Primeline Fj 2130

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

Brass

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Mon Jul 08 2024

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Viren. Tustin, CA. Sat May 11 2024

These universal hot and cold index buttons are constructed of clear acrylic and come with a gold colored-plating. These index buttons feature large 1-5/16 in. diameters. Use these index buttons with two-handle washerless faucets. Easy to install.

White

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

These one-way barrel nuts are constructed of steel and come in a chrome plated finish. They feature a tamper-proof head which prevents them from being loosened or removed once installed. These fasteners are manufactured with #10-24 thread and have a reach of 5/8 in., with a 1/4 in. shaft outside diameter, and a 7/16 in. head diameter. One-way barrel fasteners like these are commonly used with one-way shoulder screws in commercial restroom applications. Installation of these types of security fasteners requires only the use of a (flat head) slotted screwdriver, while the removal of these fasteners requires a one-way screw remover tool.

1" H x 4" W x 5" D, Satin Nickel

This decorative door knocker and viewer is constructed of diecast materials and comes in a satin nickel finish. Its vintage design extends a total of 4 inch tall and features a 160 degree angle of view. This door knocker and viewer can be installed on doors from 1-3/8 inch thick to 1-3/4 inch thick, with a required 1/2 inch inside diameter hole for installation of viewer. The integrated door viewer within this door knocker is designed to help keep you safe when answering your door and is ideal for day or night viewing with adequate exterior lighting. This door knocker and viewer is easy to install and it is used by many. See Prime-Line part S 4793 for a door viewer inside cover. Inside viewer covers (not included with this item) prevent reversed visibility through door viewers from the exterior of the home, increasing the security and privacy of your home.

Great item, came as it is described. Dawn. Malverne, NY. Thu Apr 28 2022

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole. These stainless steel screws are rust and corrosion resistant.

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

Brass

These door viewers are constructed of solid brass housings and come in alternate finishes. The lenses of these viewers vary in type, some are made of U.L. Listed glass and others of plastic (non-U.L. Listed). Each features a 160 degree angle of view, and they can be installed on door thicknesses ranging from 1-3/8 in. thick to 2 in. thick, with a required 1/2 in. diameter hole. These door viewers are designed to help keep you safe when answering your door and they are ideal for day or night viewing when adequate exterior lighting is provided. Viewers like these are easy to install and they are used by many. As an available option, inside viewer covers (sold separately - not included with this item) prevent reversed visibility through door viewers from the exterior of the home, increasing the security and privacy of your home.

Stainless Steel, 6.05" H x 3.85" W x 0.55" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

Zinc Plated, 3.6" H x 3.8" W x 0.85" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

Designed for use with a concealed latching mechanism, it assembles easily with a push nut fastener. This lever set has a 1-5/8 in. outside diameter, and it features an overall reach of 2-13/16 inches with a flat, slotted emergency-access knob on the exterior. Lever sets like these are used to replace broken and missing lever and knob sets of concealed latches. This Lever set is used by Sanymetal for use with steel doors, and it is easy to install. Note: Assembly will be permanent upon the first unification of both parts. Attempting to separate the inside and outside knobs once joined may damage the internal push nut component.

Brown

These door viewer privacy covers are constructed of plastic and are available in two colors. They feature a large 1-1/2 in. outside diameter cover for privacy and easy gripping. This fixed security device provides privacy against the use of reverse peephole spy tool lenses, like cameras, scopes, and phone apps. Fixed door viewer privacy covers like these can be used on apartment doors, office doors, service doors, homes, dorms, etcetera. This privacy cover mounts with a base plate and two fasteners and features a self-closing cover that must be pushed upwards for viewing thru the door viewer.

Excellent choice. Maribel. Jersey City, NJ. Fri Jan 19 2024

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Fri Feb 13 2026

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

This Prime-Line J 4636 Door Push is designed for use on any swinging door to help prevent scuff marks or other damage. Installation of this swinging door protector is quick and easy with the included hardware and pre-drilled mounting holes. Constructed from stainless steel with a removable PVC protective coating, this push plate has a stainless steel finish. This door protection plate measures 8 inch by 16 inch and is designed for use on 18 inch doors. For further dimensional information, please see the line drawing and compare with your needs before purchasing.

This is a foam screen retainer spline designed to be use for securing various types of screen fabric into a window screen or screen door frame. 0.145 inch in diameter. It is a top quality, round, smooth polyethylene with a flexible foam core. This is also an excellent substitute for metal spline. Color is black. 500 ft. per roll.

These one-way screws and barrel nuts are constructed of steel and come in a chrome-plated finish. They feature one-way, tamper-proof drive heads that prevent them from being loosened and removed once installed. The security drive heads of these fasteners allow for easy installation with a flat screwdriver, but require the use of a one-way screw remover tool. See item number 650-7901 for screw sizes 6-8, model number 650-7902 for sizes 8-10, and model number 650-7903 for sizes 12-14, or model number 650-7904, which includes one of each one-way screw remover hand tools.

These shower door guides are constructed from white molded plastic. They are used to keep your shower doors properly aligned. They come complete with fasteners for a quick and easy installation.

This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in a white finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.

