Bi Fold Door Surface Aligner Universal Handed 2 Pack Primeline N 6538

The double laundry hampers with lid and cloth liner are a great addition to any bedroom, laundry room, or bathroom. The double hamper features a lid keeping dirty clothes out of sight while also concealing any smells. The cloth liner is washable, making it great for many uses (cold water, gentle cycle: air dry or low tumble dry). It is constructed from natural bamboo, and the hamper offers you a durable yet lightweight solution to organizing your dirty clothes. The hamper can fit two standard-sized loads of laundry. Our laundry hamper will help you keep your home organized without being a big eyesore. It helps keep dirty clothes off the floor by offering a single location for your dirty clothes. The double hamper allows you to sort clothes by color, spouse, or child, saving you time on laundry day.

Perfect in every way! Nothing else to say!. Anonymous. Tue Mar 10 2026

Convert your hinged door into a self-closing door with Prime-Line safety spring door closer. This surface mounted door closer installs in minutes! Use this spring door closer on doors that weigh up to 150 pounds These closers are not handed, so they can be used on both left and right-handed hinged-swinging doors. The door closers feature an adjustable closing force and speed. Constructed of diecast materials with a white painted finish, this safety spring door closer can complement any style door. Each closer is U.L. listed with a 1/2 hour fire rating. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point of where it makes contact with the bullet-shaped housing of the closer. All fasteners and installation instructions are included with this item. For lubrication, avoid using WD-40 which actually breaks down lubricating grease. Instead, apply white lithium grease to internal compressing springs if desired or necessary. Other colors/finishes include: Black, brown, chrome plated and satin chrome plated. For a rust and weather resistant closure, consider model numbers KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. Do not overtighten, turning past 4 hole positions will cause this item to fail.

greagt. Stan. Bentonville, AR. Thu Jul 17 2025

These safety spring-activated door closers are constructed of diecast materials and come in a beautiful finish. They are U.L. listed with a 1/2 hour fire rating and can be used to close doors weighing up to 150 lbs. These closers feature an adjustable closing speed and they are non-handed, allowing them to be used on both left and right-handed swinging doors. Both the closer and the plastic slide plate are surface-mounted and are easy to install. These closers operate in a pushing-closed manner, rather than in a pulling-closed method, and they do not have a hold-open feature. Distance of travel: The closer arm of this safety spring closer has the ability to swing a full 180 degrees, but once it is mounted in place, the door’s distance of swing will be reduced to the point where it makes contact with the bullet-shaped housing of the closer. For a rust and weather resistant closure, consider Prime-Line parts KC50HD (white) and KC57US (brown) which are suitable for outdoor/exterior use, designed for use with lightweight gates and screen doors. All fasteners and installation instructions are included with this item. Other colors/finishes include: black, white, brown, and chrome plated. Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner. Application of white lithium grease to internal compressing springs may be desired, but you should avoid using lubricants like WD-40 which breaks down lubricating grease. Do not overtighten, turning past 4 hole positions will cause this item to fail.

Looks very good construction.. O. Etobicoke, ON. Wed Feb 01 2023

This wardrobe door pivot bushing is constructed from nylon. It features a 3/8 inch inside diameter and 5/8 inch outside diameter. This type of pivot bushing is used with Slimfold bottom pivot rods.

Was the wrong size. Took about 3 months to come in.. Michel. Mon Mar 02 2026

These bi-fold door guide caps are constructed of plastic and come 25 per pack. These replacement caps slide onto the tops of bi-fold guide rods to allow for smooth operation of doors. Use these caps to replace any worn or missing caps of matching dimensions to repair any poor, or rough-operating bi-fold doors. These caps are easy to install and used by many.

This Bi-Fold Door top or bottom pivot bracket by Prime-Line Products is constructed from stamped steel and it comes in a corrosion-resistant, zinc-plated finish. The bracket easily mounts into the top or bottom bi-fold door track, and it used by many manufacturers. These pivot brackets are easy to install with a few simple tools. It fits into a top or bottom track and helps to reduce binding at the pivot. Used on metal bi-folding doors.

