Primeline N 6654

Pure White

Enhance your SuiteSymphony 25 inch-wide base unit or closet organizer with these laminated wood doors (2). Made with self-closing European-style hinges, these doors come with all installation hardware and fit perfectly with other SuiteSymphony accessories. Create a complete and stylish closet system by combining with SuiteSymphony towers (sold separately).

Easy to install. I like how the doors can cover the shelves.. Casi. Caledonia, MI. Sat Jul 15 2023

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Mon Jun 23 2025

Complete your at-home laundry care system!

Appearance wise it is small, but it can fit 2 large coats. Tina. Fri Jan 16 2026

[This review was collected as part of a promotion.] Overall great appliance, that I am still playing with, but I wish it would have 2 more features: 1. easier to understand when to put what clothes to what setting (refresh. sanitize, dry, etc.) 2. some weights that pull the clothes down so that they come out not wrinkled. 4bella. Hopkinton, MA. Sun Jun 16 2024

Classic Bronze

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Mon Jul 08 2024

1.88" H x 6" W x 12" D, Stainless Steel

This combo lock and door reinforcer is constructed of stainless steel and fits 1-3/4 in. thick doors. Assists in preventing forced entry by reinforcing the weak spot of an entry door, and it can be used on both metal and wood doors. Accommodates key-in knob locksets on doors These door reinforcers are easy to install and they are used by many. All installation fasteners are included with this item. This guard features a 2-1/8in bore, 2-3/8in backset, 1-3/4in door thickness.

Bronze

Add an extra layer of security to your home with this Defender Security Door Reinforcement Lock. Designed to withstand 800 lbs. of force, you can rest easy knowing your family is safe and protected! This reinforcement lock has a spring-loaded design, aluminum construction and a bronze anodized finish. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness, and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and this door reinforcement lock comes with 3 inch hardened screws. Extra home security and peace of mind are well within reach, and doesn’t have to come with the high price tag of an alarm system! Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner.

I'm happy I bought this. Additional security and stylish.. Veronica. Fort Worth, TX. Fri May 22 2026

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Debra. New Braunfels, TX. Thu Jun 04 2026

Galvanized Steel T-Post has a one-piece, 2-inch diameter center post! This makes the tall center pole stronger and stops the pole from twisting and turning. The 32-inch wide crossbar attaches to the top of the pole and includes eyelet screws to anchor up to 7 lines of clothesline (clothesline sold separately). The galvanized steel is rust-resistant, unlike untreated steel posts. This helps your setup last longer--important since you are concreting it into the ground! Once installed, the top of the 90-inch t-post will be approx. 6.5 feet tall (or lower if installed deeper in the ground). This clothesline pole includes pole endcaps and all hardware necessary to set up a single post (additional posts are sold separately; typically 2 posts are required to set up a clothesline). So hang loads and loads of laundry, one after another or all at once! This fellow can handle it. So you get sun-kissed laundry, a lower electric bill, and an easier time hanging up the laundry. Win. This is a single T-Post only; the clothesline and additional post(s) are sold separately.

Nice and sturdy. The poles are one piece so they won't twist in the wind, and the tallest we could find.. Nita. Fairfield, IA. Fri Dec 05 2025

Brushed Brass

Happy with the quality of the product. Edward. Talent, OR. Sun Jul 25 2021

These extended lip latch strikes are constructed of solid brass and come in a polished brass finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with each package. These latch strikes are used by many on wide jambs with decorative molding. Adjustment tip: to eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.

I was glad to find this extra length strike plate at your site, because I couldn't find anything like it in hardware stores, was about to make one out of brass myself.. Anonymous. Thu Aug 17 2023

These T-27 Torx screws are used together with T-27 barrel nuts where tamper-proof installation hardware is preferred. The heads require a specific screwhead to install or remove the typical Torx head cannot be used.

These pilaster shoe kits are constructed of an 18 ga. steel anchor bracket and a 22 ga., satin finished stainless steel pilaster shoe. They feature a 3 in. tall reach and oval ends. Each bracket is slotted at the horizontal base, on each end for ease of install. The anchor brackets are used to install the pilaster shoes in commercial restroom partitions, and all installation fasteners are included with each kit.

