23 In Window Block And Tackle Sash Balance Primeline Fa 2220

This non-tilt block and tackle channel balance is constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord and pulley system, but the plastic top and bottom guide shoes must be selected separately as they are not included with the balance itself. These window counter balances are used to counter-weight the moving sash on single and double hung vinyl windows. If your windows (sashes), are having problems staying up when opened, it may be that your sash balances or hardware needs to be replaced. The sash balances hold the weight of the window pane, over time, the springs can wear out or fail. Replace your sash balance for a smoother operation of your window and allow fresh air to enter your home with a window that stays open.

This plastic sash cam fits onto the upper top sides of the window (vent) that is sliding up or down. The sash cam and window then rest on the top guide of the sash balance. It has dimensions of the top being 1 in. wide by 5/8 in. deep and 1-5/16 in. tall. The width of this top guide needs to fit correctly in the window's track frame for it to slide up or down properly, and the depth allows the window to correctly rest on the top guide of the sash balance.

This is an assortment of the most common sash balance top and bottom guides. It contains the 2 most common top guides and 3 of the most common bottom guides. It also contains 2 rivets to install the top and bottom guide of your choice. In addition, there is one take-out clip. Most of the time this kit will provide what is needed to finish installing 1 sash balance. Be sure to order the H 3740 riveting tool.

This backplate is constructed of stamped steel and comes in a nickel plated finish. It is used to cover marred doors, and allows for conversion of a 2-3/8 inch backset to a 2-3/4 inch backset or vice versa.

These rivets are constructed of aluminum and come in a milled aluminum finish. They are corrosion and rust-resistant rivets that can be used in the harshest of weather conditions. These rivets feature hollow tips to allow for easy flaring for fastening different parts and components. These rivets in particular are used to install sash guides onto the channel balances of vinyl liners, as used in single hung and double hung vertical sliding windows. Using only a few simple tools, these rivets are easy to install.

This operator cover is constructed from diecast Zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This is a spiral balance pivot bar. It has a 5/16 in. width and 3 in. overall length. Comes in a zinc plated finish and is found on the bottom of a hung sash.

Myles. New City, NY. Tue Jan 13 2026

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

Prime-line part F 2911 is a window sash lock for use on single-hung and double-hung vertical sliding windows. This item includes a sash lock, keeper, fasteners, and easy-to-follow installation instructions. These beige-painted locks are constructed of diecast and fit windows manufactured by crystal windows. The locks and keepers are coated with a corrosion-resistant, long-lasting painted finish. Prime-line sash locks like these are used nationwide, but they are typically found in homes and apartments in new york and Pennsylvania. Sash locks like these are used by many to replace damaged or missing locks and install them easily with a simple Phillips head screwdriver.

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

This cam action window sash lock is constructed of stamped steel, and it comes in a white painted finish. It features a strong diecast lever, and its universal design allows it to fit with multiple manufacturer's windows. Lock is designed for use on vertical sliding windows constructed of wood, and can be used on both single and double hung sliding windows.

This is a rivet set tool used to fasten semi-tubular rivets. It secures a rivet which joins top and bottom guides to sash balance channel.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

This swivel end sash rod is a perfect low-profile drapery hanging option for any door window, side light or smaller window. The rod has a 1/2-inch total projection to neatly hang your favorite french door panel, tiers or valance. This sash rod extends for the perfect width between 21 and 38-inches. The rod is 5/16-inch in diameter and perfect for any size rod pocket panel. The brackets can be positioned forward facing for outside a window casing mount or side facing for inside a window casing mount. Set contains one rod, two brackets, four screws and instructions. Tools needed for installation: screwdriver and measuring tape. This product covers every need in drapery hardware from tension rods, café rods to extenders, sash rods and more.

Good enough to get the job done.. Richard. Woodridge, IL. Thu Jun 18 2026

This non-tilt block and tackle channel balance is constructed of a mill-finished steel U-frame housing. The internal working components include a spring, cord and pulley system, but the plastic top and bottom guide shoes must be selected separately as they are not included with the balance itself. These window counter balances are used to counter-weight the moving sash on single and double hung vinyl windows. If your windows (sashes), are having problems staying up when opened, it may be that your sash balances or hardware needs to be replaced. The sash balances hold the weight of the window pane, over time, the springs can wear out or fail. Replace your sash balance for a smoother operation of your window and allow fresh air to enter your home with a window that stays open.

