Primeline Mp71372

Restore smooth, dependable drawer operation with this Universal Wooden Drawer Track Repair Kit, designed to replace damaged, missing, or worn center-mount drawer hardware. Ideal for common household applications such as kitchen cabinets, bathroom vanities, dressers, and storage furniture, this kit includes everything needed to repair one wooden drawer track system without replacing the drawer or cabinet. The system features a 22‑5/8 inch galvanized steel monorail, which can be cut down to fit smaller openings and typically accommodates drawers around 21‑3/4 inches deep. Steel roller brackets with smooth-gliding molded plastic wheels replace worn guide buttons, allowing the drawer to open and close easily while maintaining proper alignment. A galvanized steel back plate and center guide help stabilize the drawer and reduce friction, preventing damage to cabinet face frames and drawer openings over time. Designed with the DIY homeowner in mind, the roller assemblies install directly into the inside lower left and right corners of the cabinet opening, and all required mounting hardware is included. With a maximum load rating of 20 pounds, this universal tri-roller system offers a practical, cost-effective solution for restoring everyday drawers that stick, wobble, or no longer track correctly. Be sure to review the included line art drawing and compare measurements before purchasing to ensure proper fit.

Brass

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Mon Jul 08 2024

8.4" H x 3.75" W x 0.95" D, White

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

These shower door bottom guides are constructed of plastic and come gray in color. Installation is easy with only two fasteners to replace, per the guide. The channels feature 1/2 in. wide openings that will allow for use with up to 7/16 in. thick glass panels. The use of these bottom-mount guides will help keep sliding glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

While not a perfect fit, it did the job. William. US. Mon May 12 2025

These shower door bottom guides are constructed of plastic and come clear in color. The channels feature . wide openings that will allow for use with up to 3/16 in. thick frameless glass panels. Use of these glue-in bottom-mount guides will help keep hanging glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

Great replacement. Anonymous. Mon Sep 22 2025

White

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

Gray, 30.13" H x 3.75" W x 1" D

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Fri Feb 20 2026

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

These shower door guides are constructed from white molded plastic. They are used to keep your shower doors properly aligned. They come complete with fasteners for a quick and easy installation.

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Mon Jun 23 2025

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Viren. Tustin, CA. Sat May 11 2024

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

These extended lip latch strikes are constructed of solid brass and come in a polished brass finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with each package. These latch strikes are used by many on wide jambs with decorative molding. Adjustment tip: to eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.

I was glad to find this extra length strike plate at your site, because I couldn't find anything like it in hardware stores, was about to make one out of brass myself.. Anonymous. Thu Aug 17 2023

This maximum security combination strike is constructed of stamped steel and it comes plated in a classic bronze finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3-inch. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush installation.

fits standard 1 3/4 deep door. Daniel. Thu Sep 11 2025

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Fri Feb 13 2026

Designed for use with a concealed latching mechanism, it assembles easily with a push nut fastener. This lever set has a 1-5/8 in. outside diameter, and it features an overall reach of 2-13/16 inches with a flat, slotted emergency-access knob on the exterior. Lever sets like these are used to replace broken and missing lever and knob sets of concealed latches. This Lever set is used by Sanymetal for use with steel doors, and it is easy to install. Note: Assembly will be permanent upon the first unification of both parts. Attempting to separate the inside and outside knobs once joined may damage the internal push nut component.

This maximum security combination strike is constructed of stamped steel and it comes plated in a satin nickel finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush install.

Matched perfectly with our new door entry combo. Secure for sure. What a difference.. Anonymous. Sat Mar 07 2026

This Prime-Line M 6184 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy to install. The door sweep for the bottom of the door features a 3/32-inch round insert shape at its top. The 1-inch height and 37-inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare them with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

This outswing keeper is used with slide latch, fits on a square edge 3/4 inch post, it is constructed of satin cast stainless steel, the strike keeper measures 2-1/2 inch x 1-7/16 inch x 1-7/8 inch. The mounting holes are at 1-1/2 inch.

