Primeline Mp186

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This sliding screen door handle and latch is non-handed and used as a replacement handle set for 1/2 inch extruded and roll-formed sliding screen doors. The handle has mounting holes 3 inch on center. Each factory sealed package include an inside handle, outside handle with a steel latch. The steel latch is 2-13/16 inches long with a 1/2 inch projection and slides up and down to engage the Prime-Line keeper A 148 (Not Included). Order yours today and make your sliding screen door secure again.

15.7" H x 1.8" W x 0.45" D, Nickel Plated

These Handyman Single Loop Closed Extension Springs are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Springs like these are used for a variety of household and professional applications, and they feature a generous deflection length of 22 inch. These springs are easy to install and are used by many. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

Bronze

Whether you are trying to keep your toddler from opening the basement door, adding an attractive and functional enhancement to your closet doors or securing cabinets in your RV, the Prime-Line surface bolt is the versatile locking solution. Easy to install and constructed of durable solid brass, the 4 inch long surface bolt can be mounted horizontally or vertically and includes a surface mount keeper and a mortise-style keeper to accommodate a variety of applications. With a couple finishes, the surface bolt is not only effective, it’s attractive too. It’s a great alternative to traditional child (and pet) proofing products that can be hard to install and not complementary to your home décor. You can install the surface bolt out of the reach of curious little hands, so babies, toddlers and young kids cannot enter or exit into dangerous areas or go through cabinets and closets without supervision.

This two piece strike and keeper is constructed from zinc alloy with a chrome plated finish. Mounting holes are 1-1/2 in. on center. Fits on any post size and is for outswing applications with a slide latch.

This is an extruded aluminum sliding doorkeeper. It is surface mounted for hook-style latches. The dimensions are 2-1/2 in. in length, with a 1-1/2 in. width. It is used by Viking doors.

1.2" H x 2.55" W x 1.5" D, Satin Nickel

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Wed May 17 2023

This Chain Door Lock is constructed of steel components and comes in a beautiful, corrosion-resistant, classic bronze finish. Typically these are used on inswing doors that you may want extra security on. With this door guard properly installed you can safely and securely either vent the room or open your door slightly. All the necessary mounting hardware is included for a quick and easy installation. Additionally this can be used as a child safety lock if mounted high enough for your child to not be able to reach.

Satin Nickel, 11" H x 4" W x 1.25" D

This is a maximum security combo strike that fits 5-1/2 in. and 6 in. hole spacing's on center dead latch and deadbolt. Uses six 3 in. screws that install on the vertical side of the strike closest to the stop molding. These 3 in. screws allow for a strong hold as they drive into the jack stud to help prevent kick-ins. Three #8 x 3/4 in. screws install on the side of the strike closest to the door.

This outswing keeper is used with slide latch, fits on a square edge 3/4 inch post, it is constructed of satin cast stainless steel, the strike keeper measures 2-1/2 inch x 1-7/16 inch x 1-7/8 inch. The mounting holes are at 1-1/2 inch.

This door strike is constructed of extruded aluminum and it comes in a clear anodized finish. It can be used with 1-inch thick restroom partition doors that swing-out. This flat strike features a tall black rubber bumper that measure 1/2 inch wide x 6-inch in height. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This traverse cord is constructed of high-strength, quality polyester fiber. Comes braided to support heavy draperies.

This Bi-Fold Door bottom pivot by Prime-Line Products is constructed of both steel and plastic components. The steel bolt comes in a corrosion-resistant, zinc-plated finish. This bi-fold door pivot features a bottom mount design with a hex head bolt for quick vertical adjustment, and it fits on 1-inch to 1-3/8 in. thick bi-fold doors, whose weight does not exceed up to 30lbs. each. Installation of these pivots requires only a 3/8 in. diameter hole beneath the vertical stile of the bi-fold door.

David. US. Sat May 10 2025

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

These storm door hinge pin kits include 6 sets of white nylon pins and bushings. They feature an overall height of 1-7/16 in. and 5/16 in. outside diameters. These nylon pins and bushings fit into the ends of storm door hinges to create pivot points, and they are used by Croft storm doors.

