Orac Decor W116bp

3/4 in. D x 9-7/8 in. W x 78- 3/4 in. L. Primed white plain bar polyurethane panel moulding (6 pack)

Designed by Orio Tonini, Orac Decor’s CX189 crown molding features a compact angular design and is designed to incorporate LED lights if desired. *Note: LEDs not included in your order* The indirect lighting profile can be used as an uplighting or downlighting system, or as general lighting. LED indirect lighting produces a beautiful glow on the ceiling and creates a warm atmosphere in your home. It is made of DUROPOLYMER, a specially formulated polyurethane resin that is high density, water resistant, and impact resistant. This durable material will not warp with changes in temperature or humidity. Moldings come with a primed surface that is ready to paint. With integrated glue grooves, installation is fast and easy. We guarantee a full warranty when you use Orac Decor’s FDP500 adhesive. This interior molding also exists in a flexible form, CX189F.

Awesome product! Easy to work with and cut down. Super easy to paint!. Caitlyn. Fri Feb 21 2025

This elegant LED profile offers a beautiful solution to subtly incorporate indirect lighting into a classic interior.

We added to our walls, attached with trim screws for quick mounting into studs, and painted easily to match. Easy to mount, light to hold, and comfortable to cut.. Isaac. Chicago, IL. Fri Oct 03 2025

Orac’s popular C339 is a large cornice molding that combines two different design elements: flat and classical and can be used two ways: with the flat section against the wall or against the ceiling. It is made of PUROTOUCH, a high-quality polyurethane resin that is created in steel molds to replicate plaster and allow for crisp edges. Orac Decor moldings come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Installation is fast and easy. Our molding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. C339 is also available in Flexible form, FC339, which is ideally suited for curved walls and ceilings or creative use.

Photos before paint. Looks great in foyer with the hidden lights.. Raj. Plainfield, NJ. Sat Jan 18 2025

Orac’s popular c340 is a large cornice molding that combines two different design elements: flat and classical and can be used two ways: with the flat section against the wall or against the ceiling. It is made of pure touch, a high-quality polyurethane resin that is created in steel molds to replicate plaster and allow for crisp edges. Orac decor moldings come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Installation is fast and easy. Our molding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s deco fix adhesive. C340 is also available in a flexible form, fc340, which is ideally suited for curved walls and ceilings or creative use.

incredible product, lightweight, precise product.saved so much time. Takes paint finish easily.. David. Guelph, ON. Mon Jun 01 2026

Orac Decor CX190 U1Profile can be used as a baseboard, crown molding, or indirect lighting profile, depending on which way you install it. When used as a baseboard, it is ideal for renovations as it can cover your existing wall molding so you don’t need to remove it. Save time and money without the hassle, mess, and waste! In addition, its inner cavity is cleverly designed to hide electrical cables. When used as an indirect lighting profile, insert LED lights (sold separately) to produce a nice glow and add a warm ambiance. This versatile molding is made of Duropolymer, a polyurethane resin that is high density, water resistant, and impact resistant. This durable material will not warp with changes in temperature or humidity. Moldings come with a primed surface that is ready to paint. With integrated glue grooves, installation is fast and easy. We guarantee a full warranty when you use our FDP500 DecoFix Pro FDP500 adhesive.

I installed slat wood in my gym and the height was 3" short of the ceiling so I got creative. I installed this crown at the top of the panelling that served as a channel for LED color-change lighting (smart lights so I could voice control). It turned out so much better than expected it's like being in a professional studio. It diffuses the light just enough and shines it up to the ceiling. I couldn't be happier with the result and it was stupid easy to install...just some construction adhesive and bam...installed.. Jenna. Highlands Ranch, CO. Tue Jan 27 2026

Combining contemporary styling with smart engineering, Orac Decor C356 is one of a series of newly introduced flat cornice moldings (See Orac Decor C353, C354, and C355) and has an asymmetrical profile with an extended top surface projection across the ceiling. An innovative, recessed fine shadow line optimally encompasses and utilizes the natural light within your environment to yield an unexpected floating effect between itself and your walls. Orac Decor C356 cornice molding is suited for use with other Orac moldings and millwork. Pre-primed and ready for painting or staining. This cornice molding is not available in a flexible format.

Light and easy to work worth! Added the final touch to my fully renovated bathroom. I did all the work myself and took longer than anticipated but adding this ceiling crown and installing Smart LED Strip lighting gave it the Cherry On Top I was hoping for.. Alex D. US. Tue May 23 2023

Our new stately cornice mouldings are the perfect finish for your space. They provide an elegant transition between wall and ceiling. The new CX176 gives your space just the extra punch it needs!

