Bi Fold Door Bottom Pivot 14 In Pin X 716 In Base Steel 2 Pack Primeline Mp6546

This surface mount door hinge set has all metal inserts right-hand in and left-hand out is for use on right-hand inswing and left-hand outswinging doors. They are self-closing. The hinges are constructed of satin cast stainless steel. The package includes the 2 top and 1 bottom hinges and the mounting screws. Hole spacing right to left 2-5/16 in. up and down 1-1/2 in., overall 3-1/4 in. x 3-1/8 in. Also known as a gravity surface hinge set.

This bi-fold closet track kit is constructed of steel, and the track comes in a white-painted finish. This kit includes one track and two track sockets, as needed for hanging two double-door bi-fold panels. This replacement hardware is designed for use with bi-fold panels that weigh no more than 30 lbs. each. The track is pre-cut down to 29-3/4 in. to minimize the need for cutting, and to simplify the installation process. Use this kit to enhance the beauty of a closet with bi-folding doors that fold open, and to obtain access to the full width of the closet opening. Note: Bi-folding door panels sold separately by other.

It’s been great for putting my door back on the hinge.. Mindy. US. Sun Oct 05 2025

Do you need to replace the door hinges from the house into the garage? Start with this pack of commercial spring hinges. Spring hinges are also known as spring loaded hinges or door closing hinges.  In new construction they are now required in many states to install on the door leading into your garage. The adjustable tension spring in the hinge automatically closes the door helping to minimize any harmful gas fumes from getting into your home or office. This pack can be used on a single door. The spring tension can be adjusted for a stronger or weaker closing power to ensure your door from your home to the garage area is closed securely. Order your pack today and replace the worn out hinges you have.

This Bi-Fold Door bottom pivot by Prime-Line Products is constructed of both steel and plastic components. The steel bolt comes in a corrosion-resistant, zinc-plated finish. This bi-fold door pivot features a bottom mount design with a hex head bolt for quick vertical adjustment, and it fits on 1-inch to 1-3/8 in. thick bi-fold doors, whose weight does not exceed up to 30lbs. each. Installation of these pivots requires only a 3/8 in. diameter hole beneath the vertical stile of the bi-fold door.

David. US. Sat May 10 2025

Do you need to replace the door hinges from the house into the garage? Start with this pack of commercial spring hinges. Spring hinges are also known as spring loaded hinges or door closing hinges.  In new construction they are now required in many states to install on the door leading into your garage. The adjustable tension spring in the hinge automatically closes the door helping to minimize any harmful gas fumes from getting into your home or office. This pack can be used on a single door. The spring tension can be adjusted for a stronger or weaker closing power to ensure your door from your home to the garage area is closed securely. Order your pack today and replace the worn out hinges you have.

Ronda. Riverside, CA. Mon May 06 2024

This is a stamped steel top pivot bracket. It fits into the Acme 5/8 inch wide track. The bracket is inserted into the track and as the screw is tightened, it forces the bracket against the lip running the length of both sides of the track. It is adjustable by moving it back or forth to the best position. Used with the Acme top pivot Prime-Line part N 6672.

Diana. US. Fri Aug 16 2024

Do you need to, or want to replace your door hinges? This set of 3 hinges offers dependable functionality and allows for smooth, effortless and quiet operation. They are perfect for any room in your home. Constructed from high gauge steel that installs right the first time and will stand up to the elements. Enhance the beauty of your home and keep the durable funcitonality. One pack will replace the hinges for 1 exterior door up to 6 foot 8 inches tall (most common door height). 1 inch flat head screws are included for a quick and simple installation. For best results use a hand held screwdriver to avoid stripping the screw head. To do a new installation a hammer and chisel may be required for mortising. Get your pack today and enhance the beauty of your home.

This top mount door insert is constructed of zinc alloy (cast Zamak) and it is unplated. This item fits on partition door panels that have round edges and measure 1 in. thick. This hardware is designed for use with partition hardware manufactured by Flush Metals.