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

This Prime-Line J 4636 Door Push is designed for use on any swinging door to help prevent scuff marks or other damage. Installation of this swinging door protector is quick and easy with the included hardware and pre-drilled mounting holes. Constructed from stainless steel with a removable PVC protective coating, this push plate has a stainless steel finish. This door protection plate measures 8 inch by 16 inch and is designed for use on 18 inch doors. For further dimensional information, please see the line drawing and compare with your needs before purchasing.

This package of 10 clear vinyl bumpers and included fasteners fit into tub enclosure jambs to help cushion the stop of sliding doors. The 3/4 inch diameter x 5/16 inch thick door bumpers are used to help cushion the door panels from slamming into the enclosure jambs. Jambs should be cleaned before installed with the supplied fasteners.

14.35" H x 4.9" W x 1.55" D, Black

This sliding patio door handle set is designed as a direct replacement for broken or worn flush-mounted, hook style door handles. Constructed with a mix of durable diecast components and a natural wood inside pull, the set combines strength, style, and functionality. The exterior locking pull features a chrome finish, while the interior supports are finished in chrome for a modern look. The inside pull showcases a clear-finished wood handle, adding a touch of warmth to your sliding door. This non-handed handle set fits both left- and right-handed sliding doors and installs easily on doors 1 inch to 1-1/8 inch thick with 6-5/8 inch hole center spacing. It comes complete with a keyed exterior lock, two keys, four interchangeable hook lengths (3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch), and a 2-11/16 inch keeper that mounts to the jamb. All fasteners and installation instructions are included, making it a convenient replacement solution. For proper selection, confirm the style, lock type, and center-to-center hole measurements match your existing hardware.

Good quality product which exactly fix.. Doug. Hernando, FL. Fri Jul 25 2025

Chrome

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted latch and it features a side- or face-mountable keeper with installation fasteners for both. This patio sliding screen door latch can be used on both single-active panel and dual-active panel sliding screen doors. These sliding screen door latches are extremely versatile. Sliding screen door locks like these provide secure latching capabilities as a primary or secondary latch. Secures sliding screen door from accidentally opening by pets or other animals. Order yours today and make your sliding screen door secure again.

This was a good alternative to the latch I wanted that you had but was out of stock.. Kevin. Minneapolis, MN. Mon Feb 06 2023

Do you have vinyl-framed single hung vertical sliding windows with loose-fitting, worn or missing locks? Besides adding a “new look” to your windows with a fresh set of locking hardware, these sash locks can help add peace of mind by restoring the security features on your single hung sliding windows that were manufactured by BetterBilt. Each lock features a cam-type locking mechanism that mounts on the checkrail of the innermost sash and engages into the keeper on the checkrail of the outermost sash. The locks are constructed of diecast zinc and come in a corrosion-resistant, industry standard, white-painted finish to match other existing hardware that may already be in the home or office. Each set includes one lock, one keeper, installation fasteners and simple instructions. Installation of these locks is quick and easy and can be done with a simple handheld Phillips head screwdriver. Other design features include a 5/16 inch narrow keeper, cam-action fastening, and 2-1/16 inch mounting hole centers. This model is a left-hand lock, and the right-hand lock is also available under the part number F 2626. Compare the style and dimensions of this lock to those required on your sliding windows and order yours today.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

The Prime-Line C 1194 Diecast and Wood Patio Sliding Glass Door Handle is an internal locking, hook style handle set and is non-handed allowing it to be used on both left and right-handed patio sliding doors. This sliding glass door handle set features an automatic unlatching option designed to prevent accidental lockouts, and it is used to replace damaged or missing internal locking hook-style handle sets on a majority of sliding glass doors. This glass sliding door handle set is constructed of mixed materials including wood and diecast components. The outside non-keyed locking pull and the inside support of the handle for sliding glass door are constructed of diecast and come finished in a white-painted color. The inside pull of the handle hardware set for sliding glass door is made of natural wood and is finished in a smooth, clear finish. The sliding glass door handle replacement is designed to fit 1 inch thick internally latching type doors using a 3-1/2 inch hole center spacing. Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.

