Primeline Mp1765

This sliding door roller is constructed from steel. It is a center grooved ball bearing roller with a built-in axle. It includes an axle pin for roller replacement into many types of existing housings.

3/8 in

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sat Feb 21 2026

These shower Door bottom seals by Prime-Line Products are constructed of vinyl and come clear in color. They feature water-deflecting flaps that extend 5/16 in. beyond the frameless glass shower door bottoms. These seals mount onto the bottoms of 3/8 in. thick frameless glass shower doors, and fit glass panels that measure up to 36 in. wide. These are slip-on-fit seals and no adhesive is necessary. These seals are used by many shower door manufacturers.

Does a great job keeping the water in the shower.. Gina. Mayfield Heights, OH. Fri Apr 18 2025

This patio sliding screen door grille is constructed of aluminum and comes in a white painted finish. The grille is designed to install on the exterior side of 48 in. Wide sliding screen doors to provide child safety, and protect the screen fabric from pet damage. This screen door grille measures 26 in. Tall, and with the fasteners and installation instructions provided it is simple to install. This maintenance-free grille is constructed of superior quality using close weave aluminum mesh supported by strong, extruded aluminum frame material in an attractive styling.

High quality screen door grill. Had to trim mounting tabs on one side to allow the screen to fit into the frame recess.. Edward. Meadow Vista, CA. Sun Jun 22 2025

Satin Nickel, 1.2" H x 2.55" W x 1.5" D

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Wed May 17 2023

These window grid retainer pins are constructed of plastic bodies with steel needle point pins and they come clear in color. They feature a 3/4 inch long plastic shafts and 1/4 inch long plastic retainer sleeves, ideal for mounting mullion grids over the glass area of wood windows. These window grid retainer pins are used for securing decorative mullions to stationary and operating wood windows of all types and sizes.

This is a casement operator track that is riveted or screwed onto the bottom of a steel casement window. It fits the older style casement operators Prime–Line parts H 3500 through H 3523, and H 3581 through H 3588. The guide disc on the tip of the operator glides through the track to open or close the window.

These are flush plastic clips used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw.

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

This is a foam screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.145 inch in diameter. It is a top quality, round, smooth polyethylene with a flexible foam core. This is also an excellent substitute for metal spline. Color is black. 500 ft. per roll.

This Prime-Line M 6184 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy to install. The door sweep for bottom of door features a 3/32 inch multi tee shaped insert shape at its top. The 1-7/16 inch height and 36 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

It worked well. I did need to trim it down.. Gordon Mi. Phoenix, AZ. Fri May 09 2025

This Prime-Line M 6023 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the gray bottom door sweep is easy to install. The door sweep for bottom of door features a 1/8 inch star shaped insert shape at its top. The 1-5/16 inch height and 37 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

These storm door hinge pin kits include 6 sets of white nylon pins and bushings. They feature an overall height of 1-7/16 in. and 5/16 in. outside diameters. These nylon pins and bushings fit into the ends of storm door hinges to create pivot points, and they are used by Croft storm doors.

These make-2-fit window grid retainer pins are constructed from clear, durable plastic. The clear plastic construction allows them to blend and hide better with the window's finished surface. Each retainer features a steel-constructed pin secured in the center of the plastic shafts and helps to hold the window mullion grids onto the window frames. Included in each package are the retainer pins, and the pin bushing cups to allow for quick and easy installations. Use these window grid retainer pins on crank-out or push-out casement, awning, and hopper-type windows, on single and double-hung vertical sliding windows, and on fixed and horizontal sliding windows.

This is a 72 inch roll of a black vinyl track cap used to repair worn or damaged patio or wardrobe door aluminum tracks. In addition to repairing the track it helps quiet doors as they slide and can also be used on horizontal sliding window tracks. It is easy to use and can be cut to size. When installing use a thin bead of silicone glue to keep firmly in place.

