Primeline Mp10420

Backplates like these are used on both cabinet doors and drawer faces to prevent the wearing of finished wood, and the unsightly accumulation of dirt and grime.

This two piece strike and keeper is constructed from zinc alloy with a chrome plated finish. Mounting holes are 1-1/2 in. on center. Fits on any post size and is for outswing applications with a slide latch.

1.2" H x 2.55" W x 1.5" D, Satin Nickel

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Wed May 17 2023

These shower door bottom guides are constructed of plastic and come gray in color. Installation is easy with only two fasteners to replace, per the guide. The channels feature 1/2 in. wide openings that will allow for use with up to 7/16 in. thick glass panels. The use of these bottom-mount guides will help keep sliding glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

While not a perfect fit, it did the job. William. US. Mon May 12 2025

This shower curtain hanger repair tab is constructed from clear plastic. It features an adhesive backing for quick installation. These tabs are used to repair tears in your plastic shower and liner curtains. Best results are achieved when repair tabs are applied on both sides of each tear.

The discs worked well to help prolong the life of my shower curtain.. Anonymous. Sun Jan 04 2026

These unslotted security barrel nuts are constructed of steel and come in a chrome plated finish. These fasteners are manufactured with #10-24 threads and have a reach of 1/2 inch, with a 1/4 inch outside diameter, and a 1/2 inch head diameter. Unslotted barrel fasteners like these are commonly used with T-27 Torx and one-way tamper-proof shoulder screws in commercial restroom applications. Barrel nuts like these are also known as bolts and Chicago bolts in the fastener industry, and they are designed for use where through bolting is desired with a head on both sides, as commonly used for the installation of restroom stall hardware.

This Prime-Line M 6022 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the gray bottom door sweep is easy to install. The door sweep for bottom of door features a flat shape at its top. The 1-1/2 inch height and 36 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

It is a surface-mounted Bobrick-style latch that is designed for use on swing-in partition doors, and it comes complete with a matching keeper and stainless steel fasteners. This latch mounts over a durable, black plastic base with its mounting holes spaced apart. This restroom stall slide latch also features a tension adjustment clip that is embedded within the black plastic mounting plate, concealed beneath the stainless steel surface of the lock. The tension clip can be adjusted to create or reduce resistance between the plastic insert and the metal housing. Setting the amount of force needed to slide the latch from left to right is as easy as bending the clip away from the plastic base to increase the tension, and bending it towards the plastic base to decrease tension. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

This lift and turn drain assembly is constructed of zinc diecast and comes in a chrome plated finish. It features an O-ring seal and fine thread at 16 thread per in. TPI (threads per Inch).

This replacement shower cartridge is constructed of brass and it fits Mixet shower valves that use 4-1/2 in. long cartridges. This replacement cartridge can be used in both hot and cold shower valves.

This Prime-Line M 6226 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy to install. The door sweep for bottom of door features a 3flat shape at its top. The 1-1/2 inch height and 36 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

These universal hot and cold index buttons are constructed of clear acrylic and come with a gold colored-plating. These index buttons feature large 1-5/16 in. diameters. Use these index buttons with two-handle washerless faucets. Easy to install.

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole. These stainless steel screws are rust and corrosion resistant.

This is a foam screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.145 inch in diameter. It is a top quality, round, smooth polyethylene with a flexible foam core. This is also an excellent substitute for metal spline. Color is black. 500 ft. per roll.

This strike and keeper is constructed from Chrome Plated Zamak. Keeper is 1-1/4 inches X 2-3/8 inch X 2-9/16. Fits on 1-1/4 inch round edge posts and is used on inswing applications for Throw Latch (Emergency Entrance) and is ADA Compliant.

Matte Black

The Speakman Neo S-2540 Shower Arm and Flange feature a modern design perfect for today's contemporary bathrooms. The arm is constructed entirely of brass and coated with a corrosion-resistant Polished Chrome finish. Designed to flawlessly coordinate with any fixture in the Neo Collection.

Has a good weight and should work out well when installed. Darin. South Boston, MA. Thu Dec 04 2025

This replacement shower stem is constructed of brass and it fits Gerber shower valves that use 5-9/16 in. long stems. This replacement stem can be used in both hot and cold shower valves.

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

The slide latch features an "occupied" or in-use exterior indicator that changes from green to red when the latch is engaged, and it displays the green color, or unoccupied state, announcing its availability for use when the door is unlocked. Toilet partition knob sets and latches like these are used to replace broken and missing knob sets of concealed latches used in thick steel door panel systems, which are designed to provide privacy in restroom partition stalls. This latch is a 3-component piece lockset that features a simple snap-together assembly, without the need for any additional fasteners. This slide latch knob set is used by Metpar and many other restroom partition manufacturers, and it is easy to install.

These door pulls are constructed of Zamak (zinc alloy) and come in a chrome plated finish. They feature a 2-3/8 in. grip area and a soft arch design. Partition door pulls like these are used by many and are easy to install. These pulls are used on restroom stall door panels for new installs, and for the repair or replacement of damaged or missing hardware.