These bi-fold closet door pivot caps are constructed from plastic and come in off-white. They fit 1/4 in. diameter steel pins, they are used on bi-fold doors constructed by a variety of manufacturers, and are easy to install.

This barrel nut and bolt set is constructed of steel and comes in a zinc-plated finish. Sets like these are commonly known as sex bolts in the hardware industry, as well as Chicago bolts. This barrel nut (sex bolt) features a long female threaded shaft (inside), which fastens with the mating screw's outside thread. Barrel nuts and bolts like these are used where through-bolting applications are desired with a head on both sides of the materials being joined. Sets like these can be used for mounting hydraulic door closers on doors from 1-3/8 inch to 1-3/4 inch thick.

This door aligner is constructed from steel and plated in a zinc finish. It is used in openings that are not entered from both sides. The universal design easily mounts to the back of your lead doors to keep them tightly closed.

This Bi-Fold Door top or bottom pivot bracket by Prime-Line Products is constructed from stamped steel and it comes in a corrosion-resistant, zinc-plated finish. The bracket easily mounts into the top or bottom bi-fold door track, and it used by many manufacturers. These pivot brackets are easy to install with a few simple tools. It fits into a top or bottom track and helps to reduce binding at the pivot. Used on metal bi-folding doors.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame. single cylinder deadlock in a white painted finish.

perfect to upgrade the bifold doors I purchased.. Heather. Hendersonville, NC. Thu Dec 28 2023

Enhance door security with this premium hotel door blocker, a trusted solution in the hospitality industry and beyond. Designed for in-swinging doors, this secondary lock prevents forced entry from the outside while allowing the door to open slightly for safe visitor identification. Commonly installed in hotels, motels, and commercial properties, it’s also ideal for homes, rentals, and offices seeking added security. Unlike traditional flip latches or chain locks, this blocker minimizes damage caused by slamming doors, preserving both door frames and hardware. Its durable satin chrome-plated finish delivers a professional, modern look that blends seamlessly with most décor styles. Easy to install with the included mounting hardware, this door blocker provides an effective upgrade to standard door locks without requiring specialized tools. Durable, stylish, and functional, it offers peace of mind for property owners and occupants alike.

Was my mistake. This item is not good for my door, but I give this item to my friend they can use it for there door.. Zoila. Jackson Heights, NY. Tue Apr 01 2025

These patio door lock pins are constructed of steel and come in a chrome-plated finish. They feature a 3/16 in. outside pin diameter and have a 2-5/8 in. long reach. Each set includes a pin holder on-chain for easy storage when not in use, and a retaining ring to add strength at the insertion point when the lock is engaged. These patio door pin locks are designed to secure the sliding door in place when in a closed or ventilating position. These lock pins include all installation fasteners and they are simple to install.

This Spring Loaded Bi-Fold Door Top Guide is constructed from nylon and features a steel bracket. It features a top mounted, spring loaded, design that is easy to install.

This bi-fold closet door pivot and bracket repair kit includes components constructed of steel and plastic, and fits 7/16 diameter holes. It includes one Prime-Line part N 6696 jamb and floor mount pivot bracket, one Prime-Line part N 6674 bottom pivot, two spring-loaded 3/8 in. diameter Prime-Line part N 6545 top pivots, one Prime-Line part N 6538 surface aligner and one Prime-Line part N-6539 door snugger. These repair parts are used on bi-fold doors manufactured by Acme, Cox and many others. Use these components to replace damaged or missing hardware to restore a bi-fold closet door system to optimal performance. Used on doors 1 to 1-3/8 in. thick and up to 50 lbs.

This bracket is constructed from stamped steel and comes plated in zinc. The bracket easily installs into the top track of your bi-fold door and accepts a 7/16 in. diameter pivot cap. This style bracket is best used with steel folding panel doors.

This is a stamped steel top pivot bracket. It fits into the Acme 5/8 inch wide track. The bracket is inserted into the track and as the screw is tightened, it forces the bracket against the lip running the length of both sides of the track. It is adjustable by moving it back or forth to the best position. Used with the Acme top pivot Prime-Line part N 6672.

This bi-fold door top pivot pin is constructed from steel. It features a black plastic retainer sleeve with a coil spring. This style pivot is used by Float Away steel framed doors.