Looks great. Easy to install. Very light. My hubby is a rock star.. Jonai. Niskayuna, NY. Sun Jul 05 2020

You want to transform your bare walls into eye-catching elevations, or you just want to add some subtle class to your room? The new DX174-2300 case molding does the job.

First delivery rails snapped in hafe but used second ordered perfect shape Love the rails. Nancy. Wolf Creek, OR. Sat Feb 21 2026

Our Orac Decor baseboard molding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This molding features one-piece construction which eliminates the need for build-up and the possibility of post-construction separation or cracks. Produced from Duropolymer, a high-impact polystyrene specially formulated by Orac Décor, which offers pronounced detailing and crisp, clean lines. Our Orac Decor baseboard molding offers high-impact resistance and can be used in high-trafficked areas. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labor. 4" High x 1/2" Projection.

Transform your home with the board and batten wall panel kit, perfect for creating a sophisticated accent wall in any 8ft space. Imagine elevating your living room with a sleek, modern look, adding charm to a plain hallway, or giving your dining area a cozy, elegant vibe. This 94 x 54-inch kit, complete with 10 pre-cut molding trim slats and 2 shelf edge strips, installs effortlessly with construction adhesive, making it ideal for DIY enthusiasts. Whether refreshing a nursery or upgrading a bathroom, these paintable, moisture-resistant polystyrene panels bring lasting style and depth to your interior decor.

We bought these as a last minute update for my daughter’s room and wow was it super easy to install and it’s turning out really well with some paint! Would def buy again - they are light and easy to apply to the wall. Brittanie. San Diego, CA. Tue May 26 2026

Our Orac Decor baseboard molding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This molding features one-piece construction which eliminates the need for the build-up and the possibility of post-construction separation or cracks. Produced from Duropolymer, a high-impact polystyrene specially formulated by Orac Décor, which offers pronounced detailing and crisp, clean lines. Our Orac Decor baseboard molding offers high-impact resistance and can be used in highly trafficked areas. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labor. 4" High x 7/8" Projection.

Like that it is waterproof and easy to install. Also that cords can be hidden is a nice feature. Kelly. Fort Mcmurray, AB. Fri Feb 13 2026

7/8 in. D x 8-1/4 in. W x 78-3/4 in. L Primed white high-impact polystyrene baseboard molding (9-pack)

Great product. We love it.. Ken. Oakdale, CA. Sat Apr 20 2024

6-1/4 in. x 2-3/8 in. x 78-3/4 in. Primed white plain polyurethane crown molding (10-pack)

Eunice. Paramus, NJ. Wed Apr 09 2025

Orac’s C353 Cornice Moulding combines contemporary design with smart engineering. This flat crown molding extends across the ceiling, providing an intriguing floating effect between itself and your walls, thanks to its recessed shadow line at the back. It is made of PUROTOUCH, a high-quality, high-density polyurethane resin that is lightweight and durable. In addition, it is primed white and ready for paint, glaze, or finish so it can perfectly match your interior. Installation is fast and easy. Our molding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive.

What a great product! Lightweight and easy to cut with a fine blade in a miter saw. No chipping of finish when cutting. Installed a 13 x 13 room in under 3 hours with two people. Used the standard adhesive (blue tube) to secure it to a painted ceiling. Paint was sanded prior to installation. Recommend using the joint adhesive and filler (orange and yellow tubes) as the results were flawless and the effort minimal.. Anonymous. Fri Feb 13 2026

7/8 in. D x 4in. W x 78-3/4 in. L Primed white high impact polystyrene baseboard moulding (20 pack)

Slavek. Sun Feb 09 2025

Orac Decor’s best-selling CX109 cornice molding has a contemporary design featuring a simple curve, with a crisp line at the bottom. It is made of Duropolmer, a specially formulated polyurethane resin that is high-density and impact-resistant. Orac Decor’s Cornice Mouldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, they come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Installation is fast and easy. Orac Decor moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. The CX109 is also available in Flexible form, FCX109, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics.

This is my third order of polystyrene molding. I love it. And it’s easy to cut and easy to handle.. Julie. West Grove, PA. Sun May 28 2023

If you're intimidated by wood crown, try foam! I'm actually very impressed with how real it looks. Installing them on our laundry cabinets was a breeze. We used a simple handsaw to cut miters. Glued it onto the cabinet, caulked some seams, and wa-la! Before painting, we did a quick sand and then two coats of paint. One thing about the foam I really like is once it's painted it looks smooth without any brush strokes -- looks factory painted just like the cabinets. Highly recommend and will try our primary bedroom next.. Anonymous. Wed Apr 29 2026

Primed White High Impact Polystyrene Baseboard Moulding (26-Pack)

The elegant and timeless design of the SX172 makes it fit into any interior. Our skirting boards are impact and water-resistant, already primed, and easy to paint. Combine them with the other profiles in the same style to create your unique room.