8.35" H x 3.75" W x 1.2" D, Copper

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

This bottom hinge kit includes components constructed of various materials, and the main hinge bracket comes in a chrome-plated finish. The post-mounted gravity pivot hinge bracket fits on 1 in. thick posts and panels that have square cut edges. This bracket also features a 1-9/32 in. key dimension, and its pintle has an outside diameter of 1/2 in. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with centre pins. This hardware is designed for use with partition hardware by General Applications.

This Prime-Line M 6184 Shower Door Bottom Sweep helps prevent water from leaking onto floors. The shower door bottom sweep is a replacement sweep for use on hinged swinging shower and tub enclosure doors. Constructed of vinyl, the clear and transparent bottom door sweep is easy to install. The door sweep for bottom of door features a 3/32 inch multi tee shaped insert shape at its top. The 1-7/16 inch height and 36 inch length can be trimmed as necessary for best fit. Please refer to the line art drawing for dimensions and compare with your needs before purchasing. INSTALLATION TIP: Soak in hot water to help relax the material so it can be installed easier and the material will reshape to its original form before being compressed in the packaging.

It worked well. I did need to trim it down.. Gordon Mi. Phoenix, AZ. Fri May 09 2025

These door pulls are constructed of Zamak (zinc alloy) and come in a chrome plated finish. They feature a contoured, sleek design and a large 3 in. grip area. Partition door pulls like these are used by many and are easy to install. These pulls are used on restroom stall door panels for new installs, and for the repair or replacement of damaged or missing hardware.

This bottom hinge kit includes components constructed of various materials, and the main hinge bracket comes in a stainless steel satin finish. The post-mounted gravity pivot hinge bracket fits on 1 in. thick posts and panels that have square cut edges. This bracket also features a 1-9/32 in. key dimension, and its pintle has an outside diameter of 1/2 in.. This hardware is designed for use with partition hardware by General Applications.

This bottom hinge kit includes components constructed of various materials, and the main hinge bracket comes in a chrome-plated finish. The post-mounted gravity pivot hinge bracket fits on 1-1/4 in. thick posts and panels that have round cut edges. This bracket features a 1-5/32 in. key dimension, and the T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with centre pins. The pintle has an outside diameter of 5/8 in.. This hardware is designed for use with partition hardware by Flush Metal.

These one-way barrel nuts are constructed of steel and come in a chrome plated finish. They feature a tamper-proof head which prevents them from being loosened or removed once installed. These fasteners are manufactured with #10-24 thread and have a reach of 5/8 in., with a 1/4 in. shaft outside diameter, and a 7/16 in. head diameter. One-way barrel fasteners like these are commonly used with one-way shoulder screws in commercial restroom applications. Installation of these types of security fasteners requires only the use of a (flat head) slotted screwdriver, while the removal of these fasteners requires a one-way screw remover tool.

The TOTO® ECOPOWER® 1.0 GPM 10 Second On-Demand Water Supply Controller Valve for Touchless Bathroom Spouts is designed for use with compatible TOTO ECOPOWER spouts. The ECOPOWER faucet is ideal for high-traffic commercial spaces and provides an elegant water conservation solution. Powered by the force of running water, ECOPOWER hydro-turbines create an electrical current that is stored in rechargeable cells to power the Smart Sensor System of the faucet. The ECOPOWER faucet is highly efficient, replenishing power stores in as little as five uses daily. No external power source or battery replacement is necessary. The ECOPOWER 1.0 GPM 1 second on-demand controller uses only 0.18 gallons per cycle and is CEC and CALGreen compliant. The on-demand system means that water flows only when needed and cannot be accidentally left running. When hands are present, the water will flow, and when hands are removed, the water will stop. Included: controller and mounting hardware. Purchased separately: compatible spout, water supply line for G1/2 connection, and optional mixing valve for water that is not pre-mixed.

Adds just the right amount of power for the automated faucets. Cindy. Fort Pierce, FL. Tue Feb 03 2026

Matte Black

Elevate Your Shower Experience with Confidence – Our premium metal trim kit delivers a durable, DIY-friendly solution designed for long-lasting performance and effortless installation. Specifically engineered for compatibility with Moen valves (models 2510, 2520, 2570, or 2590; valve and cartridge must be purchased separately). Crafted with robust metal construction for superior durability and reliability. The one-handed lever enables intuitive control of water temperature and flow for a comfortable, customizable shower experience. With clear, beginner-oriented instructions, even first-time installers can easily refresh their shower space without professional assistance.

Great looking and very well made. Jim. Hobe Sound, FL. Thu Jan 01 2026

These SP 9734 Handyman Compression Springs by Prime-Line Products are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Compression springs like these are used for a variety of household and professional applications. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.

This P-Trap is constructed of polypropylene (PVC) and comes white in color. Typically it is for use with drain pipe fittings. It can be used for kitchen, utility, bathroom and other sinks. There is a small amount of adjustability depending on your sink and drainage situation. An adjustable wrench is required for installation. Use caution not to over-tighten the plastic nuts and cause damage. Often these nuts only need to be hand tightened.