These plastic turn buttons are used to secure window screens, storm windows, and storm door panels. Accepts a #10 screw.

The aligned work perfectly and are better quality than the ones that are on a few other bi-fold doors in house. There was a screw missing from the package but I had one of the same size. I'm very happy with them.. Phil. UT. Sat Feb 13 2021

This is a bottom mount pivot used by a variety of other bi-fold door manufacturers. The 7/16 inch diameter nylon base houses a 1/4 inch pivot bolt with a unique star adjustment nut.

This Bi-Fold Door bottom pivot bracket by Prime-Line Products is constructed from steel and nylon components, and it comes in a corrosion-resistant, zinc-plated finish. The bracket easily mounts onto the finished flooring beneath where your bi-fold door will be installed, and it accepts a 5/16 in. diameter pivot bolt head. This bracket is used by many manufacturers, and they are easy to install with a few simple tools. It also includes a self lubricating nylon bushing. For doors that are 1 in. to 1-3/8 in. thick. Fits Acme doors.

Great products and excellent service and delivery as promised!. Anonymous. Tue May 05 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

This is a wall mounted gravity pivot top hinge, for surface mount. Constructed of cast stainless steel satin finish. Pivot hinge is 2-1/4 in. tall x 1-1/2 in. wide. The lug projects out 1-11/16 in. and is 1/2 in. thick. The bushing on the lug is 5/16 in. diameter. Also used with Flush Metal and General Partitions.

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Tue Jul 09 2024

Prime-Line's U 117018 1-3/4 inch Fixed Safety Hasps offer a strong and secure solution for safeguarding doors, cabinets, gates, and more. Designed with a rigid, non-swiveling staple, these hasps provide enhanced durability and resistance to forced entry. When closed, all mounting screws are fully concealed, adding an extra layer of security and tamper resistance. For added protection, a padlock can be applied to the staple, making it ideal for securing valuable or restricted areas. Made from stamped steel in a matte black finish, these hasps can be used universally. Each package includes complete mounting hardware and easy-to-follow installation instructions.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Beautiful. Would be better if all the screws were long. You get 2-1” screws and 1- 3”screw. It’s also a little pricey compared to the black and silver. It would be nice if they’d make a satin gold instead of the shiner old fashion gold.. Angela. Fort Worth, TX. Thu Jan 12 2023

This is a bottom mount pivot used on Acme, Cox and a wide variety of different bi-fold doors. The steel base houses a 1/4 inch pivot with a hex head nut for adjustment. It fits 1 inch to 1-3/8 inch thick bi-fold doors weighing up to 50 pounds each.

This bi-fold door guide is constructed from stamped steel and includes a nylon cap. It features a bottom mount design and is used to keep your bi-folding doors aligned. This style guide is used on Roberts and other similar styled bi-folding doors.

Allows for maximum screen coverage on standard 30 to 36-inch sliding screen doors. Proper installation of the grille adds strength to the entire door and helps prevent screen fabric damage. Molded plastic grille body measures 26-1/8 inch wide x 20 inches tall. The tabs extend 4-1/8 inches and can be easily trimmed.

The Segal Single Cylinder Deadlock is a trusted surface‑mounted security solution designed for homeowners who want dependable protection against forced entry. Constructed from solid high‑strength bronze alloy and finished in a corrosion‑resistant brushed chrome finish, this lock delivers long‑lasting durability with a classic appearance. Its time‑tested jimmy‑proof design helps prevent intruders from forcing entry by wedging or spreading the door frame, a common break‑in method. Featuring a strong cross‑bolt locking mechanism, this deadlock adds resistance against prying and physical attack at the door edge. Designed for use on wood, metal and resin doors and frames, the surface‑mounted installation allows for easy alignment and straightforward DIY installation using the included hardware. Each lock set comes complete with two keys and a flat keeper used for outswinging doors, providing everything needed for a secure and reliable door locking solution.

This top guide pin assembly features a 7/16 in. diameter nylon cap. It includes a black plastic retainer sleeve and coil spring. Used by Float Away steel framed doors.

