9 12 In Single Arm Left Hand Casement Operator Primeline Th 23023

By CounterArt

Perfect for prepping, carving or serving, this cutting board from CounterArt features a sturdy tempered glass body that is shatter-resistant and will prove to be a great counter saver. The hygienic, non-porous surface resists stains, scratches, and bacteria, while the colorful, artistic design brings a distinctive style to your kitchen or buffet table. Non-skid rubber feet on the back will hold the piece steady while protecting your countertop from scratches. Carve a roast, prep a salad, use it for happy hour entertaining, on the buffet table with wine and cheese or for crudites.

I have been looking for a decorative cutting board to match my toile kitchen for years. And I finally found the pattern that looks great on my countertop. It came wrapped beautiful, no damage, and I’m very very happy with it!. Anonymous. US. Mon Feb 14 2022

By Prime-Line

This is a bronze finish left-handed, 9-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on a bronze finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90 degrees. The plastic roller on the end of the steel arm insure a smooth operation as it slides through the Prime-Line part TH 22397 track. When installing, the housing easily fastens down to the window sill.

By Prime-Line

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

By Prime-Line

This is a white finish left-handed, 13-1/2 in. single arm operator. It is made of heavy-duty diecast zinc with the baked on white finish. The steel arm, worm drive and gears are protected with a corrosive resistant finish, and it opens to a full 90 degrees. The plastic roller on the end of the arm insure a smooth operation as it slides through the Prime-Line part TH 22397 track. When installing, the housing easily fastens down to the window sill.

By Prime-Line

This Prime-Line H 3522 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

This is a left-handed Dyad style casement operator (1-jointed arm). The high pressure diecast zinc operator base; steel arms, hardened steel worm drive and gears; as well as the stud bracket; are all protected with the corrosive resistant E-Gard coating process. Operator is designed for narrow style windows (minimum of 11 in. between the side stops). It is an excellent low-torque operator. The cover and crank handle are optional, depending on the color desired.

By Prime-Line

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

By Prime-Line

This Prime-Line H 3523 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

13.15" H x 3.85" W x 1.45" D, White

This Prime-Line H 3501 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3502 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3505 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3708 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

By Prime-Line

This casement operator is constructed of a diecast body, a hardened steel arm (with a steel guide button at 9/16 in. in diameter), and a case-hardened worm gear mechanism that comes in a corrosion-resistant plating. It features a square-shaped housing and an operator crank handle, and comes finished in a bronze colored baked-on enamel finish. This casement operator is right-handed, determined when viewing the window from the outside looking in. This operator is a surface-mounted crank-out design for casement windows and mounts with six fasteners. This high-end quality operator exhibits minimal gear lash, with positive and smooth operation. For the opposite handing of this operator, see Prime-Line part TH 23026-1. Installation fasteners and a set screw (for affixing the crank handle onto the operator spindle) are included with each operator. This operator provides a full 90-degree opening and disconnects easily from the sash. Use Prime-Line part TH 22397 for replacement track.

By Prime-Line

Aluminum, 13.25" H x 3.88" W x 1.38" D

This Prime-Line H 3507 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3508 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3709 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

This is a right-handed casement or projecting window locking handle. The heavy bronze casting has a 13/32 in. hole in the base that the screw and clevis fit into (see H 3658). the latch part stands 3/32 in. from the surface it comes in contact with. This is used on Old Style Fenestra Windows. For other similar styles for Fenestra see the related items. For left-hand see Prime-Line part H 3649.

By Prime-Line

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

By Prime-Line

13.25" H x 3.88" W x 1.38" D

This Prime-Line H 3711 casement operator is constructed of a diecast housing and crank handle, with a 9 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator. This Prime-Line H 3833 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the right side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By Prime-Line

8.4" H x 3.75" W x 0.95" D, White

Use this Prime-Line Pella Spline Socket Casement Window Handle with Pella casement operators that have 3/8 inch diameter special deep splines. It fits other, similar-styled casement operators with 3/8 inch special deep splines and features a long-reaching arm for optimal performance. This spline socket crank handle features a sleek, arching, and contoured design to enhance the beauty of your window and provide an elegant finish to Pella casement windows. Made of durable diecast construction for lasting use, the window handle crank comes in a painted finish. It is engineered to resist rust and corrosion. This crank is easy to install. Plus, it has a set screw at the base of the handle allowing it to lock onto the spindle. The casement window crank handle replacement features a sleek, arching design with a unique 3/8 inch bore that fits the Pella special deep spline spindles. It has a 2-3/8 inch drop from the base bottom to the center of knob. For further dimensional information, please see the line drawing (not universal).

By Prime-Line

This Prime-Line H 3864 Left-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for left-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of white diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 9-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

By Prime-Line

Bronze

This is a right-handed single arm operator with a bronze finish. It is often found on older steel windows as well as other styles. On the end of the arm is a stainless steel guide roller that rolls in the Prime-Line part TH 22825 casement operator track. The hardened steel arms, worm drive and gears are protected with a corrosive resistant finish. The arm with insert into a slot in the window frame to engage the track. Mounting holes are 3.876 inch and 4.75 inch on center.