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed brass finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

4.4" H x 4.7" W x 1.05" D

Prime‑Line® clothesline hooks provide a simple, dependable solution for hanging and supporting clotheslines, ropes, and cords around the home or yard. Designed for easy installation into wood, walls, or posts, these hooks offer reliable holding strength for indoor and outdoor laundry setups, gardening projects, garage organization, and general utility use. Manufactured from quality materials for durability and corrosion resistance, Prime‑Line clothesline hooks are built to withstand daily use and varying weather conditions while keeping lines securely in place. Their open‑hook design allows for quick attachment and removal, making adjustments fast and convenient for DIY homeowners. Trusted by households across the U.S., Prime‑Line clothesline hooks make it easy to set up, maintain, or upgrade functional hanging solutions with confidence and ease.

This outswing keeper is used with slide latch, fits on a square edge 3/4 inch post, it is constructed of satin cast stainless steel, the strike keeper measures 2-1/2 inch x 1-7/16 inch x 1-7/8 inch. The mounting holes are at 1-1/2 inch.

These patio door lock pins are constructed of steel and come in a chrome plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on chain for easy storage when not in use, and a retaining ring to add strength at insertion point when lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in the closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

Jim. Wed May 06 2026

This Prime-Line M 6022 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the gray bottom door sweep is easy to install. The door sweep for bottom of door features a flat shape at its top. The 1-1/2 inch height and 36 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

These are bore reducer rings. Constructed of steel and comes brass-plated. They allow 1-1/2 inch and 1-3/8 inch lock cylinders to fit into a 2-1/8 inch diameter bore. Comes with everything you need for a quick and easy installation.

The Prime-Line N 6730 Adjustable Bottom Pivot Pin Assembly is designed for use on Benchmark bi-fold doors. It fits into steel framed bi-fold door panels. This folding door hardware kit rod is threaded on the two ends with a nut, washer, and Tinnerman clip attached for easy installation. The bi-fold door hardware repair kit has a steel rod construction with a nylon cap, making it strong, durable, and built to last. The rod of the door pivot repair kit is 1/4 inch in diameter and 5-1/2 inches long. The closet door replacement parts pivot cap is 3/8 inch in diameter. Please refer to the line art drawing for closet door parts dimensions and compare to your needs before purchasing.

Part was hard to find, but you guys had it and it worked perfect. Corey. Sherwood Park, AB. Mon Oct 07 2024

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

The Defender Security U 9591 Stainless Steel Lock and Door Reinforcer assists in preventing forced entry by reinforcing the weak spot of your door. It can be used to reinforce and repair metal, fiberglass and wood doors. Constructed of stainless steel, the lock reinforcer plate comes in a natural stainless steel finish.  All the necessary mounting hardware is included for a quick and easy installation. The lock reinforcement plate is pre-punched for mounting. The reinforcer is designed for snug fit on a 1-3/8 inch thick doors that have mortise or drive-in latches. Measuring 4-5/16 inch wide by 4-1/2 inch tall, the reinforcement plate accommodates key-in knob locksets on doors that have 2-1/8 inch bore sizes, with a backset of 2-3/4 inch from the edge of the door. The door reinforcer is non-recessed to fit over your existing latch.

These ID key tags are constructed of polystyrene (plastic) tabs and metal clips. The identification tags are oval in shape, and they feature hole at top for hanging purposes. Allows for the east identification of your keys. Each package contains 20 key tags.

This door strike is constructed of extruded aluminum and it comes in a clear anodized finish. It can be used with 1-inch thick restroom partition doors that swing-out. This flat strike features a tall black rubber bumper that measure 1/2 inch wide x 6-inch in height. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This is a tension spring, flat, 3-1/8 inch length, heat treated steel, mill. Holds window screens into sliding aluminum window screen channels. Tension springs constructed from heat treated spring steel. They feature a round top design and require two 3/16 inch holes drilled 3-3/16 inch apart.

This panel clip has a 1/16 in. tip that allows for secure attachment of storm windows or screen panels to storm door frame with a screw. Made of white nylon.

