Diecast Screen Door Corner Insert With Screw 2 Pack Primeline B 569

These 3/8 inch by 1/2 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 3/8 x 1/2 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable black molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

Anonymous. Wed Apr 17 2024

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Wed May 28 2025

Chrome

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted latch and it features a side- or face-mountable keeper with installation fasteners for both. This patio sliding screen door latch can be used on both single-active panel and dual-active panel sliding screen doors. These sliding screen door latches are extremely versatile. Sliding screen door locks like these provide secure latching capabilities as a primary or secondary latch. Secures sliding screen door from accidentally opening by pets or other animals. Order yours today and make your sliding screen door secure again.

This was a good alternative to the latch I wanted that you had but was out of stock.. Kevin. Minneapolis, MN. Mon Feb 06 2023

Aluminum, 15.65" H x3.75" W x 1.65" D

This is a standard pneumatic screen door closer for medium weight wood or aluminum outswinging doors. It has a 10-1/2 in. long barrel and has an aluminum finish. It comes complete with mounting brackets and attaching hardware, and features an adjustable closing speed.

Amazing product Easy to install and best look for the entrance I’ll really recommended.. Claudia. Madison, NJ. Fri May 20 2022

Allows for maximum screen coverage on standard 30 to 36-inch sliding screen doors. Proper installation of the grille adds strength to the entire door and helps prevent screen fabric damage. Molded plastic grille body measures 26-1/8 inch wide x 20 inches tall. The tabs extend 4-1/8 inches and can be easily trimmed.

This storm door closer repair kit includes replacement parts of components that are regularly lost during the installation of a pneumatic door closer, or during remodeling projects.

These 1/4 inch by 5/8 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 1/4 x 5/8 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable white molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 100 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

White

This is a 34-1/2 inch molded plastic screen door grille that allows for maximum screen coverage on standard 30 inch to 36 inch sliding screen door. Proper installation of grille adds strength to entire door and helps prevent screen fabric damage. Molded plastic grille body measures 26-1/8 inch wide x 20 inch tall. The tabs extend 4-1/8 inch and can be easily trimmed. Molded white plastic construction.

no complaints... a bit hard to drill through the plastic, wish the holes were pre-drilled, but manageable. David. Silver Spring, MD. Sat May 31 2025

These 1/4 inch by 9/16 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 1/4 x 9/16 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable white molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

These 15/32 inch by 1-1/16 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 15/32 x 1-1/16 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable champagne molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

Perfect for our door. We did have to order more than we needed, but it was what we were looking for.. Barbara. Georgetown, TX. Sun Mar 30 2025

These 1/4 inch by 5/16 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 1/4 x 5/16 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable white molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 100 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

This is an western style screen door pneumatic closer for light weight West Coast outswing screen doors. It has a black finish and comes complete with mounting brackets and attaching hardware. Internally lubricated, and has an adjustable closing feature to insure that the door is latched securely.

These 5/16 inch by 7/8 inch aluminum screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 5/16 x 7/8 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The miter cut design is largely used for larger screen frames, or in high wind areas or when pets are a concern for DIY users across the United States. Made from stamped aluminum, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The miter cut leaves a clean corner design that makes the screen frame look amazing. Installation is quick and does not require tools, fasteners, or adhesives, however a mallet or wood block are often used to seat the corners. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

Anodized, 3" H x 3.75" W x 40.5" D

These screen frame kits are constructed of roll-formed aluminum frame material and they come in an attractive color. Using the components of this kit a screen frame can be constructed. Additional items included in this kit include the square-cut corners, vinyl spline and a charcoal fiberglass cloth. These kits are available in other sizes and colors, and they are used by many for replacing damaged and missing screens. The screen frame material is intentionally cambered (curved) outward, which helps to prevent inward bowing when screen cloth is installed and stretched taut.

Bronze

This is a casement crank handle constructed in diecast aluminum and used with a 3/8 in. spindle. This fits any operator with a 5/16 in. bore spindle, such as the teardrop style casement operators (Prime-Line parts H 3502 and H 3508). It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 2-11/16 in. Make sure the set screw is tight to prevent slipping or stripping.

These plastic turn buttons are used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw.

Silver

Upgrade your storm and screen door latching system with the Prime-Line K 55177 Interior Latch, designed for versatility, durability, and a secure fit. offer long-lasting performance while enhancing your door hardware. The set includes brown screws ensuring the perfect fit. Designed for use with similar inside latches. For added convenience, installation fasteners are included for a quick and hassle-free setup. Choose the Prime-Line K 55177 for a secure, reliable, door latching solution.

