Primeline Fh 2320

Polished Brass

81% of residential intrusions occur through the first floor. We understand the importance of supplementing primary entrance door locks with our high-quality auxiliary door security products.

Good. Syed. Missouri City, TX. Thu Jan 29 2026

Brass

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Mon Jul 08 2024

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

These extended lip latch strikes are constructed of solid brass and come in a polished brass finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with each package. These latch strikes are used by many on wide jambs with decorative molding. Adjustment tip: to eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.

I was glad to find this extra length strike plate at your site, because I couldn't find anything like it in hardware stores, was about to make one out of brass myself.. Anonymous. Thu Aug 17 2023

White

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Mon Jun 23 2025

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Viren. Tustin, CA. Sat May 11 2024

8.4" H x 3.75" W x 0.95" D, White

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

Zinc Plated, 3.6" H x 3.8" W x 0.85" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

Stainless Steel, 6.05" H x 3.85" W x 0.55" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

These T-27 Torx screws are used together with T-27 barrel nuts where tamper-proof installation hardware is preferred. The heads require a specific screwhead to install or remove the typical Torx head cannot be used.

This strike and keeper is constructed from zinc alloy with a chrome plated finish. Often found on restroom partition walls that are 1-1/4 inch thick. They are easy to install.

Secure and restore your door hardware with the Prime-Line E 2568 Standard T-Strike Door Latch Strike. Designed for versatility, this latch strike functions as both a reliable replacement for worn components and a secondary locking option for sliding screen doors. Compatible with both wood and metal jambs, it provides a flexible solution for a wide range of residential applications. Constructed from solid brass with a durable bronze-plated finish, this strike plate delivers long-lasting performance while maintaining a classic, traditional appearance. The latch guard cover is engineered to work with most Grade 2 locksets and meets ANSI A156.2 standards, ensuring dependable functionality and compatibility with common door hardware systems. Installation is quick and straightforward with all necessary mounting hardware included, making it ideal for DIY repairs or upgrades. Measuring 1-1/8 inch by 2-3/4 inch with 2-1/8 inch on-center mounting holes, this strike plate is designed for precise fit and easy replacement. Perfect for maintenance, repair, or security upgrades, this Prime-Line latch strike combines durability, ease of use, and trusted performance. Always review dimensions to confirm compatibility before purchasing.

This maximum security combination strike is constructed of stamped steel and it comes plated in a classic bronze finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3-inch. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush installation.

fits standard 1 3/4 deep door. Daniel. Thu Sep 11 2025

These shower door bottom guides are constructed of plastic and come gray in color. Installation is easy with only two fasteners to replace, per the guide. The channels feature 1/2 in. wide openings that will allow for use with up to 7/16 in. thick glass panels. The use of these bottom-mount guides will help keep sliding glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

While not a perfect fit, it did the job. William. US. Mon May 12 2025

This outswing keeper is used with slide latch, fits on a square edge 3/4 inch post, it is constructed of satin cast stainless steel, the strike keeper measures 2-1/2 inch x 1-7/16 inch x 1-7/8 inch. The mounting holes are at 1-1/2 inch.

This maximum security combination strike is constructed of stamped steel and it comes plated in a satin nickel finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush install.

Matched perfectly with our new door entry combo. Secure for sure. What a difference.. Anonymous. Sat Mar 07 2026

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

Designed for use with a concealed latching mechanism, it assembles easily with a push nut fastener. This lever set has a 1-5/8 in. outside diameter, and it features an overall reach of 2-13/16 inches with a flat, slotted emergency-access knob on the exterior. Lever sets like these are used to replace broken and missing lever and knob sets of concealed latches. This Lever set is used by Sanymetal for use with steel doors, and it is easy to install. Note: Assembly will be permanent upon the first unification of both parts. Attempting to separate the inside and outside knobs once joined may damage the internal push nut component.

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed brass finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

1.88" H x 4" W x 6" D

These throw latch keepers are constructed of cast stainless steel and they come in a satin finish. They are ADA compliant, providing easy access when emergency entry is required. The keepers feature a slotted top & bottom opening for use with in-swinging left and right handed restroom stall doors. Keepers like these are manufactured in various dimensions for use with different latches, as well as in alternate finishes. These throw latch keepers are used by many, and they are simple to install. This item includes T-27 Torx security fasteners for installation of keeper. These fasteners feature tamper-resistant 6-lobe security drives with center pins.

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

These one-way barrel nuts are constructed of steel and come in a chrome plated finish. They feature a tamper-proof head which prevents them from being loosened or removed once installed. These fasteners are manufactured with #10-24 thread and have a reach of 5/8 in., with a 1/4 in. shaft outside diameter, and a 7/16 in. head diameter. One-way barrel fasteners like these are commonly used with one-way shoulder screws in commercial restroom applications. Installation of these types of security fasteners requires only the use of a (flat head) slotted screwdriver, while the removal of these fasteners requires a one-way screw remover tool.

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole. These stainless steel screws are rust and corrosion resistant.

