9 In Bronze Left Hand Casement Operator Primeline Th 23014

By Prime-Line

This is a casement operator track that is riveted or screwed onto the bottom of a steel casement window. It fits the older style casement operators Prime–Line parts H 3500 through H 3523, and H 3581 through H 3588. The guide disc on the tip of the operator glides through the track to open or close the window.

By Prime-Line

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

By Prime-Line

This is a bronze finish left-handed, 9-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on a bronze finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90 degrees. The plastic roller on the end of the steel arm insure a smooth operation as it slides through the Prime-Line part TH 22397 track. When installing, the housing easily fastens down to the window sill.

By Prime-Line

This is a white finish left-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on white finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90 degrees. The plastic roller on the end of the arm insure a smooth operation as it slides through the Prime-Line part TH 22397 track. When installing, the housing easily fastens down to the window sill.

By Prime-Line

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

By Prime-Line

Bronze

This is a left-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has an attractive finish with mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

By Prime-Line

This Prime-Line H 3522 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

This Prime-Line H 3523 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

Bronze, 13.25" H x 3.88" W x 1.38" D

This Prime-Line H 3501 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3502 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3505 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3708 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

9-1/2 Inch

This Prime-Line H 3571 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

EXACTLY what I needed and works like new.. Anonymous. Thu Oct 03 2024

By Prime-Line

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

By Prime-Line

Classic Bronze

These vintage style door levers are constructed of diecast and come in a beautiful finish. They feature a heavy weighted casting design and unique Silencer bushings for smooth operation. This set of levers is designed for indoor use only, and it includes one 2-3/4 inch steel spindle, and one 3-5/8 inch steel spindle with 3/8 inch-20 threads. These French style levers fit 1/4 inch square drive spindle systems commonly found in antique and vintage door hardware sets, and with the two (2) provided square spindles, it can adjust to accommodate doors of different thicknesses. The lever shanks include setscrews for fastening to the square spindles. All other components of matching vintage design must be purchased separately to include the internal mortise lock body, the door rosettes, the trim and strike plates, or the latch and fasteners. Note: These levers cannot be used on pre-bored doors that have large, newer style doorknob holes without first prepping them to receive this older-style hardware. Installation tip: Because the fasteners of the rosettes (purchased separately) require a solid surface to mount to, the large 2-1/8 inch (approximate size) holes must first be filled with a hardening filler, to then be able to receive the rosette fasteners. Products like Fix-It-All and Bondo Body Filler have worked well for some, but care must be used to avoid damaging any prefinished door surfaces during application and finishing.

Just wish it was for exterior use…..needed a handle with a short spindle….using it for interior handle of storm door….works great!. Will. Savannah, GA. Tue Jul 09 2024

By Prime-Line

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

By Prime-Line

This is a right-handed casement locking handle made of heavy cast white bronze with a polished finish. It has mounting holes 1-3/8 in. on the center. Used by a wide variety of commercial window manufacturers. For the left-handed version use Prime-Line part H 3602.

By Prime-Line

This casement operator is constructed of a diecast body, a hardened steel arm (with a steel guide button at 9/16 in. in diameter), and a case-hardened worm gear mechanism that comes in a corrosion-resistant plating. It features a square-shaped housing and an operator crank handle, and comes finished in a bronze colored baked-on enamel finish. This casement operator is right-handed, determined when viewing the window from the outside looking in. This operator is a surface-mounted crank-out design for casement windows and mounts with six fasteners. This high-end quality operator exhibits minimal gear lash, with positive and smooth operation. For the opposite handing of this operator, see Prime-Line part TH 23026-1. Installation fasteners and a set screw (for affixing the crank handle onto the operator spindle) are included with each operator. This operator provides a full 90-degree opening and disconnects easily from the sash. Use Prime-Line part TH 22397 for replacement track.

By Prime-Line

Bronze

This operator crank handle is constructed of diecast zinc and comes in a baked-on enamel finish, engineered to resist rust and corrosion. It is designed for use on Truth brand casement and awning window operators with 11/32 inch spindles. This window crank features a set screw at the base of the handle allowing it to lock onto the spindle, and a swivel knob at the tip for ease of operation. The reach on this crank measures 2-9/16 inch and it has a 3-1/2 inch projection. This operator crank handle is easy to install, and it’s used by a variety of window manufacturers.