Finally hardware that fits old sliding doors!. Marine. Bal Harbour, FL. Mon Nov 18 2024

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

Matte Black

Elevate Your Shower Experience with Confidence – Our premium metal trim kit delivers a durable, DIY-friendly solution designed for long-lasting performance and effortless installation. Specifically engineered for compatibility with Moen valves (models 2510, 2520, 2570, or 2590; valve and cartridge must be purchased separately). Crafted with robust metal construction for superior durability and reliability. The one-handed lever enables intuitive control of water temperature and flow for a comfortable, customizable shower experience. With clear, beginner-oriented instructions, even first-time installers can easily refresh their shower space without professional assistance.

Great looking and very well made. Jim. Hobe Sound, FL. Thu Jan 01 2026

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

This latch is constructed from solid aluminum and comes in a nice natural finish. It is used on wooden double hung windows to help retain your screen in its opening. The bottom lock easily mounts into the spline channel of your window screen.

This is an extruded aluminum adjustable bracket with glazing vinyl and chrome finish. Accepts up to 1/4 inch thick glass panels with a 3/4 inch outer diameter round edge nylon wheel. Used on frameless shower doors.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

perfect to upgrade the bifold doors I purchased.. Heather. Hendersonville, NC. Wed Dec 27 2023

Zinc Plated, 3.6" H x 3.8" W x 0.85" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

This white powder–coated replacement latch lever kit is designed for use with Prime–Line part C 1280 and other surface–mounted levered handles. It includes everything needed for a quick and secure installation: 1 flat plastic washer, 1 wave washer, 1 lever pin, and 1 push nut. Made from durable diecast zinc with a white finish, this lever ensures long–lasting performance and a clean look for your sliding door handle set.

Parfait. Anne. Lavaltrie, QC. Wed Nov 27 2024

Aluminum

This is a left-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has an attractive finish with mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

These Truth Hardware Sash Locks by Prime-Line Products are constructed of high pressure, corrosive resistant, diecast zinc and they come in a bronze baked-enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The mounting holes are spaced apart evenly, and they feature backset holes. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. These locks are easy to install and used by many.

Stainless Steel, 6.05" H x 3.85" W x 0.55" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

Chrome

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This deluxe, non-handed, sliding screen door latch and pull is constructed of diecast metal and it comes in a stylish finish. It is a surface mounted latch and keeper, designed for interior installations. This latch can be used on both single and double sliding doors, it is extremely versatile and comes with all the necessary mounting hardware for a complete installation. Order yours today and make your sliding screen door secure again.

This strike and keeper is constructed from zinc alloy with a chrome plated finish. Often found on restroom partition walls that are 1-1/4 inch thick. They are easy to install.

These horizontal bit key Locksets by Prime-Line Products are constructed of diecast metal and stamped steel components. The housing and keeper come in a black-painted finish, and the door knobs and rosettes come in a brite brass-plated finish to match other existing brass-finished hardware in the home. These types of locking devices are surface-mounted and do not require any mortise pockets to be drilled into the door panel edge. All systems are keyed-alike, and spare keys are available upon special order. Keyed different are not available. These locksets are for use on interior doors only, but they cannot be mounted on doors with pre-bored holes for modern-day door knobs.

Though the knob is not solid brass, for the price this is a very nice rim lock and looks great on the door in my 1852 farmhouse. It looks much more expensive than it is. I am pleased.. Alice. Madison Heights, VA. Fri Feb 06 2026

Aluminum

This Prime-Line H 3959 is a universal folding crank handle that fits most casement operator crank spindles. It is diecast construction with a aluminum finish. The universal spline system fits most casement operators. It is easy to install. The folding design is often used to replace the normal crank handle to avoiding interference with window blinds.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

13-1/2 Inch

This Prime-Line H 3571 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

EXACTLY what I needed and works like new.. Anonymous. Wed Oct 02 2024