These pintle assemblies are constructed of steel and plastic components, and the plastic is white in color. This pintle is affixed to a steel bolt, and includes an external tooth lock washer, an internal tooth lock washer and a nylon insert locknut (also referred to as "nylock"). pintle assemblies like these are used together with other pivot hinge accessory hardware for the installation and repair of restroom partition stall doors. The fasteners on this pintle feature 5/16-18 thread.

Nickel Plated

These Prime-Line Products deadbolt strikes are constructed of heavy gauge stamped steel and come in optional plated finishes. These heavy duty deadbolt strikes replace most others and they increase the security with the 3-inch screws included within each pack. Use of long fasteners allow the deadbolt strike plate to fasten deep into the wall stud beneath the thin 3/4 inch door jamb. The plate can be used with most entry door applications. These strike plates are easy to install and they are used by many.

Unplated

This restroom partition replacement hardware is designed to repair 1-inch thick panels. It is constructed of cast metal and finished in a bright chrome plated finish.

6.35" H x 3.75" W x 0.45" D, Brass

This security deadbolt strike is constructed of stamped stainless steel and it comes in a satin finish. It features a 3/4 in. x 1-1/16 in. bolt opening to accommodate large bolt dimensions. This security strike is designed to replace the smaller deadbolt strike plates with a thicker 1/16 in. plate and two additional fasteners for maximum security. Installation of this strike will strengthen a locked door with the inclusion of two, 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot-hole drilling may be required for a flush install.

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

These pilaster shoe kits are constructed of an 18 ga. steel anchor bracket and a 22 ga., satin finished stainless steel pilaster shoe. They feature a 3 in. tall reach and oval ends. Each bracket is slotted at the horizontal base, on each end for ease of install. The anchor brackets are used to install the pilaster shoes in commercial restroom partitions, and all installation fasteners are included with each kit.

These Zip-It wall anchors are constructed of nylon, and made of a heavy-duty design. They are fabricated to provide a secure anchor point in hollow walls. Installation of these anchors require no drilling. The number 8 size screws included.

These SP 9700 Handyman Compression Springs by Prime-Line Products are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Compression springs like these are used for a variety of household and professional applications. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.

These SP 9702 Handyman Compression Springs by Prime-Line Products are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Compression springs like these are used for a variety of household and professional applications. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.

Surface-mounted hinge set, RH-in/LH-out, with fasteners, stamped stainless steel. Use with accurate, all American, amp, American sanitary, fiat, flush metal, global, general, met par, mills manufacturers.

Spot Resist Brushed Nickel

The Moen Magnetix Remote Dock provides additional docking where you need it most. Two mounting options are included for a quick install – choose from the provided permanent waterproof adhesive, or screws and wall bracket. The dock works with any Magnetix showerhead as an alternate location to secure your hand shower, providing easy access at any height. It’s ideal for bathing children and pets or seated bathing.

This was very easy to install. You can use the adhesive option or the anchors and screws that are also provided.. Dennis. Henderson, NV. Sat May 16 2026

Keep your shower door secure with this Prime-Line shower door catch. This is a steel shower door catch with a spring-loaded nylon tip. Designed to be attached to the door frame of swinging shower door and hold the door closed. Nylon latch allows for a soft but durable hold. The housing is designed to be adjustable with the elongated mounting slots which are 1 inch on center.

This bottom hinge kit includes components constructed of various materials, and the main hinge bracket comes in a chrome plated finish. The post-mounted gravity pivot hinge bracket fits on 1-1/4 in. thick posts and panels that have round cut edges. This bracket features a 1-5/32 in. key dimension, and it includes 2 pintles that have outside diameters of 1/2 in. and 5/8 in.. This hardware is designed for use with partition hardware by All-American.

Obscure, Brushed Nickel

Update your bathroom with the timeless simplicity of the Legend Series Framed Swing Shower Door. Easy to install and extremely adjustable, this door sits perfectly at the intersection of fashion and function. With a bold matte black frame that pops against any shower stall tile, the Framed Legend glass shower door will bring your vision to life.

This shower door is one of the few I could find that fits a space that is just under 24". When I got the door it had a part with a screw hole in the wrong place and the hardware package was missing a few screws, but when I requested replacement parts they showed up in two days. I am happy with the final result.. Eric. Thu Dec 14 2023

This deadbolt strike by Prime-Line Products is constructed of heavy gauge steel and it comes in an antique brass-plated finish. This heavy duty deadbolt strike replaces most deadbolt strikes and increases security with the 3-inch screws included within each pack. Use of long fasteners allow the deadbolt strike plate to fasten deep into the wall stud beneath the thin 3/4 inch door jamb. The plate can be used with most entry door applications.

These SP 9715 Handyman Double Loop Closed Extension Springs are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Springs like these are used on a variety of household applications, and they feature a generous deflection length of 6.18 inch. These springs are easy to install and are used by many. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.