By Prime-Line

8.4" H x 3.75" W x 0.95" D, White

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

By Prime-Line

Chrome

Has your sliding screen door handle broken, is it worn out, cracked, been damaged or just worn out? This right-handed sliding screen door latch and pull is constructed of diecast and it comes in a beautiful chrome plated finish. It is a surface-mounted latch and it features a side- or face-mountable keeper with installation fasteners for both. This patio sliding screen door latch can be used on both single-active panel and dual-active panel sliding screen doors. These sliding screen door latches are extremely versatile. Sliding screen door locks like these provide secure latching capabilities as a primary or secondary latch. Secures sliding screen door from accidentally opening by pets or other animals. Order yours today and make your sliding screen door secure again.

This was a good alternative to the latch I wanted that you had but was out of stock.. Kevin. Minneapolis, MN. Tue Feb 07 2023

By Prime-Line

This is a right-handed casement or projecting window locking handle. The heavy bronze casting has a 13/32 in. hole in the base that the screw and clevis fit into (see H 3658). the latch part stands 3/32 in. from the surface it comes in contact with. This is used on Old Style Fenestra Windows. For other similar styles for Fenestra see the related items. For left-hand see Prime-Line part H 3649.

By Prime-Line

This is a casement crank handle is aluminum diecast and has a 5/168 inch bore spindle. This fits any operator with a 3/8 inch bore spindle such as the teardrop style casement operators (Prime-Line parts H 3502 and H 3508). It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 2-11/16 inch

By Prime-Line

This Prime-Line H 3949 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 13-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

By Prime-Line

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

By Prime-Line

13.1" H x 3.8" W x 1.45" D, Bronze

This Prime-Line H 3507 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3508 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3709 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

Bronze

This is a right-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

By Prime-Line

This is an older style of casement lock painted antique brass on zinc diecast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it be a swing in or swing out casement window. Installation screws are included. Besides being used on casement windows, it is often used on cupboards and cabinets for that Retro look.

By Prime-Line

This Prime-Line H 3863 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of white diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 9-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

By Prime-Line

Bronze

This is a right-handed single arm operator with a bronze finish. It is often found on older steel windows as well as other styles. On the end of the arm is a stainless steel guide roller that rolls in the Prime-Line part TH 22825 casement operator track. The hardened steel arms, worm drive and gears are protected with a corrosive resistant finish. The arm with insert into a slot in the window frame to engage the track. Mounting holes are 3.876 inch and 4.75 inch on center.

Good product. Ratanak. St-léonard, QC. Wed Aug 24 2022

By Prime-Line

This jalousie operator by Prime-Line Products is constructed of diecast materials and comes in an aluminum painted-finished. The mounting holes are spaced apart at 4-3/4 in. or 3-7/8 in. on center. It is a reversible non-handed design that can be used on either left-hand or right-handed installations. The link arm is 3-1/2 in. long (center to center), and it comes with a matching crank handle that fits the 5/16 in. spindle. Used by many manufacturers.

By Prime-Line

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

By Prime-Line

13.15" H x 3.8" W x 1.45" D

This Prime-Line H 3711 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3833 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

This Prime-Line H 4320 is an awning crank handle is white diecast and has a 11/32 inch bore spindle. This fits most awning operators with a 11/32 inch bore spindle such as the universal Prime-Line parts H 3554 or H 3555. It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 3-1/2 inch.

By Prime-Line

This Prime-Line H 3570 Left-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 13-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

Very easy to do the job of removing the old broken unit and installing the new one. The new unit came in on the day that they said it would. Will order more as needed.. Anonymous. Tue Sep 03 2024

By Prime-Line

This is a bronze casement operator that has been used on wood and vinyl windows for the last 35 years. It is left-handed as viewed from the inside looking out. The body is bronze diecast with a steel worm gear driving a 9-1/2 in. painted steel arm with a plastic guide button on the tip. The guide button glides through the track Prime-Line part H 3530. It contains one operator, 1 crank handle, and installation screws. For matching right-hand operator use Prime-Line part H 3569.

By Prime-Line

Bronze

This is a non-handed casement locking handle in an attractive finish with mounting holes 2-3/8 inch on center. This is a universal design and the handle is made of a diecast construction with the handle hanging straight down and used by a variety of aluminum and steel windows. The gap between the face plate and hook latch is 5/16 inch. In addition, there is a 3/16 inch security hole that allows and additional locking pin to be passed through the hole and lock in place with the 1/8 inch Prime-Line part S 4071 security pin (sold separately).

