Primeline Mp5035

3

These House Address Numbers by Prime-Line Products are constructed of plastic and come black in color. They are commonly used on homes, mailboxes, apartment doors, hotel/motel doors, businesses, office doors, strip malls, classroom/education facility doors, dormitories, industrial complexes and etc. These also help to ensure increased visibility of addresses and/or room numbers. Using only a few simple tools, these house address numbers are easy to install. For best results, follow the installation instructions included with each package.

Nice numbers, but the holes for the nails to go through are too small on some of the numbers. I hope they don’t crack when I hammer them in.. Anonymous. Sun Mar 29 2026

These shower Door bottom seals by Prime-Line Products are constructed of vinyl and come clear in color. They feature water-deflecting flaps that extend 5/16 in. beyond the frameless glass shower door bottoms. These seals mount onto the bottoms of 3/8 in. thick frameless glass shower doors, and fit glass panels that measure up to 36 in. wide. These are slip-on-fit seals and no adhesive is necessary. These seals are used by many shower door manufacturers.

Does a great job keeping the water in the shower.. Gina. Mayfield Heights, OH. Fri Apr 18 2025

15.7" H x 1.8" W x 0.45" D, Nickel Plated

These Handyman Single Loop Closed Extension Springs are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Springs like these are used for a variety of household and professional applications, and they feature a generous deflection length of 22 inch. These springs are easy to install and are used by many. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Mon Jun 23 2025

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Beautiful. Would be better if all the screws were long. You get 2-1” screws and 1- 3”screw. It’s also a little pricey compared to the black and silver. It would be nice if they’d make a satin gold instead of the shiner old fashion gold.. Angela. Fort Worth, TX. Wed Jan 11 2023

1.2" H x 2.55" W x 1.5" D, Satin Nickel

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Wed May 17 2023

These window grid retainer pins are constructed of plastic bodies with steel needle point pins and they come clear in color. They feature a 3/4 inch long plastic shafts and 1/4 inch long plastic retainer sleeves, ideal for mounting mullion grids over the glass area of wood windows. These window grid retainer pins are used for securing decorative mullions to stationary and operating wood windows of all types and sizes.

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

4.4" H x 4.7" W x 1.05" D

Prime‑Line® clothesline hooks provide a simple, dependable solution for hanging and supporting clotheslines, ropes, and cords around the home or yard. Designed for easy installation into wood, walls, or posts, these hooks offer reliable holding strength for indoor and outdoor laundry setups, gardening projects, garage organization, and general utility use. Manufactured from quality materials for durability and corrosion resistance, Prime‑Line clothesline hooks are built to withstand daily use and varying weather conditions while keeping lines securely in place. Their open‑hook design allows for quick attachment and removal, making adjustments fast and convenient for DIY homeowners. Trusted by households across the U.S., Prime‑Line clothesline hooks make it easy to set up, maintain, or upgrade functional hanging solutions with confidence and ease.

This Prime-Line M 6184 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy to install. The door sweep for bottom of door features a 3/32 inch multi tee shaped insert shape at its top. The 1-7/16 inch height and 36 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

It worked well. I did need to trim it down.. Gordon Mi. Phoenix, AZ. Fri May 09 2025

This Prime-Line M 6184 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy to install. The door sweep for the bottom of the door features a 3/32-inch round insert shape at its top. The 1-inch height and 37-inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare them with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

This Bi-Fold Door top or bottom pivot bracket by Prime-Line Products is constructed from stamped steel and it comes in a corrosion-resistant, zinc-plated finish. The bracket easily mounts into the top or bottom bi-fold door track, and it used by many manufacturers. These pivot brackets are easy to install with a few simple tools. It fits into a top or bottom track and helps to reduce binding at the pivot. Used on metal bi-folding doors.

The Prime-Line N 6730 Adjustable Bottom Pivot Pin Assembly is designed for use on Benchmark bi-fold doors. It fits into steel framed bi-fold door panels. This folding door hardware kit rod is threaded on the two ends with a nut, washer, and Tinnerman clip attached for easy installation. The bi-fold door hardware repair kit has a steel rod construction with a nylon cap, making it strong, durable, and built to last. The rod of the door pivot repair kit is 1/4 inch in diameter and 5-1/2 inches long. The closet door replacement parts pivot cap is 3/8 inch in diameter. Please refer to the line art drawing for closet door parts dimensions and compare to your needs before purchasing.

Part was hard to find, but you guys had it and it worked perfect. Corey. Sherwood Park, AB. Mon Oct 07 2024

These are bore reducer rings. Constructed of steel and comes brass-plated. They allow 1-1/2 inch and 1-3/8 inch lock cylinders to fit into a 2-1/8 inch diameter bore. Comes with everything you need for a quick and easy installation.