Secure your sliding windows quickly and easily with the Prime-Line U 98198 Aluminum Sliding Window Security Lock. Designed for horizontal sliding windows, this lock provides a simple and effective way to increase home safety by limiting window movement in either a fully closed or partially open (ventilation) position. It’s an ideal secondary lock for adding an extra layer of protection without replacing existing hardware. The built-in thumb turn screw allows for quick tightening, firmly securing the lock onto the window track. This creates a reliable hold that helps prevent forced entry while still allowing controlled airflow when positioned for ventilation. Its tool-free installation makes it perfect for renters, homeowners, or anyone looking for a quick security upgrade without drilling or permanent modifications. Constructed from durable aluminum, this sliding window lock is designed for strength and everyday reliability. The matte black finish offers a clean, low-profile look that blends easily with most window frames. It is specifically designed to fit window rails up to 1/8 inch wide, ensuring proper compatibility with many metal sliding window systems. Whether you're improving security, adding child safety measures, or enhancing ventilation control, this window lock delivers a dependable and convenient solution. For best results, review the line drawing to confirm fit before purchasing.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

Do you have vertical sliding wood windows with loose-fitting, worn or missing locks? Besides adding a “new look” to your windows with a fresh set of locking hardware, these sash locks can help add peace of mind by restoring the security features on vertical sliding windows. These locks mount on wooden single-hung and double-hung vertical sliding windows. Each lock features a cam-type mechanism that is designed to draw the keeper in firmly towards the lock, providing your windows with tighter seals, better weatherizing, and increased security. They are constructed of stamped steel lock bases and keepers and feature diecast zinc levers. Each come in a corrosion-resistant, industry standard finish to match other existing hardware that may already be in the home. Depending on the size of the sash, these locks can be used as singles or in pairs. Each set includes one lock and keeper, installation fasteners and simple instructions. Installation of these sash locks is easy and can be done with a simple handheld Phillips head screwdriver. Other design features include a low-profile keeper, cam-action fastening, 1-3/4 inch mounting hole centers on the lock, and 1-1/2 hole centers on the keeper. These sash locks are for use on older vertical sliding wood windows where the checkrails (also known as “meeting rails”) of both the inner and outer sash rest flush. Compare the style and dimensions of this lock to those required on your sliding windows and order yours today.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This Sash Lock by Prime-Line Products is constructed of steel and comes in a beautiful, corrosion resistant, satin nickel-plated finish. It is a heavy-duty grade sash lock and features a cam-style latch action that provides a strong, rattle-resistant lock. Sash locks like these are used on both single hung and double hung, vertical sliding wood windows. For best results, follow the installation instructions included with each package. Using only a few simple tools, these locks are easy to install.

Brian. Oakland, CA. Thu Dec 26 2024

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This Prime-Line H 3571 Right-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

EXACTLY what I needed and works like new.. Anonymous. Thu Oct 03 2024

Prime-Line part F 2926 contains a pair of spring-loaded Tilt Latches and easy-to-follow installation instructions. These tilt latches install on single- and double-hung vertical sliding, tilt-in vinyl sash panels. Vertical sliding windows with tilt-in sash allow for easier cleaning of hard-to-reach exterior glass surfaces.Each latch is constructed of durable .373 plastic and they are equipped with corrosion-resistant, long-lasting steel springs. These latches keep each vertical sliding panel locked into their respective paths of travel. Simultaneous disengaged latches allow the sash to tilt inward for thorough cleaning, or tilted in then rotated clockwise or counter-clockwise for easy removal of the sash from window frame.Prime-Line tilt latches like these are used in North Carolina and other states. Each package includes one right-hand and one left-hand latch. These latches are used by many to replace damaged or missing tilt latches and they are easy to install.

Used to counter-weight the moving sash on single and double-hung windows. Fits window styles that tilt in for cleaning. Conveniently has the Prime-Line part FS 341 pre-installed.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. All the necessary installation hardware is included for a quick and easy installation. A Phillips head screwdriver will be required for installation.

This is a sash lock and keeper. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum of projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

These awning operators are constructed of high pressure diecast zinc and the case and crank come in a white-colored baked enamel finish. Each operator features a simple detach clip which allows the operator to disengage from the sash's center hook for quick and easy window release. This awning operator mounts on the bottom window sill of crank out awning windows, and holds the sash open at the user's desired location. These operators replace others whose roto gears may have become worn and stripped, or the spline to which the hand cranks attach. Included with each is the operator, a crank, a sash hook and installation fasteners.