Good product. Ratanak. St-léonard, QC. Wed Aug 24 2022

By Prime-Line

This is a bronze casement operator that has been used on wood and vinyl windows for the last 35 years. It is left-handed as viewed from the inside looking out. The body is bronze diecast with a steel worm gear driving a 9-1/2 in. painted steel arm with a plastic guide button on the tip. The guide button glides through the track Prime-Line part H 3530. It contains one operator, 1 crank handle, and installation screws. For matching right-hand operator use Prime-Line part H 3569.

By Prime-Line

This Prime-Line H 3570 Left-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 13-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

Very easy to do the job of removing the old broken unit and installing the new one. The new unit came in on the day that they said it would. Will order more as needed.. Anonymous. Tue Sep 03 2024

By Prime-Line

Aluminum

This is a right-handed diecast casement locking handle with an offset base found on many contemporary casement windows (as viewed for the inside looking out). The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge by 13/16 inch from the tip of the lock to the center of the mounting holes. This handle has mounting holes for the handle assembly and the keeper at 1-1/2 inch apart.

By Prime-Line

This jalousie operator by Prime-Line Products is constructed of diecast materials and comes in an aluminum painted-finished. The mounting holes are spaced apart at 4-3/4 in. or 3-7/8 in. on center. It is a reversible non-handed design that can be used on either left-hand or right-handed installations. The link arm is 3-1/2 in. long (center to center), and it comes with a matching crank handle that fits the 5/16 in. spindle. Used by many manufacturers.

By Prime-Line

9-1/2 Inch

This Prime-Line H 3571 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

EXACTLY what I needed and works like new.. Anonymous. Thu Oct 03 2024

By Prime-Line

This Prime-Line H 3949 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 13-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

By Prime-Line

This Prime-Line H 3516 casement operator is constructed of a diecast housing and crank handle, with a 8 inch steel arm and a hardened steel worm gear mechanism. It features a square body and mounts on the left side of the window, when viewing the window from the inside looking out. This operator is used on older steel-framed casement windows, with a pair of mounting holes spaced at 3-7/8 inch and another at 4-3/4 inch on center. A crank handle and installation fasteners are included with this casement operator.

By idh by St. Simons

Polished Chrome, 2.25" H x 12" W x 6.25" D

Precision machining, professional architectural grade quality and genuine solid brass are features that define this sliding rod casement adjuster. Designed for use on outswing hinged windows, this is an authentic period reproduction of an American classic. With its serrated knob, the window can be positioned in open and closed and any position in between.

Nice finish. Easy to install.. Jack. San Francisco, CA. Mon Jul 17 2017

By Prime-Line

The Prime-Line H 3558 jalousie operator is designed for use with a variety of jalousie windows, providing smooth and reliable functionality for both residential and commercial applications. This reversible operator features a non-handed design, allowing it to be installed on either left or right-handed windows for maximum versatility. Built to last, this diecast operator has a bronze finish, ensuring long-lasting performance and resistance to wear and tear. Comes with a matching t handle operator, three adjustable link arms, and all necessary mounting hardware. Installation requires only a Phillips head screwdriver for quick and simple setup. Mounting holes are spaced at 3-7/8 inch or 4-3/4 inch on center, with adjustable link arms for customized installation. For further dimensional information, please see the line drawing and compare with your needs before purchasing.

By Prime-Line

This Prime-Line H 4320 is an awning crank handle is white diecast and has a 11/32 inch bore spindle. This fits most awning operators with a 11/32 inch bore spindle such as the universal Prime-Line parts H 3554 or H 3555. It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 3-1/2 inch.

By Prime-Line

This is an awning operator of aluminum diecast construction with a gray baked enamel finish used on Pan-American Windows. It is left-handed with a matching crank handle with a 2-5/8 in. link arm. It has an L-shaped mounting hole pattern that has two top holes that are 5-1/4 in. from the center of the top holes to the center of the bottom hole and the two horizontal holes in the bottom leg are 1-5/16 in. on the center.

By Prime-Line

This is a heavy-duty pneumatic storm door closer for heavy weight wood or aluminum outswinging doors. It has a 1-1/2 in. barrel that is 10-3/8 in. long in a white finish. It comes complete with mounting brackets and attaching hardware. It has adjustable closing speed.

By Prime-Line

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

By Prime-Line

This casement operator cover is constructed from high impact plastic and it comes white in color. It fits Pella casement operators and similar styled casement windows. This is a right-hand operator replacement cover for Pella casement windows, as determined (handing) by facing the window from the inside; looking out. For left-hand operators of the same style, see Prime-Line part H 4095.

