Primeline Pl 15551

Classic Bronze

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Mon Jul 08 2024

Bronze

Add an extra layer of security to your home with this Defender Security Door Reinforcement Lock. Designed to withstand 800 lbs. of force, you can rest easy knowing your family is safe and protected! This reinforcement lock has a spring-loaded design, aluminum construction and a bronze anodized finish. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness, and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and this door reinforcement lock comes with 3 inch hardened screws. Extra home security and peace of mind are well within reach, and doesn’t have to come with the high price tag of an alarm system! Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner.

I'm happy I bought this. Additional security and stylish.. Veronica. Fort Worth, TX. Fri May 22 2026

3/8 in

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sat Feb 21 2026

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Debra. New Braunfels, TX. Thu Jun 04 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Wed May 28 2025

Black

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

These plastic turn buttons are used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw.

1.88" H x 6" W x 12" D, Stainless Steel

This combo lock and door reinforcer is constructed of stainless steel and fits 1-3/4 in. thick doors. Assists in preventing forced entry by reinforcing the weak spot of an entry door, and it can be used on both metal and wood doors. Accommodates key-in knob locksets on doors These door reinforcers are easy to install and they are used by many. All installation fasteners are included with this item. This guard features a 2-1/8in bore, 2-3/8in backset, 1-3/4in door thickness.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Satin Nickel

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

Antique Brass, 9.75" H x 5.2" W x 2.45" D

Upgrade your door security with this antique brass lock and door reinforcer, designed to help prevent forced entry by strengthening the vulnerable area around your lock. Perfect for repairing or reinforcing both metal and wood doors, this plate fits 1-3/4-inch thick doors with mortise or drive-in latches. Crafted from durable solid brass or stainless steel with an elegant antique brass finish, it features two 2-1/8-inch bores spaced 3-5/8 inches apart and offers backset options of 2-3/8 inches or 2-3/4 inches. The non-recessed plate comes pre-punched for easy installation, and all necessary mounting hardware is included. Please review the line art drawing for exact measurements before purchasing, as this item is not universal.

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Mon Jun 23 2025

Bronze

Whether you are trying to keep your toddler from opening the basement door, adding an attractive and functional enhancement to your closet doors or securing cabinets in your RV, the Prime-Line surface bolt is the versatile locking solution. Easy to install and constructed of durable solid brass, the 4 inch long surface bolt can be mounted horizontally or vertically and includes a surface mount keeper and a mortise-style keeper to accommodate a variety of applications. With a couple finishes, the surface bolt is not only effective, it’s attractive too. It’s a great alternative to traditional child (and pet) proofing products that can be hard to install and not complementary to your home décor. You can install the surface bolt out of the reach of curious little hands, so babies, toddlers and young kids cannot enter or exit into dangerous areas or go through cabinets and closets without supervision.

These extended lip latch strikes are constructed of solid brass and come in a polished brass finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with each package. These latch strikes are used by many on wide jambs with decorative molding. Adjustment tip: to eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.

I was glad to find this extra length strike plate at your site, because I couldn't find anything like it in hardware stores, was about to make one out of brass myself.. Anonymous. Thu Aug 17 2023

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Fri Feb 13 2026

This is a door lock reinforcer. Helps in preventing forced entry. Can be used on any wood or metal door that is 1-3/4 in. wide. The reinforcer is made of solid brass. Overall size is 3-7/8 in. wide and 9 in. tall, has a 2-1/8 in. borehole size and a 2-3/8 in. backset.

6.55" H x 3.7" W x 1.7" D, Satin Nickel

This Prime-Line Swing Bar Door Guard will increase peace of mind when answering the door by allowing the door to be cracked open slightly for viewing. When engaged, a ball on the keeper interlocks with the bar lock and prevents an intruder from pushing their way through. We have improved upon the standard door guard design and added an innovative backup thumb turn security lock that blocks the release tool from disengaging the door guard latch. In cases of emergency, hotel security or emergency crews can pop the thumb turn off of the unit by applying approximately 100 pounds of force to the door. (Note that 100 pounds of force is much greater than a simple kick in, so the emergency release feature does not compromise your security.) Additionally, after the thumb turn lock breaks away, the unit still operates as a traditional swing bar door lock and a specially designed Anti-Lockout emergency access tool is required to swing the door guard out of place. To help prevent forced entry into your home, it is always a good idea to engage the backup thumb turn lock whenever you are not actively using your door.