3/8 in

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sat Feb 21 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Wed May 28 2025

Stainless Steel, 6.15" H x 3.9" W x 0.45" D

Prime‑Line® socket head cap screws provide high‑strength, precision fastening for applications that require a secure hold in tight or limited‑clearance spaces. Designed with a cylindrical head and internal hex (Allen) drive, these screws allow for greater torque application while maintaining a clean, low‑profile appearance. Ideal for metal‑to‑metal assemblies in machinery, appliances, automotive repairs, tools, fixtures, and specialized hardware projects, Prime‑Line socket head cap screws are intended for use with same‑size matching nuts and washers or threaded holes to ensure proper fit and dependable performance. Manufactured from quality materials for durability and consistent thread accuracy, they install easily using standard hex keys or Allen wrenches. Trusted by DIY homeowners and professionals across the U.S., Prime‑Line socket head cap screws make it easy to achieve strong, compact, and professional‑grade fastening.

This bottom hinge kit includes components constructed of various materials, and the main hinge bracket comes in a chrome-plated finish. The post-mounted gravity pivot hinge bracket fits on 1-1/4 in. thick posts and panels that have round cut edges. This bracket features a 1-5/32 in. key dimension, and the T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with centre pins. The pintle has an outside diameter of 5/8 in.. This hardware is designed for use with partition hardware by Flush Metal.

Stainless Steel, 3.85" H x 4.3" W x 0.3" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

Nickel

Enhance door security with this premium hotel door blocker, a trusted solution in the hospitality industry and beyond. Designed for in-swinging doors, this secondary lock prevents forced entry from the outside while allowing the door to open slightly for safe visitor identification. Commonly installed in hotels, motels, and commercial properties, it’s also ideal for homes, rentals, and offices seeking added security. Unlike traditional flip latches or chain locks, this blocker minimizes damage caused by slamming doors, preserving both door frames and hardware. Its durable satin chrome-plated finish delivers a professional, modern look that blends seamlessly with most décor styles. Easy to install with the included mounting hardware, this door blocker provides an effective upgrade to standard door locks without requiring specialized tools. Durable, stylish, and functional, it offers peace of mind for property owners and occupants alike.

Was my mistake. This item is not good for my door, but I give this item to my friend they can use it for there door.. Zoila. Jackson Heights, NY. Mon Mar 31 2025

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Fri Feb 13 2026

This is a foam screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.145 inch in diameter. It is a top quality, round, smooth polyethylene with a flexible foam core. This is also an excellent substitute for metal spline. Color is black. 500 ft. per roll.

Black

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

Satin Nickel

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

4.4" H x 4.7" W x 1.05" D

Prime‑Line® clothesline hooks provide a simple, dependable solution for hanging and supporting clotheslines, ropes, and cords around the home or yard. Designed for easy installation into wood, walls, or posts, these hooks offer reliable holding strength for indoor and outdoor laundry setups, gardening projects, garage organization, and general utility use. Manufactured from quality materials for durability and corrosion resistance, Prime‑Line clothesline hooks are built to withstand daily use and varying weather conditions while keeping lines securely in place. Their open‑hook design allows for quick attachment and removal, making adjustments fast and convenient for DIY homeowners. Trusted by households across the U.S., Prime‑Line clothesline hooks make it easy to set up, maintain, or upgrade functional hanging solutions with confidence and ease.

Bronze

Easily build, repair, and replace missing or damaged window screen frames with this Prime-Line Window Screen Frame. The aluminum window screens frames may be used in combination with solar screen fabric (sold separately) to create effective sunscreens that mount on the outside of your windows to block most of the sun's hot rays from entering your home. The aluminum screen frame is constructed with a thicker spline channel for added support. With everything needed in this window screen frame kit to make brand-new window screen frames, you can easily replace one that is missing or damaged. Frame materials are straightforward to work with, easy to cut to size and assemble. The window screen frame replacement measures 5/16 inch x 3/4 inch x 60 inch x 60 inch. Please refer to the line-art for dimensional information and compare with your needs before purchasing. Use PL 7808 for Bronze screen frame and use PL 7814 for white screen frame.

