Nylon Bypass Door Bottom Guides 2 Pack Primeline N 6558

By Cyan Design

Embrace rustic charm in your living space with this solid wood side table. Its unique design , crafted from natural wood, adds a touch of nature to any room.

Beautiful distressed wood. Looks hand carved. Way too expensive, though.. Eileen. NY. Tue Jan 21 2020

By Prime-Line

it works great was easy to install. Christian. Saint Petersburg Fl. Mon Dec 21 2020

By Prime-Line

White

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Thu Jul 17 2025

By Prime-Line

These shower door bottom guides are constructed of plastic and come clear in color. The channels feature . wide openings that will allow for use with up to 3/16 in. thick frameless glass panels. Use of these glue-in bottom-mount guides will help keep hanging glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

Great replacement. Anonymous. Tue Sep 23 2025

By Prime-Line

72" H x 3" W x 0.5" D, Satin Nickel

This bottom track is constructed from roll-formed steel and comes finished in champagne gold. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller assemblies. They feature a double-grooved track as used by a variety of mirror door manufacturers, and can easily be cut for custom installs. These replacement tracks are sold individually and the installation fasteners are not included.

It was the correct size and fit beautifully. Wheel’s on the closet door slide beautifully on the track Price was great and I love Wayfair Thank you. Carol. Thu May 15 2025

By Leatherneck Hardware

Brushed Nickel

Have a creative barn door hardware project, but want flexibility at the close or open due to the dimensions of your barn door or opening? This Track Slide Door Stop is easy to install and is guaranteed to stop where you need it to be. Beautifully designed, this appealing stop will enhance any sliding door hardware project. Two Slide Stops are required, one at each end of the track.

Works perfectly for double barn doors.. Morgan. Smithfield, VA. Fri Feb 20 2026

By Prime-Line

This wardrobe door pivot bushing is constructed from nylon. It features a 3/8 inch inside diameter and 5/8 inch outside diameter. This type of pivot bushing is used with Slimfold bottom pivot rods.

Was the wrong size. Took about 3 months to come in.. Michel. Mon Mar 02 2026

By Prime-Line

This door guide is constructed from nylon. It features an adjustable bottom mount design. It fits on doors that are 3/4 in. to 1-3/8 in. thick.

By Prime-Line

By Prime-Line

White

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Wed Feb 01 2023

By Prime-Line

These shower door guides are constructed from white molded plastic. They are used to keep your shower doors properly aligned. They come complete with fasteners for a quick and easy installation.

By Prime-Line

This Spring Loaded Bi-Fold Door Top Guide is constructed from nylon and features a steel bracket. It features a top mounted, spring loaded, design that is easy to install.

By Prime-Line

This is an adjustable stamped steel sliding closet door floor guide, with nylon tips. The guides are made of white nylon and can be adjusted to accommodate doors from 3/4 inch to 1-1/4 inch wide. Used by a variety of closet door manufacturers.

Just what I needed to stabilize my sliding closet doors. I bought the doors from Wayfair, and they’re great, but they only included two of these floor guides for a 10 foot wide door. These really enhanced the function of the beautiful doors.. Ballroom Dancer. New England. Sun Jul 27 2025

By Prime-Line

These guides are constructed from nylon and mount to the bottom of your door rails. Use one pair for a single door of any thickness, or they can be installed in a series for multiple door applications. Comes complete with fasteners for a quick and easy.

Work as expected. Quick shipping.. Sara. Omaha, NE. Sat Mar 04 2023

By Prime-Line

It worked. Peter. Delta, BC. Sat Nov 16 2019

By Prime-Line

This is a side mount, top hung, adjustable wardrobe door roller assembly with a single 7/8 inch convex nylon wheel for the back door panel. The stamped steel bracket assembly is adjustable and has a 1/2 inch offset. It fits 3/4 inch to 1-3/8 inch thick doors. Used on Atlas closet door systems. For the front door panel use Prime-Line part N 6667.

By Prime-Line

These bottom mounted door guides help to keep your bypassing doors on track. They feature a snap-in design that makes for easy installation. Designed for steel frame bypassing doors. Fits Cox brand doors.

By Prime-Line

These shower door bottom guides are constructed of plastic and come gray in color. Installation is easy with only two fasteners to replace, per the guide. The channels feature 1/2 in. wide openings that will allow for use with up to 7/16 in. thick glass panels. The use of these bottom-mount guides will help keep sliding glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

While not a perfect fit, it did the job. William. US. Tue May 13 2025

By Watchmen

The sliding door guide is a necessary part of installing the sliding door, which keeps the door stable and prevents the bottom of the door from swinging backward. This is an upgraded floor guide of different thicknesses (up to 2.65 inches). To enhance the functionality and aesthetics of your home, our floor guides can be run on almost any size and thickness of the barn door set. Beautiful in all types of rooms, such as bedroom, bathroom, dining room, kitchen, bathroom, wardrobe, garage, etc. Our products are durable, high-quality finishes, rust resistant, and rugged for indoor and outdoor use. Tips: If there is a baseboard on the wall of the barn door, please try to see if it needs to make the door upright before buying this floor guide This barn door guide can be applied to 200lb doors The height of the roller from bottom to top is 1.29 inches.

