Primeline F 27348

By Prime-Line

3/8 in

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sun Feb 22 2026

By Prime-Line

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Debra. New Braunfels, TX. Fri Jun 05 2026

By Prime-Line

Classic Bronze

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Tue Jul 09 2024

By Prime-Line

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Thu May 29 2025

By Prime-Line

These plastic turn buttons are used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw.

By LG

Complete your at-home laundry care system!

Appearance wise it is small, but it can fit 2 large coats. Tina. Sat Jan 17 2026

By Prime-Line

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Tue Jun 24 2025

By Prime-Line

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed chrome finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and a flat keeper used for outswinging doors, providing everything needed for a secure and reliable door locking solution.

By Prime-Line

This storm door closer repair kit includes replacement parts of components that are regularly lost during the installation of a pneumatic door closer, or during remodeling projects.

By Prime-Line

This is a casement operator track that is riveted or screwed onto the bottom of a steel casement window. It fits the older style casement operators Prime–Line parts H 3500 through H 3523, and H 3581 through H 3588. The guide disc on the tip of the operator glides through the track to open or close the window.

By Prime-Line

Black

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Thu Jul 17 2025

By Prime-Line

Stainless Steel, 3.85" H x 4.3" W x 0.3" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

By Prime-Line

Copper, 6.55" H x 5.35" W x 2.45" D

This is a solid brass door reinforcer in a classic bronze finish. Helps prevent a forced entry. Typically used on wood or metal doors that are 1-3/8 in. thick with mortise or drive-in latches. Accommodates key-in knob locksets or deadbolts, or combination locksets. It features one 2-1/8 in. bore with a 2-3/8 in. backset.

By Prime-Line

Stainless Steel, 6.05" H x 3.85" W x 0.55" D

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

By Prime-Line

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

By Prime-Line

These are bore reducer rings. Constructed of steel and comes brass-plated. They allow 1-1/2 inch and 1-3/8 inch lock cylinders to fit into a 2-1/8 inch diameter bore. Comes with everything you need for a quick and easy installation.

By Prime-Line

These shower door bottom guides are constructed of plastic and come clear in color. The channels feature . wide openings that will allow for use with up to 3/16 in. thick frameless glass panels. Use of these glue-in bottom-mount guides will help keep hanging glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

Great replacement. Anonymous. Tue Sep 23 2025

By Prime-Line

These extended lip latch strikes are constructed of solid brass and come in a polished brass finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with each package. These latch strikes are used by many on wide jambs with decorative molding. Adjustment tip: to eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.

I was glad to find this extra length strike plate at your site, because I couldn't find anything like it in hardware stores, was about to make one out of brass myself.. Anonymous. Fri Aug 18 2023

By Prime-Line

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Sat Feb 14 2026

By Prime-Line

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

By Prime-Line

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

By Prime-Line

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

By Prime-Line

Silver

This mortise latch unit features recessed grips on both sides so it can slide into your wall without obstruction. It has a center tab to easily retrieve your door from the wall. Comes complete in a nice satin.

Was what I needed. Right size. Great finish.. Anonymous. Yellville, AR. Fri May 26 2023

By Prime-Line

When your pocket door privacy lock is broken or old, don’t replace the door entirely, just get a lock and pull! This deluxe pocket door privacy lock and pull has a wide, easy grip design and is for left or right-handed doors (see video for instructions on how to reverse handing). It also includes all the hardware needed for quick and easy installation. This pocket door pull and lock is constructed from solid brass, so it’s durable, strong and sure to last the test of time. This lock adjusts to install on both 1-3/8 inch and 1-3/4 inch thick doors and is a mortise installation.

Works great and happy to have the lock for privacy.. Debby. NC. Thu Nov 09 2023

By Prime-Line

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

By Prime-Line

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Tue Jul 26 2022

By Prime-Line

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Beautiful. Would be better if all the screws were long. You get 2-1” screws and 1- 3”screw. It’s also a little pricey compared to the black and silver. It would be nice if they’d make a satin gold instead of the shiner old fashion gold.. Angela. Fort Worth, TX. Thu Jan 12 2023

By Prime-Line

6.3" H x 7.1" W x 2.15" D, Satin Nickel

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and an angled keeper used for inswinging doors, providing everything needed for a secure and reliable door locking solution.

By Prime-Line

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

By Prime-Line

Satin Nickel

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Wed Feb 01 2023

By Prime-Line

This is a white plastic roller assembly. The roller is made of brass flat edge and is most often used by Elco, Better- Bilt Aluminum, and a variety of other manufacturers.

By Prime-Line

This is a door lock reinforcer. Helps in preventing forced entry. Can be used on any wood or metal door that is 1-3/4 in. wide. The reinforcer is made of solid brass. Overall size is 3-7/8 in. wide and 9 in. tall, has a 2-1/8 in. borehole size and a 2-3/8 in. backset.