This is a white flush mounted handle and latch set used by many patio door manufacturers. It has a steel hook latch with 1 inch standard spacing. This handle set will fit a minimum door thickness of 15/16 inch and up to a maximum thickness of 1-1/8 inch. It is 5-11/16 inch long and 7/8 inch wide with 5-1/8 inch mounting holes. Made of diecast metal, the handles fit flush into the screen door frame with an inside automatic locking feature.

was easy to install.. Gerald. Sacramento, CA. Fri Jun 27 2025

These corner/tilt keys are constructed of solid diecast and are sure to last a lifetime and feature a punch set installation. They easily fit into a 3/16 in. by 3/16 in. channel. Used on storm windows.

Satin Nickel

Try this new and improved design that is easy to operate and add an extra layer of security to your home with this Prime-Line Door Reinforcement Lock with integral pull. Designed to withstand 800 pounds of force that provides an unparalleled level of protection! This reinforcement lock has a spring-loaded design, solid brass construction and a white finish with an additional integral finger pull for easy operation. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and the door reinforcement lock comes with 3-inch hardened screws. Extra home security and peace of mind are well within reach and doesn’t have to come with the high price tag of an alarm system!

This reinforcement lock is very good quality. It was very easy to install, although I measured wrong the first time and had to move it. So, be careful and make sure you can close the door once it’s fully installed. It seems to be strong enough to withstand an intruder.. Melanie. US. Mon Mar 10 2025

Satin Nickel

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Wed Jul 16 2025

16.55" H x 1.65" W x 0.8" D, Nickel Plated

These Handyman Single Loop Closed Extension Springs are constructed of durable spring steel, and they come finished in a beautiful, corrosive-resistant, nickel-plated finish. Springs like these are used for a variety of household and professional applications, and they feature a generous deflection length of 22 inch. These springs are easy to install and are used by many. The outside diameters, lengths and gauge thicknesses vary between each of these springs, while their dependability does not. Use these springs for repairs around the house, in the office, vehicle, garage and in many other applications.

Has your screen near the handle on your door been damaged? Now you do not need to take your sliding screen door down to your local re-screening shop, just put this under the screen door handle and the issue is resolved. This can be added to your screen door ro help prevent fingers from damaging the screening near the handle. This screen shields provides protection to the screen fabric in and around the area around the screen door handle. Especially useful for any handle set that installs over the screen fabric. Prevents fingers from poking through the screen when reaching for the handle. Saves time and money and extends the life of the screen fabric. Order your now and help protect the screening aroung your door handle.

Satin Nickel

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Tue Jan 31 2023

These 7/16 inch by 3/4 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 7/16 x 3/4 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable bronze molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 4 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

The Prime-Line K 5051 spring-loaded screen door catch is constructed from high-quality steel with a durable zinc-plated finish, ensuring long-lasting performance and secure closure. Featuring single roller arms, it keeps your screen door firmly shut, preventing unwanted openings caused by loose or worn latches and door closers. Designed for universal compatibility, this catch fits most hinged-swinging screen doors and accommodates various door and casing thicknesses for a versatile installation. Equipped with smooth, no-mar plastic rollers, it protects your door’s finish from scratches while delivering consistent latching and smooth operation. For precise fitting, please refer to the line art drawing to confirm dimensions before purchasing.

This screen door closer jamb bracket is constructed from stamped steel and comes in a zinc-plated finish. It features a side-mount design and includes the necessary fasteners. This style bracket is designed for use with pneumatic door closers and is simple to install.

Bronze

Easily build, repair, and replace missing or damaged window screen frames with this Prime-Line Window Screen Frame. The aluminum window screens frames may be used in combination with solar screen fabric (sold separately) to create effective sunscreens that mount on the outside of your windows to block most of the sun's hot rays from entering your home. The aluminum screen frame is constructed with a thicker spline channel for added support. With everything needed in this window screen frame kit to make brand-new window screen frames, you can easily replace one that is missing or damaged. Frame materials are straightforward to work with, easy to cut to size and assemble. The window screen frame replacement measures 5/16 inch x 3/4 inch x 60 inch x 60 inch. Please refer to the line-art for dimensional information and compare with your needs before purchasing. Use PL 7808 for Bronze screen frame and use PL 7814 for white screen frame.

Black

The Prime-Line K 55552 Spring-Loaded Hinges are designed for durability, convenience, and versatility, making them the perfect upgrade for your doors. Constructed from high-quality steelthese heavy-duty hinges provide long-lasting strength and stability. Featuring a powerful spring mechanism, they enable automatic self-closing, ensuring doors shut securely without the need for manual effort—enhancing both safety and convenience. Suitable for a wide range of applications, these hinges are ideal for interior, exterior, storm and screen doors, especially in high-traffic areas. Installation is hassle-free, as each factory-sealed package includes all necessary fasteners for mounting on wooden doors. Before purchasing, please check the line art drawing for precise dimensions to ensure a perfect fit. Upgrade your space with Prime-Line K 55552 for reliable performance and smooth door operation.