Great product. Francisco. US. Thu Mar 19 2026

By Lazio

These are heavy and well made but unfortunately we can't use them with our sliding door. They stick out too far from the wall. But I purchased them because I didn't want to screw the door glide into my new hardwood floor and these go into the baseboard. We tried but they were too big, further, the door needs to be on the track in the floor so we used the floor guide that came with the door instead.. Ka. Sull. Wed Jun 03 2026

By Prime-Line

This is a top guide that fits on top of the Cox Series 21 Door Systems. The guides are handed left and right, and snap into the frame accordingly. You will want to use the Prime-Line part N 6817 roller assembly for the bottom of the door.

By Prime-Line

These bi-fold guide caps are constructed of nylon and come in an off-white color. They fit 1/4 in. diameter steel pins, and they are used on bi-fold doors constructed by Slimfold, and they are easy to install.

By S&Z TOPHAND

FLAT BOTTOM DESIGN: It fits completely flush to the floor. It is made of high quality carbon steel with anti-rust treatment and black matte finish for both inner and outer doors.

Nicely made. Good accessory for barn doors. Look good. Samantha. Baxley, GA. Sun Sep 17 2023

By Prime-Line

This is a set of two black door bumpers that can be used on most closet doors or many patio doors. Each bumper is a 1 in. diameter and 1 in. long black rubber bumper. The rubber bumper is fastened on the appropriate door jamb to prevent slamming. Patio doors usually use one on the opposite side of the opened side to prevent slamming when the door is opened. Fasteners are included.

By Leatherneck Hardware

The 142 Series Adjustable Wall Mount Guide is a simple, yet a time-saving alternative. The classic and stylish features make it a great match for any sliding barn door.

The mount that came with the barn door we were installing was a floor mount, which would have required drilling through concrete. This easily installed on the wall and the adjustable bracket enabled the door to slide easily! Loved this hardware!. Sandra. Suwanee, GA. Thu Sep 08 2022

By Prime-Line

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Sat Feb 14 2026

By Prime-Line

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

By Prime-Line

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

By Homacer

2-in-1 Adjustable - Adjusting the L-shape tongue to catch the groove or clip of the door on.

Make sure you have enough door clearance from the floor because the height of the unit is pretty tall (screw head, two plates, and a nut). Kent. San Jose, CA. Mon Sep 20 2021

By Prime-Line

This bi-fold door guide is constructed from stamped steel and includes a nylon cap. It features a bottom mount design and is used to keep your bi-folding doors aligned. This style guide is used on Roberts and other similar styled bi-folding doors.

By Lazio

The length of this product is 4-13/16 ". If you find it too long, please consider other products.Easy to install: Mount to the wall with screws, and no groove is required for the door. Adjusting the rollers in the track to fit your door panel. No need to drill holes in the floor.

Works very well. Easy to modify with some washers and spacers and longer bolts from Lowe’s if you don’t happen to mount your door low enough.. Sarah. Alexandria, VA. Thu May 28 2026

By Homacer

24"

Homacer provides you with affordable and easy-to-install mini version interior sliding barn door hardware kits (doors not included) for your barn doors. Our mini hardware kits are perfect for cabinets and small shelf spaces. Our modern black rustic metal design fits door weights to a total of 50lbs. Our track and nylon wheels allows smooth and silent gliding at all times. As a company in the US, we have a professional customer service team here to assist you with any questions that you have with our products and ensure your satisfaction with our products.

Excellent product … matches description perfectly. Can’t wait to make my doors and get them installed.. Daniel. Hilliard, OH. Tue Aug 15 2023

By Prime-Line

Satin Nickel

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Tue Jul 09 2024

By S&Z TOPHAND

FLAT BOTTOM DESIGN: It fits completely flush to the floor. It is made of high quality carbon steel with anti-rust treatment and black matte finish for both inner and outer doors.

Works perfect, good quality. Mary. Plainville, MA. Tue Apr 28 2026

By Deltana

1.9375" H x 2" W x 1.5625" D, Paint Black

Deltana is an architectural hardware manufacturer with a proven record for exceptional service and quality. Deltana inventories America's largest selection of architectural and door hardware in over nine fine finishes made from solid brass, zinc, aluminum, steel, and stainless steel. With an array of fine finishes, find hinges, bolts, bumpers and stops, ball catch, roller latches, door accessories, and home accessories that compliment your home's decor. The Deltana bolts with concealed screws are a contemporary alternative to improve security and appearance.