This is a sliding window roller. White plastic housing, with a flat edge plastic roller. Top rollers adjust up to provide anti-lift protection. Bottom rollers adjust up and down for alignment. Used on Hilite 200 series windows.

These are wire tension springs made of spring steel. Designed to retain window screens in aluminum window frames through tension.

0.44" H x 2" W x 17" D

These spiral balances are used for non-tilt windows, the red bushing spiral balance indicates that it will lift up to 25 pounds. Used to counter-weight the moving sash on single and double-hung windows. Fits window styles that tilt in for cleaning. This spiral balance does not include an end clip and must be ordered separately.

This deadbolt strike plate is constructed of stamped stainless steel and comes in a satin finish. It features an 1/8 in. thick, heavy gauge stainless steel base which allows for 3 in. screws to be anchored into the wall stud. This two-piece high security deadbolt strike replaces standard exterior residential deadbolt strikes adding increased security to entry doors. This item includes one two-piece strike plate per package with fasteners. Pilot holes for 3 in. screw installation, and additional, deeper chiseling may be required flush install.

This deadbolt strike by Prime-Line Products is constructed of heavy gauge steel and it comes in an antique brass-plated finish. This heavy duty deadbolt strike replaces most deadbolt strikes and increases security with the 3-inch screws included within each pack. Use of long fasteners allow the deadbolt strike plate to fasten deep into the wall stud beneath the thin 3/4 inch door jamb. The plate can be used with most entry door applications.

This plated steel pin is used to secure window screens on sliding aluminum windows. Constructed from steel, it comes in a chrome plated finish. The pin has a 1/8 inch diameter. Typically it is used with 1 inch screen frames to lock them into the frames. Each package contains 6 window screen lock pins. If you do not have hole pre-drilled a drill and a 1/8 inch drill bit will be required for installation. Be careful when drilling to not hit the glass of the window and cause damage.

1.88" H x 4" W x 6" D

These throw latch keepers are constructed of cast stainless steel and they come in a satin finish. They are ADA compliant, providing easy access when emergency entry is required. The keepers feature a slotted top & bottom opening for use with in-swinging left and right handed restroom stall doors. Keepers like these are manufactured in various dimensions for use with different latches, as well as in alternate finishes. These throw latch keepers are used by many, and they are simple to install. This item includes T-27 Torx security fasteners for installation of keeper. These fasteners feature tamper-resistant 6-lobe security drives with center pins.

Satin Nickel, 11" H x 4" W x 1.25" D

This is a maximum security combo strike that fits 5-1/2 in. and 6 in. hole spacing's on center dead latch and deadbolt. Uses six 3 in. screws that install on the vertical side of the strike closest to the stop molding. These 3 in. screws allow for a strong hold as they drive into the jack stud to help prevent kick-ins. Three #8 x 3/4 in. screws install on the side of the strike closest to the door.

Nickel Plated

These Prime-Line Products deadbolt strikes are constructed of heavy gauge stamped steel and come in optional plated finishes. These heavy duty deadbolt strikes replace most others and they increase the security with the 3-inch screws included within each pack. Use of long fasteners allow the deadbolt strike plate to fasten deep into the wall stud beneath the thin 3/4 inch door jamb. The plate can be used with most entry door applications. These strike plates are easy to install and they are used by many.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

6.35" H x 3.75" W x 0.45" D, Brass

This security deadbolt strike is constructed of stamped stainless steel and it comes in a satin finish. It features a 3/4 in. x 1-1/16 in. bolt opening to accommodate large bolt dimensions. This security strike is designed to replace the smaller deadbolt strike plates with a thicker 1/16 in. plate and two additional fasteners for maximum security. Installation of this strike will strengthen a locked door with the inclusion of two, 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot-hole drilling may be required for a flush install.

This strike and keeper is constructed from zinc alloy with a chrome plated finish. Often found on restroom partition walls that are 1-1/4 inch thick. They are easy to install.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.