These shower door bottom guides are constructed of plastic and come gray in color. Installation is easy with only two fasteners to replace, per the guide. The channels feature 1/2 in. wide openings that will allow for use with up to 7/16 in. thick glass panels. The use of these bottom-mount guides will help keep sliding glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

While not a perfect fit, it did the job. William. US. Mon May 12 2025

This door strike reinforcing kit by prime-line products is constructed of solid brass and comes in a beautiful, corrosion-resistant, classic bronze finish. This two-piece security strike kit allows for hole center flexibility in securing combination deadbolt and entry lock installation, as the two can be separate from one another as determined by existing door locking hardware. The deadbolt and entry lock strikes included in this kit replace most strikes and improves security with 3 in. Long screws are attached to the wall stud.

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

This maximum security combination strike is constructed of stamped steel and it comes plated in a satin nickel finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush install.

Matched perfectly with our new door entry combo. Secure for sure. What a difference.. Anonymous. Sat Mar 07 2026

This strike and keeper is constructed from zinc alloy with a chrome plated finish. Often found on restroom partition walls that are 1-1/4 inch thick. They are easy to install.

The FOTILE Perimeter Vent Series introduces the new EMG9050 range hood that stands out as a premier choice for larger, modern kitchens. This wall-mounted model showcases a powerful design, perfectly complementing spacious cooking areas with its black tempered glass and stainless steel. The EMG9050 excels in performance with its strong 700CFM airflow, propelled by an advanced DC motor, ensuring effective ventilation and smoke extraction. Its innovative features, like the delayed shutoff function, provide added convenience, allowing you to easily maintain a fresh and clean kitchen environment. Plus, its innovative Sync Function, with cooktops and an intelligent self-cleaning system, further enhances its functionality, making it an indispensable tool for any kitchen.

Hood range came quickly and in great condition. I am already using it and am pleased by how effectively it absorbs the odors from frying.. Anonymous. Tue Oct 14 2025

This outswing keeper is used with slide latch, fits on a square edge 3/4 inch post, it is constructed of satin cast stainless steel, the strike keeper measures 2-1/2 inch x 1-7/16 inch x 1-7/8 inch. The mounting holes are at 1-1/2 inch.

1 1/4 Inch Smart Water Shutoff

Bring smart plumbing to your home with this product. This product is a smart home water security system that provides 24/7 protection by monitoring for water leaks—some as small as one drop of water per minute—and other vulnerabilities, no additional sensors are needed. Designed by plumbing and tech industry professionals, Flo Smart Water Monitor and Shutoff are installed on the main water supply line of the home. Through the Moen Plus App, you can see live water use, including water flow rates, pressure, and even temperature. If the Smart Water Shutoff detects an issue (e.g. high pressure, freezing water, or a small leak) it will alert you through the App, or other preferred notification methods, so you can assess the issue before it causes costly damage. If there is a catastrophic failure, like a burst pipe or someone leaves the water running, you will be alerted in the App allowing you to shut the water off remotely—no matter where you are. If you fail to respond to the alert or are on vacation, the device can be set to automatically shut off water to help limit damage and loss.

Incredible product - every homeowner must have. Just install on the pipe where water enters the home it monitors every fixture in the house. Easily catch leaks, running toilets, broken sprinklers etc. Eugene. New York, NY. Thu Jan 15 2026

This strike and keeper is constructed from Chrome Plated Zamak. Keeper is 1-1/4 inches X 2-3/8 inch X 2-9/16. Fits on 1-1/4 inch round edge posts and is used on inswing applications for Throw Latch (Emergency Entrance) and is ADA Compliant.

This standard duty capacity closer is used on out-swinging wood or metal doors. It also features an adjustable closing speed. Best used on medium-weight installations.

When it comes to quality, PROFLO is uncompromising—treating value and performance as equals. Craftsmanship and style work hand-in-hand to deliver the best possible product. From rough products to finished fixtures, PROFLO products are developed with both presentation and performance in mind.

Perfect part for new house. Originally ordered from a builder supply but part was wrong. I spoke with Customer Service who verified the correct part at Wayfair before sending. Quick shipping and professional customer service!. Deidre. Liberty, SC. Tue May 27 2025

Chrome

From finishes that are guaranteed to last a lifetime to faucets that perfectly balance your water pressure, Moen sets the standard for exceptional beauty and reliable, innovative design. Bring elegance to your home with premium selections from Moen. From the sophistication of period traditional to the streamlined refinement of minimalist contemporary, you'll find a host of amazing ways to express your style with products from Moen.

Finish matches my faucet. Looks great together. Marti. Northampton, PA. Fri May 15 2026

The recirculation kits performs multi-stage filtration and removes the odor from the gas and smoke that is sucked into the range hood, which removes harmful components and pollutants in the smoke, and effectively solves the problem of using range hoods in houses where the range hood cannot be exhausted. Do not try to clean the charcoal filter in the recirculation kit as it can not be cleaned, Please change the charcoal filter every 4-6 months (depending on hood usage)

This maximum security combination strike is constructed of stamped steel and it comes plated in a classic bronze finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3-inch. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush installation.

fits standard 1 3/4 deep door. Daniel. Thu Sep 11 2025

Slide Latch, 2-3/4" Centers, with Offset Bar, Chrome. 2-3/4 Inch Hole Center Spacing. Supplied With Offset Slide Bolt. Use with Bobrick Manufacturers.

