Primeline F 2762

By Granitestone

Our cookware is designed to withstand just about anything, all thanks to the triple external layer and a high-grade pressed aluminum inner component.

Perfect, non stick and sturdy. Alexus. Wed May 13 2026

By Prime-Line

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

By Prime-Line

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Mon Jun 23 2025

By Prime-Line

Brass

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Mon Jul 08 2024

By Prime-Line

White

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

By Prime-Line

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

By Prime-Line

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

By Prime-Line

Chrome, 6.05" H x 3.8" W x 0.85" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

By Prime-Line

This maximum security combination strike is constructed of stamped steel and it comes plated in a satin nickel finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush install.

Matched perfectly with our new door entry combo. Secure for sure. What a difference.. Anonymous. Sat Mar 07 2026

By Prime-Line

Chrome

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted latch and it features a side- or face-mountable keeper with installation fasteners for both. This patio sliding screen door latch can be used on both single-active panel and dual-active panel sliding screen doors. These sliding screen door latches are extremely versatile. Sliding screen door locks like these provide secure latching capabilities as a primary or secondary latch. Secures sliding screen door from accidentally opening by pets or other animals. Order yours today and make your sliding screen door secure again.

This was a good alternative to the latch I wanted that you had but was out of stock.. Kevin. Minneapolis, MN. Mon Feb 06 2023

By Prime-Line

These shower door bottom guides are constructed of plastic and come clear in color. The channels feature . wide openings that will allow for use with up to 3/16 in. thick frameless glass panels. Use of these glue-in bottom-mount guides will help keep hanging glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

Great replacement. Anonymous. Mon Sep 22 2025

By Prime-Line

When your pocket door privacy lock is broken or old, don’t replace the door entirely, just get a lock and pull! This deluxe pocket door privacy lock and pull has a wide, easy grip design and is for left or right-handed doors (see video for instructions on how to reverse handing). It also includes all the hardware needed for quick and easy installation. This pocket door pull and lock is constructed from solid brass, so it’s durable, strong and sure to last the test of time. This lock adjusts to install on both 1-3/8 inch and 1-3/4 inch thick doors and is a mortise installation.

Works great and happy to have the lock for privacy.. Debby. NC. Wed Nov 08 2023

By Prime-Line

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

By Prime-Line

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

By Prime-Line

This OUTSWING door latch set is constructed of zinc alloy (cast zamak) and comes in a chrome plated finish. These are the components included with this kit: One #650-2770 hook, one #650-6638 door stop, one #650-7265 top pivot hinge, #650-7262 bottom pivot hinge with 5/8 inch pintle, one #650-6530 strike & keeper, one ADA #650-9093 lever set, one #650-7205 candle cam and one #650-7663 pivot hinge pin, one (pair) of #650-2701 back-2-back door pulls with T-27 Torx security fasteners for installation of all components. These fasteners feature tamper-resistant 6-lobe security drives with center pins.

By Prime-Line

These horizontal bit key Locksets by Prime-Line Products are constructed of diecast metal and stamped steel components. The housing and keeper come in a black-painted finish, and the door knobs and rosettes come in a brite brass-plated finish to match other existing brass-finished hardware in the home. These types of locking devices are surface-mounted and do not require any mortise pockets to be drilled into the door panel edge. All systems are keyed-alike, and spare keys are available upon special order. Keyed different are not available. These locksets are for use on interior doors only, but they cannot be mounted on doors with pre-bored holes for modern-day door knobs.

Though the knob is not solid brass, for the price this is a very nice rim lock and looks great on the door in my 1852 farmhouse. It looks much more expensive than it is. I am pleased.. Alice. Madison Heights, VA. Fri Feb 06 2026

By Prime-Line

8.4" H x 3.75" W x 0.95" D, White

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

By Prime-Line

Defender Security U 9546 Brass Lock and Door Reinforcer assists in preventing forced entry by reinforcing the weak spot of an entry door. It can be used to reinforce and repair both metal and wood doors. Made of solid brass construction, the lock reinforcer plate comes finished in brassl. All the necessary mounting hardware is included for a quick and easy installation. The lock reinforcement plate is pre-punched for mounting. The reinforcer is designed for 1-3/4 inch thick doors that have mortise or drive-in latches. It features two 2-1/8 inch bores that are 3-5/8 inch on center, with 2-3/4 inch backsets. The door reinforcer is non-recessed. Please refer to the line art drawing for dimensions and compare to your needs before purchasing (Not Universal).

By Prime-Line

This slide latch and strike combo kit is constructed of stamped stainless steel with black rubber bumpers, and it comes in a satin finish. One-way installation fasteners are included with this latch.

By Prime-Line

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

By Prime-Line

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Fri Feb 13 2026

By Prime-Line

These shower door bottom guides are constructed of plastic and come gray in color. Installation is easy with only two fasteners to replace, per the guide. The channels feature 1/2 in. wide openings that will allow for use with up to 7/16 in. thick glass panels. The use of these bottom-mount guides will help keep sliding glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

While not a perfect fit, it did the job. William. US. Mon May 12 2025

By Prime-Line

This white powder–coated replacement latch lever kit is designed for use with Prime–Line part C 1280 and other surface–mounted levered handles. It includes everything needed for a quick and secure installation: 1 flat plastic washer, 1 wave washer, 1 lever pin, and 1 push nut. Made from durable diecast zinc with a white finish, this lever ensures long–lasting performance and a clean look for your sliding door handle set.