These replacement hardware packs are for use when installing or repairing Prime-Line part MP4013 security bar locks, for patio sliding door security. All fasteners, brackets and miscellaneous installation hardware are included with this item. See manufacturer’s how-to video for detailed instructions, including how to install when the active panel slides on the exterior side of the home.

Works as advertised, definitely secures bar.. Carlos. Succasunna, NJ. Mon Jul 25 2022

This molded plastic screen door grille allows for maximum screen coverage on standard 30 in. to 36 in. sliding screen doors. Proper installation of the grille adds strength to the entire door and helps prevent screen fabric damage. The molded plastic grille body measures 26-1/8 in. wide x 20 in. tall. The tabs extend 4-1/8 in. and can be easily trimmed.

works well. Anonymous. Sat Apr 04 2026

These 7/16 inch by 1 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 7/16 x 1 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable white molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 20 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

These 5/16 inch by 3/4 inch aluminum screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 5/16 x 3/4 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The miter cut design is largely used for larger screen frames, or in high wind areas or when pets are a concern for DIY users across the United States. Made from stamped aluminum, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The miter cut leaves a clean corner design that makes the screen frame look amazing. Installation is quick and does not require tools, fasteners, or adhesives, however a mallet or wood block are often used to seat the corners. Each package includes 4 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

These horizontal bit key Locksets by Prime-Line Products are constructed of diecast metal and stamped steel components. The housing and keeper come in a black-painted finish, and the door knobs and rosettes come in a brite brass-plated finish to match other existing brass-finished hardware in the home. These types of locking devices are surface-mounted and do not require any mortise pockets to be drilled into the door panel edge. All systems are keyed-alike, and spare keys are available upon special order. Keyed different are not available. These locksets are for use on interior doors only, but they cannot be mounted on doors with pre-bored holes for modern-day door knobs.

Though the knob is not solid brass, for the price this is a very nice rim lock and looks great on the door in my 1852 farmhouse. It looks much more expensive than it is. I am pleased.. Alice. Madison Heights, VA. Fri Feb 06 2026

Zinc

The Prime-Line K 55518 Spring-Loaded Hinges are designed for durability, convenience, and versatility, making them the perfect upgrade for your doors. Constructed from high-quality steel,these heavy-duty hinges provide long-lasting strength and stability. Featuring a powerful spring mechanism, they enable automatic self-closing, ensuring doors shut securely without the need for manual effort—enhancing both safety and convenience. Suitable for a wide range of applications, these hinges are ideal for interior, exterior, storm and screen doors, especially in high-traffic areas. Installation is hassle-free, as each factory-sealed package includes all necessary fasteners for mounting on wooden doors. Before purchasing, please check the line art drawing for precise dimensions to ensure a perfect fit. Upgrade your space with Prime-Line K 55518 for reliable performance and smooth door operation.

This is a standard pneumatic screen door closer for medium weight wood or aluminum out swinging doors. It has a 10-1/2 in. long barrel and has a black finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.

Opal. Hugo, Oklahoma. Thu Sep 18 2025

These are 3 in. x 3 in. stick-on fiberglass screen patch for repairing holes and/or small tears in your fiberglass window screens and screen doors. It can be easily attached without using special tools. Easy to follow instructions are included. Each card has five (5) 3 in. x 3 in. patches and each package contains 10 cards. Gray finish.

Anonymous. Tue Nov 26 2024

This patio door lock is constructed from stamped aluminum. It features a steel hook and latch lever with a 3 in. on center hole spacing and includes an anti-lift shim. This lock can be used to replace W and F sliding glass door latches.

This is a pneumatic screen door closer for light to medium weight wood or aluminum outswing doors. It has a black finish and comes complete with mounting brackets and attaching hardware. It is internally lubricated and has an adjustable closing feature. It also has a fast latch feature to insure the door is latched securely.

Perfect. No problem with installation. It works.. Denise. Mon Feb 20 2023

Zinc, 4.75" H x 1.85" W x 1.05" D

These universal screen clips are constructed of diecast material and come in a beautiful finish. Each clip has an overall reach of 3/4 inch, and the height is adjustable from a flush fit, up to 7/16 inch when using the stackable rings of 2 different heights included with each set. These adjustable-height screen clips are used to secure window screens where there are uneven surfaces, and/or when the user is unsure of the correct height to use. This item includes two 1/16 inch thick rings and four 1/8 inch thick rings per clip, and each package contains 4 clips per package. Installation fasteners are included with each package.

