Diecast White Sliding Window Sash Lock Primeline F 2594

White

These sliding patio door locks are keyed for extra security and help prevent unwanted opening of patio sliding doors from either side. The durable housings of these locks are constructed of diecast metal and they feature solid steel locking bolts that extend, retract, and lock into place. The security benefits of these socks help to prevent prying and lifting of the active panels, significantly reducing the chances of entry from the outside. Each set includes two sets of keys, installation hardware, and instructions, and they can be installed with a few simple tools.

Exactly what I needed to lock a closet sliding doors.. Lenir. New York, NY. Wed Feb 15 2023

This casement sash lock is constructed of diecast and comes in a white painted finish. It features 3 different strike plates for use with push-out and swing-in casement windows that are not operated with a standard crank-out operator. The steel rim strike (1 in. x 1-3/8 in.) and the diecast surface strike (1/2 in. x 2 in.) included with this item are used for swing-in casements commonly hung with steel butt hinges. The steel mortise strike (11/16 in. x 2-7/16 in.) is for use with push-out casements, also commonly hung with steel butt hinges. Some mortising may be required when installing the rim strike or mortise strike. All fasteners are included with lock hardware. These locks are used on old style wood casement windows.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

Just what we needed for my son’s windows!. Samantha. Erlanger, KY. Wed Aug 17 2022

White

If your sliding glass door handle is old, damaged or missing, don’t get a brand new door – just replace the door handle! This non-keyed Sliding Glass Door Handle Set makes the DIY project a breeze. Installation is quick and easy, all fasteners necessary are included, and the set is non-handed, allowing it to be used on both left and right-handed patio sliding doors. It is a clamp style with a surface mount and fits 4-15/16 inch hole spacing. The handle set fits on doors measuring 1 to 1-1/2 inch thick. If mounting on thicker doors, longer screws need to be purchased separately. The door handle set is constructed of diecast materials with a painted black finish, perfect for your black sliding door. Installation is quick and easy! Instructions and all fasteners necessary for the installation of this sliding door handle set are included in packaging. Due to the surface mounting, no mortising is required. The outside non-keyed pull is different in shape than the inside pull, and it can be changed to a locking outside pull using Prime-Line’s model numbers E 2000 or C 1120 (purchase separately). *Product Selection Tip: Besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center.

It was perfect and super easy to install on my own. The old lock had broken so I just needed a replacement for my old sliding glass door.. Anonymous. Tue Sep 19 2023

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

Do you have single or double-hung vertical sliding windows with loose-fitting, worn or missing slam latches? Besides adding a “new look” to your windows with a fresh set of locking hardware, these slam latching sash locks can help add peace of mind by restoring the security features on your vertical sliding windows that were manufactured by International Window Corporation (IWC). Each lock features a self-engaging, automatic latching mechanism that mounts on the checkrails (or meeting rails), of the pair of sash. These latches are constructed of diecast zinc and come in a corrosion-resistant, industry standard, white-painted finish to match other existing hardware that may already be in the home or office. Each set includes one latch, one keeper, installation fasteners and simple instructions. Installation of these slam latch sash locks is quick and easy, and it can be done with a simple handheld Phillips head screwdriver. Other design features include a 5/16 inch narrow keeper, spring-loaded latch, and 3-5/8 inch mounting hole centers. Compare the style and dimensions of this lock to those required on your sliding windows and order yours today.

This white powder–coated replacement latch lever kit is designed for use with Prime–Line part C 1280 and other surface–mounted levered handles. It includes everything needed for a quick and secure installation: 1 flat plastic washer, 1 wave washer, 1 lever pin, and 1 push nut. Made from durable diecast zinc with a white finish, this lever ensures long–lasting performance and a clean look for your sliding door handle set.

Parfait. Anne. Lavaltrie, QC. Wed Nov 27 2024

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

5.7" H x 3.75" W x 1.05" D, Silver

These chain door guards are constructed of steel chains, diecast housings, plates, and keepers, and they come in optional plated finishes. These locks engage by allowing the bolts to slide into the keyed mechanisms to lock. They use B1 keyways, ILCO (1098M). These chain door locks allow doors to open only slightly for safe viewing and ventilation. Installation of these locks mounted out of children’s reach will help prevent them from opening doors to enter or exit into dangerous or off-limit areas. All installation fasteners are included, and the locks can be used on a variety of door types, on or beside the door casings.

Very nice looking and useful key system to setup child lock even if you are going out.. Anonymous. US. Wed May 17 2023

This is an extruded aluminum sliding doorkeeper. It is surface mounted for hook-style latches. The dimensions are 2-1/2 in. in length, with a 1-1/2 in. width. It is used by Viking doors.