These unslotted security barrel nuts are constructed of steel and come in a chrome plated finish. These fasteners are manufactured with #10-24 threads and have a reach of 1/2 inch, with a 1/4 inch outside diameter, and a 1/2 inch head diameter. Unslotted barrel fasteners like these are commonly used with T-27 Torx and one-way tamper-proof shoulder screws in commercial restroom applications. Barrel nuts like these are also known as bolts and Chicago bolts in the fastener industry, and they are designed for use where through bolting is desired with a head on both sides, as commonly used for the installation of restroom stall hardware.

1" H x 1.65" W x 24.35" D

This non-tilt block and tackle channel balance is constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord and pulley system, but the plastic top and bottom guide shoes must be selected separately as they are not included with the balance itself. These window counter balances are used to counter-weight the moving sash on single and double hung vinyl windows. If your windows (sashes), are having problems staying up when opened, it may be that your sash balances or hardware needs to be replaced. The sash balances hold the weight of the window pane, over time, the springs can wear out or fail. Replace your sash balance for a smoother operation of your window and allow fresh air to enter your home with a window that stays open.

This is a white plastic housing, guide leg, and flat edge plastic roller. Used on rolleze windows.

This bottom hinge kit includes components constructed of various materials, and the main hinge bracket comes in a chrome-plated finish. The post-mounted gravity pivot hinge bracket fits on 1-1/4 in. thick posts and panels that have round cut edges. This bracket features a 1-5/32 in. key dimension, and the T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with centre pins. The pintle has an outside diameter of 5/8 in.. This hardware is designed for use with partition hardware by Flush Metal.

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

Brass, 5.4" H x 3.75" W x 0.5" D

This Security ASA Adjustable Door Strike by Prime-Line Products is constructed of steel and it comes in a chrome-plated finish. It is ideal for use on wood or metal door jambs. Constructed of solid steel, the strike plate features a polished brass finish and comes with combo screws for simple installation. Used on wood or metal jambs. For best results, follow the installation instructions included with each package. These strikes are easy to replace using only a few simple tools. For further dimensional information, please see the line drawing.

This bottom hinge kit includes components constructed of various materials, and the main hinge bracket comes in a chrome-plated finish. The post-mounted gravity pivot hinge bracket fits on 1 in. thick posts and panels that have square cut edges. This bracket also features a 1-9/32 in. key dimension, and its pintle has an outside diameter of 1/2 in. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with centre pins. This hardware is designed for use with partition hardware by General Applications.

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

Brown

These door viewer privacy covers are constructed of plastic and are available in two colors. They feature a large 1-1/2 in. outside diameter cover for privacy and easy gripping. This fixed security device provides privacy against the use of reverse peephole spy tool lenses, like cameras, scopes, and phone apps. Fixed door viewer privacy covers like these can be used on apartment doors, office doors, service doors, homes, dorms, etcetera. This privacy cover mounts with a base plate and two fasteners and features a self-closing cover that must be pushed upwards for viewing thru the door viewer.

Excellent choice. Maribel. Jersey City, NJ. Fri Jan 19 2024

This Prime-Line M 6040 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the gray bottom door sweep is easy to install. The door sweep for bottom of door features a 3/16 and 5/32 inch double tee shaped insert shape at its top. The 3/4 inch height and 36 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

This panel clip has a 1/16 in. tip that allows for secure attachment of storm windows or screen panels to storm door frame with a screw. Made of white nylon.

This Prime-Line M 6092 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the gray bottom door sweep is easy to install. The door sweep for bottom of door features a 3/32 inch multi tee shaped insert shape at its top. The 1-7/16 inch height and 36 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

These ID key tags are constructed of polystyrene (plastic) tabs and metal clips. The identification tags are oval in shape, and they feature hole at top for hanging purposes. Allows for the east identification of your keys. Each package contains 20 key tags.

This two piece strike and keeper is constructed from zinc alloy with a chrome plated finish. Mounting holes are 1-1/2 in. on center. Fits on any post size and is for outswing applications with a slide latch.

This Truth Hardware Maxim Locking Handle by Prime-Line Products is designed for use with Truth hardware only. It is constructed of diecast zinc and comes in a beautiful, corrosion-resistant, white-painted finish that will match other existing Truth hardware in the same white finish. The dimensions are 3/4 in. in width, has a 1-3/8 in. projection, and a 3-13-16 in. height. Features a multipoint lock for maximum security. Self-tapping Installation fasteners are included.

Christina. AB. Fri Sep 20 2024

This deadbolt strike by Prime-Line Products is constructed of heavy gauge steel and it comes in an antique brass-plated finish. This heavy duty deadbolt strike replaces most deadbolt strikes and increases security with the 3-inch screws included within each pack. Use of long fasteners allow the deadbolt strike plate to fasten deep into the wall stud beneath the thin 3/4 inch door jamb. The plate can be used with most entry door applications.

