Primeline Mp10867

White

These 2 in. square wall protectors are constructed of rigid vinyl and they come ivory in color with a textured surface. They feature a self-adhesive backing which allows them to be easily mounted in place. These wall protectors are designed to protect interior walls from impact damage by shielding between the point of contact of the walls and door knobs. These wall protectors can sometimes be used also to conceal small holes in walls caused by door knobs.

The little squares are great for protecting my wall from getting scratched by the dining chairs. Very easy to peal and stick.. Debra. Tucson, AZ. Fri Jun 19 2026

3/8 in

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sat Feb 21 2026

Gray, 30.13" H x 3.75" W x 1" D

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Fri Feb 20 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Wed May 28 2025

These shower Door bottom seals by Prime-Line Products are constructed of vinyl and come clear in color. They feature water-deflecting flaps that extend 5/16 in. beyond the frameless glass shower door bottoms. These seals mount onto the bottoms of 3/8 in. thick frameless glass shower doors, and fit glass panels that measure up to 36 in. wide. These are slip-on-fit seals and no adhesive is necessary. These seals are used by many shower door manufacturers.

The product seemed good. Unfortunately it didn’t fit our shower because the sweep was too big compared to the space between the bottom of door and base.. Lori. London Canada. Mon Jun 15 2026

This patio sliding screen door grille is constructed of aluminum and comes in a white painted finish. The grille is designed to install on the exterior side of 48 in. Wide sliding screen doors to provide child safety, and protect the screen fabric from pet damage. This screen door grille measures 26 in. Tall, and with the fasteners and installation instructions provided it is simple to install. This maintenance-free grille is constructed of superior quality using close weave aluminum mesh supported by strong, extruded aluminum frame material in an attractive styling.

High quality screen door grill. Had to trim mounting tabs on one side to allow the screen to fit into the frame recess.. Edward. Meadow Vista, CA. Sun Jun 22 2025

8.35" H x 3.75" W x 1.2" D, Copper

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

Satin Nickel, 1.2" H x 2.55" W x 1.5" D

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Wed May 17 2023

Nickel

Enhance door security with this premium hotel door blocker, a trusted solution in the hospitality industry and beyond. Designed for in-swinging doors, this secondary lock prevents forced entry from the outside while allowing the door to open slightly for safe visitor identification. Commonly installed in hotels, motels, and commercial properties, it’s also ideal for homes, rentals, and offices seeking added security. Unlike traditional flip latches or chain locks, this blocker minimizes damage caused by slamming doors, preserving both door frames and hardware. Its durable satin chrome-plated finish delivers a professional, modern look that blends seamlessly with most décor styles. Easy to install with the included mounting hardware, this door blocker provides an effective upgrade to standard door locks without requiring specialized tools. Durable, stylish, and functional, it offers peace of mind for property owners and occupants alike.

Was my mistake. This item is not good for my door, but I give this item to my friend they can use it for there door.. Zoila. Jackson Heights, NY. Mon Mar 31 2025

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

This is a casement operator track that is riveted or screwed onto the bottom of a steel casement window. It fits the older style casement operators Prime–Line parts H 3500 through H 3523, and H 3581 through H 3588. The guide disc on the tip of the operator glides through the track to open or close the window.

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Mon Jun 23 2025

4.4" H x 4.7" W x 1.05" D

Prime‑Line® clothesline hooks provide a simple, dependable solution for hanging and supporting clotheslines, ropes, and cords around the home or yard. Designed for easy installation into wood, walls, or posts, these hooks offer reliable holding strength for indoor and outdoor laundry setups, gardening projects, garage organization, and general utility use. Manufactured from quality materials for durability and corrosion resistance, Prime‑Line clothesline hooks are built to withstand daily use and varying weather conditions while keeping lines securely in place. Their open‑hook design allows for quick attachment and removal, making adjustments fast and convenient for DIY homeowners. Trusted by households across the U.S., Prime‑Line clothesline hooks make it easy to set up, maintain, or upgrade functional hanging solutions with confidence and ease.