Do you have vinyl-framed single hung vertical sliding windows with loose-fitting, worn or missing locks? Besides adding a “new look” to your windows with a fresh set of locking hardware, these sash locks can help add peace of mind by restoring the security features on your single hung sliding windows that were manufactured by BetterBilt. Each lock features a cam-type locking mechanism that mounts on the checkrail of the innermost sash and engages into the keeper on the checkrail of the outermost sash. The locks are constructed of diecast zinc and come in a corrosion-resistant, industry standard, white-painted finish to match other existing hardware that may already be in the home or office. Each set includes one lock, one keeper, installation fasteners and simple instructions. Installation of these locks is quick and easy and can be done with a simple handheld Phillips head screwdriver. Other design features include a 5/16 inch narrow keeper, cam-action fastening, and 2-1/16 inch mounting hole centers. This model is a left-hand lock, and the right-hand lock is also available under the part number F 2626. Compare the style and dimensions of this lock to those required on your sliding windows and order yours today.

This is a sliding window lock that is keyed and securely locks window in closed or ventilating position. Securely locks window in closed or ventilating position.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This sliding patio door keyed locking unit by Prime-Line Products is constructed of diecast and comes in a corrosion-resistant, white-painted finish. This locking device is designed to convert non-locking Prime-Line patio door handle sets (model number: C 1174, C 1176 and C 1178) to keyed locking handles. This lock features a 5-pin tumbler with 2 keys. The lock body is solid brass construction with a hardened break-away tailpiece. Use to replace damaged key cylinders in most surface mount handles.

This is a white flush mounted handle and latch set used by many patio door manufacturers. It has a steel hook latch with 1 inch standard spacing. This handle set will fit a minimum door thickness of 15/16 inch and up to a maximum thickness of 1-1/8 inch. It is 5-11/16 inch long and 7/8 inch wide with 5-1/8 inch mounting holes. Made of diecast metal, the handles fit flush into the screen door frame with an inside automatic locking feature.

was easy to install.. Gerald. Sacramento, CA. Fri Jun 27 2025

The Prime-Line C 1263 Sliding Door Handle Kit is a dependable solution for older style sliding door, providing secure latching and enhanced functionality. This replacement door handle comes with an upgraded clamp for a stronger grip, ensuring your sliding doors stay securely shut for added peace of mind. Constructed from high-quality diecast aluminum, this glass door handle set is built to withstand daily use while maintaining its sleek, white finish. This sliding handle replacement mounts easily to the inside frame of the door and includes all necessary installation hardware. The door replacement handle can be converted to a locking handle with Prime-Line C 1041 or C 1139 (sold separately). The inside handle measures 2 inches tall with a 1/4 inch profile and 1/2 inch projection when locked. For further dimensional details, please refer to the line drawing before purchasing.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This sliding closet door bottom guide is constructed of plastic and comes white in color. Each bottom guide mounts with 2 fasteners and they are designed to accommodate 1-3/8 in. bypassing closet doors. This pack supplies 2 pairs of by-passing doors, or one 3-panel door system. The mounting holes of these floor guides are spaced apart at 4-3/16 in. from center to center, and they feature 1-1/8 in. tall supports. These bypassing sliding closet door bottom guides are easy to install and are used by a variety of closet door manufacturers.

Hi This is a good design for bi-fold doors with good spacing between doors. Ed. FL. Sat Jun 08 2024

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This patio door handle set comes with a black diecast inside handle with a hardwood pull. It is used by many patio door manufacturers. It can be used on either right or left-handed doors. The black diecast lever operates most mortise latches installed in the door (see E 2008, E 2009, E 2014 or E 2111). This is non-keyed but can be keyed by installing the Prime-Line E 2000 key cylinder into the outside handle. For thick doors order Prime-Line part E 2576 latch lever.

These Truth Hardware Sash Locks by Prime-Line Products are constructed of high pressure, corrosive resistant, diecast zinc and they come in a white baked-enamel finish. A concealed locking mechanism pulls rails together helping to reduce air infiltration. The mounting holes are spaced apart evenly, and they feature backset holes. The alignment lugs prevent side shift of the sash, and the slim-line design for narrow rail application With a lower profile it allows maximum sash opening. These locks are easy to install and used by many.