By Prime-Line

Bronze

This is a left-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has an attractive finish with mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

By Prime-Line

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

By Prime-Line

These shower Door bottom seals by Prime-Line Products are constructed of vinyl and come clear in color. They feature water-deflecting flaps that extend 5/16 in. beyond the frameless glass shower door bottoms. These seals mount onto the bottoms of 3/8 in. thick frameless glass shower doors, and fit glass panels that measure up to 36 in. wide. These are slip-on-fit seals and no adhesive is necessary. These seals are used by many shower door manufacturers.

The product seemed good. Unfortunately it didn’t fit our shower because the sweep was too big compared to the space between the bottom of door and base.. Lori. London Canada. Tue Jun 16 2026

By Prime-Line

These storm door hinge pin kits include 6 sets of white nylon pins and bushings. They feature an overall height of 1-7/16 in. and 5/16 in. outside diameters. These nylon pins and bushings fit into the ends of storm door hinges to create pivot points, and they are used by Croft storm doors.

By Prime-Line

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

By Prime-Line

This cam housing door insert is constructed of zinc alloy (cast zamak) and it comes in a chrome plated finish. This item fits on partition door panels that have round edges and measure 1 inch thick. This hardware is designed for use with partition hardware manufactured by General.

By Prime-Line

These pilaster shoe kits are constructed of an 18 gauge steel anchor bracket and a 22 gauge, satin-finished stainless steel pilaster shoe. They feature a 3-inch tall reach and square ends. Each bracket is slotted at the horizontal base, on each end for ease of installation. The anchor brackets are used to install the pilaster shoes in commercial restroom partitions, and all installation fasteners are included with each kit.

By Prime-Line

The Prime-Line Rams Horn Clip (Chrome, 250‑Pack, SKU PL 14854) is a durable spring steel clip uniquely shaped like a ram’s horns. Designed with a bright chrome finish, these clips measure 1‑5/8″ wide and are ideal for securing half‑screen assemblies to window and door openings. Each bulk package includes 250 clips, offering an efficient solution for bulk repairs or installations.

By Prime-Line

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

By Prime-Line

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

By Prime-Line

Black

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted latch and it features a side- or face-mountable keeper with installation fasteners for both. This patio sliding screen door latch can be used on both single-active panel and dual-active panel sliding screen doors. These sliding screen door latches are extremely versatile. Sliding screen door locks like these provide secure latching capabilities as a primary or secondary latch. Secures sliding screen door from accidentally opening by pets or other animals. Order yours today and make your sliding screen door secure again.

This was a good alternative to the latch I wanted that you had but was out of stock.. Kevin. Minneapolis, MN. Tue Feb 07 2023

By Prime-Line

These anchor clips are constructed of cast stainless steel and they come in a satin finish. Together they feature a 1/4 in. offset and two (2) pre-punched installation mounting holes. This item includes one pair of clips; an inside and outside leaf, and they are used for fastening partition panels to restroom partition pilasters. The T-27 Torx security fasteners included with this item feature tamper-resistant 6-lobe security drives with center pins.

By Prime-Line

4" H x 4" W x 7" D

These drywall screws are constructed of steel and come in a black colored phosphate plated finish. They feature a Phillips head drive and a bugle style head. These fasteners are designed to install drywall and Sheetrock, also known as gypsum board, wallboard and plasterboard, and are used by some for the construction of small to mid-size carpentry and wood working projects. This item contains 250 sharp point #8 x 2-1/2 in. drywall screws.

By Prime-Line

The Defender Security U 9591 Stainless Steel Lock and Door Reinforcer assists in preventing forced entry by reinforcing the weak spot of your door. It can be used to reinforce and repair metal, fiberglass and wood doors. Constructed of stainless steel, the lock reinforcer plate comes in a natural stainless steel finish.  All the necessary mounting hardware is included for a quick and easy installation. The lock reinforcement plate is pre-punched for mounting. The reinforcer is designed for snug fit on a 1-3/8 inch thick doors that have mortise or drive-in latches. Measuring 4-5/16 inch wide by 4-1/2 inch tall, the reinforcement plate accommodates key-in knob locksets on doors that have 2-1/8 inch bore sizes, with a backset of 2-3/4 inch from the edge of the door. The door reinforcer is non-recessed to fit over your existing latch.

By Prime-Line

This shower curtain hanger repair tab is constructed from clear plastic. It features an adhesive backing for quick installation. These tabs are used to repair tears in your plastic shower and liner curtains. Best results are achieved when repair tabs are applied on both sides of each tear.

The discs worked well to help prolong the life of my shower curtain.. Anonymous. Mon Jan 05 2026

By Prime-Line

Stainless Steel, 6.1" H x 3.95" W x 0.45" D

Prime‑Line® wood screws provide strong, reliable fastening for a wide range of woodworking, home repair, and construction projects. Designed with sharp points and deep, coarse threads, these screws deliver excellent holding power in solid wood, plywood, and particle board while helping draw materials tightly together. Ideal for furniture assembly, cabinetry, trim work, shelving, framing, and general household repairs, Prime‑Line wood screws install easily using standard hand or power tools. For best results, they are intended for use in properly sized pilot holes to help reduce splitting and ensure a secure, long‑lasting fit. Manufactured from quality materials for durability and consistent performance, Prime‑Line wood screws are trusted by DIY homeowners and professionals across the U.S. to complete projects with confidence and dependable results.