5/8 in. D x 1-5/8 in. W x 78-3/4 in. L. Primed white plain polyurethane panel moulding (40 pack)

Orac Decor 991 Crown Moulding contemporary cornice for a multitude of applications. With additional installation support, this profile can flawlessly hide curtain systems. This molding can also be used with LED lights to create the perfect mood lighting. It is made of Purotouch, a high-quality polyurethane resin created in steel molds to replicate plaster and produce crisp edges. Installation is fast and easy. Orac’s moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. In addition, moldings come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Distributed in the USA exclusively by Outwater Plastics, LLC, and Architecture by Outwater, LLC.

Using these to help add curves to a floating staircase, very easy to work with. Exactly as described.. Chase. Fri Mar 06 2026

This large, simple panel molding is part of the SQUARE family. Use this multifunctional profile to fit your entire home with the same skirting board. All you need to do is select the correct size to fit your space.

Our Orac Decor baseboard molding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This molding features one-piece construction which eliminates the need for build-up and the possibility of post-construction separation or cracks. Produced from Duropolymer, a high-impact polystyrene specially formulated by Orac Décor, which offers pronounced detailing and crisp, clean lines. Our Orac Decor baseboard molding offers high-impact resistance and can be used in high-trafficked areas. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labor. 4" High x 7/8" Projection.

Darwyn. Indianapolis, IN. Tue Aug 12 2025

CX123 Crown Moulding by Orac Decor has a large, traditional style profile that brings elegance to your interior decor. It is made of DUROPOLYMER, a specially formulated polyurethane resin that is high density and impact resistant. Orac Decor’s Cornice Mouldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, they come primed white and ready for paint, glaze or finish. Installation is fast and easy. Orac Decor moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. CX123 is also available in Flexible form, CX123F, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics.

Not a bad product. Just too small to overlay over the old molding. However, will work great in an area were we have no molding. Dj. NC. Mon Jul 25 2022

Primed White Plain Polyurethane Crown Moulding (11-Pack)

Easy to install, light weight, added extra molding on outside to cover glue underneath but also added more of an atheistic look.. Carlie. Denver, CO. Thu Mar 26 2026

Primed White Plain Polyurethane Crown Moulding (6-Pack)

Orac’s CF373 Flexible Moulding for Indirect Lighting was designed by award1winning designer Ulf Mortiz and consists of 2 modern profiles. Intended to enhance and modernize the existing architecture of your interior, it can be used to cover up imperfections and crevices in your wall or ceiling, as a crown moulding, panel moulding, or baseboard. Orac’s Flexible profiles offer great versatility and are far superior to anything one could achieve with timber or plaster. Get creative with your walls and ceilings push interior design to the limit with rounded lines, circles, and curves. This moulding conceals LED indirect light and creates subtle lighting effects by playing with light and shadow. Indirect lighting will bring warmth to a room as it adds a beautiful glow to the ceiling, eliminating the harshness of a single central pendant light fitting. Compact LEDs are easy to install, cost little to run, long1lasting, and eco1friendly. It is easy to install using typical woodworking tools and comes primed white and ready for paint, glaze or finish. Distributed in the USA exclusively by Outwater Plastics, LCC and Architecture by Outwater, LLC.

Inspired by English Georgian style homes, which often incorporate pilasters as trim around doors, this is small Corinthian pilaster capital corners with flourishes of acanthus leaves and volutes. When used in conjunction with its corresponding narrow fluted pilaster shaft, the product pilasters provide a true sense of elegance and grandeur to any room. Pre-primed and ready for painting or staining.

Orac Decor’s CX127 Crown Moulding has a timeless profile to suit all decoration styles. It is made of DUROPOLYMER, a specially formulated polyurethane resin that is high density and impact resistant. Orac Decor’s Cornice Moldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, they come primed white and ready for paint, glaze or finish so they can perfectly match your interior. Installation is fast and easy. Orac Decor moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. CX127 is also available in flexible form, CX127F, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics.

