Asa Commercial Stainless Steel Strike Plate Primeline U 9483

Solar powered: Bell+howell fence solar lights’ solar panel can only take about 4-5 hours to fully charge and can work about 10-12 hours at night. Don't worry about turning lights on and off. the solar fence light will turn on automatically at dusk and turn off at dawn.

Good amount of light. Anita Sue. US. Sun May 04 2025

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Viren. Tustin, CA. Sat May 11 2024

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

3/8 in

This is a shower door bottom seal that is constructed of clear vinyl and comes in 36 in. lengths. Designed to attach to the bottom of frameless, swinging shower doors without the need of adhesives. Cutting down to size will be necessary if your shower door measures less than 36 in. in width. No tools are required to install this shower door bottom. For an alternate design, please review the Prime-Line.

what I needed, Solved my problem, I need receipts for the items that I purchased where can I go on line to print them out Thank You. Daniel. Martinez, CA. Sat Feb 21 2026

This is a maximum security deadbolt strike that is constructed of stamped steel and it comes in a matte black finish. Designed to replace a standard strike plate for maximum security. Installation of this strike strengthens a locked door with six, 3 in. long screws that attach to the jack/trimmer stud to help prevent kick-ins. Some mortising and pilot hole drilling may be required for flush install. All the necessary mounting hardware is included for a quick and easy installation.

Bronze

Add an extra layer of security to your home with this Defender Security Door Reinforcement Lock. Designed to withstand 800 lbs. of force, you can rest easy knowing your family is safe and protected! This reinforcement lock has a spring-loaded design, aluminum construction and a bronze anodized finish. This reinforcement lock can be quickly and easily installed on any swing-in door of any thickness, and can help ensure the door cannot be opened from the outside by being kicked inch Additionally, it’s tamper-resistant, so it can protect against lock picking and bumping. Plus, it’s child-safe, because you can install it higher on a door, where your young ones can’t reach. Length is 2 to 0.19 inch. Width is 1 to 0.38 inch. Installation takes minutes, and this door reinforcement lock comes with 3 inch hardened screws. Extra home security and peace of mind are well within reach, and doesn’t have to come with the high price tag of an alarm system! Be sure to view the manufacturer’s How-To Installation Video also linked to this page, in the upper left-hand corner.

I'm happy I bought this. Additional security and stylish.. Veronica. Fort Worth, TX. Fri May 22 2026

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This Prime-Line J 4636 Door Push is designed for use on any swinging door to help prevent scuff marks or other damage. Installation of this swinging door protector is quick and easy with the included hardware and pre-drilled mounting holes. Constructed from stainless steel with a removable PVC protective coating, this push plate has a stainless steel finish. This door protection plate measures 8 inch by 16 inch and is designed for use on 18 inch doors. For further dimensional information, please see the line drawing and compare with your needs before purchasing.

These extended lip latch strikes are constructed of solid brass and come in a polished brass finish. They feature an adjustable tab designed to eliminate the door slop and chatter of closed doors, and they’re installed with two #8 x 1 in. fasteners included with each package. These latch strikes are used by many on wide jambs with decorative molding. Adjustment tip: to eliminate the loose rattling of a closed door, remove the strike plate and bend the tab slightly with a pair of pliers, adjusting left to right as necessary.

I was glad to find this extra length strike plate at your site, because I couldn't find anything like it in hardware stores, was about to make one out of brass myself.. Anonymous. Thu Aug 17 2023

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Fri Feb 13 2026

This deadbolt strike is constructed of heavy gauge stamped steel and comes in a satin nickel plated finish. It features a 3/4 in. x 1-1/16 in. opening that fits most entry door deadbolt hardware. Four 3 in. screws are provided with each plate to allow for a stronger hold, deep into the wall stud beneath the jamb. Use this strike and fasteners to help reinforce the most vulnerable area of entry door systems.