Parfait. Anne. Lavaltrie, QC. Wed Nov 27 2024

By Prime-Line

The threads on sheet metal screws are designed to pull two materials tightly together. When attaching metal to wood, it is especially important to pre-drill a hole. These stainless steel screws are rust and corrosion resistant.

By Prime-Line

Aluminum

This is a left-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has an attractive finish with mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

By Prime-Line

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed brass finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

By Prime-Line

By Prime-Line

These shower door guides are constructed from white molded plastic. They are used to keep your shower doors properly aligned. They come complete with fasteners for a quick and easy installation.

By Prime-Line

Gray, 30.13" H x 3.75" W x 1" D

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Fri Feb 20 2026

By Prime-Line

White

The Prime-Line K 55228 modern pull handle is a stylish and functional upgrade for any storm or screen door, featuring a sleek design with an inside latch for effortless operation—simply pull to open and push to close, with no buttons or levers required. Designed for universal compatibility, this handle fits doors ranging from 3/4 to 1-1/4 inches thick, and the package includes all necessary hardware for a seamless installation. Whether replacing an existing handle using pre-drilled holes or installing a new one, setup is simple with the provided installation template. This complete set includes a solid strike, inside latch, and all required mounting components to ensure a secure fit. Before purchasing, please check the line art drawing for dimensions to ensure it meets your needs.

By Prime-Line

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Viren. Tustin, CA. Sat May 11 2024

By Prime-Line

These one-way screws and barrel nuts are constructed of steel and come in a chrome-plated finish. They feature one-way, tamper-proof drive heads that prevent them from being loosened and removed once installed. The security drive heads of these fasteners allow for easy installation with a flat screwdriver, but require the use of a one-way screw remover tool. See item number 650-7901 for screw sizes 6-8, model number 650-7902 for sizes 8-10, and model number 650-7903 for sizes 12-14, or model number 650-7904, which includes one of each one-way screw remover hand tools.

By Prime-Line

Add an additional privacy lock to your interior doors with this flip action door lock. The hinged portion of the reversible lock flips over the door to lock, and it can be used for right or left-handed swing-in doors. An anti-lock out screw is included for child safe mode, preventing the lock from engaging on its own, for additional child safety measures. This lock should be installed high on the door. Installation is quick and easy, and the flip action door lock fastens to the door jamb with two screws. It’s a surface mount installation with no mortising required. Made of satin nickel, this door lock is strong and durable, sure to last the test of time.

By Prime-Line

This outswing keeper is used with slide latch, fits on a square edge 3/4 inch post, it is constructed of satin cast stainless steel, the strike keeper measures 2-1/2 inch x 1-7/16 inch x 1-7/8 inch. The mounting holes are at 1-1/2 inch.

By Prime-Line

Chrome

Prime-Line delivers trusted, high-quality hardware solutions for homes, farms, builders, and industrial professionals. Whether you're working on large-scale installations or fine-detail projects, Prime-Line has the right hardware in the sizes, materials, and finishes you need. This Prime-Line U 117168 3 inch Keyed Twist Knob Door and Gate Safety Hasp Hinge Latch offers a secure and stylish solution for small-scale projects like jewelry boxes, keepsake chests, and craft lockboxes. Crafted from stamped steel with a stylish finish, these hasps provide dependable security while complementing a wide variety of materials and finishes. Ideal for crafters and DIYers, they serve as a subtle yet effective barrier against unwanted access while maintaining a cohesive and polished appearance. This hasp features a built in keyed knob, allowing you to secure what you want without having to purchase an additional lock, and this comes with two keys. The finish resists rust, making this safety hasp suitable for both indoor and outdoor use. For added security, all mounting screws are hidden when the hasp is locked, preventing tampering or forced removal. Whether you need decorative hardware for crafts or heavy-duty security for your home or workplace, Prime-LIne provides dependable, corrosion-resistant solutions that stand the test of time.

By Prime-Line

This Defender Security brass single-cylinder surface deadbolt features a sturdy steel bolt and a security strike that anchors to the jack stud behind your door jamb. Features a sturdy steel bolt secured in a diecast housing, finished in a brass colored paint. Comes with a security strike that anchors to the jack stud behind the door jamb, and it features a five pin tumbler (Kwikset keyway) key cylinder which requires a 1-1/4 in. bore. Contains 1 surface deadbolt with locking cylinder, 2 keys, 1 mounting plate, 1 keeper and installation screws.

By Prime-Line

Designed for use with a concealed latching mechanism, it assembles easily with a push nut fastener. This lever set has a 1-5/8 in. outside diameter, and it features an overall reach of 2-13/16 inches with a flat, slotted emergency-access knob on the exterior. Lever sets like these are used to replace broken and missing lever and knob sets of concealed latches. This Lever set is used by Sanymetal for use with steel doors, and it is easy to install. Note: Assembly will be permanent upon the first unification of both parts. Attempting to separate the inside and outside knobs once joined may damage the internal push nut component.