Restore security and maintain a clean, finished look on your doors with the Prime-Line U 10889 Door Knob Hole Cover Plate. Designed to cover unused knob or deadbolt openings, this durable plate helps prevent unwanted access while improving privacy. It’s an ideal solution for doors where hardware has been removed or relocated, helping eliminate exposed holes that can compromise safety or appearance. This versatile cover plate accommodates hole sizes ranging from 1/2 inch up to 2-1/8 inches in diameter, making it a practical option for a wide variety of door repair and upgrade projects. With a 2-5/8 inch outside diameter, it provides full coverage while maintaining a low-profile, professional look. It is designed to fit doors up to 1-3/4 inches thick, making it compatible with most standard residential doors. Constructed from heavy-duty steel, this hole cover offers reliable strength and long-lasting durability. The bronze finish adds a modern touch while resisting wear, blending seamlessly with existing door hardware. Whether you're updating entry doors, securing interior spaces, or improving property appearance, this plate delivers both function and style. Installation is quick and simple with just two fasteners, making it an easy DIY fix for homeowners and professionals alike. For best results, review the line drawing to confirm dimensions and compatibility before purchasing.

Stainless Steel, 6.05" H x 3.85" W x 0.55" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

These Prime-Line U 10169 Steel Shelf Support Pegs make sure your shelves stay in place, with a 20 pound maximum safe load per peg. Constructed of steel, the shelving pegs come with a nickel plated finish and are strong and durable. These shelving support pegs are easy to install and used in many shelf support applications. Each shelving peg has a 1/4 inch diameter with 5/32 inch screw mounting hole. For further dimensional information, please see the line drawing.

Nice to have extras in case the others fall out and get lost. Toni. Oldsmar, FL. Tue May 05 2026

These are bore reducer rings. Constructed of steel and comes brass-plated. They allow 1-1/2 inch and 1-3/8 inch lock cylinders to fit into a 2-1/8 inch diameter bore. Comes with everything you need for a quick and easy installation.

These plastic turn buttons are used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw.

Matte Black

This color matching Bullnose Supply Tube is the perfect way to finish a bathroom.

Really nice and heavy Used in a pedestal sink situation. Stephanie. Sag Harbor. Wed Mar 06 2024

Enjoy the freshness of drying your clothes in sunshine and breezes, take in the day, and save a little in your pocketbook with the help of this product. This product features an adjustable height feature that allows it to be lowered for those of us not blessed with long arms or legs! The angled lines increase airflow, improving circulation throughout your hanging garments. Its 12 lines (197' of drying space!) let you air multiple loads at once, giving all your clothes that sun-kissed scent. This dryer, with its lightweight aluminum design, rotates in its base for easy access. With its fold-down structure and ground sleeve, it is easily removed and stored during inclement weather, protecting your dryer and keeping your lines clean. So take a step back in time and hang your laundry like Grandma—reap the benefits in spirit and lower utility bills.

I love it. I have it at camp and it’s really strong. Holds plenty of clothes even in strong winds.. Leda. Saranac, NY. Tue Apr 07 2026

These are window screen stretcher clips with screws are constructed from stamped aluminum. They fit most 3/8 inch x 3/4 inch frame applications. Often used to attach your window screens to awning and other types of windows.

This is a casement operator track that is riveted or screwed onto the bottom of a steel casement window. It fits the older style casement operators Prime–Line parts H 3500 through H 3523, and H 3581 through H 3588. The guide disc on the tip of the operator glides through the track to open or close the window.

Mega single outdoor clothesline t-pos with white finish! It resists rust for long-term outdoor use. Sets in concrete in the ground. Sturdy set up with sectioned vertical posts with wedged sides. Add concrete inside the lowest pole during set-up for additional stability! The spacious cross bar includes eyelet screws for hanging lines. Clothesline and second t-post are sold separately.