For over 90 years, Colonial Bronze has produced the finest cabinet and architectural hardware available. Unlike their competitors, we don’t import finished hardware from Asian countries, we never allow anyone else to be responsible for the quality that bears the Colonial Bronze name. We control every aspect of their production and the level of quality that goes into their products. When you order hardware from Colonial Bronze, American craftsmen, and women will do their best to deliver the finest products you can find anywhere.

This bi-fold door guide is constructed from stamped steel and includes a nylon cap. It features a bottom mount design and is used to keep your bi-folding doors aligned. This style guide is used on Roberts and other similar styled bi-folding doors.

This bi-fold closet door track kit is constructed of various materials, including a roll-formed track that comes in a white-painted finish. This kit provides all necessary hardware for hanging one bi-folding (2-door) panel system. The hardware can be used with individual door panels that have a maximum weight of 30 pounds each. The top-mount track measures 35-3/4 inch for easy installation into 48-inch Wide closet openings. This is a factory-cut length to help simplify the installation process. This kit features three non-mortise hinges that mount to the jamb surface and over the vertical door stiles. Mortising into wood is not required. Use this hardware kit to enhance the beauty of a closet with bi-folding doors that fold open, in place of a single hinged-swinging door. Note: Bi-fold door panels are not included, but are sold separately by others.

A pair of door hinges made from solid metal with finish. The hinge features countersunk screw holes, is signed with the B+P insignia, and is designed to complement Buster + Punch door hardware. Suitable for residential doors.

This is a self-closing gate spring. The tension is adjustable with the use of an adjustable wrench. Make sure not to over-tighten the tension on the spring to cause it to break, if your gate is still not closing to your standards you may need a second spring. All the necessary mounting hardware is included for your installation. A phillips head screwdriver will be required for the installation.

This bottom pivot is constructed from steel. It features an adjustable design and features a 3/8 inch nylon base. This part is used by many wardrobe door manufacturers.

This bi-fold closet track kit is constructed of various materials, and the track comes in a -painted finish. This kit includes all the hardware necessary for hanging two double-door bi-fold panels, with each individual panel weighing no more than 30 pounds each. The track is pre-cut down to to minimize the need for cutting, and to simplify the installation process. This kit features non-mortise hinges that mount to the jamb surfaces and vertical door stiles. Use this kit to enhance the beauty of a closet with bi-folding doors that fold open, and to gain access to the full width of the closet opening. Unlike by-passing closet doors that only allow access to half of a closet, this bi-folding door hardware will allow for full access of closet. Note: Bi-folding door panels sold separately by other.

Help ensure doors close securely and automatically with this commercial grade adjustable self-closing spring hinge set. Designed for residential, commercial, and light industrial applications, these spring-loaded hinges are commonly used on doors between homes and garages, as well as on office, retail, apartment, and commercial entry doors where automatic closing is required. The built-in spring mechanism helps minimize the transfer of air, fumes, smoke, and noise by encouraging doors to return to the closed position after each use. Constructed from high-gauge steel with a durable satin nickel finish, these hinges are engineered for long-lasting strength and dependable everyday performance. Each hinge measures four and one half inches by four and one half inches and features square corners with four mounting holes per leaf for secure attachment. The satin nickel finish complements a wide variety of residential and commercial door hardware while providing a clean, professional appearance. The adjustable spring tension allows users to increase or decrease closing force to match the weight of the door and desired closing speed. This three-pack provides the hinges typically needed for a single door installation and includes all required mounting screws for a straightforward replacement or new construction project. Ideal for homeowners, contractors, builders, and facility managers, these self-closing hinges deliver reliable operation, code-compliant functionality where required, and long-term durability. Backed by a lifetime warranty, they provide a dependable solution for maintaining safe and properly closing doors.

This Bi-Fold Door Bottom Pivot Bracket is constructed from steel. It features an adjustable nylon bushing and a bottom mount design. This style bracket is used with Johnson Hardware.

This bottom hinge kit includes components constructed of various materials, and the main hinge bracket comes in a chrome-plated finish. The post-mounted gravity pivot hinge bracket fits on 1 in. thick posts and panels that have square cut edges. This bracket also features a 1-9/32 in. key dimension, and its pintle has an outside diameter of 1/2 in. This hardware is designed for use with partition hardware by General Applications.