This is a universal break-off link arm that makes it possible to adapt to whatever length link arm is needed when installing a louvre or jalousie operator. Made of cadmium plated steel, it has break-off points between holes every 1/2 in. This allows for a range from 1-13/16 in. to 5-5/16 in. in length. Any one of the lengths in between this range will be adequate for most situations.

This door pull plate is constructed from brass and comes finished in a polished brass finish. It features a removable PVC protective coating that provides protection to the plate’s surface during installation. These door pull plates are used to cover holes, protect the door’s surface and to provide a durable pull handle for commercial and residential swinging doors.

When your sliding door mortise lock is broken or old, don’t replace the door entirely, just get a new mortise lock! This E 2164 Mortise Lock has an adjustable, spring-loaded hook latch projection for surface-mounted sliding patio doors constructed of wood, aluminum and vinyl with handle sets with vertical keyway position when in the locked position. It also fits doors using W&F manufactured handles. The mounting hole centers of this lock measures 3-11/16 inch from center to center, and the rear housing corners are square. Selection Tip: To ensure the perfect match is selected prior to purchasing, the lock will need to be removed to compare the following 4 features (besides the width of housing): 1) The distance of the mounting holes measured from center to center, 2) The faceplate ends; rounded or square, 3) The position of the slotted keyway when in the locked position; at 45-degree angle or vertical, and 4) The shape of the housing corners at the rear; square or slanted. Installation Tip: Watch the manufacturer’s How-To Video that is linked to this item page.

This bottom pivot is constructed from steel. It features an adjustable design and features a 3/8 inch nylon base. This part is used by many wardrobe door manufacturers.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Thu May 29 2025

This is a guide rod used in Benchmark bi-fold door systems. The 5/16 inch diameter, 5-1/4 inch long steel rod and is threaded on the bottom half with a hex nut and washer. There is a 3/8 inch nylon cap on the end.

These rubber bumper tips replace worn, damaged and missing tips from restroom partition door stops and hangers. They are easy to install and are used by many.

These vintage style door knobs are constructed of steel and come in a beautiful finish. This set of knobs is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. This colonial style knob set fits 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. These knobs feature a wrought steel Colonial design, and they have a 2-1/4 inch outside diameter with a rope embossed design on their face. The knob shanks include setscrews for securing the knobs to the square spindle. All other components of matching vintage design must be purchased separately, to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: This item cannot be used on pre-bored doors that have large, newer style doorknob holes without first plugging them to receive this hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) knob holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

We have 100-year-old home and finding decent quality new door hardware is difficult, this was a good fit for our front door!. Kathleen. Hendersonville Nc, NC. Sat May 23 2026

This bi-fold door bottom pivot pin is constructed from steel. It features a black plastic retainer sleeve with a locking hex nut. This style pivot is used by Float Away steel framed doors.

This bottom track is constructed from roll-formed steel and comes finished in champagne gold. The track can be used for new installs, or to replace missing or damaged bottom tracks of by-passing mirror doors that use convex edge mirror door roller assemblies. They feature a double-grooved track as used by a variety of mirror door manufacturers, and can easily be cut for custom installs. These replacement tracks are sold individually and the installation fasteners are not included.

It was the correct size and fit beautifully. Wheel’s on the closet door slide beautifully on the track Price was great and I love Wayfair Thank you. Carol. Thu May 15 2025

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sun Feb 22 2026

This ADA compliant slide latch is constructed of stamped stainless steel and comes in a satin finish. It is a surface-mounted latch that is designed for use on 1 in. thick swing-in partition doors, and it comes complete with an "occupied" indicator and a matching stainless steel keeper. The exterior indicator has a dial-type internal mechanism that announces a locked door (or an occupied stall) with red color when the lock is engaged. When the slide lock is in the unlocked position, the dial indicator reveals a green color, or unoccupied state, announcing its availability for use. For access to the locked stall, the exterior indicator also comes equipped with a stainless steel pull and a slotted barrel nut which can disengage the lock from the exterior in the event of an emergency. This latch mounts over a durable, black plastic base with its mounting holes spaced apart at 1-3/8 inches, and it features a 1-3/16 in. bolt throw. This lock includes a stainless steel set screw and steel Allen wrench required for installation. Toilet partition slide latches like these are used by many and they are easy to install.

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.