Anonymous. Sudbury, ON. Wed Jun 12 2024

This slide latch and strike combo kit is constructed of stamped stainless steel with black rubber bumpers, and it comes in a satin finish. One-way installation fasteners are included with this latch.

Changing the look of your bath has never been faster and easier. The M-Pact common valve system allows you to upgrade the trim style or swap out finishes on your fixtures without replacing the valves. So once the system is in place, you can change your decor as often as you want at any point in time during the construction process or years down the road. All it takes is a few minutes. Best of all, the M-Pact common valve system is as easy to install as a standard valve.

Matched my Moen shower handle trim perfectly. Works great. Installed by my contractor.. Erika. South Elgin, IL. Mon Jun 08 2026

The faucet adapter Kit includes a snap-on snap-off 2-part faucet adapter and a Y-connector. Part A of the faucet adapter easily connects to a single sink faucet and can remain connected. Part B connects to Part A and to the Y-connector. The 2 split ends of the Y-connector allow connection to hot water and cold water hoses which attach to the washing machine. The snap-on snap-off feature of the faucet adapter allows for a quick one-step process to connect the water supply from the sink faucet to the washing machine. Once the washing machine has completed the laundry cycle, Part B along with Y-connector and hoses can be easily snapped off and removed from the sink faucet. Part A remains on the faucet for use when it’s the next time to use the washing machine.

This Truth Hardware Maxim Locking Handle by Prime-Line Products is designed for use with Truth hardware only. It is constructed of diecast zinc and comes in a beautiful, corrosion-resistant, white-painted finish that will match other existing Truth hardware in the same white finish. The dimensions are 3/4 in. in width, has a 1-3/8 in. projection, and a 3-13-16 in. height. Features a multipoint lock for maximum security. Self-tapping Installation fasteners are included.

Christina. AB. Fri Sep 20 2024

Gray, 30.13" H x 3.75" W x 1" D

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Fri Feb 20 2026

Take on tough pipe repair jobs with confidence using this Inner Pipe Cutter Drill Attachment, designed for efficient internal cutting of PVC and plastic pipes up to 6 mm thick. Perfect for cutting out drain stubs or trimming broken pipe ends, this cutter attaches easily to your power drill and delivers powerful cutting performance in hard-to-reach areas. Crafted from heat-treated steel, the cutter features a 1.2 mm thick blade with a sharp, saw-tooth edge for faster, cleaner cuts. The black-coated finish improves durability, while the nickel-plated shaft resists corrosion and maintains strength under pressure. Easy to install and operate, this tool is a must-have for plumbers, contractors, and DIYers. Just make sure the blade is locked tightly before use, and always wear protective gear to ensure safe operation.

Advanced Single Stage Filtration System Adapter Kit

Polished Chrome

iTempo Plus Steam Generator Control operates with an available wireless iGenie™ control. Mr.Steam® combines state-of-the-art technology and advanced display with a beautiful design to create Mr. Steam new in-shower iTempo Plus Steam Generator Control series.

Nice, heavy quality with a beautiful nickel finish. Have not used yet, will update once fully installed.. Amanda. MD. Tue May 02 2017

Engineered to require no electricity or routine battery replacement, Ecopower® technology is the perfect marriage of hands-free operation, low maintenance, easy installation, and ecology.

Shinco 30 pint dehumidifier protects you and your home by removing the moisture out of the air, it has a built-in humidity and temperature sensor which allow you to set your ideal humidity level from 80% to 30% in 5% decrement. Easy to use to improve you and your family's health and life comfort.

Perfect size. Easy to set up and empty. Easy dials to read. Just fits in nicely in my home.. Nancy. Des Moines, IA. Mon Jun 01 2026

8.4" H x 3.75" W x 0.95" D, White

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

FOTILE Perimeter Vent Series, 36 In Wall Mount Ducted Range Hood not only provides excellent performance but looks great as well. Capable of normally producing 565 CFMs, but with the WhisPower motor Technology and Capture-Shield extraction, it can achieve a maximum power of 1000 CFM and lowest noise level 44dB. It has a manual adjusgtable innovative Wing-Like Surround Capture Shield, that accelerates the smoke and grease extraction. An elegant Touch Screen Control panel with delay function lets the Range Hood work alone for 2 minutes after cooking to ensure all the smoke and odors are removed from your kitchen. An Auto Turbo System will let the hood run at the most powerful mode for maximum extraction capacity. There is also a screen lock function that prevents the unit from mis operation while cleaning it with a damp cloth. The EMS9026 will provide a whole new culinary experience for you and your family.

We are so pleased with this hood. The design is really nice and it is exceptionally quiet. We can actually hold a conversation while it is on. The customer service is also exceptional; they were very responsive to my questions and concerns over a damaged part. Overall, we are really happy with this high-end hood extractor.. Bz P. Dallas, TX. Fri Oct 27 2023