This is a pair of stainless steel hinges used on casement or projecting windows. This type of hinge is used by a variety of window manufacturers of wood or vinyl casement windows. When selecting the correct hinge compare the length of the mounting bracket with the length of the bracket from the window hinge to be replaced. Also note whether there are 4 different bars; 3 actuating bars and 1 mounting bracket.

This is a sliding window lock that is keyed and securely locks window in closed or ventilating position. Securely locks window in closed or ventilating position.

Deltana Window Locks are designed to add security and beauty to windows.

This were shipped fast and look great. I can't wait to install them on my windows. I will update their performance once installed.. Nicole. Annapolis, MD. Mon Mar 06 2017

This Prime-Line H 3570 Left-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for right-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of bronze diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 13-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

Very easy to do the job of removing the old broken unit and installing the new one. The new unit came in on the day that they said it would. Will order more as needed.. Anonymous. Tue Sep 03 2024

This is a Roto gear awning operator constructed of high pressure diecast zinc. The case and crank handle have a bronze baked enamel finish. A simple detach feature allows the operator to disengage from the sash for quick window release. Includes 1 center sash hook.

The Prime-Line F 2858 Cam Action Window Lock replaces or upgrades the sash lock on single and double hung vinyl windows. This small window latch is constructed from diecast and comes finished in classic bronze. Mounting hardware included. A Phillips head screwdriver is required for installation. The window latch replacement features a cam action hook which draws the classic bronze sash lock keeper tight when locked. The body of the prime-line window latch has anti-jimmy studs which engage the keeper of the window lock replacement. For further dimensional information, please see the line drawing.

I bought these to rejuvenate our décor. The color is perfect (black), but the overall quality was not as good as the ones I was taking out from two decade ago (no big surprise there, I guess). Quality is notoriously missing from many, many items here. Reason: made in China.. Alexander. CO. Fri Mar 03 2023

This is an awning operator of aluminum diecast construction with a gray baked enamel finish used on Pan-American Windows. It is left-handed with a matching crank handle with a 2-5/8 in. link arm. It has an L-shaped mounting hole pattern that has two top holes that are 5-1/4 in. from the center of the top holes to the center of the bottom hole and the two horizontal holes in the bottom leg are 1-5/16 in. on the center.

This operator cover is constructed from diecast zinc. This type of operator cover is designed to snap onto the worm housing of the truth entry guard operator.

Deltana Window Locks are designed to add security and beauty to windows.

Trevor. London, ON. Sun Dec 10 2017

This operator cover is constructed from diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the truth entrygard operator.

These spiral balances are used for non-tilt windows, the red bushing spiral balance indicates that it will lift up to 25 pounds. Used to counter-weight the moving sash on single and double-hung windows. Fits window styles that tilt in for cleaning. This spiral balance does not include an end clip and must be ordered separately.

This is a sash lock and keeper. Constructed from diecast zinc it comes in a white finish. They are found on a variety of sashes and due to their design are often used as a child safety lock. The slim-line design allows a minimum projection for a maximum unobstructed view. A Phillips head screwdriver will be required for installation.

This operator cover is constructed from Diecast zinc. It comes finished in a white finish and features contemporary styling. This type of operator cover is designed to snap onto the worm housing of the Truth Entrygard operator.

This is a bronze casement operator that has been used on wood and vinyl windows for the last 35 years. It is left-handed as viewed from the inside looking out. The body is bronze diecast with a steel worm gear driving a 9-1/2 in. painted steel arm with a plastic guide button on the tip. The guide button glides through the track Prime-Line part H 3530. It contains one operator, 1 crank handle, and installation screws. For matching right-hand operator use Prime-Line part H 3569.

This Prime-Line H 3864 Left-Hand Casement Operator features a guide button that easily glides through the track. This casement window handle is used by a variety of wood and vinyl window manufacturers. Designed for left-handed casement windows. It is right-handed as viewed from the inside looking out. The body of the window handle crank is constructed of white diecast, with a steel arm and worm gear. The arm of the casement window crank handle replacement measures 9-1/2 inch from the middle of the guide button to the middle of the crank operator while closed. For further dimensional information, please see the line drawing (not universal).

This sliding window roller assembly is constructed from nylon. It is attached to nylon housing and has flat edge tandem rollers. This style roller is used by a variety of window manufacturers.

This is an RV/Trailer right-hand sliding window sash lock. It has a chrome finish and is diecast zinc. This package of two contains 2 locks, 2 bushings and 2 installation screws. Includes plastic bushing, no keeper is required. The lock engages the fixed rail of the window to hold the vent shut.