The ceiling moulding looks very nice and makes the room look high class. Connie Johnson, Brooklyn, NY. Cornelia. Brooklyn, NY. Sat Aug 09 2025

Orac’s C355 Cornice Moulding combines contemporary design with smart engineering. This flat crown molding extends across the ceiling, providing an intriguing floating effect between itself and your walls, thanks to its recessed shadow line at the back. It is made of PUROTOUCH, a high1quality, high1density polyurethane resin that is lightweight and durable. In addition, it is primed white and ready for paint, glaze or finish so it can perfectly match your interior. Installation is fast and easy. Our moulding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive.

Fantastic crown Molding but get yourself a contractor to cut it & make the corners if you try to do it yourself your gonna make mistakes.. Martin. US. Thu Jul 11 2024

Having attractively integrated contemporary linearity into an asymmetrical flat design, Orac Duropolymer® SX105F flexible baseboard moulding is appropriate for use in highly trafficked environments in which the potential for possibly damaging, inadvertent physical contact from furniture and household appliances is increased. The flexible format enables installers to easily create bend to fit radii right at the jobsite to accommodate the curvature of almost any radius application. Handles and installs with regular tools. Additionally, the Orac Duropolymer® SX105F flexible baseboard moulding is designed with an incorporated inner cavity to hide electrical cables.

Manufactured with a hard, strong surface that can withstand the rigors of any environment, Orac Duropolymer® Flexible CX123F cornice moulding exemplifies the traditional theme of Orac Decor.

Our Orac Decor baseboard molding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This molding features one-piece construction which eliminates the need for the build-up and the possibility of post-construction separation or cracks. Produced from Duropolymer, a high-impact polystyrene specially formulated by Orac Décor, which offers pronounced detailing and crisp, clean lines. Our Orac Decor baseboard molding offers high-impact resistance and can be used in high-trafficked areas. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labor. 5-7/8" High x 1/2" Projection.

Our Orac Decor crown moulding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This moulding features one-piece construction which eliminates the need for build-up and the possibility of post construction separation or cracks. Produced from Duropolymer, a high-impact polystyrene specially formulated by Orac Dcor, which offers pronounced detailing and crisp, clean lines. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labor. 1" High x 5/8" Projection x 1-1/8" Face.

Great product and fast delivery.. William Mark. Wisconsin Rapids, WI. Sat Dec 20 2025

Orac Decor’s C343 Cornice Moulding features a traditional design inspired by popular decor of old English country houses. The deep, asymmetric curve gives the crown molding an even more pronounced sense of depth for an extradimensional effect. Orac Decor’s C343 crown molding is made of PUROTOUCH, a high1quality polyurethane resin that is created in steel molds to replicate plaster and allows for crisp, intricate designs. This authentic cornice molding comes in four versions that comprise Orac Decor’s Heritage Collection: C341 (M), C342 (L), C343 (XL) & C344 (XXL). The C341 (the smallest size) is also available in Flexible form, FC341, which is ideally suited for curved walls and ceilings or creative use.

beautiful, light, easy to set up one negative is the length (only 6ft) so you do end up with more seams than i would like positive - the brand has a good selection, and the material doesnt shrink/crack as the house settles. Anja. Jersey City, NJ. Mon Mar 11 2024

5-1/2 in. x 4-3/8 in. x 78-3/4 in. Primed white plain polyurethane crown molding (6-pack)

Looks beautiful once installed. Very happy with it.. Operations. Sun Mar 15 2026

Larger version of Axxent PX103 panel moulding. Manufactured with a hard, strong surface that is appropriate for use in highly trafficked environments in which the potential for possibly damaging, inadvertent physical contact from furniture and household appliances is increased, the soft baroque curls and minimalistic design of Axxent PX103 panel moulding unite to merge the past and the future together as one. In addition, this profile is particularly well suited for use as a baseboard cap to finish off the bottom of a baseboard, especially to hide any gaps when the floors are not even.

This was perfect size and profile to create panel moldings on my walls. Was easy for my contractor to work with. Painted up nicely after installation.. Andrea. Parker, CO. Mon Feb 09 2026

Primed White High Impact Polystyrene Baseboard Moulding (36-Pack)

Excellent crown moulding! The material is lightweight but feels durable. It was easy to cut and install, and it gave my room a very professional, finished look. Would definitely buy again.. Kashif Badar. Sun Feb 08 2026

Orac Decor C332 cornice moulding is an extra large cornice moulding that is designed for use in large scale applications, and can be installed horizontally or vertically. Made of polyurethane, it is exceptionally strong, lightweight, and easy to handle. Orac Decor’s ceiling moldings are great for renovation work because they can cover up imperfections in your wall and/or ceiling, and they are lightweight and easy to handle. In addition, they come primed white and ready for paint, glaze or finish so they can perfectly match your interior. Installation is fast and easy. Orac Decor moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. Distributed in the USA exclusively by Outwater Plastics, LCC and Architecture by Outwater, LLC.