By Prime-Line

The Prime-Line C 1201 Sliding Patio Door Handle is a non-keyed slide door handle replacement. It is non-handed for use on left or right sliding patio doors. The clamping mechanism on the sliding door handle replacement features a unique extruded aluminum saw-tooth style clamp that engages automatically when the slide door handle is in the locked position, and the door is slid closed. This sliding glass door handle consists of an extruded aluminum inside pull and a diecast constructed outside pull, both in a black- painted finish. The inside pull of the Prime-Line door handle features a decorative wood grain strip and the outside pull sits flush inside the framework of the sliding door panel. The door handle hook has mounting holes 3 inch on center. The clamp style sliding door handle includes mounting hardware. A Phillips head screwdriver is required for installation. Please refer to the line art drawing for dimensions and compare with your needs before purchasing.

Perfect size and it is what i was looking for. Kitae. Bakersfield, CA. Fri Mar 31 2023

By Prime-Line

Aluminum

This Prime-Line H 3959 is a universal folding crank handle that fits most casement operator crank spindles. It is diecast construction with a aluminum finish. The universal spline system fits most casement operators. It is easy to install. The folding design is often used to replace the normal crank handle to avoiding interference with window blinds.

By Prime-Line

This strike and keeper is constructed from zinc alloy with a chrome plated finish. Often found on restroom partition walls that are 1-1/4 inch thick. They are easy to install.

By Prime-Line

Secure and restore your door hardware with the Prime-Line E 2568 Standard T-Strike Door Latch Strike. Designed for versatility, this latch strike functions as both a reliable replacement for worn components and a secondary locking option for sliding screen doors. Compatible with both wood and metal jambs, it provides a flexible solution for a wide range of residential applications. Constructed from solid brass with a durable bronze-plated finish, this strike plate delivers long-lasting performance while maintaining a classic, traditional appearance. The latch guard cover is engineered to work with most Grade 2 locksets and meets ANSI A156.2 standards, ensuring dependable functionality and compatibility with common door hardware systems. Installation is quick and straightforward with all necessary mounting hardware included, making it ideal for DIY repairs or upgrades. Measuring 1-1/8 inch by 2-3/4 inch with 2-1/8 inch on-center mounting holes, this strike plate is designed for precise fit and easy replacement. Perfect for maintenance, repair, or security upgrades, this Prime-Line latch strike combines durability, ease of use, and trusted performance. Always review dimensions to confirm compatibility before purchasing.

By Prime-Line

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

By Prime-Line

The Prime-Line N 7536 sliding closet door roller kit ensures effortless movement for your closet doors, providing a seamless sliding experience with durable, top-quality components. This closet door roller kit includes both front and back roller assemblies, offering easy bypass of your sliding doors to ensure a perfect alignment. Built to last, the sliding closet roller kit features sturdy stamped steel brackets and roller wheels, ensuring reliable performance and long-term durability. Designed for straightforward installation, this roller guide kit comes with all necessary hardware, making it simple to replace or upgrade your sliding closet door kit with minimal tools required. The Prime-Line sliding closet door guide kit is compatible with most standard closet doors. For further dimensional information, please see the line drawing provided

By Prime-Line

This maximum security combination strike is constructed of stamped steel and it comes plated in a classic bronze finish. It features slightly taller latch and bolt openings to accommodate door hardware spaced from 5-1/2 in. to 6 in. from center to center. This security strike is designed to replace the standard (separate) latch and deadbolt strike plates with a one-piece combo plate and up to 5 more screws for maximum security. Installation of this combo strike repairs and strengthens a locked door with six 3-inch. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush installation.

fits standard 1 3/4 deep door. Daniel. Thu Sep 11 2025

By Prime-Line

This strike and keeper is constructed from zinc alloy with a chrome plated finish. It features 1-1/2 in. hole center spacing. Fits on 1-inch square edge posts and is for outswing applications with a slide latch.

By Prime-Line

These one-way barrel nuts are constructed of steel and come in a chrome plated finish. They feature a tamper-proof head which prevents them from being loosened or removed once installed. These fasteners are manufactured with #10-24 thread and have a reach of 5/8 in., with a 1/4 in. shaft outside diameter, and a 7/16 in. head diameter. One-way barrel fasteners like these are commonly used with one-way shoulder screws in commercial restroom applications. Installation of these types of security fasteners requires only the use of a (flat head) slotted screwdriver, while the removal of these fasteners requires a one-way screw remover tool.

By Prime-Line

Aluminum

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

By Prime-Line

This door strike reinforcing kit by prime-line products is constructed of solid brass and comes in a beautiful, corrosion-resistant, classic bronze finish. This two-piece security strike kit allows for hole center flexibility in securing combination deadbolt and entry lock installation, as the two can be separate from one another as determined by existing door locking hardware. The deadbolt and entry lock strikes included in this kit replace most strikes and improves security with 3 in. Long screws are attached to the wall stud.