Primeline N 6576

Cobalt Blue

Opulence - solid soft plush velvet upholstery fabric, a symphony of lavishness and comfort that brings a new level of luxury to your interior design endeavors. Elevate your spaces with the unmatched allure and sumptuous texture of this exquisite fabric, meticulously crafted to redefine both style and indulgence, one yard at a time.

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Mon Jun 23 2025

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

Brass

Add an extra layer of security to your home with this Defender Security Door Reinforcement Lock. Designed to withstand 800 lbs. of force, you can rest easy knowing your family is safe and protected! This reinforcement lock has a spring-loaded design, aluminum construction and a bronze anodized finish. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness, and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and this door reinforcement lock comes with 3 inch hardened screws. Extra home security and peace of mind are well within reach, and doesn’t have to come with the high price tag of an alarm system! Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner.

I'm happy I bought this. Additional security and stylish.. Veronica. Fort Worth, TX. Fri May 22 2026

Brass

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Mon Jul 08 2024

White

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

These T-27 Torx screws are used together with T-27 barrel nuts where tamper-proof installation hardware is preferred. The heads require a specific screwhead to install or remove the typical Torx head cannot be used.

Chrome, 6.05" H x 3.8" W x 0.85" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

These shower door bottom guides are constructed of plastic and come clear in color. The channels feature . wide openings that will allow for use with up to 3/16 in. thick frameless glass panels. Use of these glue-in bottom-mount guides will help keep hanging glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

Great replacement. Anonymous. Mon Sep 22 2025

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Viren. Tustin, CA. Sat May 11 2024

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

Chrome

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted latch and it features a side- or face-mountable keeper with installation fasteners for both. This patio sliding screen door latch can be used on both single-active panel and dual-active panel sliding screen doors. These sliding screen door latches are extremely versatile. Sliding screen door locks like these provide secure latching capabilities as a primary or secondary latch. Secures sliding screen door from accidentally opening by pets or other animals. Order yours today and make your sliding screen door secure again.

This was a good alternative to the latch I wanted that you had but was out of stock.. Kevin. Minneapolis, MN. Mon Feb 06 2023

Stainless Steel, 6.05" H x 3.85" W x 0.55" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

8.4" H x 3.75" W x 0.95" D, White

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Beautiful. Would be better if all the screws were long. You get 2-1” screws and 1- 3”screw. It’s also a little pricey compared to the black and silver. It would be nice if they’d make a satin gold instead of the shiner old fashion gold.. Angela. Fort Worth, TX. Wed Jan 11 2023

This strike and keeper is constructed from Chrome Plated Zamak. Keeper is 1-1/4 inches X 2-3/8 inch X 2-9/16. Fits on 1-1/4 inch round edge posts and is used on inswing applications for Throw Latch (Emergency Entrance) and is ADA Compliant.

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

Surface-mounted hinge set, RH-in/LH-out, with fasteners, stamped stainless steel. Use with accurate, all American, amp, American sanitary, fiat, flush metal, global, general, met par, mills manufacturers.

0.625" H x 4" W x 2.5" D, Ivory

Flange nuts can help to save time by eliminating the need to use a separate nut and washer. The flange acts as a built in washer to distribute the load evenly. As with standard hex nuts, they can be installed using a wrench or socket set.

Designed for use with a concealed latching mechanism, it assembles easily with a push nut fastener. This lever set has a 1-5/8 in. outside diameter, and it features an overall reach of 2-13/16 inches with a flat, slotted emergency-access knob on the exterior. Lever sets like these are used to replace broken and missing lever and knob sets of concealed latches. This Lever set is used by Sanymetal for use with steel doors, and it is easy to install. Note: Assembly will be permanent upon the first unification of both parts. Attempting to separate the inside and outside knobs once joined may damage the internal push nut component.

This maximum security combination strike is constructed of stamped steel and it comes plated in a satin nickel finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush install.