By Prime-Line

This casement operator cover is constructed from high impact plastic and it comes white in color. It fits Pella casement operators and similar styled casement windows. This is a right-hand operator replacement cover for Pella casement windows, as determined (handing) by facing the window from the inside; looking out. For left-hand operators of the same style, see Prime-Line part H 4095.

By Prime-Line

This Prime-Line H 3516 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

By Prime-Line

This casement sash lock is constructed of diecast and comes in a white painted finish. It features 3 different strike plates for use with push-out and swing-in casement windows that are not operated with a standard crank-out operator. The steel rim strike (1 in. x 1-3/8 in.) and the diecast surface strike (1/2 in. x 2 in.) included with this item are used for swing-in casements commonly hung with steel butt hinges. The steel mortise strike (11/16 in. x 2-7/16 in.) is for use with push-out casements, also commonly hung with steel butt hinges. Some mortising may be required when installing the rim strike or mortise strike. All fasteners are included with lock hardware. These locks are used on old style wood casement windows.

By Prime-Line

19.2"H x 4.65" W x 1.4" D

This is a 10-3/4 in. right-handed dual arm operator with a 4-1/16 in. offset link arm. The long continuous arm and jointed arm create an action that pushes the sash open while pulling the hinge side of the sash to the open position. It is made of heavy-duty diecast zinc and protected with the corrosive resistant E-Gard coating process. Arm operator only, the operator base and crank handle are not included.

By Prime-Line

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Sat Feb 14 2026

By Prime-Line

This is a steel mortise latch assembly, with a 45 degree keyway. It features a diecast keeper and mounting housing, pocket design for wood, vinyl or aluminum doors with a zinc-plated finish. There is no adjusting of the hook lock on this model of mortise lock. The mounting holes are 3-9/16 in. on center, with a latch assembly that fits a 3/4 in. x 4-11/32 in. cut-out.

Nice. Anonymous. Thu Dec 12 2024

By Prime-Line

Black

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

By Prime-Line

This is a universal casement lock keeper used for the most common casement locking handles. The two elongated mounting holes are 2-1/4 in. on the center, and allow it to be adjusted up or down to fit the installed locking handle. It is reversible and can be used for left-hand or right-hand casement lock handles.

By Prime-Line

This is an older style of casement lock painted satin nickel on zinc diecast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it be a swing in or swing out casement window. Installation screws are included. Besides being used on casement windows, it is often used on cupboards and cabinets for that Retro look.

By Prime-Line

The Prime-Line H 3558 jalousie operator is designed for use with a variety of jalousie windows, providing smooth and reliable functionality for both residential and commercial applications. This reversible operator features a non-handed design, allowing it to be installed on either left or right-handed windows for maximum versatility. Built to last, this diecast operator has a bronze finish, ensuring long-lasting performance and resistance to wear and tear. Comes with a matching t handle operator, three adjustable link arms, and all necessary mounting hardware. Installation requires only a Phillips head screwdriver for quick and simple setup. Mounting holes are spaced at 3-7/8 inch or 4-3/4 inch on center, with adjustable link arms for customized installation. For further dimensional information, please see the line drawing and compare with your needs before purchasing.

By Prime-Line

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

By Prime-Line

The Prime-Line F 2858 Cam Action Window Lock replaces or upgrades the sash lock on single and double hung vinyl windows. This small window latch is constructed from diecast and comes finished in classic bronze. Mounting hardware included. A Phillips head screwdriver is required for installation. The window latch replacement features a cam action hook which draws the classic bronze sash lock keeper tight when locked. The body of the prime-line window latch has anti-jimmy studs which engage the keeper of the window lock replacement. For further dimensional information, please see the line drawing.

I bought these to rejuvenate our décor. The color is perfect (black), but the overall quality was not as good as the ones I was taking out from two decade ago (no big surprise there, I guess). Quality is notoriously missing from many, many items here. Reason: made in China.. Alexander. CO. Fri Mar 03 2023

By Prime-Line

This is an older style of casement diecast lock painted with a bright brass finish. Used on older style wood swinging casement windows. It has three different keepers that allow for most mounting applications whether it be a swing in or swing out casement window. Installation screws are included. Besides being used on casement windows, it is often used on cupboards and cabinets for that retro look.