Black, 34" H x 8" W x 1" D

Our ADA kick plate is ideal for commercial door applications where a decorative accent is added. This model helps you to protect the door surface in high traffic areas. Furthermore, it's designed to withstand heavier foot traffic. Our kick plates are extremely easy to install and easily cleaned for a polished look. Items are available in three finishes to match the rest of your door hardware: Aluminum, Black, Bright Brass and Stainless Steel.

Good quality.. Jennifer. Sat May 30 2026

This Security ASA Adjustable Door Strike by Prime-Line Products is constructed of steel and it comes in a brass-plated finish. It is ideal for use on wood or metal door jambs. Constructed of solid steel, the strike plate features a polished brass finish and comes with combo screws for simple installation. Meets ANSI A156.2 Used on wood or metal jambs with most grade 1 locksets. For best results, follow the installation instructions included with each package. These strikes are easy to replace using only a few simple tools. For further dimensional information, please see the line drawing.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Copper, 6.55" H x 5.35" W x 2.45" D

This is a solid brass door reinforcer in a classic bronze finish. Helps prevent a forced entry. Typically used on wood or metal doors that are 1-3/8 in. thick with mortise or drive-in latches. Accommodates key-in knob locksets or deadbolts, or combination locksets. It features one 2-1/8 in. bore with a 2-3/8 in. backset.

Secure and restore your door hardware with the Prime-Line E 2299 Standard T-Strike Door Latch Strike. Designed for versatility, this latch strike functions as both a reliable replacement for worn components and a secondary locking option for sliding screen doors. Compatible with both wood and metal jambs, it provides a flexible solution for a wide range of residential applications. Constructed from solid brass with a durable stainless steel-plated finish, this strike plate delivers long-lasting performance while maintaining a classic, traditional appearance. The latch guard cover is engineered to work with most Grade 2 locksets and meets ANSI A156.2 standards, ensuring dependable functionality and compatibility with common door hardware systems. Installation is quick and straightforward with all necessary mounting hardware included, making it ideal for DIY repairs or upgrades. Measuring 1-1/8 inch by 2-3/4 inch with 2-1/8 inch on-center mounting holes, this strike plate is designed for precise fit and easy replacement. Perfect for maintenance, repair, or security upgrades, this Prime-Line latch strike combines durability, ease of use, and trusted performance. Always review dimensions to confirm compatibility before purchasing.

9.75" H x 5.2" W x 2.45" D, Antique Brass

Upgrade your door security with this antique brass lock and door reinforcer, designed to help prevent forced entry by strengthening the vulnerable area around your lock. Perfect for repairing or reinforcing both metal and wood doors, this plate fits 1-3/4-inch thick doors with mortise or drive-in latches. Crafted from durable solid brass or stainless steel with an elegant antique brass finish, it features two 2-1/8-inch bores spaced 3-5/8 inches apart and offers backset options of 2-3/8 inches or 2-3/4 inches. The non-recessed plate comes pre-punched for easy installation, and all necessary mounting hardware is included. Please review the line art drawing for exact measurements before purchasing, as this item is not universal.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

Debra. New Braunfels, TX. Thu Jun 04 2026

These shower door bottom guides are constructed of plastic and come clear in color. The channels feature . wide openings that will allow for use with up to 3/16 in. thick frameless glass panels. Use of these glue-in bottom-mount guides will help keep hanging glass panels aligned in their respective tracks. They are easy to install and are used by a variety of tub and shower door manufacturers.

Great replacement. Anonymous. Mon Sep 22 2025

Nickel

Enhance door security with this premium hotel door blocker, a trusted solution in the hospitality industry and beyond. Designed for in-swinging doors, this secondary lock prevents forced entry from the outside while allowing the door to open slightly for safe visitor identification. Commonly installed in hotels, motels, and commercial properties, it’s also ideal for homes, rentals, and offices seeking added security. Unlike traditional flip latches or chain locks, this blocker minimizes damage caused by slamming doors, preserving both door frames and hardware. Its durable satin chrome-plated finish delivers a professional, modern look that blends seamlessly with most décor styles. Easy to install with the included mounting hardware, this door blocker provides an effective upgrade to standard door locks without requiring specialized tools. Durable, stylish, and functional, it offers peace of mind for property owners and occupants alike.