Matched perfectly with our new door entry combo. Secure for sure. What a difference.. Anonymous. Sat Mar 07 2026

These shower door guides are constructed from white molded plastic. They are used to keep your shower doors properly aligned. They come complete with fasteners for a quick and easy installation.

Unplated

This restroom partition replacement hardware is designed to repair 1-inch thick panels. It is constructed of cast metal and finished in a bright chrome plated finish.

Secure and restore your door hardware with the Prime-Line E 2568 Standard T-Strike Door Latch Strike. Designed for versatility, this latch strike functions as both a reliable replacement for worn components and a secondary locking option for sliding screen doors. Compatible with both wood and metal jambs, it provides a flexible solution for a wide range of residential applications. Constructed from solid brass with a durable bronze-plated finish, this strike plate delivers long-lasting performance while maintaining a classic, traditional appearance. The latch guard cover is engineered to work with most Grade 2 locksets and meets ANSI A156.2 standards, ensuring dependable functionality and compatibility with common door hardware systems. Installation is quick and straightforward with all necessary mounting hardware included, making it ideal for DIY repairs or upgrades. Measuring 1-1/8 inch by 2-3/4 inch with 2-1/8 inch on-center mounting holes, this strike plate is designed for precise fit and easy replacement. Perfect for maintenance, repair, or security upgrades, this Prime-Line latch strike combines durability, ease of use, and trusted performance. Always review dimensions to confirm compatibility before purchasing.

Stainless Steel, 5.9" H x 3.95" W x 0.5" D

Prime‑Line® wood screws provide strong, reliable fastening for a wide range of woodworking, home repair, and construction projects. Designed with sharp points and deep, coarse threads, these screws deliver excellent holding power in solid wood, plywood, and particle board while helping draw materials tightly together. Ideal for furniture assembly, cabinetry, trim work, shelving, framing, and general household repairs, Prime‑Line wood screws install easily using standard hand or power tools. For best results, they are intended for use in properly sized pilot holes to help reduce splitting and ensure a secure, long‑lasting fit. Manufactured from quality materials for durability and consistent performance, Prime‑Line wood screws are trusted by DIY homeowners and professionals across the U.S. to complete projects with confidence and dependable results.

Aluminum

This is a left-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has an attractive finish with mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole. These stainless steel screws are rust and corrosion resistant.

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Fri Feb 13 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

perfect to upgrade the bifold doors I purchased.. Heather. Hendersonville, NC. Wed Dec 27 2023

Great price for a good product will purchase again from this company. Gkar. Reno, NV. Fri May 20 2022

These one-way barrel nuts are constructed of steel and come in a chrome plated finish. They feature a tamper-proof head which prevents them from being loosened or removed once installed. These fasteners are manufactured with #10-24 thread and have a reach of 5/8 in., with a 1/4 in. shaft outside diameter, and a 7/16 in. head diameter. One-way barrel fasteners like these are commonly used with one-way shoulder screws in commercial restroom applications. Installation of these types of security fasteners requires only the use of a (flat head) slotted screwdriver, while the removal of these fasteners requires a one-way screw remover tool.

Aluminum

This Prime-Line H 3959 is a universal folding crank handle that fits most casement operator crank spindles. It is diecast construction with a aluminum finish. The universal spline system fits most casement operators. It is easy to install. The folding design is often used to replace the normal crank handle to avoiding interference with window blinds.

This combo deadlatch and deadbolt strike is constructed from steel and comes in a brass-plated finish. It features six 3 in. long screws that provide maximum security. This type of combo is quick and easy to install. Replaces standard latch and deadbolt strikes with one piece. May be used to repair split or damaged door jambs. Compatible with hole spacing from 3-5/8 in. to 4 in. center to center. For best results, follow the installation instructions included with each package. These strikes are easy to replace using only a few simple tools. For further dimensional information, please see the line drawing.