Orac’s C305 Corncie Moulding features a unique contemporary design made up of two distinctive profile shapes. It is made of PUROTOUCH, a high1quality polyurethane resin that is created in steel molds to replicate plaster and allow for crisp, intricate designs. Orac Decor ceiling moldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, they come primed white and ready for paint, glaze or finish so they can perfectly match your interior. Installation is fast and easy. Our moldings can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. Distributed in the USA exclusively by Outwater Plastics, LCC and Architecture by Outwater, LLC.

Anonymous. Mon Jun 01 2026

Accent Wall Panels Kit:Refresh your walls in minutes. This wall molding kit is engineered for easy installation—each piece comes machine-cut with pre-mitered edges, so there’s no measuring, no cutting, and no mess. Made from high-density polystyrene, it looks like real wood but won’t warp, crack, or get damaged from humidity or temperature changes. It arrives ready to install and fits both renters and homeowners who want a quick, elegant upgrade.

The best value for the money to add sophistication to your portfolio room. Chuck. Kenneth City, FL. Sat May 16 2026

The soft baroque curls and minimalistic design of the PX120F meet up to integrate past and future. Not avant-garde, not antique, simply unique. This profile can be used as a baseboard cap to finish off the bottom of baseboard, especially when the floors are not even and can be used as panel moulding to create wall frames or wainscoting. The PX120F is the big brother to the PX103 and works well in conjunction with the SX118 baseboard moulding. The PX120F is also available in our signature Flex. Flex profiles are really versatile and the finish is far superior to anything one could ever achieve with timber. Especially with design being pushed to its limits these days; rounded lines, circles and curves galore, you will install those flex to your walls and ceilings without any effort at all.

Orac Decor C391 Cornice Mouldings for Indirect Lighting or Curtain Profiles features a modern staircase design. It is perfect as an original, modern cornice or as a practical solution for hiding a curtain rail or LED lighting. The chamfered corners at the top and bottom also create a subtle line of shadow that further accentuates the linear pattern. It is made of PUROTOUCH, a high-quality polyurethane resin that is created in steel molds to replicate plaster and allow for crisp, intricate designs. Orac’s Cornice Mouldings are great for renovation work because they can be used to cover up imperfections in your wall and/or ceiling. In addition, moldings come primed white and ready for paint, glaze, or finish so they can perfectly match your interior. Installation is fast and easy. Our molding can be installed using typical woodworking tools, and the integrated glue grooves guarantee a swift glue application. For best results, use Orac Decor’s Decofix adhesive. Distributed in the USA exclusively by Outwater Plastics, LCC, and Architecture by Outwater, LLC.

Love it, love it , love it. My ceilings look so great and modern.. Tatiana. Bayside, NY. Sat Jun 12 2021

Our Orac Decor crown moulding can easily enhance the current design style of any space. Resistant to moisture and can be used in high humidity and damp areas, such as bathrooms or basements. This moulding features one-piece construction which eliminates the need for build-up and the possibility of post construction separation or cracks. Produced from Duropolymer, a high-impact polystyrene specially formulated by Orac Dcor, which offers pronounced detailing and crisp, clean lines. Easily installed with Orac Decor's proprietary adhesives allowing you to cut down on cost and labor. 4-3/4" High x 2-3/8" Projection x 5-1/4" Face.

Orac Decor’s C900 Cornice Moulding for Indirect Lighting is a large up1lighter lighting trough inspired by Ovolo architecture, a convex, quarter-round molding that is ideal for larger rooms. It is uniquely designed to incorporate compact LED or fluorescent lights. Producing a beautiful glow on the ceiling, this creative uplighting system adds a warm atmosphere and depth to a room. Indirect lighting can also be used as general lighting. Orac’s Mouldings for Indirect Lighting can just as easily be used without lights, if desired, making them adaptable to any space. It is easy to install using typical woodworking tools and comes primed white and ready for paint, glaze, or finish. C900 is also available in Flexible form, FC900, which is ideally suited for curved walls and ceilings or creative use. Distributed in the USA exclusively by Outwater Plastics, LLC, and Architecture by Outwater, LLC.

Excellent product with easy install.. Jay. Hutchinson Island, FL. Mon Apr 14 2025

3/4 in. x 3/4 in. x 78-3/4 in. Primed white plain polystyrene crown molding (40-pack)