This lock is constructed from diecast and comes in a painted aluminum color. The 1-1/2 in. throw bolt may be manually or key locked. Helps to prevent forced entry and may be locked in ventilating position. Can be used on patio doors, sheds, and utility doors to help prevent a forced entry. May also be mounted in a ventilating position and keep the door secure.

Works really well. We have used them all over the house over the years. One caveat: it may happen that the spring gets misaligned, which makes it hard to close the lock without manually adjusting the spring. I believe this is a rare occurrence of a manufacturing fault, not a general design flaw. Over all, this is an excellent lock for sliding doors.. Anonymous. Thu May 07 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

White

These sliding patio door locks are keyed for extra security and help prevent unwanted opening of patio sliding doors from either side. The durable housings of these locks are constructed of diecast metal and they feature solid steel locking bolts that extend, retract, and lock into place. The security benefits of these socks help to prevent prying and lifting of the active panels, significantly reducing the chances of entry from the outside. Each set includes two sets of keys, installation hardware, and instructions, and they can be installed with a few simple tools.

Exactly what I needed to lock a closet sliding doors.. Lenir. New York, NY. Wed Feb 15 2023

Prime-Line D 1579-C Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 48 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Fit perfectly!. Gordon. Sat Apr 11 2026

8.4" H x 3.75" W x 1.05" D, Champagne

This casement operator cover is constructed from high impact plastic and it comes white in color. It fits Pella casement operators and similar styled casement windows. This is a left-hand operator replacement cover for Pella casement windows, as determined (handing) by facing the window from the inside; looking out. For right-hand operators of the same style, see Prime-Line part H 4060.

Has your sliding screen handle broken, is it worn out, cracked, damaged or just worn out? This lever is used on a variety of patio door manufacturer's sliding screen doors. It is a diecast metal lever with a nickel finish that features a 2-1/2 inch length and a 1-inch diameter mounting area. When installed properly it engages the internal hook or internal latch body. Order yours today and make your sliding screen door secure again.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Beautiful. Would be better if all the screws were long. You get 2-1” screws and 1- 3”screw. It’s also a little pricey compared to the black and silver. It would be nice if they’d make a satin gold instead of the shiner old fashion gold.. Angela. Fort Worth, TX. Wed Jan 11 2023

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

These storm door panel clips by make-2-fit are constructed of plastic and come clear in color. They feature a flush-fitting design and are used to retain glass and screen to storm door panels. The solid, low visibility, clear plastic construction of these clips help them to blend easier with finished surfaces. They come complete with fasteners for quick and easy installations. The clips have a 1/32 in. A tip that allows for secure attachment of storm windows and screen panels to storm door frame with a screw.

This Prime-Line M 6226 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy to install. The door sweep for bottom of door features a 3flat shape at its top. The 1-1/2 inch height and 36 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

Black

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

These are bore reducer rings. Constructed of steel and comes brass-plated. They allow 1-1/2 inch and 1-3/8 inch lock cylinders to fit into a 2-1/8 inch diameter bore. Comes with everything you need for a quick and easy installation.

It is a surface-mounted Bobrick-style latch that is designed for use on swing-in partition doors, and it comes complete with a matching keeper and stainless steel fasteners. This latch mounts over a durable, black plastic base with its mounting holes spaced apart. This restroom stall slide latch also features a tension adjustment clip that is embedded within the black plastic mounting plate, concealed beneath the stainless steel surface of the lock. The tension clip can be adjusted to create or reduce resistance between the plastic insert and the metal housing. Setting the amount of force needed to slide the latch from left to right is as easy as bending the clip away from the plastic base to increase the tension, and bending it towards the plastic base to decrease tension. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

These storm door hinge pin kits include 6 sets of white nylon pins and bushings. They feature an overall height of 1-7/16 in. and 5/16 in. outside diameters. These nylon pins and bushings fit into the ends of storm door hinges to create pivot points, and they are used by Croft storm doors.