Product appears to be well made but I haven't installed it yet.. Andy. Redlands, CA. Sat Mar 07 2026

By Stone Harbor Hardware

Satin Nickel

Stone Harbor Hardware offers several replacement parts designed to work with Sliding Door Hardware, including door guides. The mounting plate of this hardware measures 1-3/4 inches by 13/16 inches and 1/8 inches thick and features two mounting holes that offer a center-to-center distance of 1-3/16 inches. The guide backs measure 13/16 inches wide and feature a total projection of 15/16 inches. All of the necessary mounting hardware is included for a hassle-free installation. Stone Harbor Hardware products are manufactured with durable materials to create a long-lasting and high-quality product that matches other Stone Harbor Hardware items of the same finish. Check out the rest of Stone Harbor Hardware’s items to explore more hardware solutions for your home.

By Prime-Line

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

perfect to upgrade the bifold doors I purchased.. Heather. Hendersonville, NC. Thu Dec 28 2023

By Prime-Line

Prime-Line D 1579-C Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 48 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Fit perfectly!. Gordon. Sun Apr 12 2026

By Prime-Line

This is a top guide for Acme mirrored panel doors. The stamped steel housing snaps into a slot on the inside of the door frame. The plastic top guide slides in an upper track above the door. For the bottom roller assembly use Prime-Line part N 6790.

By Prime-Line

Prime-Line MP1583 Sliding Door Repair Track is designed to restore smooth operation to worn or damaged sliding track systems on aluminum doors. This replacement door track cap slips over existing damaged tracks, providing a simple and effective solution to prolong the life of your sliding door. Built to last, the patio track is made of high-quality stainless steel for maximum durability and rust resistance, ensuring long-term performance. Simply prep the existing door tracks, apply a thin bead of silicone glue, and snap the repair track into place using a rubber mallet and block of wood for a secure fit. Each replacement sliding track measures 3/16 inch x 72 inch x 1/4 inch and comes in a convenient 2-pack. For further dimensional information, please see the line drawing before purchasing.

Anonymous. Mon Nov 03 2025

By Prime-Line

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

By Stellweilan Tessberg

1.6" H x 60" W x 1.6" D, Silver

Our Bypass Sliding Door Hardware Kit, Meets Your Various Needs：This bypass door hardware kit, composed of high-quality aluminum tracks and a three-wheel pulley system, ensures smooth and stable sliding. It is suitable for various indoor spaces such as living rooms, kitchens, bedrooms, and bathrooms.

Perfect for my closet door project.. James. Tue Jan 06 2026

By Lazio

Craftsmanship, excellence and innovation are our primary pursuits. We enjoy the working with raw materials to make them into something extraordinary. Trustful quality and workmanship is what you can expect when you choose WINSOON. We lead the way in sliding barn door hardware and we invite you to create something unique.

works like it is supposed to, looks nice too. Stacy. West Monroe, LA. Mon Mar 09 2026

By Lazio

This U shape floor guide farewell to other obstacles floor guide model. The floor guide is installed on the wall behind the door. It occupies less space, reduces the prominent part of the product. Protect the sliding stability of the barn door, avoid friction and collision with the wall. The flush bottom design ensures the wall guides sit on the floor without scratching the floor. Wall-mounted design can fix the door of different heights and suitable for various scenes.

We've needed these on our barn door for a long time, glad I finally found them!. Tricia. St George, UT. Sat May 17 2025

By Prime-Line

This sliding closet door bottom guide is constructed of plastic and comes white in color. These bottom guides feature a universal design, and they are able to accommodate 1-3/8 in. thick by-passing closet doors. The mounting holes of these floor guides are spaced apart at 4-3/16 in. from center to center, and they feature 1-1/8 in. tall fins. These bypassing sliding closet door bottom guides are easy to install and are used by a variety of closet door manufacturers.

By Prime-Line

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Tue Jul 26 2022

By HomLux

Black

The flush bottom design allows the door to needn't grooved and does not destroy your beautiful floor. Durable and working smoothly for maximum efficiency and quiet.

They'll work just fine. Still have contractor redoing the bathroom so not installed yet.. Anonymous. Picayune, MS. Fri Apr 17 2026

By Prime-Line

These panel wardrobe door guides are constructed of stamped steel and include nylon inserts. Included with this pair of guides are 1 left-hand and 1 right-hand door guide, both which mount at the bottom of older style Acme and Stanley wardrobe doors. These guide assemblies have an adjustable height feature, and also act as corner brackets while holding the sides and door bottoms together. These replacement door guides are easy to install and they are used by a variety of door manufacturers.

Dawn. Etobicoke, ON. Thu Apr 04 2024