This Bi-Fold Door bottom pivot bracket by Prime-Line Products is constructed from steel and nylon components, and it comes in a corrosion-resistant, zinc-plated finish. The bracket easily mounts onto the finished flooring beneath where your bi-fold door will be installed, and it accepts a 5/16 in. diameter pivot bolt head. This bracket is used by many manufacturers, and they are easy to install with a few simple tools. It also includes a self lubricating nylon bushing. For doors that are 1 in. to 1-3/8 in. thick. Fits Acme doors.

Great products and excellent service and delivery as promised!. Anonymous. Tue May 05 2026

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Tue Jun 24 2025

Double acting spring hinges are designed for doors that swing in both directions, like a traditional saloon door from the old west. Installing these hinges could make for a unique entry to certain areas throughout your home. Three of these double acting spring hinges are able to support up to 75 pounds of weight. All of the necessary mounting hardware is included for a hassle-free installation. Stone Harbor Hardware products are manufactured with durable materials to create a long-lasting and high-quality product that matches other Stone Harbor Hardware items of the same finish. Check out the rest of Stone Harbor Hardware’s items to explore more hardware solutions for your home.

Do you need to replace the door hinges from the house into the garage? Start with this pack of commercial spring hinges. Spring hinges are also known as spring loaded hinges or door closing hinges.  In new construction they are now required in many states to install on the door leading into your garage. The adjustable tension spring in the hinge automatically closes the door helping to minimize any harmful gas fumes from getting into your home or office. This pack can be used on a single door. The spring tension can be adjusted for a stronger or weaker closing power to ensure your door from your home to the garage area is closed securely. Order your pack today and replace the worn out hinges you have.

These hinges are great! We put 2 on our front door because one of our dogs can open the door to come in but he never closes it. LOL The 2 hinges closes the door completely. Problem solved.. Patricia Lyn. Mason, IL. Sun Sep 07 2025

This Bi-Fold Door top or bottom pivot bracket by Prime-Line Products is constructed from stamped steel and it comes in a corrosion-resistant, zinc-plated finish. The bracket easily mounts into the top or bottom bi-fold door track, and it used by many manufacturers. These pivot brackets are easy to install with a few simple tools. It fits into a top or bottom track and helps to reduce binding at the pivot. Used on metal bi-folding doors.

Deltana is an architectural hardware manufacturer with a proven record for exceptional service and quality. Deltana inventories America's largest selection of architectural and door hardware in over nine fine finishes made from solid brass, zinc, aluminum, steel, and stainless steel. The Double Action Spring Hinge is a floor-mounted self-closing hinge with solid brass cover plates and trim. It swings in both directions and has a hold-open feature at approximately 90 degrees.

This works great but does require some extra care and skill on the installation. Totally something that a carpentry / trim person can do, but depending on a personal skill set might not be a DYI item.. Toni. CA. Wed Apr 15 2026

This top pivot hinge is constructed from zinc alloy and comes in a chrome-plated finish. It is for 1-1/4 in. posts. This top pivot hinge replaces flush metal top hinges.

This bracket is constructed from stamped steel and comes plated in zinc. The bracket easily installs into the top track of your bi-fold door and accepts a 7/16 in. diameter pivot cap. This style bracket is best used with steel folding panel doors.

This door aligner is constructed from steel and plated in a zinc finish. It is used in openings that are not entered from both sides. The universal design easily mounts to the back of your lead doors to keep them tightly closed.

Do you need to, or want to replace your door hinges? This set of 3 hinges offers dependable functionality and allows for smooth, effortless and quiet operation. They are perfect for any room in your home. Constructed from high gauge steel that installs right the first time and will stand up to the elements. Enhance the beauty of your home and keep the durable funcitonality. One pack will replace the hinges for 1 exterior door up to 6 foot 8 inches tall (most common door height). 1 inch flat head screws are included for a quick and simple installation. For best results use a hand held screwdriver to avoid stripping the screw head. To do a new installation a hammer and chisel may be required for mortising. Get your pack today and enhance the beauty of your home.