This door strike is constructed of extruded aluminum and it comes in a clear anodized finish. It can be used with 1-inch thick restroom partition doors that swing-out. This flat strike features a tall black rubber bumper that measure 1/2 inch wide x 6-inch in height. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Fri Feb 13 2026

2.95" H x 3.2" W x 0.5" D, White

Flange nuts can help to save time by eliminating the need to use a separate nut and washer. The flange acts as a built in washer to distribute the load evenly. As with standard hex nuts, they can be installed using a wrench or socket set.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Aluminum

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Black

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted latch and it features a side- or face-mountable keeper with installation fasteners for both. This patio sliding screen door latch can be used on both single-active panel and dual-active panel sliding screen doors. These sliding screen door latches are extremely versatile. Sliding screen door locks like these provide secure latching capabilities as a primary or secondary latch. Secures sliding screen door from accidentally opening by pets or other animals. Order yours today and make your sliding screen door secure again.

This was a good alternative to the latch I wanted that you had but was out of stock.. Kevin. Minneapolis, MN. Mon Feb 06 2023

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

Brown

These door viewer privacy covers are constructed of plastic and are available in two colors. They feature a large 1-1/2 in. outside diameter cover for privacy and easy gripping. This fixed security device provides privacy against the use of reverse peephole spy tool lenses, like cameras, scopes, and phone apps. Fixed door viewer privacy covers like these can be used on apartment doors, office doors, service doors, homes, dorms, etcetera. This privacy cover mounts with a base plate and two fasteners and features a self-closing cover that must be pushed upwards for viewing thru the door viewer.

Excellent choice. Maribel. Jersey City, NJ. Fri Jan 19 2024

These shower door bottom guides are constructed of plastic and come clear in color. The channels feature . wide openings that will allow for use with up to 3/16 in. thick frameless glass panels. Use of these glue-in bottom-mount guides will help keep hanging glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

Great replacement. Anonymous. Mon Sep 22 2025

1.25" H x 4" W x 5" D

This strike and keeper is constructed from satin stamped stainless steel. Fits square edge posts Used on outswing applications for 3/4 inch posts.

This strike and keeper is constructed from zinc alloy with a chrome plated finish.

These horizontal bit key Locksets by Prime-Line Products are constructed of diecast metal and stamped steel components. The housing and keeper come in a black-painted finish, and the door knobs and rosettes come in a brite brass-plated finish to match other existing brass-finished hardware in the home. These types of locking devices are surface-mounted and do not require any mortise pockets to be drilled into the door panel edge. All systems are keyed-alike, and spare keys are available upon special order. Keyed different are not available. These locksets are for use on interior doors only, but they cannot be mounted on doors with pre-bored holes for modern-day door knobs.

Though the knob is not solid brass, for the price this is a very nice rim lock and looks great on the door in my 1852 farmhouse. It looks much more expensive than it is. I am pleased.. Alice. Madison Heights, VA. Fri Feb 06 2026

These shower door guides are constructed from white molded plastic. They are used to keep your shower doors properly aligned. They come complete with fasteners for a quick and easy installation.

This Prime-Line J 4636 Door Push is designed for use on any swinging door to help prevent scuff marks or other damage. Installation of this swinging door protector is quick and easy with the included hardware and pre-drilled mounting holes. Constructed from stainless steel with a removable PVC protective coating, this push plate has a stainless steel finish. This door protection plate measures 8 inch by 16 inch and is designed for use on 18 inch doors. For further dimensional information, please see the line drawing and compare with your needs before purchasing.

This combo deadlatch and deadbolt strike is constructed from steel and comes in a brass-plated finish. It features six 3 in. long screws that provide maximum security. This type of combo is quick and easy to install. Replaces standard latch and deadbolt strikes with one piece. May be used to repair split or damaged door jambs. Compatible with hole spacing from 3-5/8 in. to 4 in. center to center. For best results, follow the installation instructions included with each package. These strikes are easy to replace using only a few simple tools. For further dimensional information, please see the line drawing.

This door strike reinforcing kit by prime-line products is constructed of solid brass and comes in a beautiful, corrosion-resistant, classic bronze finish. This two-piece security strike kit allows for hole center flexibility in securing combination deadbolt and entry lock installation, as the two can be separate from one another as determined by existing door locking hardware. The deadbolt and entry lock strikes included in this kit replace most strikes and improves security with 3 in. Long screws are attached to the wall stud.

This strike and keeper is constructed from Satin Stamped Stainless Steel. It features mounting holes 1-7/8 inch on center. Fits square edge posts Used on outswing applications for 3/4 inch doors.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

perfect to upgrade the bifold doors I purchased.. Heather. Hendersonville, NC. Wed Dec 27 2023

This slide latch and strike combo kit is constructed of stamped stainless steel with black rubber bumpers, and it comes in a satin finish. One-way installation fasteners are included with this latch.

Unplated

This restroom partition replacement hardware is designed to repair 1-inch thick panels. It is constructed of cast metal and finished in a bright chrome plated finish.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This Defender Security brass single-cylinder surface deadbolt features a sturdy steel bolt and a security strike that anchors to the jack stud behind your door jamb. Features a sturdy steel bolt secured in a diecast housing, finished in a brass colored paint. Comes with a security strike that anchors to the jack stud behind the door jamb, and it features a five pin tumbler (Kwikset keyway) key cylinder which requires a 1-1/4 in. bore. Contains 1 surface deadbolt with locking cylinder, 2 keys, 1 mounting plate, 1 keeper and installation screws.