By Prime-Line

This is a casement crank handle is aluminum diecast and has a 5/168 inch bore spindle. This fits any operator with a 3/8 inch bore spindle such as the teardrop style casement operators (Prime-Line parts H 3502 and H 3508). It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 2-11/16 inch

By Prime-Line

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

By Prime-Line

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

By Prime-Line

19.2"H x 4.65" W x 1.4" D

This is a 10-3/4 in. right-handed dual arm operator with a 4-1/16 in. offset link arm. The long continuous arm and jointed arm create an action that pushes the sash open while pulling the hinge side of the sash to the open position. It is made of heavy-duty diecast zinc and protected with the corrosive resistant E-Gard coating process. Arm operator only, the operator base and crank handle are not included.

By Prime-Line

Black

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

By Prime-Line

Upgrade or replace your existing hardware with the Prime-Line K 5071 Screen and Storm Door Latch Set, designed for dependable performance and easy installation. This latch set is ideal for out-swinging wood or metal screen and storm doors ranging from 1 to 1-1/4 inch thick, providing a secure and functional solution without replacing the entire door. It features a convenient push-button exterior handle paired with a reliable interior latch, all constructed from durable metal with a sleek aluminum finish to complement most home exteriors. The non-handed design allows for installation on both left- and right-swinging doors, making it versatile and DIY-friendly. For added peace of mind, the included night lock enhances security by allowing the door to be locked from the inside only. This complete set includes all necessary components—strike, keeper, fasteners, and installation instructions—making it a practical, cost-effective upgrade for maintaining and securing your door.

By Prime-Line

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

By Prime-Line

Latches are exactly the correct items. I also loved the quantity for the price.. Anonymous. Fri Mar 28 2025

By Prime-Line

This cylinder guard is constructed from heavy steel and comes plated in brass. It features an exterior-mounted plate that covers your rim cylinder face from tampering. Includes four through door bolts for additional security.

Shiny and good looks nice. Jessica. New York, NY. Sat Feb 14 2026

By Prime-Line

This is one of several keepers or strikes used by the various casement, project-out, transom, or hopper window locks. It provides a surface for the lock to strike against while causing the lock to tighten as it slides up the angled surface of the strike. Made of diecast, it has mounting holes of 1-3/8 in. on the center.

By Prime-Line

White, 9.35" H x 3.75" W x 0.85" D

This Prime-Line folding crank handle fits most casement operator crank spindles. It is diecast construction with a coppertone finish. The 11/32 inch spline system will only fit 11/32 inch casement operators. It is easy to install. The folding design is often used to replace the normal crank handle to avoiding interference with window blinds.

Didn’t work. Maybe with only particular windows but how could you know.. Sally. Detroit, MI. Wed Nov 27 2024

By Prime-Line

3.6" H x 3.8" W x 0.85" D, Zinc Plated

Prime‑Line® machine screws provide strong, reliable fastening for everyday home repair and improvement projects, making them an ideal choice for DIY homeowners across the U.S. Designed for metal‑to‑metal or metal‑to‑plastic applications, these precision‑threaded screws deliver a secure hold, consistent performance, and long‑lasting durability for furniture repair, appliance maintenance, door and window hardware, and electrical fixtures. For best results, Prime‑Line machine screws are intended for use with same‑size matching nuts and washers, helping distribute load, improve holding strength, and create a more secure, vibration‑resistant connection. Engineered for smooth, easy installation using standard tools, Prime‑Line hardware helps you finish repairs quickly and confidently. Backed by a trusted name in home repair, Prime‑Line makes it easy to find compatible fasteners and complete the job right the first time.

By Prime-Line

Gray, 30.13" H x 3.75" W x 1" D

This Prime-Line Adjustable Sliding Door Lock features a telescopic design that allows it to adjust to fit nearly all standard patio door openings. The lock bar is adjustable to accommodate openings from 28 inch to 48 inch Secure your door in an open position, so you can safely allow fresh air into your home. When not in use, simply swing the metal security bar up and out of the way. Unlike typical patio door patio door lock bar, this door lock stick does not require you to cut the unit down to size with a saw. You simply press in the tension release clip to extend the length or reduce the length. Constructed of aluminum with an aluminum finish, the patio safety bar prevents doors from being forced open. Please refer to the line art drawing for dimensions and compare to your needs before purchasing.

Perfect for securing my sliding glass door. Glad I found it.. Carolyn. Louisville, KY. Sat Feb 21 2026

By Prime-Line

Designed for use with a concealed latching mechanism, it assembles easily with a push nut fastener. This lever set has a 1-5/8 in. outside diameter, and it features an overall reach of 2-13/16 inches with a flat, slotted emergency-access knob on the exterior. Lever sets like these are used to replace broken and missing lever and knob sets of concealed latches. This Lever set is used by Sanymetal for use with steel doors, and it is easy to install. Note: Assembly will be permanent upon the first unification of both parts. Attempting to separate the inside and outside knobs once joined may damage the internal push nut component.

By Prime-Line

This garage door quick turn fixture is constructed from heavy-duty galvanized steel. It is designed for use in low headroom garage door conditions. It is perfect for use where automatic openers are installed.

By Prime-Line

This latch is for use on your out-swinging wood or metal screen or storm doors. It features a contemporary design with a tie-down screw at bottom of the handle and comes complete with a night lock. For use on doors that are 1 in. to 1-1/4 in. thick.