Was my mistake. This item is not good for my door, but I give this item to my friend they can use it for there door.. Zoila. Jackson Heights, NY. Mon Mar 31 2025

These shower Door bottom seals by Prime-Line Products are constructed of vinyl and come clear in color. They feature water-deflecting flaps that extend 5/16 in. beyond the frameless glass shower door bottoms. These seals mount onto the bottoms of 3/8 in. thick frameless glass shower doors, and fit glass panels that measure up to 36 in. wide. These are slip-on-fit seals and no adhesive is necessary. These seals are used by many shower door manufacturers.

The product seemed good. Unfortunately it didn’t fit our shower because the sweep was too big compared to the space between the bottom of door and base.. Lori. London Canada. Mon Jun 15 2026

This Security ASA Adjustable Door Strike by Prime-Line Products is constructed of solid brass and it is ideal for use on wood or metal door jambs. Constructed of solid brass, the strike plate features a polished finish and comes with combo screws for simple installation. Meets ANSI A156.2 Used on wood or metal jambs with most grade 1 locksets. For best results, follow the installation instructions included with each package. These strikes are easy to replace using only a few simple tools. For further dimensional information, please see the line drawing.

Works great would reccomend. Edythe. Houston, TX. Fri Jan 16 2026

This is a white plastic roller assembly. The roller is made of brass flat edge and is most often used by Elco, Better- Bilt Aluminum, and a variety of other manufacturers.

This is a heavy-duty pivot hinge set, is satin stamped stainless steel, used on Phenolic and Solid Plastic restroom dividers. The hinges are designed for 3/4 inch to 1 inch thick doors and 3/4 inch 1 inch thick pilaster posts. They use this style of hinge due to the incredible strength they have, for the heavy solid plastic doors. Also known as a bathroom stall roller-bearing hinge set. Fasteners are included.

Received quickly and able to make rapid repairs as needed. Evan Reif . Wpb, FL. Mon Jun 23 2025

This door strike reinforcing kit by prime-line products is constructed of solid brass and comes in a beautiful, corrosion-resistant, classic bronze finish. This two-piece security strike kit allows for hole center flexibility in securing combination deadbolt and entry lock installation, as the two can be separate from one another as determined by existing door locking hardware. The deadbolt and entry lock strikes included in this kit replace most strikes and improves security with 3 in. Long screws are attached to the wall stud.

This is a casement operator track that is riveted or screwed onto the bottom of a steel casement window. It fits the older style casement operators Prime–Line parts H 3500 through H 3523, and H 3581 through H 3588. The guide disc on the tip of the operator glides through the track to open or close the window.

Secure and restore your door hardware with the Prime-Line E 2568 Standard T-Strike Door Latch Strike. Designed for versatility, this latch strike functions as both a reliable replacement for worn components and a secondary locking option for sliding screen doors. Compatible with both wood and metal jambs, it provides a flexible solution for a wide range of residential applications. Constructed from solid brass with a durable bronze-plated finish, this strike plate delivers long-lasting performance while maintaining a classic, traditional appearance. The latch guard cover is engineered to work with most Grade 2 locksets and meets ANSI A156.2 standards, ensuring dependable functionality and compatibility with common door hardware systems. Installation is quick and straightforward with all necessary mounting hardware included, making it ideal for DIY repairs or upgrades. Measuring 1-1/8 inch by 2-3/4 inch with 2-1/8 inch on-center mounting holes, this strike plate is designed for precise fit and easy replacement. Perfect for maintenance, repair, or security upgrades, this Prime-Line latch strike combines durability, ease of use, and trusted performance. Always review dimensions to confirm compatibility before purchasing.

