 07 2026

These anchor clips are constructed of cast stainless steel and they come in a satin finish. Together they feature a 1/4 inch offset and 4 pre-punched installation mounting holes. This item includes one pair of clips; an inside and outside leaf, and they are used for fastening partition panels to restroom partition pilasters.

This Prime-Line M 6184 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy to install. The door sweep for the bottom of the door features a 3/32-inch round insert shape at its top. The 1-inch height and 37-inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare them with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.