Just what I needed to update our locks!. Jp. VA. Sun May 10 2026

Restore security and maintain a clean, finished look on your doors with the Prime-Line U 10889 Door Knob Hole Cover Plate. Designed to cover unused knob or deadbolt openings, this durable plate helps prevent unwanted access while improving privacy. It’s an ideal solution for doors where hardware has been removed or relocated, helping eliminate exposed holes that can compromise safety or appearance. This versatile cover plate accommodates hole sizes ranging from 1/2 inch up to 2-1/8 inches in diameter, making it a practical option for a wide variety of door repair and upgrade projects. With a 2-5/8 inch outside diameter, it provides full coverage while maintaining a low-profile, professional look. It is designed to fit doors up to 1-3/4 inches thick, making it compatible with most standard residential doors. Constructed from heavy-duty steel, this hole cover offers reliable strength and long-lasting durability. The bronze finish adds a modern touch while resisting wear, blending seamlessly with existing door hardware. Whether you're updating entry doors, securing interior spaces, or improving property appearance, this plate delivers both function and style. Installation is quick and simple with just two fasteners, making it an easy DIY fix for homeowners and professionals alike. For best results, review the line drawing to confirm dimensions and compatibility before purchasing.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

These Keyed Locking Hasps by Prime-Line Products are constructed of steel and diecast components, and they come in a chrome-plated, corrosion-resistant finish. The locking twist-knob does not require the key to engage the lock. In order to open the hasp, the twist-knob must be unlocked with one of the two keys that are provided with the lock. Use these key-locking hasps to prevent small children from accessing dangerous chemicals, tools or machinery. This keyed locking hasp is keyed different and use an ILCO 1098M keyway. Keyed-alike hasps are available by special order only. Purchasing these keyed locking hasps in multiples will help simplify the task of unlocking when used on multiple doors, cabinets, etc.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Viren. Tustin, CA. Sat May 11 2024

White

Try this new and improved design that is easy to operate and add an extra layer of security to your home with this Prime-Line Door Reinforcement Lock with integral pull. Designed to withstand 800 pounds of force that provides an unparalleled level of protection! This reinforcement lock has a spring-loaded design, solid brass construction and a white finish with an additional integral finger pull for easy operation. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and the door reinforcement lock comes with 3-inch hardened screws. Extra home security and peace of mind are well within reach and doesn’t have to come with the high price tag of an alarm system!

This reinforcement lock is very good quality. It was very easy to install, although I measured wrong the first time and had to move it. So, be careful and make sure you can close the door once it’s fully installed. It seems to be strong enough to withstand an intruder.. Melanie. US. Mon Mar 10 2025

Copper, 6.55" H x 5.35" W x 2.45" D

This is a solid brass door reinforcer in a classic bronze finish. Helps prevent a forced entry. Typically used on wood or metal doors that are 1-3/8 in. thick with mortise or drive-in latches. Accommodates key-in knob locksets or deadbolts, or combination locksets. It features one 2-1/8 in. bore with a 2-3/8 in. backset.

This is a casement operator track that is riveted or screwed onto the bottom of a steel casement window. It fits the older style casement operators Prime–Line parts H 3500 through H 3523, and H 3581 through H 3588. The guide disc on the tip of the operator glides through the track to open or close the window.

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed chrome finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and a flat keeper used for outswinging doors, providing everything needed for a secure and reliable door locking solution.

Silver

This mortise latch unit features recessed grips on both sides so it can slide into your wall without obstruction. It has a center tab to easily retrieve your door from the wall. Comes complete in a nice satin.