These are sturdy and do a wonderful job of letting us dry all our Comforters in the summer without using the dryer and electricity.. Melissa. Kentucky. Sun Feb 08 2026

It is a surface-mounted Bobrick-style latch that is designed for use on swing-in partition doors, and it comes complete with a matching keeper and stainless steel fasteners. This latch mounts over a durable, black plastic base with its mounting holes spaced apart. This restroom stall slide latch also features a tension adjustment clip that is embedded within the black plastic mounting plate, concealed beneath the stainless steel surface of the lock. The tension clip can be adjusted to create or reduce resistance between the plastic insert and the metal housing. Setting the amount of force needed to slide the latch from left to right is as easy as bending the clip away from the plastic base to increase the tension, and bending it towards the plastic base to decrease tension. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

4.75' H x 1.85' W

These shelf pegs are constructed of plastic and come in a clear finish for increased concealment. They are designed to receive 1/2 inch thick shelves and can support a maximum of 5 pounds each, per peg. The main feature of these shelf pegs is the self-locking tabs that secure the 1/2 inch thick shelves in place, preventing tipping and rotating of shelves. The 1/4 inch outside diameter pegs have a 5/16 inch depth and feature serrated stems for a stronger grip. Adjustment Tip: To remove and relocate these support pegs, the tabs which lock in the shelves must be pushed in and held in while twisting the shelf upward in a clockwise direction if lifting the shelf from the left side. If shelf will be lifted upward starting from the right side, push and hold in the locking tabs of the support pegs (on the right) while twisting the shelf upward in a counter-clockwise direction from the right side. To accomplish this task a third or fourth hand may be required. Another option would be to slide in a couple of old credit cards or business cards in between the shelf's edge and the locking tab of the support pegs. This may assist causing the locking tabs to be pressed in by the cards when pushing up on one side of the shelf. Make sure the cards to be used are no longer needed as it is possible they will scratch and no longer be useful. Once the shelf is removed from its supports, the supports can be pulled out from the cabinet and relocated to desired height.

Bronze

Whether you are trying to keep your toddler from opening the basement door, adding an attractive and functional enhancement to your closet doors or securing cabinets in your RV, the Prime-Line surface bolt is the versatile locking solution. Easy to install and constructed of durable solid brass, the 4 inch long surface bolt can be mounted horizontally or vertically and includes a surface mount keeper and a mortise-style keeper to accommodate a variety of applications. With a couple finishes, the surface bolt is not only effective, it’s attractive too. It’s a great alternative to traditional child (and pet) proofing products that can be hard to install and not complementary to your home décor. You can install the surface bolt out of the reach of curious little hands, so babies, toddlers and young kids cannot enter or exit into dangerous areas or go through cabinets and closets without supervision.

Antique Brass, 9.75" H x 5.2" W x 2.45" D

Upgrade your door security with this antique brass lock and door reinforcer, designed to help prevent forced entry by strengthening the vulnerable area around your lock. Perfect for repairing or reinforcing both metal and wood doors, this plate fits 1-3/4-inch thick doors with mortise or drive-in latches. Crafted from durable solid brass or stainless steel with an elegant antique brass finish, it features two 2-1/8-inch bores spaced 3-5/8 inches apart and offers backset options of 2-3/8 inches or 2-3/4 inches. The non-recessed plate comes pre-punched for easy installation, and all necessary mounting hardware is included. Please review the line art drawing for exact measurements before purchasing, as this item is not universal.

This is a drapery cord tension spring and pulley. Use these springs and pulleys to keep your cords in order. With these installed, it is easy for one handed operator of your shades and drapes. Each package contains 2 white plastic with springs. Provides proper cord tension. Has a universal application with most manufacturers. It is spring-loaded so it can make minor adjustments while you pull the cord.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

Secure and restore your door hardware with the Prime-Line E 2299 Standard T-Strike Door Latch Strike. Designed for versatility, this latch strike functions as both a reliable replacement for worn components and a secondary locking option for sliding screen doors. Compatible with both wood and metal jambs, it provides a flexible solution for a wide range of residential applications. Constructed from solid brass with a durable stainless steel-plated finish, this strike plate delivers long-lasting performance while maintaining a classic, traditional appearance. The latch guard cover is engineered to work with most Grade 2 locksets and meets ANSI A156.2 standards, ensuring dependable functionality and compatibility with common door hardware systems. Installation is quick and straightforward with all necessary mounting hardware included, making it ideal for DIY repairs or upgrades. Measuring 1-1/8 inch by 2-3/4 inch with 2-1/8 inch on-center mounting holes, this strike plate is designed for precise fit and easy replacement. Perfect for maintenance, repair, or security upgrades, this Prime-Line latch strike combines durability, ease of use, and trusted performance. Always review dimensions to confirm compatibility before purchasing.