These ID key tags are constructed of polystyrene (plastic) tabs and metal clips. The identification tags are oval in shape, and they feature hole at top for hanging purposes. Allows for the east identification of your keys. Each package contains 20 key tags.

These shower door bottom guides are constructed of plastic and come gray in color. Installation is easy with only two fasteners to replace, per the guide. The channels feature 1/2 in. wide openings that will allow for use with up to 7/16 in. thick glass panels. The use of these bottom-mount guides will help keep sliding glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

While not a perfect fit, it did the job. William. US. Mon May 12 2025

White

Works well on the bathroom's pocket door.. Anonymous. Tue Apr 14 2026

This Prime-Line M 6184 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy to install. The door sweep for the bottom of the door features a 3/32-inch round insert shape at its top. The 1-inch height and 37-inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare them with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

These patio door lock pins are constructed of steel and come in a chrome plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on chain for easy storage when not in use, and a retaining ring to add strength at insertion point when lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in the closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

Jim. Wed May 06 2026

This is an extruded aluminum sliding doorkeeper. It is surface mounted for hook-style latches. The dimensions are 2-1/2 in. in length, with a 1-1/2 in. width. It is used by Viking doors.

These Truth Hardware Sash Locks by Prime-Line Products are constructed of high pressure, corrosive resistant, diecast zinc and they come in a bronze baked-enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The mounting holes are spaced apart evenly, and they feature backset holes. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. These locks are easy to install and used by many.

This 7/16 inch deep reach storm clips secure glass or screen panels to a storm door. The clips feature a self-locking design for attaching to the door frame.

Bronze

This is a left-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has an attractive finish with mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

This is a flat-edged roller and axle. Flat zinc plated steel roller. Constructed with a plastic axle pin. Used on Premier and Keller windows.

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed chrome finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and a flat keeper used for outswinging doors, providing everything needed for a secure and reliable door locking solution.

Used to counter-weight the moving sash on single and double-hung windows. Fits window styles that tilt in for cleaning. Conveniently has the Prime-Line part FS 341 pre-installed.

These T-27 Torx screws are used together with T-27 barrel nuts where tamper-proof installation hardware is preferred. The heads require a specific screwhead to install or remove the typical Torx head cannot be used.

This Prime-Line M 6022 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the gray bottom door sweep is easy to install. The door sweep for bottom of door features a flat shape at its top. The 1-1/2 inch height and 36 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

This Chain Door Lock is constructed of steel components and comes in a beautiful, corrosion-resistant, classic bronze finish. Typically these are used on inswing doors that you may want extra security on. With this door guard properly installed you can safely and securely either vent the room or open your door slightly. All the necessary mounting hardware is included for a quick and easy installation. Additionally this can be used as a child safety lock if mounted high enough for your child to not be able to reach.

These shim plates are constructed of plastic and come gray in color. They feature a dual slotted mounting hole pattern that is designed to match the mounting holes of the spring-loaded strike plates used for latching hinged screen doors. These shim plates are used for adjusting the screen door strike plates closer to the latching hardware to provide a firm contact with the latch. These shims are 1/8 inch thick, 7/8 inch wide and 2-5/8 inch tall, and they come in quantities of 100 per pack. Shims like these are used by many to compensate for large gaps between the latching hardware of closed (hinged) screen doors, and they are easy to install.

5.4" H x 3.7" W x 0.6" D

This is a steel binder post and screw set used for attaching handles to sliding patio door rails and sliding screen door rails. They fit 1-3/4 inch to 2 inch wide rails and have a low profile design for a less intrusive look. Each package contains 2 screws and 2 posts. The screw is 2 inch in length and the post is 1/2 inch to install these, 2 Phillips head screwdrivers will be required.