Was what I needed. Right size. Great finish.. Anonymous. Yellville, AR. Thu May 25 2023

0.9" H x 1.5" W x 0.8" D

These ball bullet catch and strikes are constructed of solid brass and steel components. Each catch features fully adjustable barrels, and they install on the top edges of hinged-swinging doors, or on their vertical edges. These ball catches help keep doors closed without the need for standard turn knobs or levers, allowing doors to easily pull open and push closed. These ball catches are for use with hinged-swinging doors, commonly used on closet doors, pantry doors, kid's room, etc. They are easy to install and are used by many.

Good quality. They work nicely on the doors they were installed on.. Joseph. Washington, Dc. Mon Feb 23 2026

These escutcheon trim plates are constructed of stamped steel and come in a brass plated finish. These trim plates are designed for indoor use only and they are used with antique and vintage door hardware. Installation fasteners are provided with this set.

Bon produit mais cher. Maurice Des. Montréal, QC. Thu May 02 2024

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

This shower curtain hanger repair tab is constructed from clear plastic. It features an adhesive backing for quick installation. These tabs are used to repair tears in your plastic shower and liner curtains. Best results are achieved when repair tabs are applied on both sides of each tear.

The discs worked well to help prolong the life of my shower curtain.. Anonymous. Sun Jan 04 2026

Classic Bronze

This is a 3-1/2 inch diameter door cover plate. It will cover marred doors and allows conversion from 2-3/8 inch to 2-3/4 inch backset, or 2-3/4 inch to 2-3/8 inch. Designed for use to help the structural integrity of handles or locks on a door, or if damage has occurred on a door.

Just what I needed. Kim. Fort Wayne, IN. Sun Sep 28 2025

The Prime-Line K 5051 spring-loaded screen door catch is constructed from high-quality steel with a durable zinc-plated finish, ensuring long-lasting performance and secure closure. Featuring single roller arms, it keeps your screen door firmly shut, preventing unwanted openings caused by loose or worn latches and door closers. Designed for universal compatibility, this catch fits most hinged-swinging screen doors and accommodates various door and casing thicknesses for a versatile installation. Equipped with smooth, no-mar plastic rollers, it protects your door’s finish from scratches while delivering consistent latching and smooth operation. For precise fitting, please refer to the line art drawing to confirm dimensions before purchasing.

Stainless Steel, 6.1" H x 5.2" W x 2.4" D

Defender Security Lock and Door Reinforcer assists in preventing forced entry by reinforcing the weak spot of an entry door. It can be used to reinforce and repair both metal and wood doors. Made of solid brass construction, the lock reinforcer plate comes finished in stainless steel. All the necessary mounting hardware is included for a quick and easy installation. The lock reinforcement plate is pre-punched for mounting. The reinforcer is designed for 1-3/4 inch thick doors that have mortise or drive-in latches. It features one 2-1/8 inch bore with a 2-3/8 inch backset. The door reinforcer is recessed. Please refer to the line art drawing for dimensions and compare to your needs before purchasing (Not Universal).

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

These are bore reducer rings. Constructed of steel and comes brass-plated. They allow 1-1/2 inch and 1-3/8 inch lock cylinders to fit into a 2-1/8 inch diameter bore. Comes with everything you need for a quick and easy installation.

The Segal SE 26010 Entry Door Lockset is designed for use on exterior entry doors, so you can enjoy the beauty of yesterday's vintage hardware with the strength of modern-day security hardware. The set includes a night latch for added security. The right-handed exterior lockset can be used on entry doors of 1-3/8 inch to 1-3/4 inch thick to match interior vintage style hardware. The doorknobs of this lock set are constructed of diecast and reinforced steel components with a solid brass interior trim plate. The lock is finished with a beautiful brass finish. This mortise door lock has a 2-1/2 inch backset, 1-1/16 inch x 7-5/8 inch faceplate, 9/16 inch latch projection, 1 inch deadbolt projection, and has 2-1/4 inch in diameter knobs. For further dimensional information, please see the line drawing and compare with your needs before purchasing.