These sliding screen Door latch and pull handles from Prime-Line Products are constructed of durable plastic and stamped steel components. The surface-mountable handles are constructed of plastic and come black in color, and the swivel latch is constructed of stamped steel. These economy latch and door pulls are non-handed and can be used on both left-hand and right-hand sliding patio screen doors. Installation of these screen door handle assemblies requires a 2-7/8 inch hole center spacing, with installation fasteners provided within each pack. This latch and door pull fits sliding screen doors manufactured by Keller screen doors, on doors that were manufactured between the 1960k's thru 197k'ss. Each measure is 1-inch wide and has a height of 3-1/2 inches. Note this model does not use a typical latch keeper, but instead uses a pin in the door frame that the latch hook engages.

White

Use the Prime-Line wall shield to protect interior walls from impact damage by shielding the point of contact on the wall from a door knob. The shield wall protectors can also be used to conceal small holes in walls and prevent further damage caused by a doorknob. These wall shield protectors are constructed from rigid vinyl. They have a paintable smooth surface, allowing you to easily match the protector to any wall. Quickly mount the 3-1/4 inch diameter wall hole covers in place using the self-adhesive backing. Please refer to the line art for dimensions and compare with your needs before purchasing.

There won’t be really a lot to say about these wall protectors however they are smaller than expected, which is not a complaint. That’s actually a positive. I’m quite happy because I’m going to use them to protect the wall with a baby gate.. Teresa. Visalia, CA. Thu May 21 2026

Gray

These 3/8 inch by 3/8 inch plastic screen frame corners are designed for repairing or constructing aluminum window screen panels using square cut frame ends. They fit standard 3/8 x 3/8 inch aluminum screen frame material and slide securely into the open ends of the frame to create a strong ninety degree corner. The square cut design eliminates the need for miter cutting, making screen repair and replacement simpler and more accessible for homeowners and DIY users across the United States. Made from durable gray molded plastic, these screen frame corners provide a lightweight and cost effective solution for replacing broken or brittle corners on existing window screens or for building new screens from raw frame stock. The exposed corner design allows a portion of the corner to extend beyond the frame end, which is typical for square cut screen assemblies and helps maintain proper frame alignment. Installation is quick and does not require tools, fasteners, or adhesives, making it ideal for routine maintenance, seasonal screen repairs, rental property upkeep, or large home projects. Each package includes 4 screen frame corners to support multiple repairs or full screen builds, offering excellent value for homeowners and professionals alike. These corners are intended for standard residential window screen applications and are commonly used in houses, apartments, and multi unit dwellings. Always compare your existing aluminum screen frame dimensions to the line drawing before purchasing to ensure proper fit and compatibility.

This screen and storm door latch set is constructed of diecast and plastic components and comes in a white painted finish. The handles are non-handed and can be used on both left, and right-hand closing wood or metal, screen, or storm doors measuring from 5/8 in. to 1-1/4 in. thick. This item fits a 1-3/4 in. mounting hole spacing and it includes a push-button activator, complete with a night lock feature that will not allow the door to be unlocked when engaged. This latch set is used by many screen door and storm door manufacturers. All items as pictured are included, together with installation fasteners.

This is a standard pneumatic screen door closer for medium weight wood or aluminum outswinging doors. It has a 10-1/2 in. long barrel and has an aluminum finish. It comes complete with mounting brackets and attaching hardware, and features an adjustable closing speed.

4.8" H x 1.85" W x 1" D, Gray

These window screen clips are constructed of plastic and come black in color. These clips feature a 1/16 inch offset, designed to hold aluminum screen frames on windows of various types. Plastic screen clips like these are also used to secure window screens, storm windows and panels of storm doors. These screen clips are easy to install and are used by many. Fasteners (#8 x 3/4 inch) are included with each sealed package.

Brass

These door viewers are constructed of solid brass housings and come in alternate finishes. The lenses of these viewers vary in type, some are made of U.L. Listed glass and others of plastic (non-U.L. Listed). Each features a 160 degree angle of view, and they can be installed on door thicknesses ranging from 1-3/8 in. thick to 2 in. thick, with a required 1/2 in. diameter hole. These door viewers are designed to help keep you safe when answering your door and they are ideal for day or night viewing when adequate exterior lighting is provided. Viewers like these are easy to install and they are used by many. As an available option, inside viewer covers (sold separately - not included with this item) prevent reversed visibility through door viewers from the exterior of the home, increasing the security and privacy of your home.

Aluminum

This storm door latch set is constructed of diecast, steel and plastic components, and it comes in an attractive finish. It features an inside night lock tab which prevents the outside plastic button from depressing when tab is engaged. This product replaces damaged or missing hardware from hinged-swinging screen and storm doors. Other features and components included with this kit include the following: spring-loaded lock keeper, outside push button handle, installation fasteners and instructions, 1-3/4 inch mounting holes, and it fits on doors that range in thickness from 5/8 inch to 1-1/4 inch.