Satin Nickel

This kick plate is constructed from aluminum and it features a removable PVC protective coating. This kick plate will provide full coverage on 36 in. wide doors. Custom sizes of this finish are available for special order. These door kick plates are used to protect the lower part of doors from scuff marks and damage by carts.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Brass, 8 in. x 34 in.

Brite brass on aluminum door kick plate, 8 x 34 inch Made of non-ferrous base metals with a removable PVC protective film on most plates. 0.032 gauge aluminum construction.

Beautiful color and great quality. Order arrived promptly and packaged well.. Anonymous. Fri May 01 2026

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

It does the job. It is kind of heavy, but it is effective.. Tiffany. Cocoa, FL. Wed May 28 2025

These door latch strike plates are constructed of stamped steel and come in a stainless steel finish. They feature an adjustable tab to allow for best engagement of the door latch, and they are used to replace most interior and exterior residential latch strikes. This item includes fasteners and 2 strike plates per package. These plates measure 1-7/16 inch wide x 2-1/4 inch tall and have mounting holes 1-5/8 inch on center.

This Door Strike Reinforcing Kit by Prime-Line Products is constructed of solid brass and comes in a beautiful, corrosion-resistant, polished brass finish. This two-piece security strike kit allows for hole center flexibility in securing combination deadbolt and entry lock installation, as the two can be separate from one another as determined by existing door locking hardware. The deadbolt and entry lock strikes included in this kit replace most strikes and improve security with 3 in. long screws attached to wall stud.

11" H x 4" W x 1.25" D, Satin Nickel

This is a maximum security combo strike that fits 5-1/2 in. and 6 in. hole spacing's on center dead latch and deadbolt. Uses six 3 in. screws that install on the vertical side of the strike closest to the stop molding. These 3 in. screws allow for a strong hold as they drive into the jack stud to help prevent kick-ins. Three #8 x 3/4 in. screws install on the side of the strike closest to the door.

Satin Nickel

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

Beautiful and classy.. Linda. NY. Mon Aug 11 2025

These rivets are constructed of aluminum and come in a milled aluminum finish. They are corrosion and rust-resistant rivets that can be used in the harshest of weather conditions. These rivets feature hollow tips to allow for easy flaring for fastening different parts and components. These rivets in particular are used to install sash guides onto the channel balances of vinyl liners, as used in single hung and double hung vertical sliding windows. Using only a few simple tools, these rivets are easy to install.

Satin Chrome

Super easily installation and works great!. Anonymous. Fri May 01 2026

This door and jamb reinforcement kit is constructed from steel and comes in a white powder coated finish. It is used to repair and reinforce a standard door jamb. This kit includes the reinforcement plate and fasteners to secure it to the door jamb.

This double cylinder deadlock is constructed of diecast and it comes in a chrome plated finish. It features a jimmy-resistant design which prohibits forced entry when attempts are made to spread the door away from the frame.

Beautiful. Would be better if all the screws were long. You get 2-1” screws and 1- 3”screw. It’s also a little pricey compared to the black and silver. It would be nice if they’d make a satin gold instead of the shiner old fashion gold.. Angela. Fort Worth, TX. Wed Jan 11 2023

Matte Black

Quickly and easily replace your existing strike plates with one from Stone Harbor Hardware that feature beautiful, non-flaking finishes to match any decor. The size of the lip strike is the distance from the center of the mounting holes to the edge of the lip while the overall width of the lip strike is slightly larger. For example, a strike plate with a listed size of 3 inches will have an overall width of about 3.5 inches. All of the necessary mounting hardware is included for a hassle-free installation. Stone Harbor Hardware products are manufactured with durable materials to create a long-lasting and high-quality product that matches other Stone Harbor Hardware items of the same finish.