This lift and turn drain assembly is constructed of zinc diecast and comes in a chrome plated finish. It features an O-ring seal and fine thread at 16 thread per in. TPI (threads per Inch).

This door pull plate is constructed from brass and comes finished in a polished brass finish. It features a removable PVC protective coating that provides protection to the plate’s surface during installation. These door pull plates are used to cover holes, protect the door’s surface and to provide a durable pull handle for commercial and residential swinging doors.

Satin Nickel

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

Beautiful and classy.. Linda. NY. Mon Aug 11 2025

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Beautiful. Would be better if all the screws were long. You get 2-1” screws and 1- 3”screw. It’s also a little pricey compared to the black and silver. It would be nice if they’d make a satin gold instead of the shiner old fashion gold.. Angela. Fort Worth, TX. Wed Jan 11 2023

This is a 3-1/2 in. diameter door cover plate. It will cover marred doors and allows a conversion from 2-3/8 in. to 2-3/4 in. backset, or 2-3/4 in. to 2-3/8 in. backset.

Defender Security U 9546 Brass Lock and Door Reinforcer assists in preventing forced entry by reinforcing the weak spot of an entry door. It can be used to reinforce and repair both metal and wood doors. Made of solid brass construction, the lock reinforcer plate comes finished in brassl. All the necessary mounting hardware is included for a quick and easy installation. The lock reinforcement plate is pre-punched for mounting. The reinforcer is designed for 1-3/4 inch thick doors that have mortise or drive-in latches. It features two 2-1/8 inch bores that are 3-5/8 inch on center, with 2-3/4 inch backsets. The door reinforcer is non-recessed. Please refer to the line art drawing for dimensions and compare to your needs before purchasing (Not Universal).

This is a foam screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.145 inch in diameter. It is a top quality, round, smooth polyethylene with a flexible foam core. This is also an excellent substitute for metal spline. Color is black. 500 ft. per roll.

This Keyed Deadbolt Lock by Prime-Line Products is a flush mounted, spring-loaded deadbolt lock that is easy to install with only a few simple tools. It is key locked from the inside, and it comes with three different keepers, which offers flexible mounting options for both inswing and outswing hinged doors. For best results, follow the installation instructions included with each package. This lock is constructed of diecast materials and comes in a corrosion-resistant, brass-plated finish.

Nice lock that was way better than a hasp and padlock.. Anonymous. Thu Feb 26 2026

Bronze

Easily build, repair, and replace missing or damaged window screen frames with this Prime-Line Window Screen Frame. The aluminum window screens frames may be used in combination with solar screen fabric (sold separately) to create effective sunscreens that mount on the outside of your windows to block most of the sun's hot rays from entering your home. The aluminum screen frame is constructed with a thicker spline channel for added support. With everything needed in this window screen frame kit to make brand-new window screen frames, you can easily replace one that is missing or damaged. Frame materials are straightforward to work with, easy to cut to size and assemble. The window screen frame replacement measures 5/16 inch x 3/4 inch x 60 inch x 60 inch. Please refer to the line-art for dimensional information and compare with your needs before purchasing. Use PL 7808 for Bronze screen frame and use PL 7814 for white screen frame.

This garage door quick turn fixture is constructed from heavy-duty galvanized steel. It is designed for use in low headroom garage door conditions. It is perfect for use where automatic openers are installed.

1.5" H x 6" W x 15.5" D, Matte Black

This is a solid brass door reinforcer in a classic bronze finish. Helps prevent a forced entry. Typically used on wood or metal doors that are 1-3/8 in. thick with mortise or drive-in latches. Accommodates key-in knob locksets or deadbolts, or combination locksets. It features one 2-1/8 in. bore with a 2-3/8 in. backset.

This is the item ordered but not the item that was sent to me!. Michelle. Kingsville, ON. Wed Sep 21 2022

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.