These shower door bottom guides are constructed of plastic and come gray in color. Installation is easy with only two fasteners to replace, per the guide. The channels feature 1/2 in. wide openings that will allow for use with up to 7/16 in. thick glass panels. The use of these bottom-mount guides will help keep sliding glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

While not a perfect fit, it did the job. William. US. Mon May 12 2025

This maximum security combination strike is constructed of stamped steel and it comes plated in a classic bronze finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3-inch. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush installation.

fits standard 1 3/4 deep door. Daniel. Thu Sep 11 2025

Chrome

From finishes that are guaranteed to last a lifetime to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Bring elegance to your home with premium selections from Moen. From the sophistication of period Traditional to the streamlined refinement of minimalist contemporary, you'll find a host of amazing ways to express your style with products from Moen.

Good quality hose. Order arrived quickly.. Daniel. Belleville, MI. Thu Apr 16 2020

Chrome

From finishes that are guaranteed to last a lifetime to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Bring elegance to your home with premium selections from Moen. From the sophistication of period traditional to the streamlined refinement of minimalist contemporary, you'll find a host of amazing ways to express your style with products from Moen.

Finish matches my faucet. Looks great together. Marti. Northampton, PA. Fri May 15 2026

This Prime-Line M 6184 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy to install. The door sweep for the bottom of the door features a 3/32-inch round insert shape at its top. The 1-inch height and 37-inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare them with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

These Truth Hardware Sash Locks by Prime-Line Products are constructed of high pressure, corrosive resistant, diecast zinc and they come in a bronze baked-enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The mounting holes are spaced apart evenly, and they feature backset holes. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. These locks are easy to install and used by many.

Polished Chrome

iTempo Plus Steam Generator Control operates with an available wireless iGenie™ control. Mr.Steam® combines state-of-the-art technology and advanced display with a beautiful design to create Mr. Steam new in-shower iTempo Plus Steam Generator Control series.

Nice, heavy quality with a beautiful nickel finish. Have not used yet, will update once fully installed.. Amanda. MD. Tue May 02 2017

This door strike reinforcing kit by prime-line products is constructed of solid brass and comes in a beautiful, corrosion-resistant, classic bronze finish. This two-piece security strike kit allows for hole center flexibility in securing combination deadbolt and entry lock installation, as the two can be separate from one another as determined by existing door locking hardware. The deadbolt and entry lock strikes included in this kit replace most strikes and improves security with 3 in. Long screws are attached to the wall stud.

This cam housing door insert is constructed of zinc alloy (cast zamak) and it comes in a chrome plated finish. This item fits on partition door panels that have round edges and measure 1 inch thick. This hardware is designed for use with partition hardware manufactured by General.

From finishes that are guaranteed to last a lifetime and to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty, reliable and innovative design.

No wide spread enough. Managed to make it work by facing handles backwards instead of to the side. OK.. Claire. Henderson, NV. Tue Jan 30 2024

Chrome

The other two were getting hard to turn due to build up of some sort after 15 years. These were a perfect fit, and we didn’t have to buy the entire kit.. Rachel. Marietta, GA. Wed May 27 2026

This OUTSWING door latch set is constructed of zinc alloy (cast zamak) and comes in a chrome plated finish. These are the components included with this kit: One #650-2770 hook, one #650-6638 door stop, one #650-7265 top pivot hinge, #650-7262 bottom pivot hinge with 5/8 inch pintle, one #650-6530 strike & keeper, one ADA #650-9093 lever set, one #650-7205 candle cam and one #650-7663 pivot hinge pin, one (pair) of #650-2701 back-2-back door pulls with T-27 Torx security fasteners for installation of all components. These fasteners feature tamper-resistant 6-lobe security drives with center pins.

This package of 10 clear vinyl bumpers and included fasteners fit into tub enclosure jambs to help cushion the stop of sliding doors. The 3/4 inch diameter x 5/16 inch thick door bumpers are used to help cushion the door panels from slamming into the enclosure jambs. Jambs should be cleaned before installed with the supplied fasteners.