Just the right size and color I needed. I was unable to find it in the major home improvement stores or their online website.. Anonymous. Wed Mar 11 2026

This Deadbolt Strike is constructed of heavy gauge steel and it comes in a brass-plated finish. This heavy duty deadbolt strike replaces most deadbolt strikes and increases security with the 3-inch screws included within each pack. Use of long fasteners allow the deadbolt strike plate to fasten deep into the wall stud beneath the thin 3/4 inch door jamb. The plate can be used with most entry door applications.

Matte Black

Quickly and easily replace your existing extended lip strike plate with one from Stone Harbor Hardware that features beautiful, non-flaking finishes to match any decor. This hardware measures 2-1/4 inches tall, 4-1/2 inches wide, and 1/16 inches thick. The screw holes on the strike measure 1-5/8 inches from center-to-center. The size of our extended lip strikes are listed by the distance from the center of the screw holes to the edge of the lip. The overall width of these strikes is always larger than the listed strike width within the product name. For example, this strike plate features a listed width of 4 inches but has an overall width of 4-1/2 inches. All of the necessary mounting hardware is included for a hassle-free installation. Stone Harbor Hardware products are manufactured with durable materials to create a long-lasting and high-quality product that matches other Stone Harbor Hardware items of the same finish. Check out the rest of Stone Harbor Hardware’s items to explore more hardware solutions for your home.

Really nice but came with a scratch. Sabrina. Etobicoke, ON. Mon Nov 17 2025

The Sentry restroom stall door privacy cover is designed to increase privacy in public restrooms by covering large gaps between partition walls and doors. It's made of a soft, black opaque vinyl strip and a transparent, rigid vinyl strip. The clear vinyl base features a strong-holding adhesive backing for quick and easy installation, with no fasteners required. The flexible, black, opaque strip obscures vision and eliminates gaps in doors and panels. This restroom privacy cover easily blends to fit all partition colors and materials. It is also easy to cut to your desired length to fit your unique application. For custom, tight-fitting installation around the door hinge and latch hardware, try using a coping saw or a pair of tin snips for cutting and trimming. There are two strips included in a pack (set), each measuring 2-1/8 inch width x 58 inch height. One pack (set) is ideal for covering both the left and right sides of one public restroom stall door.

0.9" H x 1.5" W x 0.8" D

These ball bullet catch and strikes are constructed of solid brass and steel components. Each catch features fully adjustable barrels, and they install on the top edges of hinged-swinging doors, or on their vertical edges. These ball catches help keep doors closed without the need for standard turn knobs or levers, allowing doors to easily pull open and push closed. These ball catches are for use with hinged-swinging doors, commonly used on closet doors, pantry doors, kid's room, etc. They are easy to install and are used by many.

Good quality. They work nicely on the doors they were installed on.. Joseph. Washington, Dc. Mon Feb 23 2026

This deadbolt strike plate is constructed of stamped stainless steel and comes in a satin finish. It features an 1/8 in. thick, heavy gauge stainless steel base which allows for 3 in. screws to be anchored into the wall stud. This two-piece high security deadbolt strike replaces standard exterior residential deadbolt strikes adding increased security to entry doors. This item includes one two-piece strike plate per package with fasteners. Pilot holes for 3 in. screw installation, and additional, deeper chiseling may be required flush install.

Rose Gold, 5.4" H x 3.7" W x 0.55" D

These strike plates are constructed of stamped steel and come in a plated finish. They feature an adjustable depth to allow for snug-fit adjustments of door to jamb latching. Using strikes like these help eliminate rattling of doors when loose fitting latch engagements are present. Can be used on both residential and commercial frames such as Roberts Redi-Frame and Timely metal frames. All the necessary mounting hardware is included for a quick and easy installation.

This blank reinforcer is constructed from stainless steel. It covers unsightly holes and damage. This type of blank reinforcer can be drilled to accommodate specialty locks and is used on 1-3/4 in. thick doors.