This is a F-tab patio door roller assembly with a 1-1/4 in. concave or grooved steel ball bearing roller. When the corner screw passes through the F- tab the assembly is captured by the side stile and bottom rail as the screw draws the two sides together. The housing is 3/4 in. wide and 1-3/16 in. tall with a dimple width of 7/8 in.. Used by Northrup series 600 doors and a variety of other patio door manufacturers.

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

This deadbolt strike plate is constructed of stamped stainless steel and comes in a satin finish. It features an 1/8 in. thick, heavy gauge stainless steel base which allows for 3 in. screws to be anchored into the wall stud. This two-piece high security deadbolt strike replaces standard exterior residential deadbolt strikes adding increased security to entry doors. This item includes one two-piece strike plate per package with fasteners. Pilot holes for 3 in. screw installation, and additional, deeper chiseling may be required flush install.

This 1-1/4 inch reversed F-tab tandem roller assembly is designed for Fleetwood and a variety of other sliding patio doors. It features two concave (or grooved) steel ball bearing rollers in an adjustable stamped steel housing for smooth, quiet operation. The housing measures 11/16 inch wide with a 13/16 inch flare, 1-1/8 inch tall, and 3-1/8 inches long. Rear adjustment allows precise alignment during installation, while the reversed F-tab mounting design ensures a secure fit. Perfect for DIY homeowners and contractors, this assembly restores reliable sliding door performance.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

These extended lip latch strikes are constructed of solid brass and come in a polished brass finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with each package. These latch strikes are used by many on wide jambs with decorative molding. Adjustment tip: to eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.

I was glad to find this extra length strike plate at your site, because I couldn't find anything like it in hardware stores, was about to make one out of brass myself.. Anonymous. Thu Aug 17 2023

This heavy gauge steel constructed strike comes plated in brass. It replaces most deadbolt strikes for increased security, a result of securing 3 in. screws to wall stud. The plate measures 1-1/4 in. wide by 3-5/8 in. long and is used with most entry doors.

This is a plain back patio door roller assembly with a 1-11/16 in. concave or grooved nylon ball bearing roller used by Arcadia and a variety of other patio door manufacturers. The stamped steel housing has a unique design that is 3/4 in. wide, 1-5/16 in. tall and 2-11/16 in. long with an adjustment screw located on the back end. See Prime-Line part D 1731 for the tall version.

6.35" H x 3.75" W x 0.45" D, Brass

This security deadbolt strike is constructed of stamped stainless steel and it comes in a satin finish. It features a 3/4 in. x 1-1/16 in. bolt opening to accommodate large bolt dimensions. This security strike is designed to replace the smaller deadbolt strike plates with a thicker 1/16 in. plate and two additional fasteners for maximum security. Installation of this strike will strengthen a locked door with the inclusion of two, 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot-hole drilling may be required for a flush install.

This Bi-Fold Door top or bottom pivot bracket by Prime-Line Products is constructed from stamped steel and it comes in a corrosion-resistant, zinc-plated finish. The bracket easily mounts into the top or bottom bi-fold door track, and it used by many manufacturers. These pivot brackets are easy to install with a few simple tools. It fits into a top or bottom track and helps to reduce binding at the pivot. Used on metal bi-folding doors.

This is a maximum security deadbolt strike that is constructed of stamped steel and it comes in a matte black finish. Designed to replace a standard strike plate for maximum security. Installation of this strike strengthens a locked door with six, 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush install. All the necessary mounting hardware is included for a quick and easy installation.

Nickel Plated

These Prime-Line Products deadbolt strikes are constructed of heavy gauge stamped steel and come in optional plated finishes. These heavy duty deadbolt strikes replace most others and they increase the security with the 3-inch screws included within each pack. Use of long fasteners allow the deadbolt strike plate to fasten deep into the wall stud beneath the thin 3/4 inch door jamb. The plate can be used with most entry door applications. These strike plates are easy to install and they are used by many.

Keep your shower door secure with this Prime-Line shower door catch. This is a steel shower door catch with a spring-loaded nylon tip. Designed to be attached to the door frame of swinging shower door and hold the door closed. Nylon latch allows for a soft but durable hold. The housing is designed to be adjustable with the elongated mounting slots which are 1 inch on center.

These storm door hinge pin kits include 6 sets of white nylon pins and bushings. They feature an overall height of 1-7/16 in. and 5/16 in. outside diameters. These nylon pins and bushings fit into the ends of storm door hinges to create pivot points, and they are used by Croft storm doors.