White

Try this new and improved design that is easy to operate and add an extra layer of security to your home with this Prime-Line Door Reinforcement Lock with integral pull. Designed to withstand 800 pounds of force that provides an unparalleled level of protection! This reinforcement lock has a spring-loaded design, solid brass construction and a white finish with an additional integral finger pull for easy operation. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and the door reinforcement lock comes with 3-inch hardened screws. Extra home security and peace of mind are well within reach and doesn’t have to come with the high price tag of an alarm system!

This reinforcement lock is very good quality. It was very easy to install, although I measured wrong the first time and had to move it. So, be careful and make sure you can close the door once it’s fully installed. It seems to be strong enough to withstand an intruder.. Melanie. US. Mon Mar 10 2025

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a white-painted finish. It is a left-handed lock and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with its keeper and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

This is a patio door slide bolt lock. Securely locks door in closed or ventilating position. Prevents sliding or lifting of door.

This patio door handle set comes with an inside handle with a hardwood pull and white diecast body. It is non-handed and can be used on right or left-handed doors. It is used by many patio door manufacturers.

Anonymous. Sat May 16 2026

This cam action window sash lock is constructed of stamped steel, and it comes in a white painted finish. It features a strong diecast lever, and its universal design allows it to fit with multiple manufacturer's windows. Lock is designed for use on vertical sliding windows constructed of wood, and can be used on both single and double hung sliding windows.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

Great fit fast delivery. Marcia. Pendleton Sc. Sat Oct 25 2025

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Not exactly what I wanted but I'll make it work. Anonymous. Sat May 06 2023

Do you have vertical sliding windows with loose-fitting, worn or missing locks? Besides adding a “new look” to your windows with a fresh set of locking hardware, these sash locks can help add peace of mind by restoring the security features on your vertical sliding windows. These locks can mount on most single-hung and double-hung vertical sliding windows constructed of wood, vinyl and aluminum. Each lock features a cam-type mechanism that is designed to draw the keeper in firmly towards the lock, providing your windows with tighter seals, better weatherizing, and increased security. They are constructed of durable diecast zinc, and come in a corrosion-resistant, industry standard white-painted finish to match other existing hardware that may already be in the home. Depending on the size of the sash, these locks can be used as singles or in pairs. Each set includes one lock and keeper, installation fasteners and simple instructions. Installation of these sash locks is easy and can be done with a simple handheld Phillips head screwdriver. Other design features include cam-action fastening and 2-1/4 inch mounting hole centers on both the lock and keeper. These sash locks mount on vertical sliding windows where the checkrails (also known as “meeting rails”) of both the inner and outer sash rest flush. Compare the style and dimensions of this lock to those required on your sliding windows and order yours today.

Marcia. Montgomery Center, VT. Sat Oct 25 2025

White

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This works perfect on our sliding door to connect the new dog door insert.. Erin. Oakley, CA. Tue May 17 2022

This is a left-handed Dyad casement operator with a white finish. The actuating arm is jointed with a clip on the end that catches onto the stud bracket that fits onto the sash. Hardened steel arms, worm drive and gears are protected with a corrosive resistant finish. The mounting holes are a blind tap meaning that the screws thread through the window frame and into the back of the operator housing.

Restore window security and improve performance with this Prime-Line Aluminum Window Sash Lock, designed for use on vertical and horizontal sliding aluminum-framed windows. Ideal for replacing worn, loose, or missing locks, this hardware upgrade helps ensure your windows close securely while maintaining proper alignment and function. This sash lock features a cam-action locking mechanism that mounts directly to the checkrail of the inner sash and engages with the outer sash—eliminating the need for a separate keeper. This design simplifies installation while providing a tight, secure hold that helps reduce air gaps, improve insulation, and enhance overall window security. Compatible with single-hung, double-hung, and some horizontal sliding windows, this lock offers versatile application across many aluminum window styles. The design accommodates both movable and fixed sash configurations, helping restore reliable operation in a wide range of setups. Constructed from durable diecast zinc, this sash lock is built for long-lasting performance. The white painted finish resists corrosion and blends easily with most window frames, maintaining a clean, consistent appearance throughout your home. The lock can be installed individually or in pairs depending on window size and support needs. Installation is quick and easy with a standard Phillips screwdriver, and all necessary fasteners are included. With 2-1/4 inch mounting hole centers and a 3/8 inch latch projection, it’s important to compare dimensions with your existing hardware to ensure proper fit before purchasing.

This screen and storm door latch set is constructed of diecast and plastic components and comes in a white painted finish. The handles are non-handed and can be used on both left, and right-hand closing wood or metal, screen, or storm doors measuring from 5/8 in. to 1-1/4 in. thick. This item fits a 1-3/4 in. mounting hole spacing and it includes a push-button activator, complete with a night lock feature that will not allow the door to be unlocked when engaged. This latch set is used by many screen door and storm door manufacturers. All items as pictured are included, together with installation fasteners.