The Defender Security U 9591 Stainless Steel Lock and Door Reinforcer assists in preventing forced entry by reinforcing the weak spot of your door. It can be used to reinforce and repair metal, fiberglass and wood doors. Constructed of stainless steel, the lock reinforcer plate comes in a natural stainless steel finish.  All the necessary mounting hardware is included for a quick and easy installation. The lock reinforcement plate is pre-punched for mounting. The reinforcer is designed for snug fit on a 1-3/8 inch thick doors that have mortise or drive-in latches. Measuring 4-5/16 inch wide by 4-1/2 inch tall, the reinforcement plate accommodates key-in knob locksets on doors that have 2-1/8 inch bore sizes, with a backset of 2-3/4 inch from the edge of the door. The door reinforcer is non-recessed to fit over your existing latch.

Brass, 5.4" H x 3.75" W x 0.5" D

This Security ASA Adjustable Door Strike by Prime-Line Products is constructed of steel and it comes in a chrome-plated finish. It is ideal for use on wood or metal door jambs. Constructed of solid steel, the strike plate features a polished brass finish and comes with combo screws for simple installation. Used on wood or metal jambs. For best results, follow the installation instructions included with each package. These strikes are easy to replace using only a few simple tools. For further dimensional information, please see the line drawing.

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole. These stainless steel screws are rust and corrosion resistant.

This bronze patio door handle is a surface with clamp latch style. Often found on older style patio doors, it is mounted on the door's inside frame and the clamp latch latches onto an extrusion (astragal) on the jamb. It has 1-13/16 in. handle height extruded aluminum inside handle. This clamp has a 3/16 in. profile but it is spring-loaded allowing 1/8 in. play in clamp profile height. The projection is 3/8 in.. The outside handle is a bronze low profile non-keyed handle. To key this unit order the Prime-Line part E 2071 lock cylinder.

I thought it no longer available anywhere. Only Wayfair has it. The item is exactly the same as the one replaced. I would have to order again as soon as the other old one is damaged. Shipping was fast and the item arrived undamaged with good packaging.. Anonymous. Sat May 03 2025

This heavy gauge steel constructed strike comes plated in brass. It replaces most deadbolt strikes for increased security, a result of securing 3 in. screws to wall stud. The plate measures 1-1/4 in. wide by 3-5/8 in. long and is used with most entry doors.

Nickel Plated

These Prime-Line Products deadbolt strikes are constructed of heavy gauge stamped steel and come in optional plated finishes. These heavy duty deadbolt strikes replace most others and they increase the security with the 3-inch screws included within each pack. Use of long fasteners allow the deadbolt strike plate to fasten deep into the wall stud beneath the thin 3/4 inch door jamb. The plate can be used with most entry door applications. These strike plates are easy to install and they are used by many.

This deadbolt strike by Prime-Line Products is constructed of heavy gauge steel and it comes in an antique brass-plated finish. This heavy duty deadbolt strike replaces most deadbolt strikes and increases security with the 3-inch screws included within each pack. Use of long fasteners allow the deadbolt strike plate to fasten deep into the wall stud beneath the thin 3/4 inch door jamb. The plate can be used with most entry door applications.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

This strike and keeper is constructed from zinc alloy with a chrome plated finish. Often found on restroom partition walls that are 1-1/4 inch thick. They are easy to install.

6.35" H x 3.75" W x 0.45" D, Brass

This security deadbolt strike is constructed of stamped stainless steel and it comes in a satin finish. It features a 3/4 in. x 1-1/16 in. bolt opening to accommodate large bolt dimensions. This security strike is designed to replace the smaller deadbolt strike plates with a thicker 1/16 in. plate and two additional fasteners for maximum security. Installation of this strike will strengthen a locked door with the inclusion of two, 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot-hole drilling may be required for a flush install.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

1.88" H x 4" W x 6" D

These throw latch keepers are constructed of cast stainless steel and they come in a satin finish. They are ADA compliant, providing easy access when emergency entry is required. The keepers feature a slotted top & bottom opening for use with in-swinging left and right handed restroom stall doors. Keepers like these are manufactured in various dimensions for use with different latches, as well as in alternate finishes. These throw latch keepers are used by many, and they are simple to install. This item includes T-27 Torx security fasteners for installation of keeper. These fasteners feature tamper-resistant 6-lobe security drives with center pins.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

Do you find yourself needing a quick and simple way to trim the excess screening off your freshly constructed screen frame? This Prime-Line Screen Trimming Tool will zip down your 5/16 inch screen frame perfectly trimming the extra screening to make the screen look perfectly aligned to the window frame for smooth, professional cuts. It has a flip blade that safely switches from cutting to closed mode. This screening tool is a must have for all people wanting to make their screening repair jobs looking profession. It is quick and easy to trim the excess screen material with this lightweight and portable tool designed to help simplify screen installation.