Standard reversible surface mount for left or right-handed mortise-locking doors that have 3-15/16 on center mounting holes. The diecast inside pull has a wood handle, diecast thumb turn, and steel latch activator. The outside pull is diecast and keyed. A mortise lock is not included and is sold separately.

Very nice interior wood handle. Great quality.. Biserka. Burtonsville, MD. Fri May 24 2024

This Truth Hardware Casement Window Sash Lock by Prime-Line Products is constructed of diecast zinc and comes in a white-painted finish. It is a right-handed lock and it features a low profile design to remain in-line with the thickness of the window's sidestop trim. The mounting holes are spaced apart at 2-3/8 inches, on center, and it comes complete with its keeper and installation fasteners. When the lever is activated, the locking cam engages the keeper, drawing the window tightly closed against the weather stripping. These locks have a stepped underside and are easy to install.

White

Designed to fit sliding glass doors with fits 3 ¹⁵/₁₆ inches Hole Spacing, and 1-1/4" to 2-1/4" Door Thickness (Fabrication: 4 hole patterns)

It’s good! The back part didn’t work on my door so had to use the old one. Quality I’m not sure how good it is, came a bit scratched already! Let see how well it holds up though!. Kamit. Vernon Hills, IL. Sat Dec 07 2024

This is a right-handed Dyad casement operator with a white finish. The actuating arm is jointed with a clip on the end that catches onto the stud bracket that fits onto the sash. Hardened steel arms, worm drive and gears are protected with a corrosive resistant finish. The mounting holes are a blind tap meaning that the screws thread through the window frame and into the back of the operator housing.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

White

Works well on the bathroom's pocket door.. Anonymous. Tue Apr 14 2026

White, 7.4" H x 3.75" W x 1.2" D

This casement operator cover is constructed from high impact plastic and it comes white in color. It fits Pella casement operators and similar styled casement windows. This is a left-hand operator replacement cover for Pella casement windows, as determined (handing) by facing the window from the inside; looking out. For right-hand operators of the same style, see Prime-Line part H 4060.

This casement operator cover is constructed from high impact plastic and it comes white in color. It fits Pella casement operators and similar styled casement windows. This is a right-hand operator replacement cover for Pella casement windows, as determined (handing) by facing the window from the inside; looking out. For left-hand operators of the same style, see Prime-Line part H 4095.

White

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This white finish patio door handle is a surface with a hook latch style. Often found on older style patio doors, it is mounted on the door's inside the frame and the hook latch engages the keeper mounted on the jamb. It has a 7/8 in. low handle height. It is a white extruded aluminum inside handle with an anti-lift feature on the hook latch. The hook latch has a 7/16 in. profile. Mounting holes are 4-15/16 in. on center. It can be keyed by installing Prime-Line part E 2071.

This sliding patio door handle set is constructed of diecast materials and comes in a tan painted finish. The handle set is non-handed allowing it to be used on both left and right-handed patio sliding doors using 3-15/16 in. mounting hole centers. This handle set features a high profile handle and it is used to replace damaged or missing mortise/hook style handle sets on sliding glass doors. Installation instructions and all fasteners necessary for the installation of this handle set are included in packaging. The outside pull of this handle set can be converted to an outside locking pull using Prime-Line part E 2000. Product selection tip: besides matching the style and type of locking mechanism, the other main specification to match is the measurement of the mounting hole centers, from center-2-center. Note: due to numerous compatible options, the internal mortise lock body is not included with this item and must be purchased separately. See sample item; Prime-Line part E 2014.

White Brass

Crafted with precision, the Legacy Handle Set boasts a sturdy diecast construction, ensuring durability and longevity. The diecast material not only adds strength to the handle but also exudes a touch of sophistication, making it a standout addition to your sliding glass door.

Very Happy with my new Chrome Slider Lock. Service was excellent & delivery was quick as well. Thanks. Elizabeth. Manchester, NH. Thu Jan 15 2026

This plastic sash cam fits onto the upper top sides of the window (vent) that is sliding up or down. The sash cam and window then rest on the top guide of the sash balance. It has dimensions of the top being 1 in. wide by 5/8 in. deep and 1-5/16 in. tall. The width of this top guide needs to fit correctly in the window's track frame in order for it to slide up or down properly, and the depth allows the window to correctly rest on the top guide of the sash balance.