This is a Trimline cam lock made of high pressure, corrosive resistant diecast zinc. It features a baked-on-white enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. Mounting holes are 2-1/16 in. on center, with an 11/16 in. hole backset.

This is a sliding window roller. White plastic housing, with a flat edge plastic roller. Top rollers adjust up to provide anti-lift protection. Bottom rollers adjust up and down for alignment. Used on Hilite 200 series windows.

These T-27 Torx screws are used together with T-27 barrel nuts where tamper-proof installation hardware is preferred. The heads require a specific screwhead to install or remove the typical Torx head cannot be used.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

These 1/4 inch by 9/16 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 1/4 x 9/16 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable white molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

The slide latch features an "occupied" or in-use exterior indicator that changes from green to red when the latch is engaged, and it displays the green color, or unoccupied state, announcing its availability for use when the door is unlocked. Toilet partition knob sets and latches like these are used to replace broken and missing knob sets of concealed latches used in thick steel door panel systems, which are designed to provide privacy in restroom partition stalls. This latch is a 3-component piece lockset that features a simple snap-together assembly, without the need for any additional fasteners. This slide latch knob set is used by Metpar and many other restroom partition manufacturers, and it is easy to install.

Twin, 15", Cornflower

Transform your bedroom into a haven of sophistication with this luxurious 100% cotton bed skirt. Expertly tailored with split corners, these bed skirts add a touch of timeless elegance to your bedding ensemble. Crafted from the finest cotton, they provide a soft and inviting texture that complements any decor. Imagine the serene beauty of your bed, adorned with a pristine skirt that gently cascades to the floor, hiding unsightly box springs and creating a seamless, polished look. Our bed skirts are designed to fit perfectly, ensuring an effortless style that enhances the overall aesthetic of your space. Experience the perfect blend of functionality and charm. The tailored design with split corners ensures a flawless fit around your bedposts, while the breathable cotton fabric offers an airy, fresh feel that invites you to relax and unwind. Let our bed skirts be the finishing touch that elevates your bedroom to new heights of romance and comfort. Embrace the elegance, and indulge in the luxury you deserve.

great product and exactly what I needed for a 125 year old iron bedstead. Anonymous. Fri May 01 2026

Black

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

These ID key tags are constructed of polystyrene (plastic) tabs and metal clips. The identification tags are oval in shape, and they feature hole at top for hanging purposes. Allows for the east identification of your keys. Each package contains 20 key tags.

1.25" H x 4" W x 5" D

This strike and keeper is constructed from satin stamped stainless steel. Fits square edge posts Used on outswing applications for 3/4 inch posts.

These SP 9606 Handyman single loop closed extension springs are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Springs like these are used for a variety of household and professional applications, and they feature a generous deflection length of 2.92 inch. These springs are easy to install and are used by many. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.

Obscure, Brushed Nickel

Update your bathroom with the timeless simplicity of the Legend Series Framed Swing Shower Door. Easy to install and extremely adjustable, this door sits perfectly at the intersection of fashion and function. With a bold matte black frame that pops against any shower stall tile, the Framed Legend glass shower door will bring your vision to life.

This shower door is one of the few I could find that fits a space that is just under 24". When I got the door it had a part with a screw hole in the wrong place and the hardware package was missing a few screws, but when I requested replacement parts they showed up in two days. I am happy with the final result.. Eric. Thu Dec 14 2023

These T-27 Torx screws are used together with T-27 barrel nuts where tamper-proof installation hardware is preferred. The heads require a specific screwhead to install or remove the typical Torx head cannot be used.

Used to counter-weight the moving sash on single and double-hung windows. Fits window styles that tilt in for cleaning. Conveniently has the Prime-Line part FS 341 pre-installed.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

These SP 9622 Handyman single loop closed extension springs are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Springs like these are used for a variety of household and professional applications, and they feature a generous deflection length of 8.33 inch. These springs are easy to install and are used by many. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.

This 1-1/4 inch reversed F-tab tandem roller assembly is designed for Fleetwood and a variety of other sliding patio doors. It features two concave (or grooved) steel ball bearing rollers in an adjustable stamped steel housing for smooth, quiet operation. The housing measures 11/16 inch wide with a 13/16 inch flare, 1-1/8 inch tall, and 3-1/8 inches long. Rear adjustment allows precise alignment during installation, while the reversed F-tab mounting design ensures a secure fit. Perfect for DIY homeowners and contractors, this assembly restores reliable sliding door performance.